From 8c4f31b3b5f6c3b7ba0ece39cd7df6273ff70a7e Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Tue, 3 Aug 2010 15:42:29 +0000 Subject: Drop the USE_PRINTK_IN_CAR option. It's a bogus decision to make for any user / board porter: printk should always be available in CAR mode. Also drop CONFIG_USE_INIT, it's only been selected on one ASROCK board but it's not been used there. Very odd. There is one usage of CONFIG_USE_INIT which was always off in src/cpu/intel/car/cache_as_ram.inc and we have to figure out what to do with those few lines. Signed-off-by: Stefan Reinauer Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5682 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- documentation/LinuxBIOS-AMD64.tex | 43 --------------------------------------- 1 file changed, 43 deletions(-) (limited to 'documentation') diff --git a/documentation/LinuxBIOS-AMD64.tex b/documentation/LinuxBIOS-AMD64.tex index 2ee057e42c..19a6f59011 100644 --- a/documentation/LinuxBIOS-AMD64.tex +++ b/documentation/LinuxBIOS-AMD64.tex @@ -1533,14 +1533,6 @@ There are two big additions to the build process and, furthermore, more than two Set to \texttt{1} to use Cache As Ram (CAR). Defaults to \texttt{0} -\item \begin{verbatim}CONFIG_USE_INIT\end{verbatim} - -Set to \texttt{1} to figure this out. Defaults to \texttt{0} - -\item \begin{verbatim}CONFIG_USE_PRINTK_IN_CAR\end{verbatim} - -Set to \texttt{1} to use printk, instead of the primitive print functions, in CAR. Defaults to \texttt{0} - \end{itemize} Before going over the new image types, derived from v3, we will quickly review the standard v2 image types. We are hoping this review will @@ -1646,41 +1638,6 @@ There is a make variable, INIT-OBJECTS, that for all our other targets is empty. No significant change from romcc code. \subsubsection{boot sequence} No significant change from romcc code, except that the CAR code has to set up a stack. -\subsection{car + CONFIG\_USE\_PRINTK\_IN\_CAR images} -When CONFIG\_USE\_PRINTK\_IN\_CAR is set, the CAR code can use printk instead of the primitive print functions. This config variable is used in one of two ways. If CONFIG\_USE\_INIT is 0, then different .c files just include other .c files, as in console.c: -\begin{verbatim} -#if CONFIG_USE_PRINTK_IN_CAR == 0 -static void __console_tx_byte(unsigned char byte) -{ - uart_tx_byte(byte); -} - -#include "console_print.c" - -#else -/* CONFIG_USE_PRINTK_IN_CAR == 1 */ - -#include "console_printk.c" - -#if CONFIG_USE_INIT == 0 -// do_printk -#include "../../../console/vtxprintf.c" -#include "printk_init.c" -#endif - -#endif /* CONFIG_USE_PRINTK_IN_CAR */ - -\end{verbatim}\footnote{yuck!} - -If CONFIG\_USE\_INIT is 1, then the Config.lb is configured differently: -\begin{verbatim} -if CONFIG_USE_INIT - if CONFIG_USE_PRINTK_IN_CAR - initobject printk_init.o - end -end - -\end{verbatim}\footnote{see previous footnote} \subsubsection{layout} No significant change from romcc code. -- cgit v1.2.3