From f7dd98995581302666c09c6c437bbe3e61ad6a2c Mon Sep 17 00:00:00 2001 From: Greg Watson Date: Thu, 24 Jul 2003 21:03:45 +0000 Subject: *** empty log message *** git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1030 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/ppc/mpc74xx/Config.lb | 5 ++ src/cpu/ppc/mpc74xx/mpc74xx.inc | 190 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 195 insertions(+) create mode 100644 src/cpu/ppc/mpc74xx/Config.lb create mode 100644 src/cpu/ppc/mpc74xx/mpc74xx.inc (limited to 'src/cpu/ppc/mpc74xx') diff --git a/src/cpu/ppc/mpc74xx/Config.lb b/src/cpu/ppc/mpc74xx/Config.lb new file mode 100644 index 0000000000..cc36160bbd --- /dev/null +++ b/src/cpu/ppc/mpc74xx/Config.lb @@ -0,0 +1,5 @@ +## +## CPU initialization +## +initinclude "EARLY_INIT" ppc/mpc74xx/mpc74xx.inc + diff --git a/src/cpu/ppc/mpc74xx/mpc74xx.inc b/src/cpu/ppc/mpc74xx/mpc74xx.inc new file mode 100644 index 0000000000..6d23c3ad7e --- /dev/null +++ b/src/cpu/ppc/mpc74xx/mpc74xx.inc @@ -0,0 +1,190 @@ +/* Copyright 2000 AG Electronics Ltd. */ +/* This code is distributed without warranty under the GPL v2 (see COPYING) */ + +/* + * The aim of this code is to bring the machine from power-on to the point + * where we can jump to the the main LinuxBIOS entry point hardwaremain() + * which is written in C. + * + * At power-on, we have no RAM, a memory-mapped I/O space, and we are executing + * out of ROM, generally at 0xfff00100. + * + * Before we jump to harwaremain() we want to do the following: + * + * - enable L1 I/D caches, otherwise performance will be slow + * - set up DBATs for the following regions: + * - RAM (generally 0x00000000 - 0x7fffffff) + * - ROM (_ROMBASE - _ROMBASE + 16Mb) + * - I/O (generally 0xfc000000 - 0xfdffffff) + * - the main purpose for setting up the DBATs is so the I/O region + * can be marked cache inhibited/write through + * - set up IBATs for RAM and ROM + * + */ + +#define BSP_IOREGION1 0x80000000 +#define BSP_IOMASK1 BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER +#define BSP_IOREGION2 0xFD000000 +#define BSP_IOMASK2 BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + + isync + + /* + * Disable dcache and MMU, so we're in a known state + */ + li r0, 0 + sync + mtspr HID0, r0 + sync + mtmsr r0 + isync + + /* + * Invalidate D & I BATS + */ + mtibatu 0, r0 + mtibatu 1, r0 + mtibatu 2, r0 + mtibatu 3, r0 + isync + mtdbatu 0, r0 + mtdbatu 1, r0 + mtdbatu 2, r0 + mtdbatu 3, r0 + isync + + /* + * Clear segment registers (LinuxBIOS doesn't use these) + */ + mtsr 0, r0 + isync + mtsr 1, r0 + isync + mtsr 2, r0 + isync + mtsr 3, r0 + isync + mtsr 4, r0 + isync + mtsr 5, r0 + isync + mtsr 6, r0 + isync + mtsr 7, r0 + isync + mtsr 8, r0 + isync + mtsr 9, r0 + isync + mtsr 10, r0 + isync + mtsr 11, r0 + isync + mtsr 12, r0 + isync + mtsr 13, r0 + isync + mtsr 14, r0 + isync + mtsr 15, r0 + isync + + /* + * Initialize northbridge. This has to happen early because it + * resets memory. Memory is on at this point, albeit with + * pessimistic settings. We reconfigure later using I2C. + */ + bl bsp_init_northbridge + + /* + * Set up DBATs + * + * DBAT0 covers RAM (0 - 256Mb) + * DBAT1 covers PCI memory and ROM (0xFC000000 - 0xFFFFFFFF) + * DBAT1 covers PCI memory (0x80000000 - 0x8FFFFFFF) + */ + lis r2, 0@ha + ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_READ_WRITE + mtdbatu 0, r3 + mtdbatl 0, r2 + isync + + lis r2, BSP_IOREGION2@ha + ori r3, r2, BAT_BL_64M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE + mtdbatu 1, r3 + mtdbatl 1, r2 + isync + + lis r2, BSP_IOREGION1@h + ori r3, r2, BSP_IOMASK1 + ori r2, r2, BAT_CACHE_INHIBITED | BAT_GUARDED | BAT_READ_WRITE + mtdbatu 2, r3 + mtdbatl 2, r2 + isync + + /* + * IBATS + * + * IBAT0 covers RAM (0 - 256Mb) + * IBAT1 covers ROM (_ROMBASE - _ROMBASE+16M) + */ + lis r2, 0@ha + ori r3, r2, BAT_BL_256M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_READ_WRITE + mtibatu 0, r3 + mtibatl 0, r2 + isync + + lis r2, _ROMBASE@ha + ori r3, r2, BAT_BL_16M | BAT_VALID_SUPERVISOR | BAT_VALID_USER + ori r2, r2, BAT_READ_ONLY + mtibatu 1, r3 + mtibatl 1, r2 + isync + + /* + * Invalidate tlb entries + */ + lis r3, 0 + lis r5, 0x4 + isync +tlblp: + tlbie r3 + sync + addi r3, r3, 0x1000 + cmp 0, 0, r3, r5 + blt tlblp + + sync + + /* + * Enable MMU + */ + mfmsr r2 + ori r2, r2, MSR_DR | MSR_IR + isync + mtmsr r2 + isync + + /* + * Enable L1 dcache + */ + mfspr r2, HID0 + ori r2, r2, HID0_DCE | HID0_DCFI + sync + mtspr HID0, r2 + + /* + * Enable L1 icache + */ + mfspr r2, HID0 + ori r2, r2, HID0_ICE | HID0_ICFI + isync + mtspr HID0, r2 + + /* + * Must branch to start_payload once CPU initialization is completed + */ + b start_payload -- cgit v1.2.3