From 7a11c900b6af156bbd60b3231e9261177955e84c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonathan=20Neusch=C3=A4fer?= Date: Thu, 19 Apr 2018 16:23:55 +0200 Subject: Documentation: Add HiFive Unleashed documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: Ic97955e36feeaa18b5a0dbd502c722c06dcc1b31 Signed-off-by: Jonathan Neuschäfer Reviewed-on: https://review.coreboot.org/25792 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich --- Documentation/mainboard/sifive/hifive-unleashed.md | 104 +++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 Documentation/mainboard/sifive/hifive-unleashed.md (limited to 'Documentation/mainboard/sifive') diff --git a/Documentation/mainboard/sifive/hifive-unleashed.md b/Documentation/mainboard/sifive/hifive-unleashed.md new file mode 100644 index 0000000000..bdf5e3c341 --- /dev/null +++ b/Documentation/mainboard/sifive/hifive-unleashed.md @@ -0,0 +1,104 @@ +# SiFive HiFive Unleashed + +This page describes how to run coreboot on the [HiFive Unleashed] development +board from [SiFive], the first RISC-V board on the market with enough resources +to run a multiuser operating system. + +For general setup instructions, please refer to the [Getting Started Guide]. + + +## TODO + +The following things are still missing from this coreboot port: + +- Trampoline in the MBR block to support boot mode 1 +- SiFive UART driver +- CBMEM support +- FU540 clock configuration +- FU540 RAM init +- Placing the ramstage in DRAM +- Starting the U54 cores +- FU540 PIN configuration and GPIO access macros +- FU540 OTP driver and serial number read-out +- Support for booting Linux on RISC-V + + +## Configuration + +Run `make menuconfig` and select _SiFive_/_HiFive Unleashed_ in the _Mainboard_ +menu. + + +### Boot modes + +A total of 16 boot modes can be configured using the switches labeled `MSEL0` +through `MSEL3`. The most important ones are as follows: + +- **MSEL=1**: Jump directly into the SPI flash, bypassing ROM1 +- **MSEL=11**: Load FSBL from SD-card +- **MSEL=15**: Default boot mode; Load FSBL/coreboot from a GPT partition on + SPI flash + + +## Flashing coreboot + +The HiFive Unleashed has an 32 MiB SPI flash (**ISSI IS25WP256D**), that can be +programmed from within Linux running on the board, via USB/JTAG, or directly +with an SPI programmer. + +### Internal programming + +The SPI flash can be accessed as `/dev/mtd0` from Linux. + +### USB/JTAG + +To program the flash via USB/JTAG, connect the USB port to a computer. If the +board is powered on, two new serial ports, for example `/dev/ttyUSB0` and +`/dev/ttyUSB1` will appear. The first is JTAG, and the second is connected to +the SoC's UART. + +- Download and build the [RISC-V fork of OpenOCD]. +- Download the [OpenOCD script] for Freedom Unleashed. +- Start OpenOCD with `openocd -f openocd.cfg` +- Connect to OpenOCD's command interface (via telnet) and enter the line + marked with `> `: +``` +> flash write_image erase unlock build/coreboot.rom 0x20000000 +auto erase enabled +auto unlock enabled +wrote 33554432 bytes from file build/coreboot.rom in 1524.943848s (21.488 KiB/s) +``` + Note that programming the whole flash with OpenOCD isn't fast. In this + example it took just over 25 minutes. This process can be sped up + considerably by building/flashing a smaller image; OpenOCD does not check if + the image and the flash have the same size. + + +### External programming + +External programming with an SPI adapter and [flashrom] may work, but has not +been tested. Please study the [schematics] before going this route. + + +## Error codes + +The zeroth-stage bootloader (ZSBL) in ROM1 can print error codes on the serial +console in certain situations. + +``` +// Error codes are formatted as follows: +// [63:60] [59:56] [55:0] +// bootstage trap errorcode +// If trap == 1, then errorcode is actually the mcause register with the +// interrupt bit shifted to bit 55. +``` +(--- from the [SiFive forum](https://forums.sifive.com/t/loading-fsbl-from-sd/1156/4)) + + +[HiFive Unleashed]: https://www.crowdsupply.com/sifive/hifive-unleashed +[SiFive]: https://www.sifive.com/ +[Getting Started Guide]: https://www.sifive.com/documentation/boards/hifive-unleashed/hifive-unleashed-getting-started-guide/ +[RISC-V fork of OpenOCD]: https://github.com/riscv/riscv-openocd +[OpenOCD script]: https://github.com/sifive/freedom-u-sdk/blob/057a47f657fa33e2c60df7f183884a68e90381cc/bsp/env/freedom-u500-unleashed/openocd.cfg +[flashrom]: https://flashrom.org/Flashrom +[schematics]: https://www.sifive.com/documentation/boards/hifive-unleashed/hifive-unleashed-schematics/ -- cgit v1.2.3