From 0f4977705d64a50cf823a38227b45c7b4d4eb950 Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Tue, 28 Apr 2020 08:06:34 +0200 Subject: Documentation: Update vboot on lenovo Update the documentation now that CB:32705 is merged. Change-Id: I9845c0750ec4016188478154610400d1b8556793 Signed-off-by: Patrick Rudolph Reviewed-on: https://review.coreboot.org/c/coreboot/+/40775 Reviewed-by: Marcello Sylvester Bauer Reviewed-by: Paul Menzel Reviewed-by: Patrick Georgi Tested-by: build bot (Jenkins) --- Documentation/mainboard/lenovo/vboot.md | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'Documentation') diff --git a/Documentation/mainboard/lenovo/vboot.md b/Documentation/mainboard/lenovo/vboot.md index 4e1b946d08..3f1536018f 100644 --- a/Documentation/mainboard/lenovo/vboot.md +++ b/Documentation/mainboard/lenovo/vboot.md @@ -18,8 +18,8 @@ By using the [vboot] mechanism you store a copy of coreboot in the `RO` partition that acts as failsafe in case the regular firmware update, that goes to the `A` or `B` partition fails. -**Note:** The `RO` partition isn't write-protected by default. There's a patch -pending on gerrit [CB:32705] that write-protects the `RO` partition. +**Note:** The `RO` partition isn't write-protected by default, therefore you +have to enable the protection in the security Kconfig menu by yourself. On *Lenovo* devices you can enable the *Fn* key as recovery mode switch, by enabling `CONFIG_H8_FN_KEY_AS_VBOOT_RECOVERY_SW`. @@ -35,5 +35,4 @@ You can still provide your own FMAP if you need `RO`+`A`+`B` partitions. [vboot] on *Lenovo* devices uses the CMOS to store configuration data, like boot failures and the last successfully booted partition. -[CB:32705]: https://review.coreboot.org/32705 [vboot]: ../../security/vboot/index.md -- cgit v1.2.3