From 88e4691ed9f580b468005fd3ffec148b6e00e9ae Mon Sep 17 00:00:00 2001 From: "Ronald G. Minnich" Date: Tue, 29 Jan 2013 14:16:35 -0800 Subject: Exynos5250: add debug prints to DDR3 startup code. It can be handy to have debug prints as DRAM is started up, so that in the case of failure (does that ever happen?) you've got some idea where it failed. This patch adds some DEBUG_SPEW prints to the DDR3 code. I am doing this as its own CL because we may find we want to revert it. That's unlikely but it is not impossible if we skew the timing in some way. This code works for some trivial DRAM tests. Change-Id: I57e8d2a2d8df6b8ec8cd0d414681fc513e9999e3 Signed-off-by: Ronald G. Minnich Reviewed-on: http://review.coreboot.org/2222 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks --- src/cpu/samsung/exynos5250/dmc_init_ddr3.c | 31 ++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) (limited to 'src/cpu') diff --git a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c index 6ef10bfc91..541f749616 100644 --- a/src/cpu/samsung/exynos5250/dmc_init_ddr3.c +++ b/src/cpu/samsung/exynos5250/dmc_init_ddr3.c @@ -24,6 +24,7 @@ #include #include +#include //#include "clock.h" /* FIXME(dhendrix): untangle clock/clk ... */ #include @@ -67,28 +68,37 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; - + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: reset phy: "); reset_phy_ctrl(); + printk(BIOS_SPEW, "done\n"); /* Set Impedance Output Driver */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Set Impedance Output Driver\n"); + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: mem->impedance 0x%x\n", + mem->impedance); val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | (mem->impedance << CA_CKE_DRVR_DS_OFFSET) | (mem->impedance << CA_CS_DRVR_DS_OFFSET) | (mem->impedance << CA_ADR_DRVR_DS_OFFSET); + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: val 0x%x\n", val); writel(val, &phy0_ctrl->phy_con39); writel(val, &phy1_ctrl->phy_con39); /* Set Read Latency and Burst Length for PHY0 and PHY1 */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " + "Set Read Latency and Burst Length for PHY0 and PHY1\n"); val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); writel(val, &phy0_ctrl->phy_con42); writel(val, &phy1_ctrl->phy_con42); /* ZQ Calibration */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: ZQ Calibration\n"); if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) return SETUP_ERR_ZQ_CALIBRATION_FAILURE; /* DQ Signal */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: DQ Signal\n"); writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14); writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14); @@ -99,6 +109,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) update_reset_dll(dmc, DDR_MODE_DDR3); /* DQS Signal */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: DQS Signal\n"); writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); writel(mem->phy1_dqs, &phy1_ctrl->phy_con4); @@ -116,6 +127,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) writel(val, &phy1_ctrl->phy_con12); /* Start DLL locking */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Start DLL Locking\n"); writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), &phy0_ctrl->phy_con12); writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), @@ -127,9 +139,12 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) &dmc->concontrol); /* Memory Channel Inteleaving Size */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " + "Memory Channel Inteleaving Size\n"); writel(mem->iv_size, &dmc->ivcontrol); /* Set DMC MEMCONTROL register */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Set DMC MEMCONTROL register\n"); val = mem->memcontrol & ~DMC_MEMCONTROL_DSREF_ENABLE; writel(val, &dmc->memcontrol); @@ -139,10 +154,13 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) writel(mem->membaseconfig1, &dmc->membaseconfig1); /* Precharge Configuration */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Precharge Configuration\n"); writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, &dmc->prechconfig); /* Power Down mode Configuration */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " + "Power Down mode Configuraation\n"); writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, &dmc->pwrdnconfig); @@ -150,15 +168,19 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) /* TimingRow, TimingData, TimingPower and Timingaref * values as per Memory AC parameters */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " + "TimingRow, TimingData, TimingPower and Timingaref\n"); writel(mem->timing_ref, &dmc->timingref); writel(mem->timing_row, &dmc->timingrow); writel(mem->timing_data, &dmc->timingdata); writel(mem->timing_power, &dmc->timingpower); /* Send PALL command */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Send PALL Command\n"); dmc_config_prech(mem, dmc); /* Send NOP, MRS and ZQINIT commands */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Send NOP, MRS, and ZQINIT\n"); dmc_config_mrs(mem, dmc); if (mem->gate_leveling_enable) { @@ -217,8 +239,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) sdelay(100); i--; } - if (!i) + if (!i){ + printk(BIOS_SPEW, "Timeout on RDLVL. No DRAM.\n"); return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; + } writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config); writel(0, &phy0_ctrl->phy_con14); @@ -238,11 +262,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) } /* Send PALL command */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: Send PALL Command\n"); dmc_config_prech(mem, dmc); writel(mem->memcontrol, &dmc->memcontrol); /* Set DMC Concontrol and enable auto-refresh counter */ + printk(BIOS_SPEW, "ddr3_mem_ctrl_init: " + "Set DMC Concontrol and enable auto-refresh counter\n"); writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol); return 0; -- cgit v1.2.3