From d4c5c44d276b57ca87aadb22c1f918c4912e264f Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Sat, 20 Feb 2010 09:38:16 +0000 Subject: trival. All the changes is about comment and spaces. 1. Delete trailing white spaces. 2. Change the // comment to /* */. 3. Add some copyright header. 4. reindent. 5. delete multi blank lines. Signed-off-by: Zheng Bao Acked-by: Zheng Bao git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5133 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/x86/lapic/lapic_cpu_init.c | 72 +++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 36 deletions(-) (limited to 'src/cpu/x86/lapic') diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c index b27fb2c70f..2e938eeaaf 100644 --- a/src/cpu/x86/lapic/lapic_cpu_init.c +++ b/src/cpu/x86/lapic/lapic_cpu_init.c @@ -19,15 +19,15 @@ #if CONFIG_RAMBASE >= 0x100000 /* This is a lot more paranoid now, since Linux can NOT handle - * being told there is a CPU when none exists. So any errors - * will return 0, meaning no CPU. + * being told there is a CPU when none exists. So any errors + * will return 0, meaning no CPU. * * We actually handling that case by noting which cpus startup * and not telling anyone about the ones that dont. - */ + */ static unsigned long get_valid_start_eip(unsigned long orig_start_eip) { - return (unsigned long)orig_start_eip & 0xffff; // 16 bit to avoid 0xa0000 + return (unsigned long)orig_start_eip & 0xffff; // 16 bit to avoid 0xa0000 } #endif @@ -39,34 +39,34 @@ int lowmem_backup_size; extern char _secondary_start[]; -static void copy_secondary_start_to_1m_below(void) +static void copy_secondary_start_to_1m_below(void) { #if CONFIG_RAMBASE >= 0x100000 - extern char _secondary_start_end[]; - unsigned long code_size; - unsigned long start_eip; + extern char _secondary_start_end[]; + unsigned long code_size; + unsigned long start_eip; - /* _secondary_start need to be masked 20 above bit, because 16 bit code in secondary.S - Also We need to copy the _secondary_start to the below 1M region - */ - start_eip = get_valid_start_eip((unsigned long)_secondary_start); - code_size = (unsigned long)_secondary_start_end - (unsigned long)_secondary_start; + /* _secondary_start need to be masked 20 above bit, because 16 bit code in secondary.S + Also We need to copy the _secondary_start to the below 1M region + */ + start_eip = get_valid_start_eip((unsigned long)_secondary_start); + code_size = (unsigned long)_secondary_start_end - (unsigned long)_secondary_start; #if CONFIG_HAVE_ACPI_RESUME == 1 /* need to save it for RAM resume */ lowmem_backup_size = code_size; lowmem_backup = malloc(code_size); lowmem_backup_ptr = (char *)start_eip; - + if (lowmem_backup == NULL) die("Out of backup memory\n"); - memcpy(lowmem_backup, lowmem_backup_ptr, lowmem_backup_size); + memcpy(lowmem_backup, lowmem_backup_ptr, lowmem_backup_size); #endif - /* copy the _secondary_start to the ram below 1M*/ - memcpy((unsigned char *)start_eip, (unsigned char *)_secondary_start, code_size); + /* copy the _secondary_start to the ram below 1M*/ + memcpy((unsigned char *)start_eip, (unsigned char *)_secondary_start, code_size); - printk_debug("start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); + printk_debug("start_eip=0x%08lx, offset=0x%08lx, code_size=0x%08lx\n", start_eip, ((unsigned long)_secondary_start - start_eip), code_size); #endif } @@ -75,7 +75,7 @@ static int lapic_start_cpu(unsigned long apicid) int timeout; unsigned long send_status, accept_status, start_eip; int j, num_starts, maxlvt; - + /* * Starting actual IPI sequence... */ @@ -90,7 +90,7 @@ static int lapic_start_cpu(unsigned long apicid) /* * Send IPI */ - + lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_INT_ASSERT | LAPIC_DM_INIT); @@ -104,7 +104,7 @@ static int lapic_start_cpu(unsigned long apicid) if (timeout >= 1000) { printk_err("CPU %ld: First apic write timed out. Disabling\n", apicid); - // too bad. + // too bad. printk_err("ESR is 0x%lx\n", lapic_read(LAPIC_ESR)); if (lapic_read(LAPIC_ESR)) { printk_err("Try to reset ESR\n"); @@ -122,7 +122,7 @@ static int lapic_start_cpu(unsigned long apicid) /* Send IPI */ lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); - + printk_spew("Waiting for send to finish...\n"); timeout = 0; do { @@ -133,7 +133,7 @@ static int lapic_start_cpu(unsigned long apicid) if (timeout >= 1000) { printk_err("CPU %ld: Second apic write timed out. Disabling\n", apicid); - // too bad. + // too bad. return 0; } @@ -244,10 +244,10 @@ int start_cpu(device_t cpu) /* Get an index for the new processor */ index = ++last_cpu_index; - + /* Find end of the new processors stack */ #if (CONFIG_RAMTOP>0x100000) && (CONFIG_RAMBASE < 0x100000) && ((CONFIG_CONSOLE_VGA==1) || (CONFIG_PCI_ROM_RUN == 1)) - if(index<1) { // only keep bsp on low + if(index<1) { // only keep bsp on low stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info); } else { // for all APs, let use stack after pgtbl, 20480 is the pgtbl size for every cpu @@ -265,7 +265,7 @@ int start_cpu(device_t cpu) stack_end = ((unsigned long)_estack) - (CONFIG_STACK_SIZE*index) - sizeof(struct cpu_info); #endif - + /* Record the index and which cpu structure we are using */ info = (struct cpu_info *)stack_end; info->index = index; @@ -339,7 +339,7 @@ void stop_this_cpu(void) printk_spew("Deasserting INIT.\n"); /* Deassert the LAPIC INIT */ - lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); + lapic_write_around(LAPIC_ICR2, SET_LAPIC_DEST_FIELD(id)); lapic_write_around(LAPIC_ICR, LAPIC_INT_LEVELTRIG | LAPIC_DM_INIT); printk_spew("Waiting for send to finish...\n"); @@ -391,7 +391,7 @@ static void start_other_cpus(struct bus *cpu_bus, device_t bsp_cpu) } #if CONFIG_SERIAL_CPU_INIT == 0 if(cpu==bsp_cpu) { - continue; + continue; } #endif @@ -437,7 +437,7 @@ static void wait_other_cpus_stop(struct bus *cpu_bus) continue; } if (!cpu->initialized) { - printk_err("CPU 0x%02x did not initialize!\n", + printk_err("CPU 0x%02x did not initialize!\n", cpu->path.apic.apic_id); } } @@ -480,22 +480,22 @@ void initialize_cpus(struct bus *cpu_bus) smm_init(); #endif - cpus_ready_for_init(); + cpus_ready_for_init(); #if CONFIG_SMP == 1 #if CONFIG_SERIAL_CPU_INIT == 0 /* start all aps at first, so we can init ECC all together */ - start_other_cpus(cpu_bus, info->cpu); + start_other_cpus(cpu_bus, info->cpu); #endif #endif - /* Initialize the bootstrap processor */ - cpu_initialize(); + /* Initialize the bootstrap processor */ + cpu_initialize(); #if CONFIG_SMP == 1 - #if CONFIG_SERIAL_CPU_INIT == 1 - start_other_cpus(cpu_bus, info->cpu); - #endif + #if CONFIG_SERIAL_CPU_INIT == 1 + start_other_cpus(cpu_bus, info->cpu); + #endif /* Now wait the rest of the cpus stop*/ wait_other_cpus_stop(cpu_bus); -- cgit v1.2.3