From b12caef23bc1b29c2e658f2b728cc4beac1e62b9 Mon Sep 17 00:00:00 2001 From: Arthur Heymans Date: Fri, 4 Nov 2022 20:45:18 +0100 Subject: configs: Add 64bit buildtest for prodrive/hermes This configuration also boots on real hardware. Change-Id: Ic62a33f8d8c3fdaa8182e797b2bf6fbed6b55731 Signed-off-by: Arthur Heymans Reviewed-on: https://review.coreboot.org/c/coreboot/+/69236 Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- configs/config.prodrive_hermes.x86_64 | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 configs/config.prodrive_hermes.x86_64 (limited to 'configs') diff --git a/configs/config.prodrive_hermes.x86_64 b/configs/config.prodrive_hermes.x86_64 new file mode 100644 index 0000000000..506f4945a8 --- /dev/null +++ b/configs/config.prodrive_hermes.x86_64 @@ -0,0 +1,17 @@ +# Settings used by Prodrive to build coreboot for the Hermes but with x86_64 enabled +CONFIG_VENDOR_PRODRIVE=y +CONFIG_BOARD_PRODRIVE_HERMES=y +CONFIG_MAINBOARD_SMBIOS_MANUFACTURER="Prodrive Technologies B.V." +CONFIG_POST_IO=y +CONFIG_USE_LEGACY_8254_TIMER=y +CONFIG_HERMES_USES_SPS_FIRMWARE=y +CONFIG_GENERIC_LINEAR_FRAMEBUFFER=y +CONFIG_SMMSTORE=y +CONFIG_SMMSTORE_V2=y +CONFIG_DEFAULT_CONSOLE_LOGLEVEL_3=y +CONFIG_POST_DEVICE_LPC=y +CONFIG_MAINBOARD_SERIAL_NUMBER="N/A" +CONFIG_PCIEXP_SUPPORT_RESIZABLE_BARS=y +CONFIG_PCIEXP_DEFAULT_MAX_RESIZABLE_BAR_BITS=36 +CONFIG_RUN_FSP_GOP=y +CONFIG_USE_EXP_X86_64_SUPPORT=y -- cgit v1.2.3