From 0786bc6ad89449f810e169c131da2047af9a7048 Mon Sep 17 00:00:00 2001 From: Vikram Narayanan Date: Mon, 26 Dec 2011 22:52:01 +0530 Subject: Indentation: Various indentation fixes Fixed indentation using indent tool in the src/drivers/i2c tree Change-Id: I5b396e5753544aff13ac5d16afc59e193a6b1da1 Signed-off-by: Vikram Narayanan Reviewed-on: http://review.coreboot.org/506 Tested-by: build bot (Jenkins) Reviewed-by: Kerry Sheh Reviewed-by: Marc Jones --- src/drivers/i2c/adm1026/adm1026.c | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'src/drivers/i2c/adm1026/adm1026.c') diff --git a/src/drivers/i2c/adm1026/adm1026.c b/src/drivers/i2c/adm1026/adm1026.c index 14b07aa90c..1aaae52e6d 100644 --- a/src/drivers/i2c/adm1026/adm1026.c +++ b/src/drivers/i2c/adm1026/adm1026.c @@ -7,7 +7,7 @@ #include #include "chip.h" -#define ADM1026_DEVICE 0x2d /* Either 0x2c or 0x2d or 0x2e */ +#define ADM1026_DEVICE 0x2d /* Either 0x2c or 0x2d or 0x2e */ #define ADM1026_REG_CONFIG1 0x00 #define CFG1_MONITOR 0x01 #define CFG1_INT_ENABLE 0x02 @@ -24,38 +24,38 @@ static void adm1026_enable_monitoring(device_t dev); static void adm1026_init(device_t dev) { - if (dev->enabled && dev->path.type == DEVICE_PATH_I2C) - { - if(ops_smbus_bus(get_pbus_smbus(dev))) { - if( dev->bus->dev->path.type == DEVICE_PATH_I2C) smbus_set_link(dev); // it is under mux + if (dev->enabled && dev->path.type == DEVICE_PATH_I2C) { + if (ops_smbus_bus(get_pbus_smbus(dev))) { + if (dev->bus->dev->path.type == DEVICE_PATH_I2C) + smbus_set_link(dev); // it is under mux adm1026_enable_monitoring(dev); } - } - } + static void adm1026_enable_monitoring(device_t dev) { - int result; - result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); + int result; + result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); - result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET); - result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result); + result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET); + result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result); - result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); - if (!(result & CFG1_MONITOR)) { - printk(BIOS_DEBUG, "ADM1026: monitoring would not enable"); - } + result = smbus_read_byte(dev, ADM1026_REG_CONFIG1); + if (!(result & CFG1_MONITOR)) { + printk(BIOS_DEBUG, "ADM1026: monitoring would not enable"); + } } + static void adm1026_noop(device_t dummy) { } static struct device_operations adm1026_operations = { - .read_resources = adm1026_noop, - .set_resources = adm1026_noop, - .enable_resources = adm1026_noop, - .init = adm1026_init, + .read_resources = adm1026_noop, + .set_resources = adm1026_noop, + .enable_resources = adm1026_noop, + .init = adm1026_init, }; static void enable_dev(struct device *dev) -- cgit v1.2.3