From f03360f3f87f9c03a9550c5f4cf3917fdbe56619 Mon Sep 17 00:00:00 2001 From: Kerry Sheh Date: Thu, 19 Jan 2012 13:25:55 +0800 Subject: Inagua: Indent and wihtespace cleanup Change-Id: Ie574e08f138c88084c8ce06d0d0acc489013e3d7 Signed-off-by: Kerry Sheh Signed-off-by: Kerry Sheh Reviewed-on: http://review.coreboot.org/547 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones --- src/mainboard/amd/inagua/get_bus_conf.c | 158 ++++++++++++++++---------------- 1 file changed, 79 insertions(+), 79 deletions(-) (limited to 'src/mainboard/amd/inagua/get_bus_conf.c') diff --git a/src/mainboard/amd/inagua/get_bus_conf.c b/src/mainboard/amd/inagua/get_bus_conf.c index 13d198ab62..229477d745 100644 --- a/src/mainboard/amd/inagua/get_bus_conf.c +++ b/src/mainboard/amd/inagua/get_bus_conf.c @@ -31,19 +31,19 @@ /* Global variables for MB layouts and these will be shared by irqtable mptable -* and acpi_tables busnum is default. -*/ + * and acpi_tables busnum is default. + */ u8 bus_isa; u8 bus_sb800[3]; u32 apicid_sb800; /* -* Here you only need to set value in pci1234 for HT-IO that could be installed or not -* You may need to preset pci1234 for HTIO board, -* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail -*/ + * Here you only need to set value in pci1234 for HT-IO that could be installed or not + * You may need to preset pci1234 for HTIO board, + * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + */ u32 pci1234x[] = { - 0x0000ff0, + 0x0000ff0, }; u32 bus_type[256]; @@ -55,81 +55,81 @@ static u32 get_bus_conf_done = 0; void get_bus_conf(void) { u32 apicid_base; - u32 status; - - device_t dev; - int i, j; - - if (get_bus_conf_done == 1) - return; /* do it only once */ - - get_bus_conf_done = 1; - -/* - * This is the call to AmdInitLate. It is really in the wrong place, conceptually, - * but functionally within the coreboot model, this is the best place to make the - * call. The logically correct place to call AmdInitLate is after PCI scan is done, - * after the decision about S3 resume is made, and before the system tables are - * written into RAM. The routine that is responsible for writing the tables is - * "write_tables", called near the end of "hardwaremain". There is no platform - * specific entry point between the S3 resume decision point and the call to - * "write_tables", and the next platform specific entry points are the calls to - * the ACPI table write functions. The first of ose would seem to be the right - * place, but other table write functions, e.g. the PIRQ table write function, are - * called before the ACPI tables are written. This routine is called at the beginning - * of each of the write functions called prior to the ACPI write functions, so this - * becomes the best place for this call. - */ - status = agesawrapper_amdinitlate(); - if(status) { - printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); - } - - sbdn_sb800 = 0; - - for (i = 0; i < 3; i++) { - bus_sb800[i] = 0; - } - - for (i = 0; i < 256; i++) { - bus_type[i] = 0; /* default ISA bus. */ - } - - bus_type[0] = 1; /* pci */ - -// bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; - bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; - - /* sb800 */ - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); - - if (dev) { - bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - for (j = bus_sb800[1]; j < bus_isa; j++) - bus_type[j] = 1; - } - - for (i = 0; i < 4; i++) { - dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); - if (dev) { - bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; - } - } - - for (j = bus_sb800[2]; j < bus_isa; j++) - bus_type[j] = 1; - - /* I/O APICs: APIC ID Version State Address */ - bus_isa = 10; + u32 status; + + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* do it only once */ + + get_bus_conf_done = 1; + + /* + * This is the call to AmdInitLate. It is really in the wrong place, conceptually, + * but functionally within the coreboot model, this is the best place to make the + * call. The logically correct place to call AmdInitLate is after PCI scan is done, + * after the decision about S3 resume is made, and before the system tables are + * written into RAM. The routine that is responsible for writing the tables is + * "write_tables", called near the end of "hardwaremain". There is no platform + * specific entry point between the S3 resume decision point and the call to + * "write_tables", and the next platform specific entry points are the calls to + * the ACPI table write functions. The first of ose would seem to be the right + * place, but other table write functions, e.g. the PIRQ table write function, are + * called before the ACPI tables are written. This routine is called at the beginning + * of each of the write functions called prior to the ACPI write functions, so this + * becomes the best place for this call. + */ + status = agesawrapper_amdinitlate(); + if(status) { + printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status); + } + + sbdn_sb800 = 0; + + for (i = 0; i < 3; i++) { + bus_sb800[i] = 0; + } + + for (i = 0; i < 256; i++) { + bus_type[i] = 0; /* default ISA bus. */ + } + + bus_type[0] = 1; /* pci */ + + // bus_sb800[0] = (sysconf.pci1234[0] >> 16) & 0xff; + bus_sb800[0] = (pci1234x[0] >> 16) & 0xff; + + /* sb800 */ + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, 4)); + + if (dev) { + bus_sb800[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_sb800[1]; j < bus_isa; j++) + bus_type[j] = 1; + } + + for (i = 0; i < 4; i++) { + dev = dev_find_slot(bus_sb800[0], PCI_DEVFN(sbdn_sb800 + 0x14, i)); + if (dev) { + bus_sb800[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } + } + + for (j = bus_sb800[2]; j < bus_isa; j++) + bus_type[j] = 1; + + /* I/O APICs: APIC ID Version State Address */ + bus_isa = 10; apicid_base = CONFIG_MAX_CPUS; apicid_sb800 = apicid_base; #if CONFIG_AMD_SB_CIMX - sb_Late_Post(); + sb_Late_Post(); #endif } -- cgit v1.2.3