From 6fcc961fe846aca897480bb637142d50914a4ea7 Mon Sep 17 00:00:00 2001 From: Xavi Drudis Ferran Date: Mon, 28 Feb 2011 00:31:24 +0000 Subject: Improving BKDG implementation of P-states, CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Configuration of F3x[84:80] was hardcoded for rev B. I change that for some code that checks for revision and configures according to BKDG. Unfinished but hopefully better than it was. Signed-off-by: Xavi Drudis Ferran Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_10xxx/fidvid.c | 58 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 53 insertions(+), 5 deletions(-) (limited to 'src/cpu') diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index 37ae426c2e..ea10269c0c 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -343,11 +343,59 @@ static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) { pci_write_config32(dev, 0xdc, dword); } -static void config_acpi_pwr_state_ctrl_regs(device_t dev) { - /* Rev B settings - FIXME: support other revs. */ - u32 dword = 0xA0E641E6; +static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg) { + /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */ + u32 dword; + u32 c1= 1; + if (cpuRev & (AMD_DR_Bx)) { + // will coreboot ever enable cache scrubbing ? + // if it does, will it be enough to check the current state + // or should we configure for what we'll set up later ? + dword = pci_read_config32(dev, 0x58); + u32 scrubbingCache = dword & + ( (0x1F << 16) // DCacheScrub + | (0x1F << 8) ); // L2Scrub + if (scrubbingCache) { + c1 = 0x80; + } else { + c1 = 0xA0; + } + } else { // rev C or later + // same doubt as cache scrubbing: ok to check current state ? + dword = pci_read_config32(dev, 0xDC); + u32 cacheFlushOnHalt = dword & (7 << 16); + if (!cacheFlushOnHalt) { + c1 = 0x80; + } + } + dword = (c1 << 24) | (0xE641E6); pci_write_config32(dev, 0x84, dword); - dword = 0xE600A681; + + + /* FIXME: BKDG Table 100 says if the link is at a Gen1 +frequency and the chipset does not support a 10us minimum LDTSTOP +assertion time, then { If ASB2 && SVI then smaf001 = F6h else +smaf001=87h. } else ... I hardly know what it means or how to check +it from here, so I bluntly assume it is false and code here the else, +which is easier */ + + u32 smaf001 = 0xE6; + if (cpuRev & AMD_DR_Bx ) { + smaf001 = 0xA6; + } else { + #if CONFIG_SVI_HIGH_FREQ + if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) { + smaf001 = 0xF6; + } + #endif + } + u32 fidvidChange = 0; + if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX)) + || (cpuRev & AMD_RB_C3) ) { + fidvidChange=0x0B; + } + dword = (0xE6 << 24) | (fidvidChange << 16) + | (smaf001 << 8) | 0x81; pci_write_config32(dev, 0x80, dword); } @@ -378,7 +426,7 @@ static void prep_fid_change(void) config_power_ctrl_misc_reg(dev,cpuRev,procPkg); config_nb_syn_ptr_adj(dev,cpuRev); - config_acpi_pwr_state_ctrl_regs(dev); + config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg); dword = pci_read_config32(dev, 0x80); printk(BIOS_DEBUG, " F3x80: %08x \n", dword); -- cgit v1.2.3