From b08543a6400db38516c2b424f4838c4cd6b70ca0 Mon Sep 17 00:00:00 2001 From: Evgeny Zinoviev Date: Sun, 22 Mar 2020 19:08:15 +0300 Subject: Doc/mb/lenovo/montevina_series: Use Makefile to generate IFD util/bincfg's Makefile already has target that generates flash descriptor. Use it instead. Change-Id: I1756514e1ab7b64de23a98314d8a32e9258e648c Signed-off-by: Evgeny Zinoviev Reviewed-on: https://review.coreboot.org/c/coreboot/+/39762 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons --- Documentation/mainboard/lenovo/montevina_series.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mainboard/lenovo/montevina_series.md b/Documentation/mainboard/lenovo/montevina_series.md index f3aca04adf..529fec679a 100644 --- a/Documentation/mainboard/lenovo/montevina_series.md +++ b/Documentation/mainboard/lenovo/montevina_series.md @@ -112,9 +112,11 @@ If your flash is not 8 MiB, you need to change values of `flcomp_density1` and Then create the flash descriptor: ```console -$ ./bincfg ifd-x200.spec ifd-x200.set ifd.bin +$ make gen-ifd-x200 ``` +It will be saved to the `flashregion_0_fd.bin` file. + #### Configuring coreboot Now configure coreboot. You need to select correct chip size and specify paths @@ -127,7 +129,7 @@ Mainboard ---> Chipset ---> [*] Add Intel descriptor.bin file - # Note: if you used bincfg, specify path to generated util/bincfg/ifd.bin + # Note: if you used bincfg, specify path to generated util/bincfg/flashregion_0_fd.bin (/path/to/flashregion_0_flashdescriptor.bin) Path and filename of the descriptor.bin file [*] Add gigabit ethernet configuration -- cgit v1.2.3