From 7f46420f4c85e7b296bfb4e8b3796a152e24b5fb Mon Sep 17 00:00:00 2001 From: Vladimir Serbinenko Date: Thu, 28 May 2015 21:03:51 +0200 Subject: Migrate fsp_206ax to SMM_MODULES This gets rid of ugly tseg_relocate for fsp_bd82x6x. This is adaptation of a3e41c089602c58409e8dfd4aceecbdd7d4f4a5b Change-Id: I4e80e6e98d3a6da3e3e480e9368fae1b3ed67cd6 Signed-off-by: Vladimir Serbinenko Reviewed-on: http://review.coreboot.org/10353 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/cpu/intel/fsp_model_206ax/Kconfig | 1 + src/cpu/intel/fsp_model_206ax/Makefile.inc | 2 + src/cpu/intel/fsp_model_206ax/model_206ax.h | 1 + src/cpu/intel/fsp_model_206ax/smmrelocate.c | 333 ++++++++++++++++++++++++++++ src/cpu/x86/smm/smmrelocate.S | 12 +- 5 files changed, 338 insertions(+), 11 deletions(-) create mode 100644 src/cpu/intel/fsp_model_206ax/smmrelocate.c (limited to 'src/cpu') diff --git a/src/cpu/intel/fsp_model_206ax/Kconfig b/src/cpu/intel/fsp_model_206ax/Kconfig index 3280f77d8e..b1a5e0910f 100644 --- a/src/cpu/intel/fsp_model_206ax/Kconfig +++ b/src/cpu/intel/fsp_model_206ax/Kconfig @@ -37,6 +37,7 @@ config CPU_SPECIFIC_OPTIONS select SSE2 select UDELAY_LAPIC select SMM_TSEG + select SMM_MODULES select SUPPORT_CPU_UCODE_IN_CBFS if HAVE_FSP_BIN select PARALLEL_CPU_INIT select TSC_SYNC_MFENCE diff --git a/src/cpu/intel/fsp_model_206ax/Makefile.inc b/src/cpu/intel/fsp_model_206ax/Makefile.inc index 577d44e430..4e0f95632a 100644 --- a/src/cpu/intel/fsp_model_206ax/Makefile.inc +++ b/src/cpu/intel/fsp_model_206ax/Makefile.inc @@ -13,3 +13,5 @@ ifneq ($(wildcard $(shell readlink -f "$(top)/$(CONFIG_MICROCODE_INCLUDE_PATH)") CPPFLAGS_common += -I$(CONFIG_MICROCODE_INCLUDE_PATH) endif endif + +ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smmrelocate.c diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax.h b/src/cpu/intel/fsp_model_206ax/model_206ax.h index 49d995b40d..bf5de53705 100644 --- a/src/cpu/intel/fsp_model_206ax/model_206ax.h +++ b/src/cpu/intel/fsp_model_206ax/model_206ax.h @@ -106,6 +106,7 @@ void intel_model_206ax_finalize_smm(void); /* Configure power limits for turbo mode */ void set_power_limits(u8 power_limit_1_time); int cpu_config_tdp_levels(void); +void smm_relocate(void); #endif #endif diff --git a/src/cpu/intel/fsp_model_206ax/smmrelocate.c b/src/cpu/intel/fsp_model_206ax/smmrelocate.c new file mode 100644 index 0000000000..c2f671218f --- /dev/null +++ b/src/cpu/intel/fsp_model_206ax/smmrelocate.c @@ -0,0 +1,333 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2013 ChromeOS Authors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "model_206ax.h" + +#define EMRRphysBase_MSR 0x1f4 +#define EMRRphysMask_MSR 0x1f5 +#define UNCORE_EMRRphysBase_MSR 0x2f4 +#define UNCORE_EMRRphysMask_MSR 0x2f5 + +#define CORE_THREAD_COUNT_MSR 0x35 + +#define SMRR_SUPPORTED (1<<11) +#define EMRR_SUPPORTED (1<<12) + +struct smm_relocation_params { + u32 smram_base; + u32 smram_size; + u32 ied_base; + u32 ied_size; + msr_t smrr_base; + msr_t smrr_mask; + msr_t emrr_base; + msr_t emrr_mask; + msr_t uncore_emrr_base; + msr_t uncore_emrr_mask; +}; + +/* This gets filled in and used during relocation. */ +static struct smm_relocation_params smm_reloc_params; + +static inline void write_smrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, "Writing SMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->smrr_base.lo, relo_params->smrr_mask.lo); + wrmsr(SMRRphysBase_MSR, relo_params->smrr_base); + wrmsr(SMRRphysMask_MSR, relo_params->smrr_mask); +} + +static inline void write_emrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, "Writing EMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->emrr_base.lo, relo_params->emrr_mask.lo); + wrmsr(EMRRphysBase_MSR, relo_params->emrr_base); + wrmsr(EMRRphysMask_MSR, relo_params->emrr_mask); +} + +static inline void write_uncore_emrr(struct smm_relocation_params *relo_params) +{ + printk(BIOS_DEBUG, + "Writing UNCORE_EMRR. base = 0x%08x, mask=0x%08x\n", + relo_params->uncore_emrr_base.lo, + relo_params->uncore_emrr_mask.lo); + wrmsr(UNCORE_EMRRphysBase_MSR, relo_params->uncore_emrr_base); + wrmsr(UNCORE_EMRRphysMask_MSR, relo_params->uncore_emrr_mask); +} + +/* The relocation work is actually performed in SMM context, but the code + * resides in the ramstage module. This occurs by trampolining from the default + * SMRAM entry point to here. */ +static void asmlinkage cpu_smm_do_relocation(void *arg) +{ + em64t101_smm_state_save_area_t *save_state; + msr_t mtrr_cap; + struct smm_relocation_params *relo_params; + const struct smm_module_params *p; + const struct smm_runtime *runtime; + int cpu; + + p = arg; + runtime = p->runtime; + relo_params = p->arg; + cpu = p->cpu; + + if (cpu >= CONFIG_MAX_CPUS) { + printk(BIOS_CRIT, + "Invalid CPU number assigned in SMM stub: %d\n", cpu); + return; + } + + printk(BIOS_DEBUG, "In relocation handler: cpu %d\n", cpu); + + /* All threads need to set IEDBASE and SMBASE in the save state area. + * Since one thread runs at a time during the relocation the save state + * is the same for all cpus. */ + save_state = (void *)(runtime->smbase + SMM_DEFAULT_SIZE - + runtime->save_state_size); + + /* The relocated handler runs with all CPUs concurrently. Therefore + * stagger the entry points adjusting SMBASE downwards by save state + * size * CPU num. */ + save_state->smbase = relo_params->smram_base - + cpu * runtime->save_state_size; + save_state->iedbase = relo_params->ied_base; + + printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x @ %p\n", + save_state->smbase, save_state->iedbase, save_state); + + /* Write EMRR and SMRR MSRs based on indicated support. */ + mtrr_cap = rdmsr(MTRRcap_MSR); + if (mtrr_cap.lo & SMRR_SUPPORTED) + write_smrr(relo_params); + + if (mtrr_cap.lo & EMRR_SUPPORTED) { + write_emrr(relo_params); + /* UNCORE_EMRR msrs are package level. Therefore, only + * configure these MSRs on the BSP. */ + if (cpu == 0) + write_uncore_emrr(relo_params); + } + + southbridge_clear_smi_status(); +} + +static u32 northbridge_get_base_reg(device_t dev, int reg) +{ + u32 value; + + value = pci_read_config32(dev, reg); + /* Base registers are at 1MiB granularity. */ + value &= ~((1 << 20) - 1); + return value; +} + +static void fill_in_relocation_params(device_t dev, + struct smm_relocation_params *params) +{ + u32 tseg_size; + u32 tsegmb; + u32 bgsm; + u32 emrr_base; + u32 emrr_size; + int phys_bits; + /* All range registers are aligned to 4KiB */ + const u32 rmask = ~((1 << 12) - 1); + + /* Some of the range registers are dependent on the number of physical + * address bits supported. */ + phys_bits = cpuid_eax(0x80000008) & 0xff; + + /* The range bounded by the TSEGMB and BGSM registers encompasses the + * SMRAM range as well as the IED range. However, the SMRAM available + * to the handler is 4MiB since the IEDRAM lives TSEGMB + 4MiB. + */ + tsegmb = northbridge_get_base_reg(dev, TSEG); + bgsm = northbridge_get_base_reg(dev, BGSM); + tseg_size = bgsm - tsegmb; + + params->smram_base = tsegmb; + params->smram_size = 4 << 20; + params->ied_base = tsegmb + params->smram_size; + params->ied_size = tseg_size - params->smram_size; + + /* SMRR has 32-bits of valid address aligned to 4KiB. */ + params->smrr_base.lo = (params->smram_base & rmask) | MTRR_TYPE_WRBACK; + params->smrr_base.hi = 0; + params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRRphysMaskValid; + params->smrr_mask.hi = 0; + + /* The EMRR and UNCORE_EMRR are at IEDBASE + 2MiB */ + emrr_base = (params->ied_base + (2 << 20)) & rmask; + emrr_size = params->ied_size - (2 << 20); + + /* EMRR has 46 bits of valid address aligned to 4KiB. It's dependent + * on the number of physical address bits supported. */ + params->emrr_base.lo = emrr_base | MTRR_TYPE_WRBACK; + params->emrr_base.hi = 0; + params->emrr_mask.lo = (~(emrr_size - 1) & rmask) | MTRRphysMaskValid; + params->emrr_mask.hi = (1 << (phys_bits - 32)) - 1; + + /* UNCORE_EMRR has 39 bits of valid address aligned to 4KiB. */ + params->uncore_emrr_base.lo = emrr_base; + params->uncore_emrr_base.hi = 0; + params->uncore_emrr_mask.lo = (~(emrr_size - 1) & rmask) | + MTRRphysMaskValid; + params->uncore_emrr_mask.hi = (1 << (39 - 32)) - 1; +} + +static int install_relocation_handler(int num_cpus, + struct smm_relocation_params *relo_params) +{ + /* The default SMM entry happens serially at the default location. + * Therefore, there is only 1 concurrent save state area. Set the + * stack size to the save state size, and call into the + * do_relocation handler. */ + int save_state_size = sizeof(em64t101_smm_state_save_area_t); + struct smm_loader_params smm_params = { + .per_cpu_stack_size = save_state_size, + .num_concurrent_stacks = num_cpus, + .per_cpu_save_state_size = save_state_size, + .num_concurrent_save_states = 1, + .handler = &cpu_smm_do_relocation, + .handler_arg = (void *)relo_params, + }; + + return smm_setup_relocation_handler(&smm_params); +} + +static void setup_ied_area(struct smm_relocation_params *params) +{ + char *ied_base; + + struct ied_header ied = { + .signature = "INTEL RSVD", + .size = params->ied_size, + .reserved = {0}, + }; + + ied_base = (void *)params->ied_base; + + /* Place IED header at IEDBASE. */ + memcpy(ied_base, &ied, sizeof(ied)); + + /* Zero out 32KiB at IEDBASE + 1MiB */ + memset(ied_base + (1 << 20), 0, (32 << 10)); +} + +static int install_permanent_handler(int num_cpus, + struct smm_relocation_params *relo_params) +{ + /* There are num_cpus concurrent stacks and num_cpus concurrent save + * state areas. Lastly, set the stack size to the save state size. */ + int save_state_size = sizeof(em64t101_smm_state_save_area_t); + struct smm_loader_params smm_params = { + .per_cpu_stack_size = save_state_size, + .num_concurrent_stacks = num_cpus, + .per_cpu_save_state_size = save_state_size, + .num_concurrent_save_states = num_cpus, + }; + + printk(BIOS_DEBUG, "Installing SMM handler to 0x%08x\n", + relo_params->smram_base); + return smm_load_module((void *)relo_params->smram_base, + relo_params->smram_size, &smm_params); +} + +static int cpu_smm_setup(void) +{ + device_t dev; + int num_cpus; + msr_t msr; + + printk(BIOS_DEBUG, "Setting up SMI for CPU\n"); + + dev = dev_find_slot(0, PCI_DEVFN(0, 0)); + + fill_in_relocation_params(dev, &smm_reloc_params); + + setup_ied_area(&smm_reloc_params); + + msr = rdmsr(CORE_THREAD_COUNT_MSR); + num_cpus = msr.lo & 0xffff; + if (num_cpus > CONFIG_MAX_CPUS) { + printk(BIOS_CRIT, + "Error: Hardware CPUs (%d) > MAX_CPUS (%d)\n", + num_cpus, CONFIG_MAX_CPUS); + } + + if (install_relocation_handler(num_cpus, &smm_reloc_params)) { + printk(BIOS_CRIT, "SMM Relocation handler install failed.\n"); + return -1; + } + + if (install_permanent_handler(num_cpus, &smm_reloc_params)) { + printk(BIOS_CRIT, "SMM Permanent handler install failed.\n"); + return -1; + } + + /* Ensure the SMM handlers hit DRAM before performing first SMI. */ + /* TODO(adurbin): Is this really needed? */ + wbinvd(); + + return 0; +} + +void smm_init(void) +{ + /* Return early if CPU SMM setup failed. */ + if (cpu_smm_setup()) + return; + + southbridge_smm_init(); + + /* Initiate first SMI to kick off SMM-context relocation. Note: this + * SMI being triggered here queues up an SMI in the APs which are in + * wait-for-SIPI state. Once an AP gets an SIPI it will service the SMI + * at the SMM_DEFAULT_BASE before jumping to startup vector. */ + southbridge_trigger_smi(); + + printk(BIOS_DEBUG, "Relocation complete.\n"); + + /* Lock down the SMRAM space. */ + smm_lock(); +} + +void smm_lock(void) +{ + /* LOCK the SMM memory window and enable normal SMM. + * After running this function, only a full reset can + * make the SMM registers writable again. + */ + printk(BIOS_DEBUG, "Locking SMM.\n"); + pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, + D_LCK | G_SMRAME | C_BASE_SEG); +} diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S index 0ff7149d70..ec489ce5f6 100644 --- a/src/cpu/x86/smm/smmrelocate.S +++ b/src/cpu/x86/smm/smmrelocate.S @@ -36,8 +36,6 @@ #include "../../../southbridge/intel/i82801dx/i82801dx.h" #elif CONFIG_SOUTHBRIDGE_INTEL_SCH #include "../../../southbridge/intel/sch/sch.h" -#elif CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X -#include "../../../southbridge/intel/fsp_bd82x6x/pch.h" #elif CONFIG_SOUTHBRIDGE_INTEL_I82801IX #include "../../../southbridge/intel/i82801ix/i82801ix.h" #else @@ -45,15 +43,7 @@ #endif #if CONFIG_SMM_TSEG - -#if CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE || CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE -#include -#define TSEG_BAR (DEFAULT_PCIEXBAR | TSEG) -#else -#error "Northbridge must define TSEG_BAR." -#endif - -#include +#error "Don't use this file with TSEG." #endif /* CONFIG_SMM_TSEG */ -- cgit v1.2.3