From 1f4fffb9ccaa3d145b66ddc3e57109cfe8f9fef7 Mon Sep 17 00:00:00 2001 From: Xavi Drudis Ferran Date: Mon, 28 Feb 2011 00:00:51 +0000 Subject: Prepare for next patches (Improving BKDG implementation of P-states, CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode). No change of behaviour intended. Refactor FAM10 fidvid . Factor out the decision whether to update northbridge frequency and voltage because there was the same code in 3 places and so we can later modify it in one place. Signed-off-by: Xavi Drudis Ferran Acked-by: Marc Jones git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_10xxx/fidvid.c | 57 ++++++++++------------------------------ 1 file changed, 14 insertions(+), 43 deletions(-) (limited to 'src/cpu') diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c index 90fa07a986..0a2220fa0c 100644 --- a/src/cpu/amd/model_10xxx/fidvid.c +++ b/src/cpu/amd/model_10xxx/fidvid.c @@ -280,7 +280,6 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev) { pci_write_config32(dev, 0x84, dword); dword = 0xE600A681; pci_write_config32(dev, 0x80, dword); - } static void prep_fid_change(void) @@ -522,24 +521,19 @@ static u32 needs_NB_COF_VID_update(void) return nb_cof_vid_update; } -static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) +static u32 init_fidvid_core(u32 nodeid, u32 coreid) { device_t dev; u32 vid_max; - u32 fid_max; + u32 fid_max=0; u8 nb_cof_vid_update = needs_NB_COF_VID_update(); u8 pvimode; u32 reg1fc; - u32 send; - - printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid); /* Steps 1-6 of BIOS NB COF and VID Configuration * for SVI and Single-Plane PVI Systems. */ - - dev = NODE_PCI(nodeid, 3); pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; reg1fc = pci_read_config32(dev, 0x1FC); @@ -565,7 +559,17 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) UpdateSinglePlaneNbVid(); } - send = (nb_cof_vid_update << 16) | (fid_max << 8); + return ((nb_cof_vid_update << 16) | (fid_max << 8)); + +} + +static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid) +{ + u32 send; + + printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid); + + send = init_fidvid_core(nodeid,coreid); send |= (apicid << 24); // ap apicid // Send signal to BSP about this AP max fid @@ -783,48 +787,15 @@ static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes) u32 i; #endif struct fidvid_st fv; - device_t dev; - u32 vid_max; - u32 fid_max=0; - u8 nb_cof_vid_update = needs_NB_COF_VID_update(); - u32 reg1fc; - u8 pvimode; printk(BIOS_DEBUG, "FIDVID on BSP, APIC_id: %02x\n", bsp_apicid); - /* FIXME: The first half of this function is nearly the same as - * init_fidvid_bsp() and the code could be combined. - */ /* Steps 1-6 of BIOS NB COF and VID Configuration * for SVI and Single-Plane PVI Systems. */ - dev = NODE_PCI(0, 3); - pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1; - reg1fc = pci_read_config32(dev, 0x1FC); - - if (nb_cof_vid_update) { - if (pvimode) { - vid_max = (reg1fc >> 7) & 0x7F; - fid_max = (reg1fc >> 2) & 0x1F; - - /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */ - fixPsNbVidBeforeWR(vid_max, 0); - } else { /* SVI */ - vid_max = ((reg1fc >> 7) & 0x7F) - ((reg1fc >> 17) & 0x1F); - fid_max = ((reg1fc >> 2) & 0x1F) + ((reg1fc >> 14) & 0x7); - transitionVid(vid_max, dev, IS_NB); - } - - /* fid setup is handled by the BSP at the end. */ - - } else { /* ! nb_cof_vid_update */ - /* Use max values */ - if (pvimode) - UpdateSinglePlaneNbVid(); - } + fv.common_fid = init_fidvid_core(0,0); - fv.common_fid = (nb_cof_vid_update << 16) | (fid_max << 8); print_debug_fv("BSP fid = ", fv.common_fid); #if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST && !CONFIG_SET_FIDVID_CORE0_ONLY -- cgit v1.2.3