From 34e10871f9f1004a0c007a26d2d77440997fafa1 Mon Sep 17 00:00:00 2001 From: "Sebastian \"Swift Geek\" Grzywna" Date: Thu, 8 Sep 2016 02:05:31 +0200 Subject: intel/gma: Fix typo GMBUS0 -> GMBUS1 in edid.c This typo existed in code before rewriting for using defines and it's clearly visible after rewrite. Previously it was writing to reserved area of GMBUS0 register, while values are matching those of GMBUS1. This line probably is a no-op since it's just sending the STOP again (without an address set this time). Change-Id: Ic85ef925c41ad01ed469f9d4f4412cbe44ca6d8e Signed-off-by: Sebastian "Swift Geek" Grzywna Reviewed-on: https://review.coreboot.org/16341 Reviewed-by: Arthur Heymans Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel Reviewed-by: Nico Huber --- src/drivers/intel/gma/edid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'src/drivers/intel/gma/edid.c') diff --git a/src/drivers/intel/gma/edid.c b/src/drivers/intel/gma/edid.c index 390209446f..316e869544 100644 --- a/src/drivers/intel/gma/edid.c +++ b/src/drivers/intel/gma/edid.c @@ -56,7 +56,7 @@ static void intel_gmbus_stop_bus(u8 * mmio, u8 bus) write32(GMBUS1_ADDR, GMBUS_SW_RDY | GMBUS_CYCLE_STOP | GMBUS_SLAVE_WRITE | (AT24_ADDR << 1) ); wait_rdy(mmio); - write32(GMBUS0_ADDR, GMBUS_SW_RDY | GMBUS_CYCLE_STOP); + write32(GMBUS1_ADDR, GMBUS_SW_RDY | GMBUS_CYCLE_STOP); write32(GMBUS2_ADDR, GMBUS_INUSE); } @@ -101,7 +101,7 @@ void intel_gmbus_read_edid(u8 *mmio, u8 bus, u8 slave, u8 *edid, u32 edid_size) | GMBUS_SLAVE_WRITE | GMBUS_CYCLE_WAIT | GMBUS_CYCLE_STOP | (128 << GMBUS_BYTE_COUNT_SHIFT) | (slave << 1) ); wait_rdy(mmio); - write32(GMBUS0_ADDR, GMBUS_SW_RDY | GMBUS_CYCLE_STOP ); + write32(GMBUS1_ADDR, GMBUS_SW_RDY | GMBUS_CYCLE_STOP ); write32(GMBUS2_ADDR, GMBUS_INUSE); printk (BIOS_SPEW, "EDID:\n"); -- cgit v1.2.3