From 2119d0ba4345a19b9db7dc13e36f3fa57f75d234 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Sun, 16 Feb 2020 10:01:33 +0100 Subject: treewide: Capitalize 'CMOS' Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952 Signed-off-by: Elyes HAOUAS Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928 Reviewed-by: Patrick Georgi Reviewed-by: Peter Lemenkov Tested-by: build bot (Jenkins) --- Documentation/mainboard/msi/ms7707/ms7707.md | 2 +- Documentation/releases/coreboot-4.6-relnotes.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mainboard/msi/ms7707/ms7707.md b/Documentation/mainboard/msi/ms7707/ms7707.md index 789431872c..c27ff60142 100644 --- a/Documentation/mainboard/msi/ms7707/ms7707.md +++ b/Documentation/mainboard/msi/ms7707/ms7707.md @@ -75,7 +75,7 @@ Put all back in place and restart the board. It might need 1-2 AC power cycles to reinitialize (running at full fan speed - don't panic). * External flashing has been tested with RPi2 without main power connected. 3.3V provided by RPi2. Read more about flashing methods [here](https://doc.coreboot.org/flash_tutorial/index.html). -* In case of going back to proprietary BIOS create/save cmos settings as early +* In case of going back to proprietary BIOS create/save CMOS settings as early as possible (do not leave BIOS on first start without saving settings). The BIOS might corrupt nvram (not cmos!) and leave the system in a dead state that needs an external flasher to revive. If stuck, reset the Fintek (see diff --git a/Documentation/releases/coreboot-4.6-relnotes.md b/Documentation/releases/coreboot-4.6-relnotes.md index faa3303b4c..4d19ba7fcf 100644 --- a/Documentation/releases/coreboot-4.6-relnotes.md +++ b/Documentation/releases/coreboot-4.6-relnotes.md @@ -164,7 +164,7 @@ Drivers (29 commits) * i2c/hid: Add generic I2C HID driver * i2c/max98927: add i2c driver for Maxim 98927 codec * i2c/wacom_ts: Add support for WCOM touchscreen device driver -* pc80/rtc: Check cmos checksum BEFORE reading cmos value +* pc80/rtc: Check CMOS checksum BEFORE reading CMOS value * regulator: Add driver for handling GPIO-based fixed regulator * storage: Add SD/MMC/eMMC driver based upon depthcharge -- cgit v1.2.3