From e1eca1d91cf05b8769e830b5ab59060a0ad5ff0c Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Sat, 1 Dec 2018 17:14:35 -0800 Subject: acpi_pld: Make it easier to define the ACPI USB device groups The Linux kernel can use the ACPI _PLD group information to determine peer ports. Currently to define the group information the devicetree must provide a complete _PLD structure. This change pulls the group information into a separate structure that can be defined in devicetree. This makes it easier to set for USB devices in devicetree that do not need a full custom PLD. This was tested on a sarien board with the USB devices defined by verifying that the USB 2/3 ports are correctly identified with their peer in sysfs. Change-Id: Ifd4cadf0f6c901eb3832ad4e1395904f99c2f5a0 Signed-off-by: Duncan Laurie Reviewed-on: https://review.coreboot.org/c/29998 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- src/drivers/usb/acpi/chip.h | 8 +++++++- src/drivers/usb/acpi/usb_acpi.c | 2 +- 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'src/drivers/usb') diff --git a/src/drivers/usb/acpi/chip.h b/src/drivers/usb/acpi/chip.h index 6429f13630..512893d207 100644 --- a/src/drivers/usb/acpi/chip.h +++ b/src/drivers/usb/acpi/chip.h @@ -46,7 +46,13 @@ struct drivers_usb_acpi_config { */ enum acpi_upc_type type; - /* Define a custom physical location for the port */ + /* Group peer ports */ + struct acpi_pld_group group; + + /* + * Define a custom physical location for the port. + * If enabled, this takes precedence over the 'group' field. + */ bool use_custom_pld; struct acpi_pld custom_pld; diff --git a/src/drivers/usb/acpi/usb_acpi.c b/src/drivers/usb/acpi/usb_acpi.c index f049e68c22..abc1718eb9 100644 --- a/src/drivers/usb/acpi/usb_acpi.c +++ b/src/drivers/usb/acpi/usb_acpi.c @@ -57,7 +57,7 @@ static void usb_acpi_fill_ssdt_generator(struct device *dev) } else { /* Fill PLD strucutre based on port type */ struct acpi_pld pld; - acpi_pld_fill_usb(&pld, config->type); + acpi_pld_fill_usb(&pld, config->type, &config->group); acpigen_write_pld(&pld); } -- cgit v1.2.3