From 809e29ec8fdf49f65f87076005bbc778b9f10caa Mon Sep 17 00:00:00 2001 From: Nils Jacobs Date: Mon, 1 Nov 2010 14:36:54 +0000 Subject: GX2: Clean up some white space and comments. Also, add a copyright header to pll_reset.c. Signed-off-by: Nils Jacobs Acked-by: Uwe Hermann git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6009 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/include/cpu/amd/gx2def.h | 181 ++++++++++++++++++------------------------- 1 file changed, 74 insertions(+), 107 deletions(-) (limited to 'src/include/cpu/amd') diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h index b58569deb8..eaaeca4328 100644 --- a/src/include/cpu/amd/gx2def.h +++ b/src/include/cpu/amd/gx2def.h @@ -1,5 +1,6 @@ #ifndef CPU_AMD_GX2DEF_H #define CPU_AMD_GX2DEF_H + #define CPU_ID_1_X 0x540 /* Stepping ID 1.x*/ #define CPU_ID_2_0 0x551 /* Stepping ID 2.0*/ #define CPU_ID_2_1 0x552 /* Stepping ID 2.1*/ @@ -13,6 +14,7 @@ #define CPU_REV_2_1 0x021 #define CPU_REV_2_2 0x022 #define CPU_REV_3_0 0x030 + /* GeodeLink Control Processor Registers, GLIU1, Port 3 */ #define GLCP_CLK_DIS_DELAY 0x4c000008 #define GLCP_PMCLKDISABLE 0x4c000009 @@ -37,28 +39,27 @@ #define GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE 8 #define GLCP_SYS_RSTPLL_CHIP_RESET 0 -/* MSR routing as follows*/ -/* MSB = 1 means not for CPU*/ -/* next 3 bits 1st port*/ -/* next3 bits next port if through an GLIU*/ -/* etc...*/ +/* MSR routing as follows */ +/* MSB = 1 means not for CPU */ +/* next 3 bits 1st port */ +/* next3 bits next port if through an GLIU */ +/* etc... */ -/*Redcloud as follows.*/ +/* Redcloud as follows. */ /* GLIU0*/ -/* port0 - GLIU0*/ -/* port1 - MC*/ -/* port2 - GLIU1*/ -/* port3 - CPU*/ -/* port4 - VG*/ -/* port5 - GP*/ -/* port6 - DF*/ +/* port0 - GLIU0 */ +/* port1 - MC */ +/* port2 - GLIU1 */ +/* port3 - CPU */ +/* port4 - VG */ +/* port5 - GP */ +/* port6 - DF */ /* GLIU1*/ -/* port1 - GLIU0*/ -/* port3 - GLCP*/ -/* port4 - PCI*/ -/* port5 - FG*/ - +/* port1 - GLIU0 */ +/* port3 - GLCP */ +/* port4 - PCI */ +/* port5 - FG */ #define GL0_GLIU0 0 #define GL0_MC 1 @@ -78,7 +79,7 @@ #define MSR_GLIU0 (GL0_GLIU0 << 29) + (1 << 28) /* 1000xxxx - To get on GeodeLink one bit has to be set */ #define MSR_MC (GL0_MC << 29) /* 2000xxxx */ #define MSR_GLIU1 (GL0_GLIU1 << 29) /* 4000xxxx */ -#define MSR_CPU (GL0_CPU << 29) /* 6000xxxx - this is not used for BIOS since code executing on CPU doesn't need to be routed*/ +#define MSR_CPU (GL0_CPU << 29) /* 6000xxxx - this is not used for BIOS since code executing on CPU doesn't need to be routed */ #define MSR_VG (GL0_VG << 29) /* 8000xxxx */ #define MSR_GP (GL0_GP << 29) /* A000xxxx */ #define MSR_DF (GL0_DF << 29) /* C000xxxx */ @@ -88,14 +89,11 @@ #define MSR_FG (GL1_FG << 26) + MSR_GLIU1 /* 5400xxxx */ #define MSR_VIP ((GL1_VIP << 26) + MSR_GLIU1) /* 5400xxxx */ #define MSR_AES ((GL1_AES << 26) + MSR_GLIU1) /* 5800xxxx */ -/* South Bridge*/ -#define SB_PORT 2 /* port of the SouthBridge */ - -/**/ -/*GeodeLink Interface Unit 0 (GLIU0) port0*/ -/**/ +/* South Bridge */ +#define SB_PORT 2 /* port of the SouthBridge */ +/* GeodeLink Interface Unit 0 (GLIU0) port0 */ #define GLIU0_GLD_MSR_CAP (MSR_GLIU0 + 0x2000) #define GLIU0_GLD_MSR_PM (MSR_GLIU0 + 0x2004) @@ -103,10 +101,7 @@ #define GLIU0_CAP (MSR_GLIU0 + 0x86) #define GLIU0_GLD_MSR_COH (MSR_GLIU0 + 0x80) - -/**/ -/* Memory Controller GLIU0 port 1*/ -/**/ +/* Memory Controller GLIU0 port 1 */ #define MC_GLD_MSR_CAP (MSR_MC + 0x2000) #define MC_GLD_MSR_PM (MSR_MC + 0x2004) @@ -129,7 +124,6 @@ #define CF07_LOWER_REF_TEST_SET (1 << 3) #define CF07_LOWER_PROG_DRAM_SET (1 << 0) - #define MC_CF8F_DATA (MSR_MC + 0x19) #define CF8F_UPPER_XOR_BS_SHIFT 19 @@ -164,19 +158,13 @@ #define MC_CF_RDSYNC (MSR_MC + 0x1F) - -/**/ -/* GLIU1 GLIU0 port2*/ -/**/ +/* GLIU1 GLIU0 port2 */ #define GLIU1_GLD_MSR_CAP (MSR_GLIU1 + 0x2000) #define GLIU1_GLD_MSR_PM (MSR_GLIU1 + 0x2004) #define GLIU1_GLD_MSR_COH (MSR_GLIU1 + 0x80) - -/**/ -/* CPU ; does not need routing instructions since we are executing there.*/ -/**/ +/* CPU ; does not need routing instructions since we are executing there. */ #define CPU_GLD_MSR_CAP 0x2000 #define CPU_GLD_MSR_CONFIG 0x2001 #define CPU_GLD_MSR_PM 0x2004 @@ -200,7 +188,7 @@ #define CPU_AC_MSR 0x1301 #define CPU_EX_BIST 0x1428 -/*IM*/ +/* IM */ #define CPU_IM_CONFIG 0x1700 #define IM_CONFIG_LOWER_ICD_SET (1 << 8) #define IM_CONFIG_LOWER_QWT_SET (1 << 20) @@ -215,13 +203,13 @@ #define CPU_IM_BIST_TAG 0x1730 #define CPU_IM_BIST_DATA 0x1731 - /* various CPU MSRs */ #define CPU_DM_CONFIG0 0x1800 #define DM_CONFIG0_UPPER_WSREQ_SHIFT 12 #define DM_CONFIG0_LOWER_DCDIS_SET (1<<8) #define DM_CONFIG0_LOWER_WBINVD_SET (1<<5) #define DM_CONFIG0_LOWER_MISSER_SET (1<<1) + /* configuration MSRs */ #define CPU_RCONF_DEFAULT 0x1808 #define RCONF_DEFAULT_UPPER_ROMRC_SHIFT 24 @@ -276,7 +264,7 @@ #define CPU_L2TB_ENTRY 0x189E #define CPU_L2TB_ENTRY_I 0x189F #define CPU_DM_BIST 0x18C0 - /* SMM*/ + /* SMM */ #define CPU_AC_SMM_CTL 0x1301 #define SMM_NMI_EN_SET (1<<0) #define SMM_SUSP_EN_SET (1<<1) @@ -294,10 +282,7 @@ #define TSC_SUSP_SET (1<<5) #define SUSP_EN_SET (1<<12) - /**/ - /* VG GLIU0 port4*/ - /**/ - +/* VG GLIU0 port4 */ #define VG_GLD_MSR_CAP (MSR_VG + 0x2000) #define VG_GLD_MSR_CONFIG (MSR_VG + 0x2001) #define VG_GLD_MSR_PM (MSR_VG + 0x2004) @@ -306,29 +291,20 @@ #define GP_GLD_MSR_CONFIG (MSR_GP + 0x2001) #define GP_GLD_MSR_PM (MSR_GP + 0x2004) - - -/**/ -/* DF GLIU0 port6*/ -/**/ - +/* DF GLIU0 port6 */ #define DF_GLD_MSR_CAP (MSR_DF + 0x2000) #define DF_GLD_MSR_MASTER_CONF (MSR_DF + 0x2001) #define DF_LOWER_LCD_SHIFT 6 #define DF_GLD_MSR_PM (MSR_DF + 0x2004) - - -/**/ -/* GeodeLink Control Processor GLIU1 port3*/ -/**/ +/* GeodeLink Control Processor GLIU1 port3 */ #define GLCP_GLD_MSR_CAP (MSR_GLCP + 0x2000) #define GLCP_GLD_MSR_CONF (MSR_GLCP + 0x2001) #define GLCP_GLD_MSR_PM (MSR_GLCP + 0x2004) #define GLCP_DELAY_CONTROLS (MSR_GLCP + 0x0F) -#define GLCP_SYS_RSTPLL (MSR_GLCP +0x14 /* R/W*/) +#define GLCP_SYS_RSTPLL (MSR_GLCP +0x14 /* R/W */) #define RSTPLL_UPPER_MDIV_SHIFT 9 #define RSTPLL_UPPER_VDIV_SHIFT 6 #define RSTPLL_UPPER_FBDIV_SHIFT 0 @@ -352,13 +328,10 @@ #define RSTPPL_LOWER_PCI_SEMI_SYNC_SET (1<<8) #define RSTPPL_LOWER_CHIP_RESET_SET (1<<0) -#define GLCP_DOTPLL (MSR_GLCP + 0x15 /* R/W*/) +#define GLCP_DOTPLL (MSR_GLCP + 0x15 /* R/W */) #define DOTPPL_LOWER_PD_SET (1<<14) - -/**/ -/* GLIU1 port 4*/ -/**/ +/* GLIU1 port 4 */ #define GLPCI_GLD_MSR_CAP (MSR_PCI + 0x2000) #define GLPCI_GLD_MSR_CONFIG (MSR_PCI + 0x2001) #define GLPCI_GLD_MSR_PM (MSR_PCI + 0x2004) @@ -423,64 +396,60 @@ #define GLPCI_SPARE_LOWER_NSE_SET (1<<1) #define GLPCI_SPARE_LOWER_SUPO_SET (1<<0) - -/**/ -/* FooGlue GLIU1 port 5*/ -/**/ +/* FooGlue GLIU1 port 5 */ #define FG_GLD_MSR_CAP (MSR_FG + 0x2000) #define FG_GLD_MSR_PM (MSR_FG + 0x2004) -/* VIP GLIU1 port 5*/ -/* */ +/* VIP GLIU1 port 5 */ #define VIP_GLD_MSR_CAP (MSR_VIP + 0x2000) #define VIP_GLD_MSR_CONFIG (MSR_VIP + 0x2001) #define VIP_GLD_MSR_PM (MSR_VIP + 0x2004) #define VIP_BIST (MSR_VIP + 0x2005) #define VIP_GIO_MSR_SEL (MSR_VIP + 0x2010) -/* */ -/* AES GLIU1 port 6*/ -/* */ + +/* AES GLIU1 port 6 */ #define AES_GLD_MSR_CAP (MSR_AES + 0x2000) #define AES_GLD_MSR_CONFIG (MSR_AES + 0x2001) #define AES_GLD_MSR_PM (MSR_AES + 0x2004) #define AES_CONTROL (MSR_AES + 0x2006) + /* more fun stuff */ -#define BM 1 /* Base Mask - map power of 2 size aligned region*/ -#define BMO 2 /* BM with an offset*/ -#define R 3 /* Range - 4k range minimum*/ -#define RO 4 /* R with offset*/ -#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R*/ -#define BMIO 6 /* Base Mask IO*/ -#define SCIO 7 /* Swiss 0xCeese IO*/ -#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU*/ -#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU*/ -#define BMO_SMM 10 /* Specail marker for SMM*/ -#define BM_SMM 11 /* Specail marker for SMM*/ -#define BMO_DMM 12 /* Specail marker for DMM*/ -#define BM_DMM 13 /* Specail marker for DMM*/ -#define RO_FB 14 /* special for Frame buffer.*/ -#define R_FB 15 /* special for FB.*/ -#define OTHER 0x0FE /* Special marker for other*/ -#define GL_END 0x0FF /* end*/ +#define BM 1 /* Base Mask - map power of 2 size aligned region */ +#define BMO 2 /* BM with an offset */ +#define R 3 /* Range - 4k range minimum */ +#define RO 4 /* R with offset */ +#define SC 5 /* Swiss 0xCeese - maps a 256K region in to 16K 0xcunks. Set W/R */ +#define BMIO 6 /* Base Mask IO */ +#define SCIO 7 /* Swiss 0xCeese IO */ +#define SC_SHADOW 8 /* Special marker for Shadow SC descriptors so setShadow proc is independant of CPU */ +#define R_SYSMEM 9 /* Special marker for SYSMEM R descriptors so GLIUInit proc is independant of CPU */ +#define BMO_SMM 10 /* Specail marker for SMM */ +#define BM_SMM 11 /* Specail marker for SMM */ +#define BMO_DMM 12 /* Specail marker for DMM */ +#define BM_DMM 13 /* Specail marker for DMM */ +#define RO_FB 14 /* special for Frame buffer. */ +#define R_FB 15 /* special for FB. */ +#define OTHER 0x0FE /* Special marker for other */ +#define GL_END 0x0FF /* end */ #define MSR_GL0 (GL1_GLIU0 << 29) -/* Set up desc addresses from 20 - 3f*/ -/* This is chip specific!*/ -#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM*/ -#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM*/ -#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC*/ -#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R*/ -#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO*/ -#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO*/ - -#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM*/ -#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM*/ -#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC*/ -#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R*/ -#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM*/ -#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM*/ -#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU*/ +/* Set up desc addresses from 20 - 3f */ +/* This is chip specific! */ +#define MSR_GLIU0_BASE1 (MSR_GLIU0 + 0x20) /* BM */ +#define MSR_GLIU0_BASE2 (MSR_GLIU0 + 0x21) /* BM */ +#define MSR_GLIU0_SHADOW (MSR_GLIU0 + 0x2C) /* SCO should only be SC */ +#define MSR_GLIU0_SYSMEM (MSR_GLIU0 + 0x28) /* RO should only be R */ +#define MSR_GLIU0_SMM (MSR_GLIU0 + 0x26) /* BMO */ +#define MSR_GLIU0_DMM (MSR_GLIU0 + 0x27) /* BMO */ + +#define MSR_GLIU1_BASE1 (MSR_GLIU1 + 0x20) /* BM */ +#define MSR_GLIU1_BASE2 (MSR_GLIU1 + 0x21) /* BM */ +#define MSR_GLIU1_SHADOW (MSR_GLIU1 + 0x2D) /* SCO should only be SC */ +#define MSR_GLIU1_SYSMEM (MSR_GLIU1 + 0x29) /* RO should only be R */ +#define MSR_GLIU1_SMM (MSR_GLIU1 + 0x23) /* BM */ +#define MSR_GLIU1_DMM (MSR_GLIU1 + 0x24) /* BM */ +#define MSR_GLIU1_FPU_TRAP (MSR_GLIU1 + 0x0E3) /* FooGlue F0 for FPU */ /* definitions that are "once you are mostly up, start VSA" type things */ #define SMM_OFFSET 0x40400000 @@ -503,9 +472,7 @@ #define CHIPSET_DEV_NUM 15 #define IDSEL_BASE 11 // bit 11 = device 1 -/* */ -/* SB LBAR IO + MEMORY MAP*/ -/* */ +/* SB LBAR IO + MEMORY MAP */ #define SMBUS_BASE ( 0x6000) #define GPIO_BASE ( 0x6100) #define MFGPT_BASE ( 0x6200) -- cgit v1.2.3