From d701ef7475fe6d015a61cd91410391c3e0902f53 Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Fri, 27 Dec 2019 15:16:17 -0700 Subject: drives/spi_flash: add spi_flash_cmd_write_page_program() The SPI flashes that support page programming mode had duplicated the logic for writing in every driver. Add spi_flash_cmd_write_page_program() and use the common implementation to reduce code size that comes from duplication. The savings is ~2.5KiB per stage where the spi flash drivers are utilized. Change-Id: Ie6db03fa8ad33789f1d07a718a769e4ca8bffe1d Signed-off-by: Aaron Durbin Reviewed-on: https://review.coreboot.org/c/coreboot/+/37963 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Marshall Dawson --- src/drivers/spi/eon.c | 64 +++------------------------------------------------ 1 file changed, 3 insertions(+), 61 deletions(-) (limited to 'src/drivers/spi/eon.c') diff --git a/src/drivers/spi/eon.c b/src/drivers/spi/eon.c index 2cdbdbbe8d..1f3cbf3c78 100644 --- a/src/drivers/spi/eon.c +++ b/src/drivers/spi/eon.c @@ -235,68 +235,8 @@ static const struct eon_spi_flash_params eon_spi_flash_table[] = { }, }; -static int eon_write(const struct spi_flash *flash, - u32 offset, size_t len, const void *buf) -{ - unsigned long byte_addr; - unsigned long page_size; - size_t chunk_len; - size_t actual; - int ret = 0; - u8 cmd[4]; - - page_size = flash->page_size; - - for (actual = 0; actual < len; actual += chunk_len) { - byte_addr = offset % page_size; - chunk_len = MIN(len - actual, page_size - byte_addr); - chunk_len = spi_crop_chunk(&flash->spi, sizeof(cmd), chunk_len); - - ret = spi_flash_cmd(&flash->spi, CMD_EN25_WREN, NULL, 0); - if (ret < 0) { - printk(BIOS_WARNING, "SF: Enabling Write failed\n"); - goto out; - } - - cmd[0] = CMD_EN25_PP; - cmd[1] = (offset >> 16) & 0xff; - cmd[2] = (offset >> 8) & 0xff; - cmd[3] = offset & 0xff; - -#if CONFIG(DEBUG_SPI_FLASH) - printk(BIOS_SPEW, - "PP: %p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", - buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); -#endif - - ret = spi_flash_cmd_write(&flash->spi, cmd, sizeof(cmd), - buf + actual, chunk_len); - if (ret < 0) { - printk(BIOS_WARNING, "SF: EON Page Program failed\n"); - goto out; - } - - ret = spi_flash_cmd_wait_ready(flash, - SPI_FLASH_PROG_TIMEOUT_MS); - if (ret) { - printk(BIOS_WARNING, "SF: EON Page Program timeout\n"); - goto out; - } - - offset += chunk_len; - } - -#if CONFIG(DEBUG_SPI_FLASH) - printk(BIOS_SPEW, "SF: EON: Successfully programmed %zu bytes @ %#x\n", - len, (unsigned int)(offset - len)); -#endif - -out: - return ret; -} - static const struct spi_flash_ops spi_flash_ops = { - .write = eon_write, + .write = spi_flash_cmd_write_page_program, .erase = spi_flash_cmd_erase, .status = spi_flash_cmd_status, }; @@ -327,6 +267,8 @@ int spi_flash_probe_eon(const struct spi_slave *spi, u8 *idcode, flash->size = flash->sector_size * params->nr_sectors; flash->erase_cmd = CMD_EN25_SE; flash->status_cmd = CMD_EN25_RDSR; + flash->pp_cmd = CMD_EN25_PP; + flash->wren_cmd = CMD_EN25_WREN; flash->ops = &spi_flash_ops; -- cgit v1.2.3