From e7b96c32c1882d4d0d1b3aa5af98edab9a92363b Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Wed, 26 Jan 2022 14:33:47 +0100 Subject: drivers/usb/gadget.c: Use 'printk()' instead of 'dprintk()' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit dprintk(BIOS_,...) was probably useed for debug print, so use printk(BIOS_, ...) instead. Change-Id: Ia4171c8b4b42f6b0c1c9c0438bab2eef73f8c416 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/c/coreboot/+/61405 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki --- src/drivers/usb/gadget.c | 38 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 20 deletions(-) (limited to 'src/drivers') diff --git a/src/drivers/usb/gadget.c b/src/drivers/usb/gadget.c index c6a89bf5c0..fcb361cc83 100644 --- a/src/drivers/usb/gadget.c +++ b/src/drivers/usb/gadget.c @@ -8,8 +8,6 @@ #include "usb_ch9.h" #include "ehci.h" -#define dprintk printk - #define USB_HUB_PORT_CONNECTION 0 #define USB_HUB_PORT_ENABLED 1 #define USB_HUB_PORT_RESET 4 @@ -144,13 +142,13 @@ debug_dev_retry: if (dbgp_desc.bLength == sizeof(dbgp_desc) && dbgp_desc.bDescriptorType == USB_DT_DEBUG) goto debug_dev_found; else - dprintk(BIOS_INFO, "Invalid debug device descriptor.\n"); + printk(BIOS_INFO, "Invalid debug device descriptor.\n"); } if (devnum == 0) { devnum = USB_DEBUG_DEVNUM; goto debug_dev_retry; } else { - dprintk(BIOS_INFO, "Could not find attached debug device.\n"); + printk(BIOS_INFO, "Could not find attached debug device.\n"); return -1; } debug_dev_found: @@ -161,12 +159,12 @@ debug_dev_found: USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "Could not move attached device to %d.\n", + printk(BIOS_INFO, "Could not move attached device to %d.\n", USB_DEBUG_DEVNUM); return -2; } devnum = USB_DEBUG_DEVNUM; - dprintk(BIOS_INFO, "EHCI debug device renamed to 127.\n"); + printk(BIOS_INFO, "EHCI debug device renamed to 127.\n"); } /* Enable the debug interface */ @@ -174,10 +172,10 @@ debug_dev_found: USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, USB_REQ_SET_FEATURE, USB_DEVICE_DEBUG_MODE, 0, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "Could not enable EHCI debug device.\n"); + printk(BIOS_INFO, "Could not enable EHCI debug device.\n"); return -3; } - dprintk(BIOS_INFO, "EHCI debug interface enabled.\n"); + printk(BIOS_INFO, "EHCI debug interface enabled.\n"); pipe[DBGP_CONSOLE_EPOUT].endpoint = dbgp_desc.bDebugOutEndpoint; pipe[DBGP_CONSOLE_EPIN].endpoint = dbgp_desc.bDebugInEndpoint; @@ -189,7 +187,7 @@ debug_dev_found: small_write: ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n",5); if (ret < 0) { - dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); + printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); if (!configured) { /* Send Set Configure request to device. This is required for FX2 (CY7C68013) to transfer from USB state Addressed to Configured, @@ -203,7 +201,7 @@ small_write: } return -4; } - dprintk(BIOS_INFO, "Test write done\n"); + printk(BIOS_INFO, "Test write done\n"); return 0; } @@ -251,19 +249,19 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, USB_REQ_SET_ADDRESS, USB_DEBUG_DEVNUM, 0, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "Could not move attached device to %d.\n", + printk(BIOS_INFO, "Could not move attached device to %d.\n", USB_DEBUG_DEVNUM); return -2; } devnum = USB_DEBUG_DEVNUM; - dprintk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum); + printk(BIOS_INFO, "EHCI debug device renamed to %d.\n", devnum); /* Send Set Configure request to device. */ ret = dbgp_control_msg(ehci_debug, devnum, USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, USB_REQ_SET_CONFIGURATION, 1, 0, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "FTDI set configuration failed.\n"); + printk(BIOS_INFO, "FTDI set configuration failed.\n"); return -2; } @@ -271,7 +269,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, FTDI_SIO_SET_BITMODE_REQUEST, 0, uart_if, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "FTDI SET_BITMODE failed.\n"); + printk(BIOS_INFO, "FTDI SET_BITMODE failed.\n"); return -3; } ft232h_baud(&baud_value, &baud_index, @@ -281,7 +279,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi FTDI_SIO_SET_BAUDRATE_REQUEST, baud_value, baud_index | uart_if, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n"); + printk(BIOS_INFO, "FTDI SET_BAUDRATE failed.\n"); return -3; } ret = dbgp_control_msg(ehci_debug, devnum, @@ -289,7 +287,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi FTDI_SIO_SET_DATA_REQUEST, 0x0008, uart_if, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "FTDI SET_DATA failed.\n"); + printk(BIOS_INFO, "FTDI SET_DATA failed.\n"); return -3; } ret = dbgp_control_msg(ehci_debug, devnum, @@ -297,7 +295,7 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi FTDI_SIO_SET_FLOW_CTRL_REQUEST, 0x0000, uart_if, NULL, 0); if (ret < 0) { - dprintk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n"); + printk(BIOS_INFO, "FTDI SET_FLOW_CTRL failed.\n"); return -3; } @@ -309,10 +307,10 @@ static int probe_for_ftdi(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pi /* Perform a small write. */ ret = dbgp_bulk_write_x(&pipe[DBGP_CONSOLE_EPOUT], "USB\r\n", 5); if (ret < 0) { - dprintk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); + printk(BIOS_INFO, "dbgp_bulk_write failed: %d\n", ret); return -4; } - dprintk(BIOS_INFO, "Test write done\n"); + printk(BIOS_INFO, "Test write done\n"); return 0; } @@ -335,7 +333,7 @@ int dbgp_probe_gadget(struct ehci_dbg_port *ehci_debug, struct dbgp_pipe *pipe) ret = probe_for_debug_descriptor(ehci_debug, pipe); } if (ret < 0) { - dprintk(BIOS_INFO, "Could not enable debug dongle.\n"); + printk(BIOS_INFO, "Could not enable debug dongle.\n"); return ret; } -- cgit v1.2.3