From ae5e11d7cd7484343d277fb454fb19fdff34730d Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Fri, 27 Apr 2012 02:31:28 +0200 Subject: Move top level pc80 directory to drivers/ There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- src/drivers/pc80/mc146818rtc.c | 340 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 340 insertions(+) create mode 100644 src/drivers/pc80/mc146818rtc.c (limited to 'src/drivers/pc80/mc146818rtc.c') diff --git a/src/drivers/pc80/mc146818rtc.c b/src/drivers/pc80/mc146818rtc.c new file mode 100644 index 0000000000..99d670de42 --- /dev/null +++ b/src/drivers/pc80/mc146818rtc.c @@ -0,0 +1,340 @@ +#include +#include +#include +#include +#include +#if CONFIG_USE_OPTION_TABLE +#include "option_table.h" +#include +#endif + +/* control registers - Moto names + */ +#define RTC_REG_A 10 +#define RTC_REG_B 11 +#define RTC_REG_C 12 +#define RTC_REG_D 13 + + +/********************************************************************** + * register details + **********************************************************************/ +#define RTC_FREQ_SELECT RTC_REG_A + +/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus, + * reset after update (may take 1.984ms @ 32768Hz RefClock) is complete, + * totalling to a max high interval of 2.228 ms. + */ +# define RTC_UIP 0x80 +# define RTC_DIV_CTL 0x70 + /* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */ +# define RTC_REF_CLCK_4MHZ 0x00 +# define RTC_REF_CLCK_1MHZ 0x10 +# define RTC_REF_CLCK_32KHZ 0x20 + /* 2 values for divider stage reset, others for "testing purposes only" */ +# define RTC_DIV_RESET1 0x60 +# define RTC_DIV_RESET2 0x70 + /* Periodic intr. / Square wave rate select. 0=none, 1=32.8kHz,... 15=2Hz */ +# define RTC_RATE_SELECT 0x0F +# define RTC_RATE_NONE 0x00 +# define RTC_RATE_32786HZ 0x01 +# define RTC_RATE_16384HZ 0x02 +# define RTC_RATE_8192HZ 0x03 +# define RTC_RATE_4096HZ 0x04 +# define RTC_RATE_2048HZ 0x05 +# define RTC_RATE_1024HZ 0x06 +# define RTC_RATE_512HZ 0x07 +# define RTC_RATE_256HZ 0x08 +# define RTC_RATE_128HZ 0x09 +# define RTC_RATE_64HZ 0x0a +# define RTC_RATE_32HZ 0x0b +# define RTC_RATE_16HZ 0x0c +# define RTC_RATE_8HZ 0x0d +# define RTC_RATE_4HZ 0x0e +# define RTC_RATE_2HZ 0x0f + +/**********************************************************************/ +#define RTC_CONTROL RTC_REG_B +# define RTC_SET 0x80 /* disable updates for clock setting */ +# define RTC_PIE 0x40 /* periodic interrupt enable */ +# define RTC_AIE 0x20 /* alarm interrupt enable */ +# define RTC_UIE 0x10 /* update-finished interrupt enable */ +# define RTC_SQWE 0x08 /* enable square-wave output */ +# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +# define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +# define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +/**********************************************************************/ +#define RTC_INTR_FLAGS RTC_REG_C +/* caution - cleared by read */ +# define RTC_IRQF 0x80 /* any of the following 3 is active */ +# define RTC_PF 0x40 +# define RTC_AF 0x20 +# define RTC_UF 0x10 + +/**********************************************************************/ +#define RTC_VALID RTC_REG_D +# define RTC_VRT 0x80 /* valid RAM and time */ +/**********************************************************************/ + +#if CONFIG_USE_OPTION_TABLE +static int rtc_checksum_valid(int range_start, int range_end, int cks_loc) +{ + int i; + u16 sum, old_sum; + sum = 0; + for(i = range_start; i <= range_end; i++) { + sum += cmos_read(i); + } + old_sum = ((cmos_read(cks_loc)<<8) | cmos_read(cks_loc+1))&0x0ffff; + return sum == old_sum; +} + +static void rtc_set_checksum(int range_start, int range_end, int cks_loc) +{ + int i; + u16 sum; + sum = 0; + for(i = range_start; i <= range_end; i++) { + sum += cmos_read(i); + } + cmos_write(((sum >> 8) & 0x0ff), cks_loc); + cmos_write(((sum >> 0) & 0x0ff), cks_loc+1); +} +#endif + +#if CONFIG_ARCH_X86 +#define RTC_CONTROL_DEFAULT (RTC_24H) +#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ) +#else +#if CONFIG_ARCH_ALPHA +#define RTC_CONTROL_DEFAULT (RTC_SQWE | RTC_24H) +#define RTC_FREQ_SELECT_DEFAULT (RTC_REF_CLCK_32KHZ | RTC_RATE_1024HZ) +#endif +#endif + +void rtc_init(int invalid) +{ +#if CONFIG_USE_OPTION_TABLE + unsigned char x; + int cmos_invalid, checksum_invalid; +#endif + + printk(BIOS_DEBUG, "RTC Init\n"); + +#if CONFIG_USE_OPTION_TABLE + /* See if there has been a CMOS power problem. */ + x = cmos_read(RTC_VALID); + cmos_invalid = !(x & RTC_VRT); + + /* See if there is a CMOS checksum error */ + checksum_invalid = !rtc_checksum_valid(PC_CKS_RANGE_START, + PC_CKS_RANGE_END,PC_CKS_LOC); + +#define CLEAR_CMOS 0 + if (invalid || cmos_invalid || checksum_invalid) { + printk(BIOS_WARNING, "RTC:%s%s%s%s\n", + invalid?" Clear requested":"", + cmos_invalid?" Power Problem":"", + checksum_invalid?" Checksum invalid":"", + CLEAR_CMOS?" zeroing cmos":""); +#if CLEAR_CMOS + cmos_write(0, 0x01); + cmos_write(0, 0x03); + cmos_write(0, 0x05); + for(i = 10; i < 48; i++) { + cmos_write(0, i); + } + + if (cmos_invalid) { + /* Now setup a default date of Sat 1 January 2000 */ + cmos_write(0, 0x00); /* seconds */ + cmos_write(0, 0x02); /* minutes */ + cmos_write(1, 0x04); /* hours */ + cmos_write(7, 0x06); /* day of week */ + cmos_write(1, 0x07); /* day of month */ + cmos_write(1, 0x08); /* month */ + cmos_write(0, 0x09); /* year */ + } +#endif + } +#endif + + /* Setup the real time clock */ + cmos_write(RTC_CONTROL_DEFAULT, RTC_CONTROL); + /* Setup the frequency it operates at */ + cmos_write(RTC_FREQ_SELECT_DEFAULT, RTC_FREQ_SELECT); + +#if CONFIG_USE_OPTION_TABLE + /* See if there is a LB CMOS checksum error */ + checksum_invalid = !rtc_checksum_valid(LB_CKS_RANGE_START, + LB_CKS_RANGE_END,LB_CKS_LOC); + if(checksum_invalid) + printk(BIOS_DEBUG, "RTC: coreboot checksum invalid\n"); + + /* Make certain we have a valid checksum */ + rtc_set_checksum(PC_CKS_RANGE_START, + PC_CKS_RANGE_END,PC_CKS_LOC); +#endif + + /* Clear any pending interrupts */ + (void) cmos_read(RTC_INTR_FLAGS); +} + + +#if CONFIG_USE_OPTION_TABLE +/* This routine returns the value of the requested bits + input bit = bit count from the beginning of the cmos image + length = number of bits to include in the value + ret = a character pointer to where the value is to be returned + output the value placed in ret + returns 0 = successful, -1 = an error occurred +*/ +static int get_cmos_value(unsigned long bit, unsigned long length, void *vret) +{ + unsigned char *ret; + unsigned long byte,byte_bit; + unsigned long i; + unsigned char uchar; + + /* The table is checked when it is built to ensure all + values are valid. */ + ret = vret; + byte=bit/8; /* find the byte where the data starts */ + byte_bit=bit%8; /* find the bit in the byte where the data starts */ + if(length<9) { /* one byte or less */ + uchar = cmos_read(byte); /* load the byte */ + uchar >>= byte_bit; /* shift the bits to byte align */ + /* clear unspecified bits */ + ret[0] = uchar & ((1 << length) -1); + } + else { /* more that one byte so transfer the whole bytes */ + for(i=0;length;i++,length-=8,byte++) { + /* load the byte */ + ret[i]=cmos_read(byte); + } + } + return 0; +} + +int get_option(void *dest, const char *name) +{ + struct cmos_option_table *ct; + struct cmos_entries *ce; + size_t namelen; + int found=0; + + /* Figure out how long name is */ + namelen = strnlen(name, CMOS_MAX_NAME_LENGTH); + + /* find the requested entry record */ + ct=cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT); + if (!ct) { + printk(BIOS_ERR, "RTC: cmos_layout.bin could not be found. " + "Options are disabled\n"); + return(-2); + } + ce=(struct cmos_entries*)((unsigned char *)ct + ct->header_length); + for(;ce->tag==LB_TAG_OPTION; + ce=(struct cmos_entries*)((unsigned char *)ce + ce->size)) { + if (memcmp(ce->name, name, namelen) == 0) { + found=1; + break; + } + } + if(!found) { + printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name); + return(-2); + } + + if(get_cmos_value(ce->bit, ce->length, dest)) + return(-3); + if(!rtc_checksum_valid(LB_CKS_RANGE_START, + LB_CKS_RANGE_END,LB_CKS_LOC)) + return(-4); + return(0); +} + +static int set_cmos_value(unsigned long bit, unsigned long length, void *vret) +{ + unsigned char *ret; + unsigned long byte,byte_bit; + unsigned long i; + unsigned char uchar, mask; + unsigned int chksum_update_needed = 0; + + ret = vret; + byte = bit / 8; /* find the byte where the data starts */ + byte_bit = bit % 8; /* find the bit in the byte where the data starts */ + if(length <= 8) { /* one byte or less */ + mask = (1 << length) - 1; + mask <<= byte_bit; + + uchar = cmos_read(byte); + uchar &= ~mask; + uchar |= (ret[0] << byte_bit); + cmos_write(uchar, byte); + if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END) + chksum_update_needed = 1; + } else { /* more that one byte so transfer the whole bytes */ + if (byte_bit || length % 8) + return -1; + + for(i=0; length; i++, length-=8, byte++) + cmos_write(ret[i], byte); + if (byte >= LB_CKS_RANGE_START && byte <= LB_CKS_RANGE_END) + chksum_update_needed = 1; + } + + if (chksum_update_needed) { + rtc_set_checksum(LB_CKS_RANGE_START, + LB_CKS_RANGE_END,LB_CKS_LOC); + } + return 0; +} + + +int set_option(const char *name, void *value) +{ + struct cmos_option_table *ct; + struct cmos_entries *ce; + unsigned long length; + size_t namelen; + int found=0; + + /* Figure out how long name is */ + namelen = strnlen(name, CMOS_MAX_NAME_LENGTH); + + /* find the requested entry record */ + ct=cbfs_find_file("cmos_layout.bin", CBFS_COMPONENT_CMOS_LAYOUT); + if (!ct) { + printk(BIOS_ERR, "cmos_layout.bin could not be found. Options are disabled\n"); + return(-2); + } + ce=(struct cmos_entries*)((unsigned char *)ct + ct->header_length); + for(;ce->tag==LB_TAG_OPTION; + ce=(struct cmos_entries*)((unsigned char *)ce + ce->size)) { + if (memcmp(ce->name, name, namelen) == 0) { + found=1; + break; + } + } + if(!found) { + printk(BIOS_DEBUG, "WARNING: No CMOS option '%s'.\n", name); + return(-2); + } + + length = ce->length; + if (ce->config == 's') { + length = MAX(strlen((const char *)value) * 8, ce->length - 8); + /* make sure the string is null terminated */ + if ((set_cmos_value(ce->bit + ce->length - 8, 8, &(u8[]){0}))) + return (-3); + } + + if ((set_cmos_value(ce->bit, length, value))) + return (-3); + + return 0; +} +#endif /* CONFIG_USE_OPTION_TABLE */ -- cgit v1.2.3