From c2973d196d1224a1253478dc29d5f8fa004eaab8 Mon Sep 17 00:00:00 2001 From: Furquan Shaikh Date: Tue, 29 Nov 2016 22:07:42 -0800 Subject: spi: Get rid of SPI_ATOMIC_SEQUENCING SPI_ATOMIC_SEQUENCING was added to accomodate spi flash controllers with the ability to perform tx and rx of flash command and response at the same time. Instead of introducing this notion at SPI flash driver layer, clean up the interface to SPI used by flash. Flash uses a command-response kind of communication. Thus, even though SPI is duplex, flash command needs to be sent out on SPI bus and then flash response should be received on the bus. Some specialized x86 flash controllers are capable of handling command and response in a single transaction. In order to support all the varied cases: 1. Add spi_xfer_vector that takes as input a vector of SPI operations and calls back into SPI controller driver to process these operations. 2. In order to accomodate flash command-response model, use two vectors while calling into spi_xfer_vector -- one with dout set to non-NULL(command) and other with din set to non-NULL(response). 3. For specialized SPI flash controllers combine two successive vectors if the transactions look like a command-response pair. 4. Provide helper functions for common cases like supporting only 2 vectors at a time, supporting n vectors at a time, default vector operation to cycle through all SPI op vectors one by one. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I4c9e78c585ad95c40c0d5af078ff8251da286236 Signed-off-by: Furquan Shaikh Reviewed-on: https://review.coreboot.org/17681 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/drivers/spi/Kconfig | 10 ----- src/drivers/spi/spi-generic.c | 99 +++++++++++++++++++++++++++++++++++++++++++ src/drivers/spi/spi_flash.c | 47 +++++++------------- 3 files changed, 114 insertions(+), 42 deletions(-) (limited to 'src/drivers/spi') diff --git a/src/drivers/spi/Kconfig b/src/drivers/spi/Kconfig index b55de58962..c8d86ff104 100644 --- a/src/drivers/spi/Kconfig +++ b/src/drivers/spi/Kconfig @@ -61,16 +61,6 @@ config SPI_FLASH_INCLUDE_ALL_DRIVERS default n if COMMON_CBFS_SPI_WRAPPER default y -config SPI_ATOMIC_SEQUENCING - bool - default y if ARCH_X86 - default n if !ARCH_X86 - help - Select this option if the SPI controller uses "atomic sequencing." - Atomic sequencing is when the sequence of commands is pre-programmed - in the SPI controller. Hardware manages the transaction instead of - software. This is common on x86 platforms. - config SPI_FLASH_SMM bool "SPI flash driver support in SMM" default n diff --git a/src/drivers/spi/spi-generic.c b/src/drivers/spi/spi-generic.c index 4fcd04c13a..805e17af5a 100644 --- a/src/drivers/spi/spi-generic.c +++ b/src/drivers/spi/spi-generic.c @@ -14,6 +14,7 @@ * GNU General Public License for more details. */ +#include #include #include @@ -32,10 +33,55 @@ void spi_release_bus(const struct spi_slave *slave) ctrlr->release_bus(slave); } +static int spi_xfer_single_op(const struct spi_slave *slave, + struct spi_op *op) +{ + const struct spi_ctrlr *ctrlr = slave->ctrlr; + int ret; + + if (!ctrlr || !ctrlr->xfer) + return -1; + + ret = ctrlr->xfer(slave, op->dout, op->bytesout, op->din, op->bytesin); + if (ret) + op->status = SPI_OP_FAILURE; + else + op->status = SPI_OP_SUCCESS; + + return ret; +} + +static int spi_xfer_vector_default(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + size_t i; + int ret; + + for (i = 0; i < count; i++) { + ret = spi_xfer_single_op(slave, &vectors[i]); + if (ret) + return ret; + } + + return 0; +} + +int spi_xfer_vector(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + const struct spi_ctrlr *ctrlr = slave->ctrlr; + + if (ctrlr && ctrlr->xfer_vector) + return ctrlr->xfer_vector(slave, vectors, count); + + return spi_xfer_vector_default(slave, vectors, count); +} + int spi_xfer(const struct spi_slave *slave, const void *dout, size_t bytesout, void *din, size_t bytesin) { const struct spi_ctrlr *ctrlr = slave->ctrlr; + if (ctrlr && ctrlr->xfer) return ctrlr->xfer(slave, dout, bytesout, din, bytesin); @@ -76,3 +122,56 @@ int __attribute__((weak)) spi_setup_slave(unsigned int bus, unsigned int cs, return 0; } + +static int spi_xfer_combine_two_vectors(const struct spi_slave *slave, + struct spi_op *v1, struct spi_op *v2) +{ + struct spi_op op = { + .dout = v1->dout, .bytesout = v1->bytesout, + .din = v2->din, .bytesin = v2->bytesin, + }; + int ret; + + /* + * Combine two vectors only if: + * v1 has non-NULL dout and NULL din and + * v2 has non-NULL din and NULL dout and + * + * In all other cases, do not combine the two vectors. + */ + if ((!v1->dout || v1->din) || (v2->dout || !v2->din)) + return -1; + + ret = spi_xfer_single_op(slave, &op); + v1->status = v2->status = op.status; + + return ret; +} + +/* + * Helper function to allow chipsets to combine two vectors if possible. This + * function can only handle upto 2 vectors. + * + * Two vectors are combined if first vector has a non-NULL dout and NULL din and + * second vector has a non-NULL din and NULL dout. Otherwise, each vector is + * operated upon one at a time. + * + * Returns 0 on success and non-zero on failure. + */ +int spi_xfer_two_vectors(const struct spi_slave *slave, + struct spi_op vectors[], size_t count) +{ + int ret; + + assert (count <= 2); + + if (count == 2) { + ret = spi_xfer_combine_two_vectors(slave, &vectors[0], + &vectors[1]); + + if (!ret || (vectors[0].status != SPI_OP_NOT_EXECUTED)) + return ret; + } + + return spi_xfer_vector_default(slave, vectors, count); +} diff --git a/src/drivers/spi/spi_flash.c b/src/drivers/spi/spi_flash.c index 3b4272b709..a0e310554a 100644 --- a/src/drivers/spi/spi_flash.c +++ b/src/drivers/spi/spi_flash.c @@ -32,47 +32,30 @@ static void spi_flash_addr(u32 addr, u8 *cmd) cmd[3] = addr >> 0; } -/* - * If atomic sequencing is used, the cycle type is known to the SPI - * controller so that it can perform consecutive transfers and arbitrate - * automatically. Otherwise the SPI controller transfers whatever the - * user requests immediately, without regard to sequence. Atomic - * sequencing is commonly used on x86 platforms. - * - * SPI flash commands are simple two-step sequences. The command byte is - * always written first and may be followed by an address. Then data is - * either read or written. For atomic sequencing we'll pass everything into - * spi_xfer() at once and let the controller handle the details. Otherwise - * we will write all output bytes first and then read if necessary. - * - * FIXME: This really should be abstracted better, but that will - * require overhauling the entire SPI infrastructure. - */ static int do_spi_flash_cmd(const struct spi_slave *spi, const void *dout, size_t bytes_out, void *din, size_t bytes_in) { int ret = 1; + /* + * SPI flash requires command-response kind of behavior. Thus, two + * separate SPI vectors are required -- first to transmit dout and other + * to receive in din. If some specialized SPI flash controllers + * (e.g. x86) can perform both command and response together, it should + * be handled at SPI flash controller driver level. + */ + struct spi_op vectors[] = { + [0] = { .dout = dout, .bytesout = bytes_out, + .din = NULL, .bytesin = 0, }, + [1] = { .dout = NULL, .bytesout = 0, + .din = din, .bytesin = bytes_in }, + }; if (spi_claim_bus(spi)) return ret; -#if CONFIG_SPI_ATOMIC_SEQUENCING == 1 - if (spi_xfer(spi, dout, bytes_out, din, bytes_in) < 0) - goto done; -#else - if (dout && bytes_out) { - if (spi_xfer(spi, dout, bytes_out, NULL, 0) < 0) - goto done; - } - - if (din && bytes_in) { - if (spi_xfer(spi, NULL, 0, din, bytes_in) < 0) - goto done; - } -#endif + if (spi_xfer_vector(spi, vectors, ARRAY_SIZE(vectors)) == 0) + ret = 0; - ret = 0; -done: spi_release_bus(spi); return ret; } -- cgit v1.2.3