From fa7efe9f40248f9041671ecdc03634f716841e21 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Sat, 2 Oct 2010 20:33:56 +0000 Subject: AMD SB600 uses a hardcoded USB Debug Port number. It cannot be changed via software according to the datasheet, whereas this is indeed possible on AMD SB700. I tested using the SB700 mechanism on SB600 but it didn't work, so I suspect the datasheet is indeed correct. Thus, don't show the kconfig option for selecting the physical USB port on the AMD SB600 southbridge. Signed-off-by: Uwe Hermann Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5906 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/console/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'src/console') diff --git a/src/console/Kconfig b/src/console/Kconfig index 3b8fb02dca..ac4efa1977 100644 --- a/src/console/Kconfig +++ b/src/console/Kconfig @@ -112,13 +112,13 @@ config USBDEBUG If unsure, say N. -# Note: This option doesn't make sense on Intel ICH southbridges as those -# hardcode the physical USB port to be used as Debug Port to 1. It cannot -# be changed by coreboot. +# Note: This option doesn't make sense on Intel ICH / AMD SB600 southbridges +# as those hardcode the physical USB port to be used as Debug Port to 1. +# It cannot be changed by coreboot. config USBDEBUG_DEFAULT_PORT int "Default USB port to use as Debug Port" default 1 - depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX + depends on USBDEBUG && !SOUTHBRIDGE_INTEL_I82801GX && !SOUTHBRIDGE_AMD_SB600 help This option selects which physical USB port coreboot will try to use as EHCI Debug Port first (valid values are: 1-15). -- cgit v1.2.3