From 2fd4907a4dd9e8d60dfcec2913337efe339d9233 Mon Sep 17 00:00:00 2001 From: Jonathan Neuschäfer Date: Sun, 30 Sep 2018 21:18:33 +0200 Subject: Documentation: Spell "blob" in lowercase MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's not an acronym (outside of database software). Change-Id: I529561e4fc9889be7f9d6bd6d5f9a876e2007671 Signed-off-by: Jonathan Neuschäfer Reviewed-on: https://review.coreboot.org/28827 Tested-by: build bot (Jenkins) Reviewed-by: Angel Pons Reviewed-by: Martin Roth --- Documentation/mainboard/lenovo/xx20_series.md | 4 ++-- Documentation/mainboard/lenovo/xx30_series.md | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'Documentation/mainboard/lenovo') diff --git a/Documentation/mainboard/lenovo/xx20_series.md b/Documentation/mainboard/lenovo/xx20_series.md index 976a29ba9f..8603853b94 100644 --- a/Documentation/mainboard/lenovo/xx20_series.md +++ b/Documentation/mainboard/lenovo/xx20_series.md @@ -26,8 +26,8 @@ * Do **NOT** accidently swap pins or power on the board while a SPI flasher is connected. It will destroy your device. * It's recommended to only flash the BIOS region. In that case you don't - need to extract BLOBs from vendor firmware. - If you want to flash the whole chip, you need BLOBs when building + need to extract blobs from vendor firmware. + If you want to flash the whole chip, you need blobs when building coreboot. * The shipped *Flash layout* allocates 3MiB to the BIOS region, which is the space usable by coreboot. diff --git a/Documentation/mainboard/lenovo/xx30_series.md b/Documentation/mainboard/lenovo/xx30_series.md index e65a3f2a6f..ad856057f0 100644 --- a/Documentation/mainboard/lenovo/xx30_series.md +++ b/Documentation/mainboard/lenovo/xx30_series.md @@ -26,8 +26,8 @@ * Do **NOT** accidently swap pins or power on the board while a SPI flasher is connected. It will permanently brick your device. * It's recommended to only flash the BIOS region. In that case you don't - need to extract BLOBs from vendor firmware. - If you want to flash the whole chip, you need BLOBs when building + need to extract blobs from vendor firmware. + If you want to flash the whole chip, you need blobs when building coreboot. * The *Flash layout* shows that by default 7MiB of space are available for the use with coreboot. -- cgit v1.2.3