From c7ddc999fc076bf6871e3b5e641c07f17b0b1746 Mon Sep 17 00:00:00 2001 From: Mathew King Date: Thu, 8 Aug 2019 14:59:25 -0600 Subject: ifdtool: Add validate option to ifdtool Add an option to ifdtool which validates that the flash regions defined in the descriptor match the coresponding areas in the FMAP. BUG=chromium:992215 TEST=Ran 'ifdtool -t' with a good bios image and verify no issues run 'ifdtool -t' with a bad bios image and verify expected issues Signed-off-by: Mathew King Change-Id: Idebf105dee1b8f829d54bd65c82867af7aa4aded Reviewed-on: https://review.coreboot.org/c/coreboot/+/34802 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- Documentation/ifdtool/binary_extraction.md | 68 ++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 Documentation/ifdtool/binary_extraction.md (limited to 'Documentation/ifdtool/binary_extraction.md') diff --git a/Documentation/ifdtool/binary_extraction.md b/Documentation/ifdtool/binary_extraction.md new file mode 100644 index 0000000000..fe8c25ca4e --- /dev/null +++ b/Documentation/ifdtool/binary_extraction.md @@ -0,0 +1,68 @@ +# Intel IFD Binary Extraction Tutorial + +## Part 1: Extracting Binaries + +To begin extracting the binaries, first create a directory labeled "binaries" +in the coreboot directory (i.e. /path/to/coreboot/binaries/). + +Now, execute the following commands to extract the binaries from a ROM image. +**Note:** Make sure you are in the root coreboot directory. + + cd /path/to/coreboot/util/ifdtool + ./ifdtool COREBOOT_IMAGE + ./ifdtool -d COREBOOT_IMAGE + ./ifdtool -x COREBOOT_IMAGE + +In the above steps, COREBOOT_IMAGE is the name of the ROM image to extract the +binaries from, including the file path (ex. /build/coreboot.rom). + +Copy the extracted .bin files to the binaries directory you created previously. +**Note:** You may want to rename your various .bin files to more clearly +indicate what they are and their purpose. + +To extract the mrc.bin, move to the /coreboot/build directory and run the +following command: + + cd /path/to/coreboot/build/ + ./cbfstool COREBOOT_IMAGE extract -n mrc.bin -f /path/to/destination/filename + +where COREBOOT_IMAGE is the filepath to the ROM image (same image as above), +/path/to/destination is the filepath to the destination directory and filename +is the output filename. An example command is given below: + + ./cbfstool coreboot.rom extract -n mrc.bin -f /path/to/coreboot/binaries/mrc.bin + +## Part 2: Using extract_blobs.sh + +To simplify some of the steps above, there is a script in the +/path/to/coreboot/util/chromeos/ directory called extract_blobs.sh what will +extract the flashdescriptor.bin and intel_me.bin files. + +To run this script, switch to the /path/to/coreboot/util/chromeos/ directory +and execute the script providing a coreboot image as an argument. + + cd /path/to/coreboot/util/chromeos/ + ./extract_blobs.sh COREBOOT_IMAGE + +Executing those commands will result in two binary blobs to appear in the +/path/to/coreboot/util/chromeos/ directory under the names +'flashdescriptor.bin' and 'me.bin'. + +## Part 3: Changing the coreboot configuration settings + +To begin using the binaries extracted above, enable the use of binary +repositories in the menuconfig. From the main coreboot directory, run +'make menuconfig'. Select "General Setup", then select "Allow use of +binary-only repository", then exit to the main menu. + +To configure the ROM image for a specific board, select "Mainboard". Select +"Mainboard vendor" and scroll to the correct vendor. Then select "Mainboard +model" and select the name of the board model. Exit back to the main menu. + +To add the binaries you extracted, select "Chipset". Scroll and select "Add a +System Agent Binary" and set the filepath to your mrc.bin file's filepath. +Scroll and select "Add Intel descriptor.bin file" and type the filepath for +your descriptor.bin file. Scroll down and select "Add Intel ME/TXE firmware +file" and type the filepath for your ME file. Exit to the main menu. + +Select "Exit", and select "Yes" when prompted to save your configuration. \ No newline at end of file -- cgit v1.2.3