From 7a27fc558d8ae47abe74d5a958b7a8b81797a3e7 Mon Sep 17 00:00:00 2001 From: Patrick Georgi Date: Mon, 21 Dec 2009 12:32:29 +0000 Subject: Make coreboot load VSA from CBFS on amd/gx2. You have to convert the VSA bios image to ELF using the following commands (assuming i386/32bit binutils, if in doubt, use crossgcc's i386-elf-* tools): objcopy --set-start 0x20 --adjust-vma 0x60000 -I binary -O elf32-i386 -B i386 vsa.binary vsa.o ld -e 0x60020 --section-start .data=0x60000 vsa.o -o vsa.elf Then, after build, use cbfstool coreboot.rom add-stage vsa.elf vsa l to add it to the image. Signed-off-by: Patrick Georgi Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4986 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_gx2/vsmsetup.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) (limited to 'src/cpu/amd') diff --git a/src/cpu/amd/model_gx2/vsmsetup.c b/src/cpu/amd/model_gx2/vsmsetup.c index 251d580691..7fa33fc0c2 100644 --- a/src/cpu/amd/model_gx2/vsmsetup.c +++ b/src/cpu/amd/model_gx2/vsmsetup.c @@ -33,6 +33,7 @@ #include #include #include +#include u32 VSA_vrRead(u16 classIndex); void do_vsmbios(void); @@ -190,18 +191,11 @@ void do_vsmbios(void) /* Clear VSM BIOS data area. */ for (i = 0x400; i < 0x500; i++) *(volatile unsigned char *)i = 0; - /* set up cbfs and find the vsa file -- later */ -/* - init_archive(&archive); - - if (find_file(&archive, "blob/vsa", &file)) - die("FATAL: NO VSA found!\n"); - - if (process_file(&file, (void *)VSA2_BUFFER)) - die("FATAL: Processing /blob/vsa failed\n"); - */ + if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) { + printk_err("do_vsmbios: Failed to load VSA.\n"); + } + buf = VSA2_BUFFER; - buf = (unsigned char *)VSA2_BUFFER; printk_debug("buf[0x20] signature is %x:%x:%x:%x\n", buf[0x20], buf[0x21], buf[0x22], buf[0x23]); /* Check for POST code at start of vsainit.bin. If you don't see it, -- cgit v1.2.3