From dec279fa300243bc3c5afe039a5ff6f1fc3264de Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Tue, 16 Mar 2010 01:42:50 +0000 Subject: 1. Features of mahogany. The code can run on the Mahogany board, which is one of sample boards made by AMD. Its major features are: CPU (only K8 system): * AMD AM2+ * AMD Athlon 64 x2 * AMD Athlon 64 FX * AMD Athlon 64 * AMD Sempron CPUs System Chipset: * RS780E * SB700 On Board Chipset: * BIOS - SPI * Azalia CODEC - Realtek ALC888 * LPC SuperIO - ITE8718F(GX). * LAN - REALTEK 8111C * TPM - SLB9635TT1.2 Main Memory: * DDR II * 4 (Max 4GB) Expansion Slots: * PCI Express X16 slot*2 (PCI-E X8 Bus) * PCI Express X4 Slot*1 Intersil PWM: * Controller - Intersil 6323 2. The ACPI feature is already added. I suggest that firstly we can test the board without the ACPI by setting the HAVE_ACPI_TABLE as 0. With Rev F processor, the HT link can only work in HT1, whose max frequency is 1GHz. Signed-off-by: Zheng Bao Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5220 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/amd/mahogany/devicetree.cb | 124 +++++++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 src/mainboard/amd/mahogany/devicetree.cb (limited to 'src/mainboard/amd/mahogany/devicetree.cb') diff --git a/src/mainboard/amd/mahogany/devicetree.cb b/src/mainboard/amd/mahogany/devicetree.cb new file mode 100644 index 0000000000..2cc3baf837 --- /dev/null +++ b/src/mainboard/amd/mahogany/devicetree.cb @@ -0,0 +1,124 @@ +#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default) +#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7) +#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3, +# 1: the system allows a PCIE link to be established on Dev2 or Dev3. +#Define gfx_dual_slot, 0: single slot, 1: dual slot +#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable +#Define gfx_tmds, 0: didn't support TMDS, 1: support +#Define gfx_compliance, 0: didn't support compliance, 1: support +#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration +#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16 +chip northbridge/amd/amdk8/root_complex + device apic_cluster 0 on + chip cpu/amd/socket_AM2 + device apic 0 on end + end + end + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on # southbridge + chip southbridge/amd/rs780 + device pci 0.0 on end # HT 0x9600 + device pci 1.0 on end # Internal Graphics P2P bridge 0x9602 + device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603 + device pci 3.0 on end # PCIE P2P bridge 0x960b + device pci 4.0 on end # PCIE P2P bridge 0x9604 + device pci 5.0 off end # PCIE P2P bridge 0x9605 + device pci 6.0 off end # PCIE P2P bridge 0x9606 + device pci 7.0 off end # PCIE P2P bridge 0x9607 + device pci 8.0 off end # NB/SB Link P2P bridge + device pci 9.0 on end # + device pci a.0 on end # + register "gppsb_configuration" = "1" # Configuration B + register "gpp_configuration" = "3" # Configuration D default + register "port_enable" = "0x6fc" + register "gfx_dev2_dev3" = "1" + register "gfx_dual_slot" = "1" + register "gfx_lane_reversal" = "0" + register "gfx_tmds" = "0" + register "gfx_compliance" = "0" + register "gfx_reconfiguration" = "1" + register "gfx_link_width" = "0" + end + chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # USB + device pci 12.1 on end # USB + device pci 12.2 on end # USB + device pci 13.0 on end # USB + device pci 13.1 on end # USB + device pci 13.2 on end # USB + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic #dimm 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic #dimm 0-1-1 + device i2c 53 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/ite/it8718f + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.2 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.4 off end # EC + device pnp 2e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.6 on # Mouse + irq 0x70 = 12 + end + device pnp 2e.7 off # GPIO, must be closed for unresolved reason. + end + device pnp 2e.8 off # MIDI + io 0x60 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.9 off # GAME + io 0x60 = 0x220 + end + device pnp 2e.a off end # CIR + end #superio/ite/it8718f + end #LPC + device pci 14.4 on end # PCI 0x4384 + device pci 14.5 on end # USB 2 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + register "hda_viddid" = "0x10ec0882" + end #southbridge/amd/sb700 + end # device pci 18.0 + + device pci 18.0 on end + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end #northbridge/amd/amdk8 + end #pci_domain +end #northbridge/amd/amdk8/root_complex + -- cgit v1.2.3