From 5bd6096f82b396e93cb8b52a8d9e98d3bbf749aa Mon Sep 17 00:00:00 2001 From: Felix Held <felix-coreboot@felixheld.de> Date: Fri, 4 Feb 2022 23:03:06 +0100 Subject: drivers/uart/uart8250reg.h: remove duplicate bit definitions UART8250_FCR_RXSR is a redefinition of UART8250_FCR_CLEAR_RCVR, UART8250_FCR_TXSR a redefinition of UART8250_FCR_CLEAR_XMIT and UART8250_LCR_BKSE a redefinition of UART8250_LCR_DLAB. None of those redefinitions are used, so just drop them. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b9edae67180b04ff1c887c5742c07c774fc9c59 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> --- src/drivers/uart/uart8250reg.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'src/drivers/uart') diff --git a/src/drivers/uart/uart8250reg.h b/src/drivers/uart/uart8250reg.h index 28dc21caa4..573eb6ffc4 100644 --- a/src/drivers/uart/uart8250reg.h +++ b/src/drivers/uart/uart8250reg.h @@ -34,9 +34,6 @@ #define UART8250_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ #define UART8250_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ -#define UART8250_FCR_RXSR 0x02 /* Receiver soft reset */ -#define UART8250_FCR_TXSR 0x04 /* Transmitter soft reset */ - #define UART8250_LCR 0x03 #define UART8250_LCR_WLS_MSK 0x03 /* character length select mask */ #define UART8250_LCR_WLS_5 0x00 /* 5 bit character length */ @@ -48,7 +45,6 @@ #define UART8250_LCR_EPS 0x10 /* Even Parity Select */ #define UART8250_LCR_STKP 0x20 /* Stick Parity */ #define UART8250_LCR_SBRK 0x40 /* Set Break */ -#define UART8250_LCR_BKSE 0x80 /* Bank select enable */ #define UART8250_LCR_DLAB 0x80 /* Divisor latch access bit */ #define UART8250_MCR 0x04 -- cgit v1.2.3