From 9e877ec60d177565776b20e3d61f723a9552ee34 Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Fri, 20 Sep 2019 12:53:09 +0200 Subject: util/supermicro: Add and use new tool smcbiosinfo The BMC and tools interacting with it depend on metadata placed inside the ROM in order the flash the BIOS. Add a new tool smcbiosinfo, integrate it into the build system, and generate a 128byte metadata file called smcbiosinfo.bin on build. You need to provide the BoardID for every SMC mainboard through a new Kconfig symbol: SUPERMICRO_BOARDID Some fields are unknown, but it's sufficient to flash it using SMC vendor tools. Tested on Supermicro X11SSH: * Flashing using the WebUI works * Flashing using SMCIPMITool works No further validation is done on the firmware. Change-Id: Id608c2ce78614b45a2fd0b26d97d666f02223998 Signed-off-by: Patrick Rudolph Reviewed-on: https://review.coreboot.org/c/coreboot/+/35484 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese Reviewed-by: Nico Huber --- .../mainboard/supermicro/flashing_on_vendorbmc.md | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/mainboard/supermicro/flashing_on_vendorbmc.md (limited to 'Documentation/mainboard/supermicro') diff --git a/Documentation/mainboard/supermicro/flashing_on_vendorbmc.md b/Documentation/mainboard/supermicro/flashing_on_vendorbmc.md new file mode 100644 index 0000000000..e02c57bcc4 --- /dev/null +++ b/Documentation/mainboard/supermicro/flashing_on_vendorbmc.md @@ -0,0 +1,32 @@ +# Flashing coreboot using SMC IPMI (BMC) firmware + +## Metadata +In order to flash anything to the "BIOS" IC, it needs to contain a valid +BIOSINFO struct. + +The BIOSINFO struct contains a `$FID` marker at the beginning and is +128 bytes in total. Besides the *BoardID* it contains the *firmware version* +and *build date*. The BMC verifies that the BoardID is correct and refuses to +flash if it's not. + +The struct has no checksum or cryptographic protection. + +## The smcinfobios tool + +The smcbiosinfo tool can be found in `util/supermicro/smcbiosinfo`. + +It parses the `build/build.h` header to get the current coreboot version and +build timestamp. +The *board ID* is passed as command line argument. + +It will place a file in CBFS called `smcbiosinfo.bin`, which is then found +by the vendor tools. The file contains the struct described above. + +## Flashing using SMCIPMItool + +You can use the *SMCIPMITool* to remotely flash the BIOS: + +`SMCIPMITool bios update build/coreboot.rom` + +Make sure that the ME isn't in recovery mode, otherwise you get an error +message on updating the BIOS. -- cgit v1.2.3