From 4ebdf34e13fc3e61a6dcc60b44aa9b621a0f84ac Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Tue, 8 Jan 2019 09:32:44 +0200 Subject: AGESA fam14 boards: Clean up devicetree MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove double nesting of chip northbridge/amd. There is requirement to keep SPD address map in the same chip block with device 0:18.2. Change-Id: Ib212f24c3d697a009d2ca8e2c77220de4bfb7573 Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/c/30733 Reviewed-by: Angel Pons Reviewed-by: Paul Menzel Reviewed-by: Michał Żygowski Reviewed-by: HAOUAS Elyes Tested-by: build bot (Jenkins) --- src/mainboard/amd/inagua/devicetree.cb | 109 +++++++++++++++++---------------- 1 file changed, 55 insertions(+), 54 deletions(-) (limited to 'src/mainboard/amd/inagua') diff --git a/src/mainboard/amd/inagua/devicetree.cb b/src/mainboard/amd/inagua/devicetree.cb index ce1a893f93..578c654afd 100644 --- a/src/mainboard/amd/inagua/devicetree.cb +++ b/src/mainboard/amd/inagua/devicetree.cb @@ -20,61 +20,60 @@ chip northbridge/amd/agesa/family14/root_complex end device domain 0 on subsystemid 0x1022 0x1510 inherit - chip northbridge/amd/agesa/family14 # CPU side of HT root complex -# device pci 18.0 on # northbridge - chip northbridge/amd/agesa/family14 # PCI side of HT root complex - device pci 0.0 on end # Root Complex - device pci 1.0 on end # Internal Graphics P2P bridge, 9802 to 9806 - device pci 1.1 on end # Internal HDMI Audio - device pci 4.0 on end # PCIE P2P bridge MXM lane 0 - device pci 5.0 off end # PCIE P2P bridge MXM lane 1 - device pci 6.0 on end # PCIE P2P bridge LAN - device pci 7.0 on end # PCIE P2P bridge MINIPCIE SLOT1 - device pci 8.0 off end # NB/SB Link P2P bridge - end # agesa northbridge + chip northbridge/amd/agesa/family14 + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge, 9802 to 9806 + device pci 1.1 on end # Internal HDMI Audio + device pci 4.0 on end # PCIE P2P bridge MXM lane 0 + device pci 5.0 off end # PCIE P2P bridge MXM lane 1 + device pci 6.0 on end # PCIE P2P bridge LAN + device pci 7.0 on end # PCIE P2P bridge MINIPCIE SLOT1 + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge - chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus - device pci 11.0 on end # SATA - device pci 12.0 on end # OHCI USB 0-4 - device pci 12.2 on end # EHCI USB 0-4 - device pci 13.0 on end # OHCI USB 5-9 - device pci 13.2 on end # EHCI USB 5-9 - device pci 14.0 on # SM - chip drivers/generic/generic #dimm 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic #dimm 0-0-1 - device i2c 51 on end - end - end # SM - device pci 14.1 on end # IDE 0x439c - device pci 14.2 on end # HDA 0x4383 - device pci 14.3 on # LPC 0x439d - chip superio/smsc/kbc1100 - device pnp 2e.7 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - end # kbc1100 - end #LPC - device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} - device pci 14.5 on end # OHCI FS/LS USB - device pci 14.6 on end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) - device pci 15.0 on end # PCIe PortA Express Card - device pci 15.1 on end # PCIe PortB NEC USB3.0 - device pci 15.2 on end # PCIe PortC MINIPCIE SLOT2 - device pci 15.3 on end # PCIe PortD PCIE X1 SLOT - device pci 16.0 on end # OHCI USB 10-13 - device pci 16.2 on end # EHCI USB 10-13 - register "gpp_configuration" = "4" #1:1:1:1 - register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE - end #southbridge/amd/cimx/sb800 -# end # device pci 18.0 -# These seem unnecessary + chip southbridge/amd/cimx/sb800 + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/smsc/kbc1100 + device pnp 2e.7 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + end # kbc1100 + end #LPC + device pci 14.4 off end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 on end # OHCI FS/LS USB + device pci 14.6 on end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 on end # PCIe PortA Express Card + device pci 15.1 on end # PCIe PortB NEC USB3.0 + device pci 15.2 on end # PCIe PortC MINIPCIE SLOT2 + device pci 15.3 on end # PCIe PortD PCIE X1 SLOT + device pci 16.0 on end # OHCI USB 10-13 + device pci 16.2 on end # EHCI USB 10-13 + register "gpp_configuration" = "4" #1:1:1:1 + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + end #southbridge/amd/cimx/sb800 + + chip northbridge/amd/agesa/family14 + + # These seem unnecessary device pci 18.0 on end - #device pci 18.0 on end device pci 18.1 on end device pci 18.2 on end device pci 18.3 on end @@ -87,6 +86,8 @@ chip northbridge/amd/agesa/family14/root_complex { { {0xA0, 0xA2}, {0x00, 0x00}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses }" - end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + + end # agesa northbridge + end #domain end #northbridge/amd/agesa/family14/root_complex -- cgit v1.2.3