From db44be9405ae4b62b525fb7dad80e20c499cc07b Mon Sep 17 00:00:00 2001
From: "Ronald G. Minnich" <rminnich@gmail.com>
Date: Mon, 20 Mar 2006 20:49:34 +0000
Subject: added definitions. added cpubug support. added object. Commented out
 msr set in northbridge that conflicted with the cpubug support.

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2218 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
---
 src/cpu/amd/model_gx2/Config.lb |   1 +
 src/cpu/amd/model_gx2/cpubug.c  | 364 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 365 insertions(+)
 create mode 100644 src/cpu/amd/model_gx2/cpubug.c

(limited to 'src/cpu')

diff --git a/src/cpu/amd/model_gx2/Config.lb b/src/cpu/amd/model_gx2/Config.lb
index b643d778eb..8fe6dda21d 100644
--- a/src/cpu/amd/model_gx2/Config.lb
+++ b/src/cpu/amd/model_gx2/Config.lb
@@ -4,3 +4,4 @@ dir /cpu/x86/mmx
 dir /cpu/x86/lapic
 dir /cpu/x86/cache
 driver model_gx2_init.o
+object cpubug.o
diff --git a/src/cpu/amd/model_gx2/cpubug.c b/src/cpu/amd/model_gx2/cpubug.c
new file mode 100644
index 0000000000..02fce1a0b6
--- /dev/null
+++ b/src/cpu/amd/model_gx2/cpubug.c
@@ -0,0 +1,364 @@
+#include <cpu/amd/model_gx2/gx2def.h>
+
+void
+cpubug(void){
+	msr_t msr;
+	int rev;
+
+	msr = rdmsr(GLCP_CHIP_REVID);
+
+	rev = msr.lo & 0xff;
+	if (rev < 0x20) {
+		printk_error("%s: rev < 0x20! bailing!\n");
+		return;
+	}
+	
+	switch(rev)
+	{
+		case 0x20:
+			pcideadlock();
+			eng1398();
+			bug752();
+			break;
+		case 0x22:
+			pcideadlock();
+			eng1398();
+			eng2900();
+			bug 118339();
+			break;
+		case 0x22:
+		case 0x30: 
+			break;
+		default:
+			printk_error("unknown rev %x, bailing\n", rev);
+			return;
+	}
+	bug784();
+	bug118253();
+	disablememoryreadorder();
+}
+
+#if 0
+void
+bug645(void){
+	msr_t msr;
+	rdmsr(CPU_ID_CONFIG);
+	msr.whatever |= ID_CONFIG_SERIAL_SET;
+	wrmsr(msr);
+}
+
+void
+bug573(void){
+	msr_t msr;
+
+	msr = rdmsr(MC_GLD_MSR_PM);
+	msr.eax &= 0xfff3;
+	wrmsr(MC_GLD_MSR_PM);
+}
+
+static void
+pcideadlock(void){
+	msr_t msr;
+
+	msr = rdmsr(CPU_DM_CONFIG0);
+	msr.hi &= ~(7<<DM_CONFIG0_UPPER_WSREQ_SHIFT);
+	msr.hi |= (2<<DM_CONFIG0_UPPER_WSREQ_SHIFT);
+	msr.lo |= DM_CONFIG0_LOWER_MISSER_SET;
+	wrmsr(CPU_DM_CONFIG0, msr);
+
+
+
+	msr = rdmsr(CPU_IM_CONFIG);
+	msr.lo |= IM_CONFIG_LOWER_QWT_SET;	/* interlock instruction fetches to WS regions with data accesses.
+									  * This prevents in instruction fetch from going out to PCI if the 
+									  * data side is about to make a request.
+									  */
+	wrmsr(CPU_IM_CONFIG, msr);
+	/* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/
+
+	msr.lo = 0x021212121;
+	msr.hi = 0x021212121
+	wrmsr( CPU_RCONF_A0_BF, msr);
+	wrmsr( CPU_RCONF_C0_DF, msr);
+	wrmsr( CPU_RCONF_E0_FF, msr);
+}
+
+;**************************************************************************
+;*
+;*	CPUbug784
+;*
+;*	Bugtool #784 + #792
+;*
+;*	Fix CPUID instructions for < 3.0 CPUs
+;*
+;*	Entry:
+;*	Exit:
+;*	Modified:
+;*
+;**************************************************************************
+
+void cpubug784(void){
+	static char *name = "Geode by NSC";
+
+	/* we'll do this the stupid way, for now, but that's the string they want. NO ONE KNOWS why you
+	  * would do this -- the OS can figure this type of stuff out!
+	  */
+	msr = rdmsr(0x3006);
+	msr.hi = 0x646f6547;
+	wrmsr(0x3006, msr);
+
+	msr = rdmsr(0x3007);
+	msr.hi = 0x79622065;
+	msr.lo = 0x43534e20;
+	wrmsr(0x3007, msr);
+
+	msr = rdmsr(0x3002);
+	wrmsr(*0x3008, msr);
+
+; More CPUID to match AMD better. #792
+	msr = rdmsr(0x3009);
+	msr.hi = 0x0C0C0A13D;
+	msr.lo = 0x00000000;
+	wrmsr(0x3009, msr);
+}
+
+/* cpubug 1398: enable MC if we KNOW we have DDR*/
+void
+eng1398(void){
+	msr_t msr;
+
+	msr = rdmsr(MSR_GLCP+0x17);
+	if ((msr.lo & 0xff) < CPU_REV_2_0) {
+		msr = rdmsr(GLCP_SYS_RSTPLL);
+	i	if (msr.lo & (1<<RSTPPL_LOWER_SDRMODE_SHIFT))
+			return;
+	}
+
+	/* no bios to check, we just go for it? */
+	msr = rdmsr(MC_GLD_MSR_PM);
+	msr.lo |= 3; /* enable MC clock gating.*/
+	wrmsr(MC_GLD_MSR_PM, msr);
+}
+
+void
+eng2900{void){
+	printk_err(" NOT DOING eng2900: only shown to be a windows problem\n");
+#if 0
+
+;**************************************************************************
+;*
+;*	CPUbugIAENG2900
+;*
+;*	Clear Quest IAENG00002900, VSS 118.150
+;*
+;*	BTB issue causes blue screen in windows.
+;*
+;*	Entry:
+;*	Exit:
+;*	Modified:
+;*
+;**************************************************************************
+CPUbugIAENG2900	PROC NEAR PUBLIC
+	pushad
+
+; Clear bit 43, disables the sysenter/sysexit in CPUID3
+	mov	ecx, 3003h
+	RDMSR
+	and	edx, 0FFFFF7FFh
+	WRMSR
+
+	mov	cx, TOKEN_BTB_2900_SWAPSIF_ENABLE
+	NOSTACK	bx, GetNVRAMValueBX
+	cmp	ax, TVALUE_ENABLE
+	jne	bug2900exit
+
+
+;Disable enable_actions in DIAGCTL while setting up GLCP
+	mov	ecx, MSR_GLCP + 005fh
+	xor	edx, edx
+	xor	eax, eax
+	WRMSR
+
+;Changing DBGCLKCTL register to GeodeLink
+	mov	ecx, MSR_GLCP + 0016h
+	xor	edx, edx
+	xor	eax, eax
+	WRMSR
+
+	mov	ecx, MSR_GLCP + 0016h
+	xor	edx, edx
+	mov	eax, 02h
+	WRMSR
+
+;The code below sets up the RedCloud to stall for 4 GeodeLink clocks when CPU is snooped.
+;Because setting XSTATE to 0 overrides any other XSTATE action, the code will always
+;stall for 4 GeodeLink clocks after a snoop request goes away even if it occured a clock or two 
+;later than a different snoop; the stall signal will never 'glitch high' for 
+;only one or two CPU clocks with this code.
+
+;Send mb0 port 3 requests to upper GeodeLink diag bits [63:32]
+	mov	ecx, MSR_GLIU0 + 2005h
+	xor	edx, edx
+	mov	eax, 80338041h
+	WRMSR
+
+;set5m watches request ready from mb0 to CPU (snoop)
+	mov	ecx, MSR_GLCP + 0045h
+	mov	edx, 5ad68000h
+	xor	eax, eax
+	WRMSR
+
+;SET4M will be high when state is idle (XSTATE=11)
+	mov	ecx, MSR_GLCP + 0044h
+	xor	edx, edx
+	mov	eax, 0140h
+	WRMSR
+
+;SET5n to watch for processor stalled state
+	mov	ecx, MSR_GLCP + 004Dh
+	mov	edx, 2000h
+	xor	eax, eax
+	WRMSR
+
+;Writing action number 13: XSTATE=0 to occur when CPU is snooped unless we're stalled
+	mov	ecx, MSR_GLCP + 0075h
+	xor	edx, edx
+	mov	eax, 00400000h
+	WRMSR
+
+;Writing action number 11: inc XSTATE every GeodeLink clock unless we're idle
+	mov	ecx, MSR_GLCP + 0073h
+	xor	edx, edx
+	mov	eax, 30000h
+	WRMSR
+
+
+;Writing action number 5: STALL_CPU_PIPE when exitting idle state or not in idle state
+	mov	ecx, MSR_GLCP + 006Dh
+	xor	edx, edx
+	mov	eax, 00430000h
+	WRMSR
+
+;Writing DIAGCTL Register to enable the stall action and to let set5m watch the upper GeodeLink diag bits.
+	mov	ecx, MSR_GLCP + 005fh
+	xor	edx, edx
+	mov	eax, 80004000h
+	WRMSR
+
+
+bug2900exit:
+	popad
+	ret
+CPUbugIAENG2900	ENDP
+#endif
+}
+
+void eng118253(void){
+	msr_t msr;
+
+	msr = rdmsr(GLPCI_SPARE);
+	msr.lo &= ~GLPCI_SPARE_LOWER_PPC_SET;
+	wrmsr(GLPCI_SPARE, msr);
+}
+void
+bug118339(void) {
+	printk_err("This is OPTIONAL BIOS-ENABLED ... ignore for now\n");
+#if 0
+	PROC NEAR PUBLIC
+	pushad
+
+	mov	cx, TOKEN_VGTEAR_118339_SWAPSIF_ENABLE
+	NOSTACK	bx, GetNVRAMValueBX
+	cmp	ax, TVALUE_ENABLE
+	jne	bug118339exit
+
+;Disable enable_actions in DIAGCTL while setting up GLCP
+	mov	ecx, MSR_GLCP + 005fh
+	xor	edx, edx
+	xor	eax, eax
+	WRMSR
+
+; SET2M fires if VG pri is odd (3, not 2) and Ystate=0
+	mov	ecx, MSR_GLCP + 042h
+;	mov	edx, 2d6b8000h
+	mov	edx, 596b8000h
+	mov	eax, 00000a00h
+	WRMSR
+
+; SET3M fires if MBUS changed and VG pri is odd
+	mov	ecx, MSR_GLCP + 043h
+	mov	edx, 596b8040h
+	xor	eax, eax
+	WRMSR
+
+; Put VG request data on lower diag bus
+	mov	ecx, MSR_GLIU0 + 2005h
+	xor	edx, edx
+	mov	eax, 80338041h
+	WRMSR
+
+; Increment Y state if SET3M if true
+	mov	ecx, MSR_GLCP + 074h
+	xor	edx, edx
+	mov	eax, 0000c000h
+	WRMSR
+
+; Set up MBUS action to PRI=3 read of MBIU
+	mov	ecx, MSR_GLCP + 020h
+	mov	edx, 0000d863h
+	mov	eax, 20002000h
+	WRMSR
+
+; Trigger MBUS action if VG=pri3 and Y=0, this blocks most PCI
+	mov	ecx, MSR_GLCP + 071h
+	xor	edx, edx
+	mov	eax, 00000c00h
+	WRMSR
+
+;Writing DIAGCTL
+	mov	ecx, MSR_GLCP + 005fh
+	xor	edx, edx
+	mov	eax, 80004000h
+	WRMSR
+
+	; Code to enable FS2 even when BTB and VGTEAR SWAPSiFs are enabled
+	; As per Todd Roberts in PBz1094 and PBz1095
+	; Moved from CPUREG to CPUBUG per Tom Sylla
+	mov	ecx, 04C000042h	; GLCP SETMCTL Register
+	rdmsr
+	or	edx, 8			; Bit 35 = MCP_IN
+	wrmsr
+	
+bug118339exit:
+	popad
+	ret
+CPUbug118339	ENDP
+#endif
+}
+
+
+
+/****************************************************************************/
+/***/
+/**	DisableMemoryReorder*/
+/***/
+/**	PBZ 3659:*/
+/**	 The MC reordered transactions incorrectly and breaks coherency.*/
+/**	 Disable reording and take a potential performance hit.*/
+/**	 This is safe to do here and not in MC init since there is nothing*/
+/**	 to maintain coherency with and the cache is not enabled yet.*/
+/***/
+/***/
+/**	Entry:*/
+/**	Exit:*/
+/**	Modified:*/
+/***/
+/****************************************************************************/
+void
+DisableMemoryReorder(void) {	
+	msr_t msr;
+	msr = rdmsr(MC_CF8F_DATA);
+
+	msr.hi |=  CF8F_UPPER_REORDER_DIS_SET);
+	wrmsr(MC_CF8F_DATA, msr);
+}
-- 
cgit v1.2.3