From 4c686f2106a33e7a452bec163c178724a0313616 Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Fri, 14 Feb 2014 12:45:09 +0200 Subject: OxPCIe uart: Split PCI bridge control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit None of the PCI bridge management here is specific to the PCI UART device/function. Also the Kconfig variable defaults are not globally valid, fill samsung/lumpy with working values. Change-Id: Id22631412379af1d6bf62c996357d36d7ec47ca3 Signed-off-by: Kyösti Mälkki Reviewed-on: http://review.coreboot.org/5237 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc --- src/drivers/oxford/oxpcie/Kconfig | 64 ++--------------------- src/drivers/oxford/oxpcie/oxpcie_early.c | 89 +++++++------------------------- 2 files changed, 21 insertions(+), 132 deletions(-) (limited to 'src/drivers') diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig index 5ad42aafb7..c2ea7b6ad8 100644 --- a/src/drivers/oxford/oxpcie/Kconfig +++ b/src/drivers/oxford/oxpcie/Kconfig @@ -1,68 +1,10 @@ config DRIVERS_OXFORD_OXPCIE bool "Oxford OXPCIe952" default n + depends on PCI select DRIVERS_UART_8250MEM + select EARLY_PCI_BRIDGE help Support for Oxford OXPCIe952 serial port PCIe cards. Currently only devices with the vendor ID 0x1415 and device ID - 0xc158 will work. - NOTE: Right now you have to set the base address of your OXPCIe952 - card to exactly the value that the device allocator would set them - later on, or serial console functionality will stop as soon as the - resource allocator assigns a new base address to the device. - -config OXFORD_OXPCIE_BRIDGE_BUS - hex "OXPCIe's PCIe bridge bus number" - default 0x0 - depends on DRIVERS_OXFORD_OXPCIE - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. In order to use an - OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge - that controls the OXPCIe952 controller first. - -config OXFORD_OXPCIE_BRIDGE_DEVICE - hex "OXPCIe's PCIe bridge device number" - default 0x1c - depends on DRIVERS_OXFORD_OXPCIE - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. In order to use an - OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge - that controls the OXPCIe952 controller first. - -config OXFORD_OXPCIE_BRIDGE_FUNCTION - hex "OXPCIe's PCIe bridge function number" - default 0x2 - depends on DRIVERS_OXFORD_OXPCIE - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. In order to use an - OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge - that controls the OXPCIe952 controller first. - -config OXFORD_OXPCIE_BRIDGE_SUBORDINATE - hex "OXPCIe's PCIe bridge subordinate bus" - default 0x3 - depends on DRIVERS_OXFORD_OXPCIE - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. In order to use an - OXPCIe952 based PCIe card, coreboot has to set up the PCIe bridge - that controls the OXPCIe952 controller first. - -config OXFORD_OXPCIE_BASE_ADDRESS - hex "Base address for rom stage console" - default 0xe0400000 - depends on DRIVERS_OXFORD_OXPCIE - help - While coreboot is executing code from ROM, the coreboot resource - allocator has not been running yet. Hence PCI devices living behind - a bridge are not yet visible to the system. In order to use an - OXPCIe952 based PCIe card, coreboot has to set up a temporary address - for the OXPCIe952 controller. - + 0xc158 or 0xc11b will work. diff --git a/src/drivers/oxford/oxpcie/oxpcie_early.c b/src/drivers/oxford/oxpcie/oxpcie_early.c index 7de9da6b46..b81fa8914d 100644 --- a/src/drivers/oxford/oxpcie/oxpcie_early.c +++ b/src/drivers/oxford/oxpcie/oxpcie_early.c @@ -23,101 +23,53 @@ #include #include #include -#include #include #include #include #include static unsigned int oxpcie_present CAR_GLOBAL; -static ROMSTAGE_CONST u32 uart0_base = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x1000; -static ROMSTAGE_CONST u32 uart1_base = CONFIG_OXFORD_OXPCIE_BASE_ADDRESS + 0x2000; +static ROMSTAGE_CONST u32 uart0_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x1000; +static ROMSTAGE_CONST u32 uart1_base = CONFIG_EARLY_PCI_MMIO_BASE + 0x2000; -#define PCIE_BRIDGE \ - PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_BUS, \ - CONFIG_OXFORD_OXPCIE_BRIDGE_DEVICE, \ - CONFIG_OXFORD_OXPCIE_BRIDGE_FUNCTION) - -#define OXPCIE_DEVICE \ - PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 0) - -#define OXPCIE_DEVICE_3 \ - PCI_DEV(CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE, 0, 3) - -static void oxpcie_init_bridge(void) +int pci_early_device_probe(u8 bus, u8 dev, u32 mmio_base) { - u16 reg16; - - /* First we reset the secondary bus */ - reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL); - reg16 |= (1 << 6); /* SRESET */ - pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16); - - /* Assume we don't have to wait here forever */ + pci_devfn_t device = PCI_DEV(bus, dev, 0); - /* Read back and clear reset bit. */ - reg16 = pci_read_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL); - reg16 &= ~(1 << 6); /* SRESET */ - pci_write_config16(PCIE_BRIDGE, PCI_BRIDGE_CONTROL, reg16); - - /* Set up subordinate bus number */ - pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS, 0x00); - pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS, 0x00); - pci_write_config8(PCIE_BRIDGE, PCI_SECONDARY_BUS, - CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE); - pci_write_config8(PCIE_BRIDGE, PCI_SUBORDINATE_BUS, - CONFIG_OXFORD_OXPCIE_BRIDGE_SUBORDINATE); - - /* Memory window for the OXPCIe952 card */ - // XXX is the calculation of base and limit correct? - pci_write_config32(PCIE_BRIDGE, PCI_MEMORY_BASE, - ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS & 0xffff0000) | - ((CONFIG_OXFORD_OXPCIE_BASE_ADDRESS >> 16) & 0xff00))); - - /* Enable memory access through bridge */ - reg16 = pci_read_config16(PCIE_BRIDGE, PCI_COMMAND); - reg16 |= PCI_COMMAND_MEMORY; - pci_write_config16(PCIE_BRIDGE, PCI_COMMAND, reg16); - - u32 timeout = 20000; // Timeout in 10s of microseconds. - u32 id = 0; - for (;;) { - id = pci_read_config32(OXPCIE_DEVICE, PCI_VENDOR_ID); - if (!timeout-- || (id != 0 && id != 0xffffffff)) - break; - udelay(10); - } - - u32 device = OXPCIE_DEVICE; /* unknown default */ + u32 id = pci_read_config32(device, PCI_VENDOR_ID); switch (id) { - case 0xc1181415: /* e.g. Startech PEX1S1PMINI */ + case 0xc1181415: /* e.g. Startech PEX1S1PMINI function 0 */ /* On this device function 0 is the parallel port, and * function 3 is the serial port. So let's go look for * the UART. */ - id = pci_read_config32(OXPCIE_DEVICE_3, PCI_VENDOR_ID); + device = PCI_DEV(bus, dev, 3); + id = pci_read_config32(device, PCI_VENDOR_ID); if (id != 0xc11b1415) - return; - device = OXPCIE_DEVICE_3; + return -1; break; + case 0xc11b1415: /* e.g. Startech PEX1S1PMINI function 3 */ case 0xc1581415: /* e.g. Startech MPEX2S952 */ - device = OXPCIE_DEVICE; break; default: /* No UART here. */ - return; + return -1; } + /* Sanity-check, we assume fixed location. */ + if (mmio_base != CONFIG_EARLY_PCI_MMIO_BASE) + return -1; + /* Setup base address on device */ - pci_write_config32(device, PCI_BASE_ADDRESS_0, - CONFIG_OXFORD_OXPCIE_BASE_ADDRESS); + pci_write_config32(device, PCI_BASE_ADDRESS_0, mmio_base); /* Enable memory on device */ - reg16 = pci_read_config16(device, PCI_COMMAND); + u16 reg16 = pci_read_config16(device, PCI_COMMAND); reg16 |= PCI_COMMAND_MEMORY; pci_write_config16(device, PCI_COMMAND, reg16); car_set_var(oxpcie_present, 1); + return 0; } static int oxpcie_uart_active(void) @@ -157,8 +109,3 @@ unsigned int uart_platform_refclk(void) { return 62500000; } - -void oxford_init(void) -{ - oxpcie_init_bridge(); -} -- cgit v1.2.3