From 30d789bcbd528389749339ff03474543af1d5bf1 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Mon, 31 Mar 2008 20:21:49 +0000 Subject: Fix the NVRAM access functions to work correctly for the upper 128 bytes of NVRAM (if enabled). For most chipsets this means using I/O ports 0x72/0x73, but at least on some VIA chipsets (I tested the VIA VT8237R on actual hardware) these ports won't work and you have to use 0x74/0x75. Thus, make this a Kconfig option for now. Signed-off-by: Uwe Hermann Acked-by: Jordan Crouse git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3202 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- payloads/libpayload/drivers/nvram.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) (limited to 'payloads/libpayload/drivers/nvram.c') diff --git a/payloads/libpayload/drivers/nvram.c b/payloads/libpayload/drivers/nvram.c index 3789c09b3c..9196d80b86 100644 --- a/payloads/libpayload/drivers/nvram.c +++ b/payloads/libpayload/drivers/nvram.c @@ -42,7 +42,29 @@ #include -#define RTC_PORT 0x70 + +/** + * PCs can have either 64 (very old ones), 128, or 256 bytes of CMOS RAM. + * + * Usually you access the lower 128 CMOS bytes via I/O port 0x70/0x71. + * For more recent chipsets with 256 bytes, you have to access the upper + * 128 bytes (128-255) using two different registers, usually 0x72/0x73. + * + * On some chipsets this can be different, though. The VIA VT8237R for example + * only recognizes the ports 0x74/0x75 for accessing the high 128 CMOS bytes + * (as seems to be the case for multiple VIA chipsets). + * + * It's very chipset-specific if and how the upper 128 bytes are enabled at + * all, but this work should be done in coreboot anyway. Libpayload assumes + * that coreboot has properly enabled access to the upper 128 bytes and + * doesn't try to do this on its own. + */ +#define RTC_PORT_STANDARD 0x70 +#ifdef CONFIG_RTC_PORT_EXTENDED_VIA +#define RTC_PORT_EXTENDED 0x74 +#else +#define RTC_PORT_EXTENDED 0x72 +#endif /** * Read a byte from the specified NVRAM address. @@ -52,8 +74,10 @@ */ u8 nvram_read(u8 addr) { - outb(addr, RTC_PORT); - return inb(RTC_PORT + 1); + u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED; + + outb(addr, rtc_port); + return inb(rtc_port + 1); } /** @@ -64,6 +88,8 @@ u8 nvram_read(u8 addr) */ void nvram_write(u8 val, u8 addr) { - outb(addr, RTC_PORT); - outb(val, RTC_PORT + 1); + u16 rtc_port = addr < 128 ? RTC_PORT_STANDARD : RTC_PORT_EXTENDED; + + outb(addr, rtc_port); + outb(val, rtc_port + 1); } -- cgit v1.2.3