From fe6406033fe327d4ae408b02efc060b4b421bc03 Mon Sep 17 00:00:00 2001 From: Gabe Black Date: Sat, 15 Jun 2013 20:33:05 -0700 Subject: exynos5250: De-switch-ify the pinmux configuration code. The pinmux code for the exynos5250 was all bundled into a single, large function which contained a switch statement that would set up the pins for different peripherals within the SOC. There was also a "flags" parameter, the meaning of which, if any, depended on which peripheral was being set up. There are several problems with that approach. First, the code is inefficient in both time and space. The caller knows which peripheral it wants to set up, but that information is encoded in a constant which has to be unpacked within the function before any action can be taken. If there were a function per peripheral, that information would be implicit. Also, the compiler and linker are forced to include the entire function with all its cases even if most of them are never called. If each peripheral was a function, the unused ones could be garbage collected. Second, it would be possible to try to set up a peripheral which that function doesn't know about, so there has to be additional error checking/handling. If each peripheral had a function, the fact that there was a function to call at all would imply that the call would be understood. Third, the flags parameter is fairly opaque, usually doesn't do anything, and sometimes has to have multiple values embedded in it. By having separate functions, you can have only the parameters you actually want, give them names that make sense, and pass in values directly. Fourth, having one giant function pretends to be a generic, portable API, but in reality, the only way it's useful is to call it with constants which are specific to a particular implementation of that API. It's highly unlikely that a bit of code will need to set up a peripheral but have no idea what that peripheral actually is. Call sights for the prior pinmux API have been updated. Also, pinmux initialization within the i2c driver was moved to be in the board setup code where it really probably belongs. The function block that implements the I2C controller may be shared between multiple SOCs (and in fact is), and those SOCs may have different pinmuxes (which they do). Other places this same sort of change can be made are the pinmux code for the 5420, and the clock configuration code for both the 5250 and the 5420. Change-Id: Ie9133a895e0dd861cb06a6d5f995b8770b6dc8cf Signed-off-by: Gabe Black Reviewed-on: http://review.coreboot.org/3673 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/cpu/samsung/exynos5250/clock.c | 1 + src/cpu/samsung/exynos5250/i2c.c | 2 - src/cpu/samsung/exynos5250/pinmux.c | 489 ++++++++++++++++-------------------- src/cpu/samsung/exynos5250/pinmux.h | 64 ++--- src/cpu/samsung/exynos5250/uart.c | 3 +- 5 files changed, 258 insertions(+), 301 deletions(-) (limited to 'src/cpu/samsung') diff --git a/src/cpu/samsung/exynos5250/clock.c b/src/cpu/samsung/exynos5250/clock.c index 64302f0b25..78f0bd434d 100644 --- a/src/cpu/samsung/exynos5250/clock.c +++ b/src/cpu/samsung/exynos5250/clock.c @@ -24,6 +24,7 @@ #include "timer.h" #include "clk.h" #include "cpu.h" +#include "periph.h" /* input clock of PLL: SMDK5250 has 24MHz input clock */ #define CONFIG_SYS_CLK_FREQ 24000000 diff --git a/src/cpu/samsung/exynos5250/i2c.c b/src/cpu/samsung/exynos5250/i2c.c index 98eb64106e..723cee6ce1 100644 --- a/src/cpu/samsung/exynos5250/i2c.c +++ b/src/cpu/samsung/exynos5250/i2c.c @@ -24,7 +24,6 @@ #include #include "clk.h" #include "i2c.h" -#include "pinmux.h" #define I2C_WRITE 0 #define I2C_READ 1 @@ -157,7 +156,6 @@ static void i2c_ch_init(struct s3c24x0_i2c_bus *bus, int speed, int slaveadd) */ static void i2c_bus_init(struct s3c24x0_i2c_bus *bus, int speed, int slaveadd) { - exynos_pinmux_config(bus->periph_id, 0); i2c_ch_init(bus, speed, slaveadd); } diff --git a/src/cpu/samsung/exynos5250/pinmux.c b/src/cpu/samsung/exynos5250/pinmux.c index 9a473d0b2a..1c72353aa1 100644 --- a/src/cpu/samsung/exynos5250/pinmux.c +++ b/src/cpu/samsung/exynos5250/pinmux.c @@ -23,278 +23,233 @@ #include "cpu.h" #include "pinmux.h" -int exynos_pinmux_config(enum periph_id peripheral, int flags) +static void exynos_pinmux_uart(int start, int count) { - int i, start, count, start_ext, pin_ext, pin, drv; - - switch (peripheral) { - case PERIPH_ID_UART0: - case PERIPH_ID_UART1: - case PERIPH_ID_UART2: - case PERIPH_ID_UART3: - switch (peripheral) { - default: - case PERIPH_ID_UART0: - start = GPIO_A00; count = 4; - break; - case PERIPH_ID_UART1: - start = GPIO_A04; count = 4; - break; - case PERIPH_ID_UART2: - start = GPIO_A10; count = 4; - break; - case PERIPH_ID_UART3: - start = GPIO_A14; count = 2; - break; - } - for (i = start; i < start + count; i++) { - gpio_set_pull(i, GPIO_PULL_NONE); - gpio_cfg_pin(i, GPIO_FUNC(0x2)); - } - break; - case PERIPH_ID_SDMMC0: - case PERIPH_ID_SDMMC1: - case PERIPH_ID_SDMMC2: - case PERIPH_ID_SDMMC3: - pin = GPIO_FUNC(0x2); - pin_ext = GPIO_FUNC(0x2); - drv = GPIO_DRV_4X; - switch (peripheral) { - default: - case PERIPH_ID_SDMMC0: - start = GPIO_C00; - start_ext = GPIO_C10; - break; - case PERIPH_ID_SDMMC1: - start = GPIO_C20; - start_ext = 0; - break; - case PERIPH_ID_SDMMC2: - start = GPIO_C30; - /* - * TODO: (alim.akhtar@samsung.com) - * add support for 8 bit mode (needs to be a per-board - * option, so in the FDT). - */ - start_ext = 0; - break; - case PERIPH_ID_SDMMC3: - /* - * TODO: Need to add defintions for GPC4 before - * enabling this. - */ - printk(BIOS_DEBUG, "SDMMC3 not supported yet"); - return -1; - } - if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) { - printk(BIOS_DEBUG, "SDMMC device %d does not support 8bit mode", - peripheral); - return -1; - } - if (flags & PINMUX_FLAG_8BIT_MODE) { - ASSERT(peripheral == PERIPH_ID_SDMMC0); - for (i = 0; i <= 3; i++) { - gpio_cfg_pin(start_ext + i, pin_ext); - gpio_set_pull(start_ext + i, - GPIO_PULL_UP); - gpio_set_drv(start_ext + i, drv); - } - } - for (i = 0; i < 2; i++) { - gpio_cfg_pin(start + i, pin); - gpio_set_pull(start + i, GPIO_PULL_NONE); - gpio_set_drv(start + i, drv); - } - for (i = 2; i <= 6; i++) { - gpio_cfg_pin(start + i, pin); - gpio_set_pull(start + i, GPIO_PULL_UP); - gpio_set_drv(start + i, drv); - } - break; - case PERIPH_ID_SROMC: - /* - * SROM:CS1 and EBI - * - * GPY0[0] SROM_CSn[0] - * GPY0[1] SROM_CSn[1](2) - * GPY0[2] SROM_CSn[2] - * GPY0[3] SROM_CSn[3] - * GPY0[4] EBI_OEn(2) - * GPY0[5] EBI_EEn(2) - * - * GPY1[0] EBI_BEn[0](2) - * GPY1[1] EBI_BEn[1](2) - * GPY1[2] SROM_WAIT(2) - * GPY1[3] EBI_DATA_RDn(2) - */ - gpio_cfg_pin(GPIO_Y00 + (flags & PINMUX_FLAG_BANK), - GPIO_FUNC(2)); - gpio_cfg_pin(GPIO_Y04, GPIO_FUNC(2)); - gpio_cfg_pin(GPIO_Y05, GPIO_FUNC(2)); - - for (i = 2; i < 4; i++) - gpio_cfg_pin(GPIO_Y10 + i, GPIO_FUNC(2)); - - /* - * EBI: 8 Addrss Lines - * - * GPY3[0] EBI_ADDR[0](2) - * GPY3[1] EBI_ADDR[1](2) - * GPY3[2] EBI_ADDR[2](2) - * GPY3[3] EBI_ADDR[3](2) - * GPY3[4] EBI_ADDR[4](2) - * GPY3[5] EBI_ADDR[5](2) - * GPY3[6] EBI_ADDR[6](2) - * GPY3[7] EBI_ADDR[7](2) - * - * EBI: 16 Data Lines - * - * GPY5[0] EBI_DATA[0](2) - * GPY5[1] EBI_DATA[1](2) - * GPY5[2] EBI_DATA[2](2) - * GPY5[3] EBI_DATA[3](2) - * GPY5[4] EBI_DATA[4](2) - * GPY5[5] EBI_DATA[5](2) - * GPY5[6] EBI_DATA[6](2) - * GPY5[7] EBI_DATA[7](2) - * - * GPY6[0] EBI_DATA[8](2) - * GPY6[1] EBI_DATA[9](2) - * GPY6[2] EBI_DATA[10](2) - * GPY6[3] EBI_DATA[11](2) - * GPY6[4] EBI_DATA[12](2) - * GPY6[5] EBI_DATA[13](2) - * GPY6[6] EBI_DATA[14](2) - * GPY6[7] EBI_DATA[15](2) - */ - for (i = 0; i < 8; i++) { - gpio_cfg_pin(GPIO_Y30 + i, GPIO_FUNC(2)); - gpio_set_pull(GPIO_Y30 + i, GPIO_PULL_UP); - - gpio_cfg_pin(GPIO_Y50 + i, GPIO_FUNC(2)); - gpio_set_pull(GPIO_Y50 + i, GPIO_PULL_UP); - - if (flags & PINMUX_FLAG_16BIT) { - gpio_cfg_pin(GPIO_Y60 + i, GPIO_FUNC(2)); - gpio_set_pull(GPIO_Y60 + i, - GPIO_PULL_UP); - } - } - break; - case PERIPH_ID_SPI0: - case PERIPH_ID_SPI1: - case PERIPH_ID_SPI2: - case PERIPH_ID_SPI3: { - int cfg; - - switch (peripheral) { - default: - case PERIPH_ID_SPI0: - start = GPIO_A20; - cfg = 0x2; - break; - case PERIPH_ID_SPI1: - start = GPIO_A24; - cfg = 0x2; - break; - case PERIPH_ID_SPI2: - start = GPIO_B11; - cfg = 0x5; - break; - case PERIPH_ID_SPI3: - start = GPIO_E00; - cfg = 0x2; - break; + int i; + + for (i = start; i < start + count; i++) { + gpio_set_pull(i, GPIO_PULL_NONE); + gpio_cfg_pin(i, GPIO_FUNC(0x2)); + } +} + +void exynos_pinmux_uart0(void) +{ + exynos_pinmux_uart(GPIO_A00, 4); +} + +void exynos_pinmux_uart1(void) +{ + exynos_pinmux_uart(GPIO_D00, 4); +} + +void exynos_pinmux_uart2(void) +{ + exynos_pinmux_uart(GPIO_A10, 4); +} + +void exynos_pinmux_uart3(void) +{ + exynos_pinmux_uart(GPIO_A14, 2); +} + +static void exynos_pinmux_sdmmc(int start, int start_ext) +{ + int i; + + if (start_ext) { + for (i = 0; i <= 3; i++) { + gpio_cfg_pin(start_ext + i, GPIO_FUNC(0x2)); + gpio_set_pull(start_ext + i, GPIO_PULL_UP); + gpio_set_drv(start_ext + i, GPIO_DRV_4X); } + } + for (i = 0; i < 2; i++) { + gpio_cfg_pin(start + i, GPIO_FUNC(0x2)); + gpio_set_pull(start + i, GPIO_PULL_NONE); + gpio_set_drv(start + i, GPIO_DRV_4X); + } + for (i = 2; i <= 6; i++) { + gpio_cfg_pin(start + i, GPIO_FUNC(0x2)); + gpio_set_pull(start + i, GPIO_PULL_UP); + gpio_set_drv(start + i, GPIO_DRV_4X); + } +} + +void exynos_pinmux_sdmmc0(void) +{ + exynos_pinmux_sdmmc(GPIO_C00, GPIO_C10); +} + +void exynos_pinmux_sdmmc1(void) +{ + exynos_pinmux_sdmmc(GPIO_C20, 0); +} + +void exynos_pinmux_sdmmc2(void) +{ + exynos_pinmux_sdmmc(GPIO_C30, 0); +} + +void exynos_pinmux_sdmmc3(void) +{ + /* + * TODO: Need to add defintions for GPC4 before + * enabling this. + */ + printk(BIOS_DEBUG, "SDMMC3 not supported yet"); +} - for (i = 0; i < 4; i++) - gpio_cfg_pin(start + i, GPIO_FUNC(cfg)); - break; +void exynos_pinmux_sromc(int bank, int sixteen_bit) +{ + int i; + + if (bank > 3) { + printk(BIOS_DEBUG, "Unsupported sromc bank %d.\n", bank); + return; } - case PERIPH_ID_SPI4: - for (i = 0; i < 2; i++) - gpio_cfg_pin(GPIO_F02 + i, GPIO_FUNC(0x4)); - for (i = 2; i < 4; i++) - gpio_cfg_pin(GPIO_E02 + i, GPIO_FUNC(0x4)); - break; - case PERIPH_ID_BACKLIGHT: - gpio_cfg_pin(GPIO_B20, GPIO_OUTPUT); - gpio_set_value(GPIO_B20, 1); - break; - case PERIPH_ID_LCD: - gpio_cfg_pin(GPIO_Y25, GPIO_OUTPUT); - gpio_set_value(GPIO_Y25, 1); - gpio_cfg_pin(GPIO_X15, GPIO_OUTPUT); - gpio_set_value(GPIO_X15, 1); - gpio_cfg_pin(GPIO_X30, GPIO_OUTPUT); - gpio_set_value(GPIO_X30, 1); - break; - case PERIPH_ID_I2C0: - gpio_cfg_pin(GPIO_B30, GPIO_FUNC(0x2)); - gpio_cfg_pin(GPIO_B31, GPIO_FUNC(0x2)); - gpio_set_pull(GPIO_B30, GPIO_PULL_NONE); - gpio_set_pull(GPIO_B31, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C1: - gpio_cfg_pin(GPIO_B32, GPIO_FUNC(0x2)); - gpio_cfg_pin(GPIO_B33, GPIO_FUNC(0x2)); - gpio_set_pull(GPIO_B32, GPIO_PULL_NONE); - gpio_set_pull(GPIO_B33, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C2: - gpio_cfg_pin(GPIO_A06, GPIO_FUNC(0x3)); - gpio_cfg_pin(GPIO_A07, GPIO_FUNC(0x3)); - gpio_set_pull(GPIO_A06, GPIO_PULL_NONE); - gpio_set_pull(GPIO_A07, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C3: - gpio_cfg_pin(GPIO_A12, GPIO_FUNC(0x3)); - gpio_cfg_pin(GPIO_A13, GPIO_FUNC(0x3)); - gpio_set_pull(GPIO_A12, GPIO_PULL_NONE); - gpio_set_pull(GPIO_A13, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C4: - gpio_cfg_pin(GPIO_A20, GPIO_FUNC(0x3)); - gpio_cfg_pin(GPIO_A21, GPIO_FUNC(0x3)); - gpio_set_pull(GPIO_A20, GPIO_PULL_NONE); - gpio_set_pull(GPIO_A21, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C5: - gpio_cfg_pin(GPIO_A22, GPIO_FUNC(0x3)); - gpio_cfg_pin(GPIO_A23, GPIO_FUNC(0x3)); - gpio_set_pull(GPIO_A22, GPIO_PULL_NONE); - gpio_set_pull(GPIO_A23, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2C6: - gpio_cfg_pin(GPIO_B13, GPIO_FUNC(0x4)); - gpio_cfg_pin(GPIO_B14, GPIO_FUNC(0x4)); - break; - case PERIPH_ID_I2C7: - gpio_cfg_pin(GPIO_B22, GPIO_FUNC(0x3)); - gpio_cfg_pin(GPIO_B23, GPIO_FUNC(0x3)); - gpio_set_pull(GPIO_B22, GPIO_PULL_NONE); - gpio_set_pull(GPIO_B23, GPIO_PULL_NONE); - break; - case PERIPH_ID_DPHPD: - /* Set Hotplug detect for DP */ - gpio_cfg_pin(GPIO_X07, GPIO_FUNC(0x3)); - - /* - * Hotplug detect should have an external pullup; disable the - * internal pulldown so they don't fight. - */ - gpio_set_pull(GPIO_X07, GPIO_PULL_NONE); - break; - case PERIPH_ID_I2S1: - for (i = 0; i < 5; i++) { - gpio_cfg_pin(GPIO_B00 + i, GPIO_FUNC(0x02)); - gpio_set_pull(GPIO_B00 + i, GPIO_PULL_NONE); + + gpio_cfg_pin(GPIO_Y00 + bank, GPIO_FUNC(2)); + gpio_cfg_pin(GPIO_Y04, GPIO_FUNC(2)); + gpio_cfg_pin(GPIO_Y05, GPIO_FUNC(2)); + + for (i = 2; i < 4; i++) + gpio_cfg_pin(GPIO_Y10 + i, GPIO_FUNC(2)); + + for (i = 0; i < 8; i++) { + gpio_cfg_pin(GPIO_Y30 + i, GPIO_FUNC(2)); + gpio_set_pull(GPIO_Y30 + i, GPIO_PULL_UP); + + gpio_cfg_pin(GPIO_Y50 + i, GPIO_FUNC(2)); + gpio_set_pull(GPIO_Y50 + i, GPIO_PULL_UP); + + if (sixteen_bit) { + gpio_cfg_pin(GPIO_Y60 + i, GPIO_FUNC(2)); + gpio_set_pull(GPIO_Y60 + i, GPIO_PULL_UP); } - break; - default: - printk(BIOS_DEBUG, "%s: invalid peripheral %d", __func__, peripheral); - return -1; } +} + +static void exynos_pinmux_spi(int start, int cfg) +{ + int i; + + for (i = 0; i < 4; i++) + gpio_cfg_pin(start + i, GPIO_FUNC(cfg)); +} + +void exynos_pinmux_spi0(void) +{ + exynos_pinmux_spi(GPIO_A20, 0x2); +} + +void exynos_pinmux_spi1(void) +{ + exynos_pinmux_spi(GPIO_A24, 0x2); +} + +void exynos_pinmux_spi2(void) +{ + exynos_pinmux_spi(GPIO_B11, 0x5); +} + +void exynos_pinmux_spi3(void) +{ + exynos_pinmux_spi(GPIO_E00, 0x2); +} + +void exynos_pinmux_spi4(void) +{ + int i; + + for (i = 0; i < 2; i++) + gpio_cfg_pin(GPIO_F02 + i, GPIO_FUNC(0x4)); + for (i = 2; i < 4; i++) + gpio_cfg_pin(GPIO_E02 + i, GPIO_FUNC(0x4)); +} + +void exynos_pinmux_backlight(void) +{ + gpio_cfg_pin(GPIO_B20, GPIO_OUTPUT); + gpio_set_value(GPIO_B20, 1); +} + +void exynos_pinmux_lcd(void) +{ + gpio_cfg_pin(GPIO_Y25, GPIO_OUTPUT); + gpio_set_value(GPIO_Y25, 1); + gpio_cfg_pin(GPIO_X15, GPIO_OUTPUT); + gpio_set_value(GPIO_X15, 1); + gpio_cfg_pin(GPIO_X30, GPIO_OUTPUT); + gpio_set_value(GPIO_X30, 1); +} - return 0; +static void exynos_pinmux_i2c(int start, int func) +{ + gpio_cfg_pin(start, GPIO_FUNC(func)); + gpio_cfg_pin(start + 1, GPIO_FUNC(func)); + gpio_set_pull(start, GPIO_PULL_NONE); + gpio_set_pull(start + 1, GPIO_PULL_NONE); +} + +void exynos_pinmux_i2c0(void) +{ + exynos_pinmux_i2c(GPIO_B30, 0x2); +} + +void exynos_pinmux_i2c1(void) +{ + exynos_pinmux_i2c(GPIO_B32, 0x2); +} + +void exynos_pinmux_i2c2(void) +{ + exynos_pinmux_i2c(GPIO_A06, 0x3); +} + +void exynos_pinmux_i2c3(void) +{ + exynos_pinmux_i2c(GPIO_A12, 0x3); +} + +void exynos_pinmux_i2c4(void) +{ + exynos_pinmux_i2c(GPIO_A20, 0x3); +} + +void exynos_pinmux_i2c5(void) +{ + exynos_pinmux_i2c(GPIO_A22, 0x3); +} + +void exynos_pinmux_i2c6(void) +{ + exynos_pinmux_i2c(GPIO_B13, 0x4); +} + +void exynos_pinmux_i2c7(void) +{ + exynos_pinmux_i2c(GPIO_B22, 0x3); +} + +void exynos_pinmux_dphpd(void) +{ + /* Set Hotplug detect for DP */ + gpio_cfg_pin(GPIO_X07, GPIO_FUNC(0x3)); + + /* + * Hotplug detect should have an external pullup; disable the + * internal pulldown so they don't fight. + */ + gpio_set_pull(GPIO_X07, GPIO_PULL_NONE); +} + +void exynos_pinmux_i2s1(void) +{ + int i; + + for (i = 0; i < 5; i++) { + gpio_cfg_pin(GPIO_B00 + i, GPIO_FUNC(0x02)); + gpio_set_pull(GPIO_B00 + i, GPIO_PULL_NONE); + } } diff --git a/src/cpu/samsung/exynos5250/pinmux.h b/src/cpu/samsung/exynos5250/pinmux.h index bf6a081ccc..e5cf6991bf 100644 --- a/src/cpu/samsung/exynos5250/pinmux.h +++ b/src/cpu/samsung/exynos5250/pinmux.h @@ -20,36 +20,38 @@ #ifndef CPU_SAMSUNG_EXYNOS5250_PINMUX_H #define CPU_SAMSUNG_EXYNOS5250_PINMUX_H -#include "periph.h" - -enum { - PINMUX_FLAG_NONE = 0x00000000, - - /* Flags for eMMC */ - PINMUX_FLAG_8BIT_MODE = 1 << 0, /* SDMMC 8-bit mode */ - - /* - * Flags for SPI. - */ - PINMUX_FLAG_SLAVE_MODE = 1 << 0, /* Slave mode */ - - /* Flags for SROM controller */ - PINMUX_FLAG_BANK = 3 << 0, /* bank number (0-3) */ - PINMUX_FLAG_16BIT = 1 << 2, /* 16-bit width */ -}; - -/** - * Configures the pinmux for a particular peripheral. - * - * Each gpio can be configured in many different ways (4 bits on exynos) - * such as "input", "output", "special function", "external interrupt" - * etc. This function will configure the peripheral pinmux along with - * pull-up/down and drive strength. - * - * @param peripheral peripheral to be configured - * @param flags configure flags - * @return 0 if ok, -1 on error (e.g. unsupported peripheral) - */ -int exynos_pinmux_config(enum periph_id peripheral, int flags); +void exynos_pinmux_uart0(void); +void exynos_pinmux_uart1(void); +void exynos_pinmux_uart2(void); +void exynos_pinmux_uart3(void); + +void exynos_pinmux_sdmmc0(void); +void exynos_pinmux_sdmmc1(void); +void exynos_pinmux_sdmmc2(void); +void exynos_pinmux_sdmmc3(void); + +void exynos_pinmux_sromc(int bank, int sixteen_bit); + +void exynos_pinmux_spi0(void); +void exynos_pinmux_spi1(void); +void exynos_pinmux_spi2(void); +void exynos_pinmux_spi3(void); +void exynos_pinmux_spi4(void); + +void exynos_pinmux_backlight(void); +void exynos_pinmux_lcd(void); + +void exynos_pinmux_i2c0(void); +void exynos_pinmux_i2c1(void); +void exynos_pinmux_i2c2(void); +void exynos_pinmux_i2c3(void); +void exynos_pinmux_i2c4(void); +void exynos_pinmux_i2c5(void); +void exynos_pinmux_i2c6(void); +void exynos_pinmux_i2c7(void); + +void exynos_pinmux_dphpd(void); + +void exynos_pinmux_i2s1(void); #endif diff --git a/src/cpu/samsung/exynos5250/uart.c b/src/cpu/samsung/exynos5250/uart.c index 319e495341..24812ae64f 100644 --- a/src/cpu/samsung/exynos5250/uart.c +++ b/src/cpu/samsung/exynos5250/uart.c @@ -23,6 +23,7 @@ #include "uart.h" #include "clk.h" #include "cpu.h" +#include "periph.h" #define RX_FIFO_COUNT_MASK 0xff #define RX_FIFO_FULL_MASK (1 << 8) @@ -93,7 +94,7 @@ static void exynos5_init_dev(void) struct s5p_uart *uart = (struct s5p_uart *)base_port; // TODO initialize with correct peripheral id by base_port. - exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE); + exynos_pinmux_uart3(); /* enable FIFOs */ writel(0x1, &uart->ufcon); -- cgit v1.2.3