From fb50124d22014742b6990a95df87a7a828e891b6 Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Sat, 3 Oct 2015 13:20:26 -0700 Subject: Remove sandybridge and ivybridge FSP code path We already have two other code paths for this silicon. Maintaining the FSP path as well doesn't make much sense. There was only one board to use this code, and it's a reference board that I doubt anyone still owns or uses. Change-Id: I4fcfa6c56448416624fd26418df19b354eb72f39 Signed-off-by: Alexandru Gagniuc Reviewed-on: http://review.coreboot.org/11789 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese --- src/cpu/intel/Kconfig | 1 - src/cpu/intel/Makefile.inc | 2 - src/cpu/intel/fsp_model_206ax/Kconfig | 62 -- src/cpu/intel/fsp_model_206ax/Makefile.inc | 11 - src/cpu/intel/fsp_model_206ax/acpi.c | 345 -------- src/cpu/intel/fsp_model_206ax/acpi/cpu.asl | 101 --- src/cpu/intel/fsp_model_206ax/bootblock.c | 31 - src/cpu/intel/fsp_model_206ax/chip.h | 35 - src/cpu/intel/fsp_model_206ax/finalize.c | 81 -- src/cpu/intel/fsp_model_206ax/model_206ax.h | 113 --- src/cpu/intel/fsp_model_206ax/model_206ax_init.c | 437 ---------- src/mainboard/intel/cougar_canyon2/Kconfig | 62 -- src/mainboard/intel/cougar_canyon2/Kconfig.name | 2 - src/mainboard/intel/cougar_canyon2/acpi/ec.asl | 0 .../cougar_canyon2/acpi/hostbridge_pci_irqs.asl | 99 --- .../intel/cougar_canyon2/acpi/mainboard.asl | 27 - .../intel/cougar_canyon2/acpi/platform.asl | 47 -- .../intel/cougar_canyon2/acpi/superio.asl | 35 - src/mainboard/intel/cougar_canyon2/acpi_tables.c | 84 -- src/mainboard/intel/cougar_canyon2/board_info.txt | 2 - src/mainboard/intel/cougar_canyon2/cmos.layout | 118 --- src/mainboard/intel/cougar_canyon2/devicetree.cb | 70 -- src/mainboard/intel/cougar_canyon2/dsdt.asl | 53 -- src/mainboard/intel/cougar_canyon2/gpio.h | 308 ------- src/mainboard/intel/cougar_canyon2/hda_verb.c | 43 - src/mainboard/intel/cougar_canyon2/mainboard.c | 56 -- src/mainboard/intel/cougar_canyon2/mainboard_smi.c | 75 -- src/mainboard/intel/cougar_canyon2/romstage.c | 323 ------- src/mainboard/intel/cougar_canyon2/thermal.h | 57 -- src/northbridge/intel/fsp_sandybridge/Kconfig | 46 - src/northbridge/intel/fsp_sandybridge/Makefile.inc | 41 - src/northbridge/intel/fsp_sandybridge/acpi.c | 212 ----- .../intel/fsp_sandybridge/acpi/hostbridge.asl | 359 -------- src/northbridge/intel/fsp_sandybridge/acpi/igd.asl | 78 -- .../intel/fsp_sandybridge/acpi/sandybridge.asl | 58 -- src/northbridge/intel/fsp_sandybridge/chip.h | 45 - src/northbridge/intel/fsp_sandybridge/early_init.c | 88 -- src/northbridge/intel/fsp_sandybridge/finalize.c | 56 -- src/northbridge/intel/fsp_sandybridge/fsp/Kconfig | 40 - .../intel/fsp_sandybridge/fsp/Makefile.inc | 21 - .../intel/fsp_sandybridge/fsp/chipset_fsp_util.c | 113 --- .../intel/fsp_sandybridge/fsp/chipset_fsp_util.h | 68 -- src/northbridge/intel/fsp_sandybridge/gma.c | 110 --- src/northbridge/intel/fsp_sandybridge/gma.h | 167 ---- .../intel/fsp_sandybridge/northbridge.c | 407 --------- .../intel/fsp_sandybridge/northbridge.h | 231 ----- .../intel/fsp_sandybridge/northbridge_pci_devs.h | 47 -- src/northbridge/intel/fsp_sandybridge/ram_calc.c | 38 - src/northbridge/intel/fsp_sandybridge/raminit.c | 76 -- src/northbridge/intel/fsp_sandybridge/raminit.h | 25 - .../intel/fsp_sandybridge/report_platform.c | 114 --- src/northbridge/intel/fsp_sandybridge/udelay.c | 55 -- src/southbridge/intel/fsp_bd82x6x/Kconfig | 57 -- src/southbridge/intel/fsp_bd82x6x/Makefile.inc | 51 -- src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl | 34 - .../intel/fsp_bd82x6x/acpi/globalnvs.asl | 286 ------- .../intel/fsp_bd82x6x/acpi/irqlinks.asl | 491 ----------- src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl | 223 ----- src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl | 274 ------ src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl | 217 ----- .../intel/fsp_bd82x6x/acpi/pcie_port.asl | 29 - src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl | 81 -- .../intel/fsp_bd82x6x/acpi/sleepstates.asl | 30 - src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl | 240 ------ src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl | 89 -- src/southbridge/intel/fsp_bd82x6x/azalia.c | 371 -------- src/southbridge/intel/fsp_bd82x6x/bootblock.c | 98 --- src/southbridge/intel/fsp_bd82x6x/chip.h | 95 --- src/southbridge/intel/fsp_bd82x6x/early_init.c | 190 ----- src/southbridge/intel/fsp_bd82x6x/early_me.c | 199 ----- src/southbridge/intel/fsp_bd82x6x/early_smbus.c | 215 ----- src/southbridge/intel/fsp_bd82x6x/early_spi.c | 114 --- src/southbridge/intel/fsp_bd82x6x/early_usb.c | 56 -- src/southbridge/intel/fsp_bd82x6x/elog.c | 114 --- src/southbridge/intel/fsp_bd82x6x/finalize.c | 64 -- src/southbridge/intel/fsp_bd82x6x/gpio.c | 135 --- src/southbridge/intel/fsp_bd82x6x/gpio.h | 194 ----- src/southbridge/intel/fsp_bd82x6x/lpc.c | 784 ----------------- src/southbridge/intel/fsp_bd82x6x/me.c | 773 ----------------- src/southbridge/intel/fsp_bd82x6x/me.h | 372 --------- src/southbridge/intel/fsp_bd82x6x/me_8.x.c | 928 --------------------- src/southbridge/intel/fsp_bd82x6x/me_status.c | 212 ----- src/southbridge/intel/fsp_bd82x6x/nvs.h | 159 ---- src/southbridge/intel/fsp_bd82x6x/pch.c | 410 --------- src/southbridge/intel/fsp_bd82x6x/pch.h | 589 ------------- src/southbridge/intel/fsp_bd82x6x/reset.c | 33 - src/southbridge/intel/fsp_bd82x6x/sata.c | 122 --- src/southbridge/intel/fsp_bd82x6x/smi.c | 351 -------- src/southbridge/intel/fsp_bd82x6x/smihandler.c | 760 ----------------- .../intel/fsp_bd82x6x/southbridge_pci_devs.h | 127 --- src/southbridge/intel/fsp_bd82x6x/watchdog.c | 59 -- src/vendorcode/intel/Kconfig | 1 - util/board_status/to-wiki/towiki.sh | 2 +- 93 files changed, 1 insertion(+), 14803 deletions(-) delete mode 100644 src/cpu/intel/fsp_model_206ax/Kconfig delete mode 100644 src/cpu/intel/fsp_model_206ax/Makefile.inc delete mode 100644 src/cpu/intel/fsp_model_206ax/acpi.c delete mode 100644 src/cpu/intel/fsp_model_206ax/acpi/cpu.asl delete mode 100644 src/cpu/intel/fsp_model_206ax/bootblock.c delete mode 100644 src/cpu/intel/fsp_model_206ax/chip.h delete mode 100644 src/cpu/intel/fsp_model_206ax/finalize.c delete mode 100644 src/cpu/intel/fsp_model_206ax/model_206ax.h delete mode 100644 src/cpu/intel/fsp_model_206ax/model_206ax_init.c delete mode 100644 src/mainboard/intel/cougar_canyon2/Kconfig delete mode 100644 src/mainboard/intel/cougar_canyon2/Kconfig.name delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi/ec.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi/platform.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi/superio.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/acpi_tables.c delete mode 100644 src/mainboard/intel/cougar_canyon2/board_info.txt delete mode 100644 src/mainboard/intel/cougar_canyon2/cmos.layout delete mode 100644 src/mainboard/intel/cougar_canyon2/devicetree.cb delete mode 100644 src/mainboard/intel/cougar_canyon2/dsdt.asl delete mode 100644 src/mainboard/intel/cougar_canyon2/gpio.h delete mode 100644 src/mainboard/intel/cougar_canyon2/hda_verb.c delete mode 100644 src/mainboard/intel/cougar_canyon2/mainboard.c delete mode 100644 src/mainboard/intel/cougar_canyon2/mainboard_smi.c delete mode 100644 src/mainboard/intel/cougar_canyon2/romstage.c delete mode 100644 src/mainboard/intel/cougar_canyon2/thermal.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/Kconfig delete mode 100644 src/northbridge/intel/fsp_sandybridge/Makefile.inc delete mode 100644 src/northbridge/intel/fsp_sandybridge/acpi.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl delete mode 100644 src/northbridge/intel/fsp_sandybridge/acpi/igd.asl delete mode 100644 src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl delete mode 100644 src/northbridge/intel/fsp_sandybridge/chip.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/early_init.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/finalize.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/fsp/Kconfig delete mode 100644 src/northbridge/intel/fsp_sandybridge/fsp/Makefile.inc delete mode 100644 src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/gma.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/gma.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/northbridge.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/northbridge.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/northbridge_pci_devs.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/ram_calc.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/raminit.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/raminit.h delete mode 100644 src/northbridge/intel/fsp_sandybridge/report_platform.c delete mode 100644 src/northbridge/intel/fsp_sandybridge/udelay.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/Kconfig delete mode 100644 src/southbridge/intel/fsp_bd82x6x/Makefile.inc delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl delete mode 100644 src/southbridge/intel/fsp_bd82x6x/azalia.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/bootblock.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/chip.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/early_init.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/early_me.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/early_smbus.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/early_spi.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/early_usb.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/elog.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/finalize.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/gpio.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/gpio.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/lpc.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/me.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/me.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/me_8.x.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/me_status.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/nvs.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/pch.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/pch.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/reset.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/sata.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/smi.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/smihandler.c delete mode 100644 src/southbridge/intel/fsp_bd82x6x/southbridge_pci_devs.h delete mode 100644 src/southbridge/intel/fsp_bd82x6x/watchdog.c diff --git a/src/cpu/intel/Kconfig b/src/cpu/intel/Kconfig index b388c50f29..ab63682414 100644 --- a/src/cpu/intel/Kconfig +++ b/src/cpu/intel/Kconfig @@ -11,7 +11,6 @@ source src/cpu/intel/model_6fx/Kconfig source src/cpu/intel/model_1067x/Kconfig source src/cpu/intel/model_106cx/Kconfig source src/cpu/intel/model_206ax/Kconfig -source src/cpu/intel/fsp_model_206ax/Kconfig source src/cpu/intel/fsp_model_406dx/Kconfig source src/cpu/intel/model_2065x/Kconfig source src/cpu/intel/model_f0x/Kconfig diff --git a/src/cpu/intel/Makefile.inc b/src/cpu/intel/Makefile.inc index 859b73beab..8d9833aa68 100644 --- a/src/cpu/intel/Makefile.inc +++ b/src/cpu/intel/Makefile.inc @@ -22,8 +22,6 @@ subdirs-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE_MRC) += model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_HASWELL) += haswell -subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE) += fsp_model_206ax -subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE) += fsp_model_206ax subdirs-$(CONFIG_NORTHBRIDGE_INTEL_FSP_RANGELEY) += fsp_model_406dx subdirs-$(CONFIG_CPU_INTEL_SLOT_2) += slot_2 subdirs-$(CONFIG_CPU_INTEL_SLOT_1) += slot_1 diff --git a/src/cpu/intel/fsp_model_206ax/Kconfig b/src/cpu/intel/fsp_model_206ax/Kconfig deleted file mode 100644 index 606000e4be..0000000000 --- a/src/cpu/intel/fsp_model_206ax/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2013 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - - -config CPU_INTEL_FSP_MODEL_206AX - bool - -config CPU_INTEL_FSP_MODEL_306AX - bool - -if CPU_INTEL_FSP_MODEL_206AX || CPU_INTEL_FSP_MODEL_306AX - -config CPU_SPECIFIC_OPTIONS - def_bool y - select PLATFORM_USES_FSP1_0 - select ARCH_BOOTBLOCK_X86_32 - select ARCH_VERSTAGE_X86_32 - select ARCH_ROMSTAGE_X86_32 - select ARCH_RAMSTAGE_X86_32 - select SMP - select SSE2 - select UDELAY_LAPIC - select SMM_TSEG - select SUPPORT_CPU_UCODE_IN_CBFS if HAVE_FSP_BIN - select PARALLEL_CPU_INIT - select TSC_SYNC_MFENCE - select LAPIC_MONOTONIC_TIMER - -config BOOTBLOCK_CPU_INIT - string - default "cpu/intel/fsp_model_206ax/bootblock.c" - -config SMM_TSEG_SIZE - hex - default 0x800000 - -config ENABLE_VMX - bool "Enable VMX for virtualization" - default n - -config CPU_MICROCODE_CBFS_LOC - hex - depends on SUPPORT_CPU_UCODE_IN_CBFS - default 0xfff70000 - -endif diff --git a/src/cpu/intel/fsp_model_206ax/Makefile.inc b/src/cpu/intel/fsp_model_206ax/Makefile.inc deleted file mode 100644 index d2d61ef883..0000000000 --- a/src/cpu/intel/fsp_model_206ax/Makefile.inc +++ /dev/null @@ -1,11 +0,0 @@ -ramstage-y += model_206ax_init.c -subdirs-y += ../../x86/name -subdirs-y += ../smm/gen1 - -ramstage-y += acpi.c - -smm-$(CONFIG_HAVE_SMI_HANDLER) += finalize.c - -CPPFLAGS_romstage += -I$(src)/cpu/intel/fsp_model_206ax -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_206ax/microcode.bin -cpu_microcode_bins += 3rdparty/blobs/cpu/intel/model_306ax/microcode.bin diff --git a/src/cpu/intel/fsp_model_206ax/acpi.c b/src/cpu/intel/fsp_model_206ax/acpi.c deleted file mode 100644 index 272f4863fa..0000000000 --- a/src/cpu/intel/fsp_model_206ax/acpi.c +++ /dev/null @@ -1,345 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2009 coresystems GmbH - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "model_206ax.h" -#include "chip.h" - -static int get_cores_per_package(void) -{ - struct cpuinfo_x86 c; - struct cpuid_result result; - int cores = 1; - - get_fms(&c, cpuid_eax(1)); - if (c.x86 != 6) - return 1; - - result = cpuid_ext(0xb, 1); - cores = result.ebx & 0xff; - - return cores; -} - -static void generate_cstate_entries(acpi_cstate_t *cstates, - int c1, int c2, int c3) -{ - int cstate_count = 0; - - /* Count number of active C-states */ - if (c1 > 0) - ++cstate_count; - if (c2 > 0) - ++cstate_count; - if (c3 > 0) - ++cstate_count; - if (!cstate_count) - return; - - acpigen_write_package(cstate_count + 1); - acpigen_write_byte(cstate_count); - - /* Add an entry if the level is enabled */ - if (c1 > 0) { - cstates[c1].ctype = 1; - acpigen_write_CST_package_entry(&cstates[c1]); - } - if (c2 > 0) { - cstates[c2].ctype = 2; - acpigen_write_CST_package_entry(&cstates[c2]); - } - if (c3 > 0) { - cstates[c3].ctype = 3; - acpigen_write_CST_package_entry(&cstates[c3]); - } - - acpigen_pop_len(); -} - -static void generate_C_state_entries(void) -{ - struct cpu_info *info; - struct cpu_driver *cpu; - struct device *lapic; - struct cpu_intel_fsp_model_206ax_config *conf = NULL; - - /* Find the SpeedStep CPU in the device tree using magic APIC ID */ - lapic = dev_find_lapic(SPEEDSTEP_APIC_MAGIC); - if (!lapic) - return; - conf = lapic->chip_info; - if (!conf) - return; - - /* Find CPU map of supported C-states */ - info = cpu_info(); - if (!info) - return; - cpu = find_cpu_driver(info->cpu); - if (!cpu || !cpu->cstates) - return; - - acpigen_write_method("_CST", 0); - - /* If running on AC power */ - acpigen_emit_byte(0xa0); /* IfOp */ - acpigen_write_len_f(); /* PkgLength */ - acpigen_emit_namestring("PWRS"); - acpigen_emit_byte(0xa4); /* ReturnOp */ - generate_cstate_entries(cpu->cstates, conf->c1_acpower, - conf->c2_acpower, conf->c3_acpower); - acpigen_pop_len(); - - /* Else on battery power */ - acpigen_emit_byte(0xa4); /* ReturnOp */ - generate_cstate_entries(cpu->cstates, conf->c1_battery, - conf->c2_battery, conf->c3_battery); - acpigen_pop_len(); -} - -static acpi_tstate_t tss_table_fine[] = { - { 100, 1000, 0, 0x00, 0 }, - { 94, 940, 0, 0x1f, 0 }, - { 88, 880, 0, 0x1e, 0 }, - { 82, 820, 0, 0x1d, 0 }, - { 75, 760, 0, 0x1c, 0 }, - { 69, 700, 0, 0x1b, 0 }, - { 63, 640, 0, 0x1a, 0 }, - { 57, 580, 0, 0x19, 0 }, - { 50, 520, 0, 0x18, 0 }, - { 44, 460, 0, 0x17, 0 }, - { 38, 400, 0, 0x16, 0 }, - { 32, 340, 0, 0x15, 0 }, - { 25, 280, 0, 0x14, 0 }, - { 19, 220, 0, 0x13, 0 }, - { 13, 160, 0, 0x12, 0 }, -}; - -static acpi_tstate_t tss_table_coarse[] = { - { 100, 1000, 0, 0x00, 0 }, - { 88, 875, 0, 0x1f, 0 }, - { 75, 750, 0, 0x1e, 0 }, - { 63, 625, 0, 0x1d, 0 }, - { 50, 500, 0, 0x1c, 0 }, - { 38, 375, 0, 0x1b, 0 }, - { 25, 250, 0, 0x1a, 0 }, - { 13, 125, 0, 0x19, 0 }, -}; - -static void generate_T_state_entries(int core, int cores_per_package) -{ - /* Indicate SW_ALL coordination for T-states */ - acpigen_write_TSD_package(core, cores_per_package, SW_ALL); - - /* Indicate FFixedHW so OS will use MSR */ - acpigen_write_empty_PTC(); - - /* Set a T-state limit that can be modified in NVS */ - acpigen_write_TPC("\\TLVL"); - - /* - * CPUID.(EAX=6):EAX[5] indicates support - * for extended throttle levels. - */ - if (cpuid_eax(6) & (1 << 5)) - acpigen_write_TSS_package( - ARRAY_SIZE(tss_table_fine), tss_table_fine); - else - acpigen_write_TSS_package( - ARRAY_SIZE(tss_table_coarse), tss_table_coarse); -} - -static int calculate_power(int tdp, int p1_ratio, int ratio) -{ - u32 m; - u32 power; - - /* - * M = ((1.1 - ((p1_ratio - ratio) * 0.00625)) / 1.1) ^ 2 - * - * Power = (ratio / p1_ratio) * m * tdp - */ - - m = (110000 - ((p1_ratio - ratio) * 625)) / 11; - m = (m * m) / 1000; - - power = ((ratio * 100000 / p1_ratio) / 100); - power *= (m / 100) * (tdp / 1000); - power /= 1000; - - return (int)power; -} - -static void generate_P_state_entries(int core, int cores_per_package) -{ - int ratio_min, ratio_max, ratio_turbo, ratio_step; - int coord_type, power_max, power_unit, num_entries; - int ratio, power, clock, clock_max; - msr_t msr; - - /* Determine P-state coordination type from MISC_PWR_MGMT[0] */ - msr = rdmsr(MSR_MISC_PWR_MGMT); - if (msr.lo & MISC_PWR_MGMT_EIST_HW_DIS) - coord_type = SW_ANY; - else - coord_type = HW_ALL; - - /* Get bus ratio limits and calculate clock speeds */ - msr = rdmsr(MSR_PLATFORM_INFO); - ratio_min = (msr.hi >> (40-32)) & 0xff; /* Max Efficiency Ratio */ - - /* Determine if this CPU has configurable TDP */ - if (cpu_config_tdp_levels()) { - /* Set max ratio to nominal TDP ratio */ - msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); - ratio_max = msr.lo & 0xff; - } else { - /* Max Non-Turbo Ratio */ - ratio_max = (msr.lo >> 8) & 0xff; - } - clock_max = ratio_max * SANDYBRIDGE_BCLK; - - /* Calculate CPU TDP in mW */ - msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); - power_unit = 2 << ((msr.lo & 0xf) - 1); - msr = rdmsr(MSR_PKG_POWER_SKU); - power_max = ((msr.lo & 0x7fff) / power_unit) * 1000; - - /* Write _PCT indicating use of FFixedHW */ - acpigen_write_empty_PCT(); - - /* Write _PPC with no limit on supported P-state */ - acpigen_write_PPC_NVS(); - - /* Write PSD indicating configured coordination type */ - acpigen_write_PSD_package(core, cores_per_package, coord_type); - - /* Add P-state entries in _PSS table */ - acpigen_write_name("_PSS"); - - /* Determine ratio points */ - ratio_step = PSS_RATIO_STEP; - num_entries = (ratio_max - ratio_min) / ratio_step; - while (num_entries > PSS_MAX_ENTRIES-1) { - ratio_step <<= 1; - num_entries >>= 1; - } - - /* P[T] is Turbo state if enabled */ - if (get_turbo_state() == TURBO_ENABLED) { - /* _PSS package count including Turbo */ - acpigen_write_package(num_entries + 2); - - msr = rdmsr(MSR_TURBO_RATIO_LIMIT); - ratio_turbo = msr.lo & 0xff; - - /* Add entry for Turbo ratio */ - acpigen_write_PSS_package( - clock_max + 1, /*MHz*/ - power_max, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio_turbo << 8, /*control*/ - ratio_turbo << 8); /*status*/ - } else { - /* _PSS package count without Turbo */ - acpigen_write_package(num_entries + 1); - } - - /* First regular entry is max non-turbo ratio */ - acpigen_write_PSS_package( - clock_max, /*MHz*/ - power_max, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio_max << 8, /*control*/ - ratio_max << 8); /*status*/ - - /* Generate the remaining entries */ - for (ratio = ratio_min + ((num_entries - 1) * ratio_step); - ratio >= ratio_min; ratio -= ratio_step) { - - /* Calculate power at this ratio */ - power = calculate_power(power_max, ratio_max, ratio); - clock = ratio * SANDYBRIDGE_BCLK; - - acpigen_write_PSS_package( - clock, /*MHz*/ - power, /*mW*/ - PSS_LATENCY_TRANSITION, /*lat1*/ - PSS_LATENCY_BUSMASTER, /*lat2*/ - ratio << 8, /*control*/ - ratio << 8); /*status*/ - } - - /* Fix package length */ - acpigen_pop_len(); -} - -void generate_cpu_entries(device_t device) -{ - int coreID, cpuID, pcontrol_blk = PMB0_BASE, plen = 6; - int totalcores = dev_count_cpu(); - int cores_per_package = get_cores_per_package(); - int numcpus = totalcores/cores_per_package; - - printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", - numcpus, cores_per_package); - - for (cpuID = 1; cpuID <= numcpus; cpuID++) { - for (coreID=1; coreID<=cores_per_package; coreID++) { - if (coreID>1) { - pcontrol_blk = 0; - plen = 0; - } - - /* Generate processor \_PR.CPUx */ - acpigen_write_processor( - (cpuID-1)*cores_per_package+coreID-1, - pcontrol_blk, plen); - - /* Generate P-state tables */ - generate_P_state_entries( - cpuID-1, cores_per_package); - - /* Generate C-state tables */ - generate_C_state_entries(); - - /* Generate T-state tables */ - generate_T_state_entries( - cpuID-1, cores_per_package); - - acpigen_pop_len(); - } - } -} - -struct chip_operations cpu_intel_model_206ax_ops = { - CHIP_NAME("Intel SandyBridge/IvyBridge CPU") -}; diff --git a/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl b/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl deleted file mode 100644 index 114dbe3b98..0000000000 --- a/src/cpu/intel/fsp_model_206ax/acpi/cpu.asl +++ /dev/null @@ -1,101 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* These devices are created at runtime */ -External (\_PR.CP00, DeviceObj) -External (\_PR.CP01, DeviceObj) -External (\_PR.CP02, DeviceObj) -External (\_PR.CP03, DeviceObj) -External (\_PR.CP04, DeviceObj) -External (\_PR.CP05, DeviceObj) -External (\_PR.CP06, DeviceObj) -External (\_PR.CP07, DeviceObj) - -/* Notify OS to re-read CPU tables, assuming ^2 CPU count */ -Method (PNOT) -{ - If (LGreaterEqual (\PCNT, 2)) { - Notify (\_PR.CP00, 0x81) // _CST - Notify (\_PR.CP01, 0x81) // _CST - } - If (LGreaterEqual (\PCNT, 4)) { - Notify (\_PR.CP02, 0x81) // _CST - Notify (\_PR.CP03, 0x81) // _CST - } - If (LGreaterEqual (\PCNT, 8)) { - Notify (\_PR.CP04, 0x81) // _CST - Notify (\_PR.CP05, 0x81) // _CST - Notify (\_PR.CP06, 0x81) // _CST - Notify (\_PR.CP07, 0x81) // _CST - } -} - -/* Notify OS to re-read CPU _PPC limit, assuming ^2 CPU count */ -Method (PPCN) -{ - If (LGreaterEqual (\PCNT, 2)) { - Notify (\_PR.CP00, 0x80) // _PPC - Notify (\_PR.CP01, 0x80) // _PPC - } - If (LGreaterEqual (\PCNT, 4)) { - Notify (\_PR.CP02, 0x80) // _PPC - Notify (\_PR.CP03, 0x80) // _PPC - } - If (LGreaterEqual (\PCNT, 8)) { - Notify (\_PR.CP04, 0x80) // _PPC - Notify (\_PR.CP05, 0x80) // _PPC - Notify (\_PR.CP06, 0x80) // _PPC - Notify (\_PR.CP07, 0x80) // _PPC - } -} - -/* Notify OS to re-read Throttle Limit tables, assuming ^2 CPU count */ -Method (TNOT) -{ - If (LGreaterEqual (\PCNT, 2)) { - Notify (\_PR.CP00, 0x82) // _TPC - Notify (\_PR.CP01, 0x82) // _TPC - } - If (LGreaterEqual (\PCNT, 4)) { - Notify (\_PR.CP02, 0x82) // _TPC - Notify (\_PR.CP03, 0x82) // _TPC - } - If (LGreaterEqual (\PCNT, 8)) { - Notify (\_PR.CP04, 0x82) // _TPC - Notify (\_PR.CP05, 0x82) // _TPC - Notify (\_PR.CP06, 0x82) // _TPC - Notify (\_PR.CP07, 0x82) // _TPC - } -} - -/* Return a package containing enabled processor entries */ -Method (PPKG) -{ - If (LGreaterEqual (\PCNT, 8)) { - Return (Package() {\_PR.CP00, \_PR.CP01, \_PR.CP02, \_PR.CP03, - \_PR.CP04, \_PR.CP05, \_PR.CP06, \_PR.CP07}) - } ElseIf (LGreaterEqual (\PCNT, 4)) { - Return (Package() {\_PR.CP00, \_PR.CP01, \_PR.CP02, \_PR.CP03}) - } ElseIf (LGreaterEqual (\PCNT, 2)) { - Return (Package() {\_PR.CP00, \_PR.CP01}) - } Else { - Return (Package() {\_PR.CP00}) - } -} diff --git a/src/cpu/intel/fsp_model_206ax/bootblock.c b/src/cpu/intel/fsp_model_206ax/bootblock.c deleted file mode 100644 index 28cbd7ef77..0000000000 --- a/src/cpu/intel/fsp_model_206ax/bootblock.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include - -#include "model_206ax.h" - -static void bootblock_cpu_init(void) -{ -} diff --git a/src/cpu/intel/fsp_model_206ax/chip.h b/src/cpu/intel/fsp_model_206ax/chip.h deleted file mode 100644 index 759a74cdde..0000000000 --- a/src/cpu/intel/fsp_model_206ax/chip.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Magic value used to locate this chip in the device tree */ -#define SPEEDSTEP_APIC_MAGIC 0xACAC - -struct cpu_intel_fsp_model_206ax_config { - u8 disable_acpi; /* Do not generate CPU ACPI tables */ - - int c1_battery; /* ACPI C1 on Battery Power */ - int c2_battery; /* ACPI C2 on Battery Power */ - int c3_battery; /* ACPI C3 on Battery Power */ - - int c1_acpower; /* ACPI C1 on AC Power */ - int c2_acpower; /* ACPI C2 on AC Power */ - int c3_acpower; /* ACPI C3 on AC Power */ - - int tcc_offset; /* TCC Activation Offset */ -}; diff --git a/src/cpu/intel/fsp_model_206ax/finalize.c b/src/cpu/intel/fsp_model_206ax/finalize.c deleted file mode 100644 index 839d9508ee..0000000000 --- a/src/cpu/intel/fsp_model_206ax/finalize.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include "model_206ax.h" - -/* MSR Documentation based on - * "Sandy Bridge Processor Family BIOS Writer's Guide (BWG)" - * Document Number 504790 - * Revision 1.6.0, June 2012 */ - -static void msr_set_bit(unsigned reg, unsigned bit) -{ - msr_t msr = rdmsr(reg); - - if (bit < 32) { - if (msr.lo & (1 << bit)) - return; - msr.lo |= 1 << bit; - } else { - if (msr.hi & (1 << (bit - 32))) - return; - msr.hi |= 1 << (bit - 32); - } - - wrmsr(reg, msr); -} - -void intel_model_206ax_finalize_smm(void) -{ - /* Lock C-State MSR */ - msr_set_bit(MSR_PMG_CST_CONFIG_CONTROL, 15); - - /* Lock AES-NI only if supported */ - if (cpuid_ecx(1) & (1 << 25)) - msr_set_bit(MSR_FEATURE_CONFIG, 0); - -#ifdef LOCK_POWER_CONTROL_REGISTERS - /* - * Lock the power control registers. - * - * These registers can be left unlocked if modifying power - * limits from the OS is desirable. Modifying power limits - * from the OS can be especially useful for experimentation - * during early phases of system bringup while the thermal - * power envelope is being proven. - */ - - msr_set_bit(MSR_PP0_CURRENT_CONFIG, 31); - msr_set_bit(MSR_PP1_CURRENT_CONFIG, 31); - msr_set_bit(MSR_PKG_POWER_LIMIT, 63); - msr_set_bit(MSR_PP0_POWER_LIMIT, 31); - msr_set_bit(MSR_PP1_POWER_LIMIT, 31); -#endif - - /* Lock TM interupts - route thermal events to all processors */ - msr_set_bit(MSR_MISC_PWR_MGMT, 22); - - /* Lock memory configuration to protect SMM */ - msr_set_bit(MSR_LT_LOCK_MEMORY, 0); -} diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax.h b/src/cpu/intel/fsp_model_206ax/model_206ax.h deleted file mode 100644 index bf5de53705..0000000000 --- a/src/cpu/intel/fsp_model_206ax/model_206ax.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _CPU_INTEL_MODEL_206AX_H -#define _CPU_INTEL_MODEL_206AX_H - -/* SandyBridge/IvyBridge bus clock is fixed at 100MHz */ -#define SANDYBRIDGE_BCLK 100 - -#define IA32_FEATURE_CONTROL 0x3a -#define CPUID_VMX (1 << 5) -#define CPUID_SMX (1 << 6) -#define MSR_FEATURE_CONFIG 0x13c -#define MSR_FLEX_RATIO 0x194 -#define FLEX_RATIO_LOCK (1 << 20) -#define FLEX_RATIO_EN (1 << 16) -#define IA32_PLATFORM_DCA_CAP 0x1f8 -#define IA32_MISC_ENABLE 0x1a0 -#define MSR_TEMPERATURE_TARGET 0x1a2 -#define IA32_PERF_CTL 0x199 -#define IA32_THERM_INTERRUPT 0x19b -#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0 -#define ENERGY_POLICY_PERFORMANCE 0 -#define ENERGY_POLICY_NORMAL 6 -#define ENERGY_POLICY_POWERSAVE 15 -#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2 -#define MSR_LT_LOCK_MEMORY 0x2e7 -#define IA32_MC0_STATUS 0x401 - -#define MSR_PIC_MSG_CONTROL 0x2e -#define MSR_PLATFORM_INFO 0xce -#define PLATFORM_INFO_SET_TDP (1 << 29) -#define MSR_PMG_CST_CONFIG_CONTROL 0xe2 -#define MSR_PMG_IO_CAPTURE_BASE 0xe4 - -#define MSR_MISC_PWR_MGMT 0x1aa -#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) -#define MSR_TURBO_RATIO_LIMIT 0x1ad -#define MSR_POWER_CTL 0x1fc - -#define MSR_PKGC3_IRTL 0x60a -#define MSR_PKGC6_IRTL 0x60b -#define MSR_PKGC7_IRTL 0x60c -#define IRTL_VALID (1 << 15) -#define IRTL_1_NS (0 << 10) -#define IRTL_32_NS (1 << 10) -#define IRTL_1024_NS (2 << 10) -#define IRTL_32768_NS (3 << 10) -#define IRTL_1048576_NS (4 << 10) -#define IRTL_33554432_NS (5 << 10) -#define IRTL_RESPONSE_MASK (0x3ff) - -/* long duration in low dword, short duration in high dword */ -#define MSR_PKG_POWER_LIMIT 0x610 -#define PKG_POWER_LIMIT_MASK 0x7fff -#define PKG_POWER_LIMIT_EN (1 << 15) -#define PKG_POWER_LIMIT_CLAMP (1 << 16) -#define PKG_POWER_LIMIT_TIME_SHIFT 17 -#define PKG_POWER_LIMIT_TIME_MASK 0x7f - -#define MSR_PP0_CURRENT_CONFIG 0x601 -#define PP0_CURRENT_LIMIT (112 << 3) /* 112 A */ -#define MSR_PP1_CURRENT_CONFIG 0x602 -#define PP1_CURRENT_LIMIT_SNB (35 << 3) /* 35 A */ -#define PP1_CURRENT_LIMIT_IVB (50 << 3) /* 50 A */ -#define MSR_PKG_POWER_SKU_UNIT 0x606 -#define MSR_PKG_POWER_SKU 0x614 -#define MSR_PP0_POWER_LIMIT 0x638 -#define MSR_PP1_POWER_LIMIT 0x640 - -#define IVB_CONFIG_TDP_MIN_CPUID 0x306a2 -#define MSR_CONFIG_TDP_NOMINAL 0x648 -#define MSR_CONFIG_TDP_LEVEL1 0x649 -#define MSR_CONFIG_TDP_LEVEL2 0x64a -#define MSR_CONFIG_TDP_CONTROL 0x64b -#define MSR_TURBO_ACTIVATION_RATIO 0x64c - -/* P-state configuration */ -#define PSS_MAX_ENTRIES 8 -#define PSS_RATIO_STEP 2 -#define PSS_LATENCY_TRANSITION 10 -#define PSS_LATENCY_BUSMASTER 10 - -#ifndef __ROMCC__ -#ifdef __SMM__ -/* Lock MSRs */ -void intel_model_206ax_finalize_smm(void); -#else -/* Configure power limits for turbo mode */ -void set_power_limits(u8 power_limit_1_time); -int cpu_config_tdp_levels(void); -void smm_relocate(void); -#endif -#endif - -#endif diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax_init.c b/src/cpu/intel/fsp_model_206ax/model_206ax_init.c deleted file mode 100644 index 9b76c22aa2..0000000000 --- a/src/cpu/intel/fsp_model_206ax/model_206ax_init.c +++ /dev/null @@ -1,437 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "model_206ax.h" -#include "chip.h" -#include - -static void enable_vmx(void) -{ - struct cpuid_result regs; - msr_t msr; - int enable = IS_ENABLED(CONFIG_ENABLE_VMX); - - regs = cpuid(1); - /* Check that the VMX is supported before reading or writing the MSR. */ - if (!((regs.ecx & CPUID_VMX) || (regs.ecx & CPUID_SMX))) - return; - - msr = rdmsr(IA32_FEATURE_CONTROL); - - if (msr.lo & (1 << 0)) { - printk(BIOS_ERR, "VMX is locked, so %s will do nothing\n", __func__); - /* VMX locked. If we set it again we get an illegal - * instruction - */ - return; - } - - /* The IA32_FEATURE_CONTROL MSR may initialize with random values. - * It must be cleared regardless of VMX config setting. - */ - msr.hi = msr.lo = 0; - - printk(BIOS_DEBUG, "%s VMX\n", enable ? "Enabling" : "Disabling"); - - if (enable) { - msr.lo |= (1 << 2); - if (regs.ecx & CPUID_SMX) - msr.lo |= (1 << 1); - } - - wrmsr(IA32_FEATURE_CONTROL, msr); -} - -/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ -static const u8 power_limit_time_sec_to_msr[] = { - [0] = 0x00, - [1] = 0x0a, - [2] = 0x0b, - [3] = 0x4b, - [4] = 0x0c, - [5] = 0x2c, - [6] = 0x4c, - [7] = 0x6c, - [8] = 0x0d, - [10] = 0x2d, - [12] = 0x4d, - [14] = 0x6d, - [16] = 0x0e, - [20] = 0x2e, - [24] = 0x4e, - [28] = 0x6e, - [32] = 0x0f, - [40] = 0x2f, - [48] = 0x4f, - [56] = 0x6f, - [64] = 0x10, - [80] = 0x30, - [96] = 0x50, - [112] = 0x70, - [128] = 0x11, -}; - -/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ -static const u8 power_limit_time_msr_to_sec[] = { - [0x00] = 0, - [0x0a] = 1, - [0x0b] = 2, - [0x4b] = 3, - [0x0c] = 4, - [0x2c] = 5, - [0x4c] = 6, - [0x6c] = 7, - [0x0d] = 8, - [0x2d] = 10, - [0x4d] = 12, - [0x6d] = 14, - [0x0e] = 16, - [0x2e] = 20, - [0x4e] = 24, - [0x6e] = 28, - [0x0f] = 32, - [0x2f] = 40, - [0x4f] = 48, - [0x6f] = 56, - [0x10] = 64, - [0x30] = 80, - [0x50] = 96, - [0x70] = 112, - [0x11] = 128, -}; - -int cpu_config_tdp_levels(void) -{ - msr_t platform_info; - - /* Minimum CPU revision */ - if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID) - return 0; - - /* Bits 34:33 indicate how many levels supported */ - platform_info = rdmsr(MSR_PLATFORM_INFO); - return (platform_info.hi >> 1) & 3; -} - -/* - * Configure processor power limits if possible - * This must be done AFTER set of BIOS_RESET_CPL - */ -void set_power_limits(u8 power_limit_1_time) -{ - msr_t msr = rdmsr(MSR_PLATFORM_INFO); - msr_t limit; - unsigned power_unit; - unsigned tdp, min_power, max_power, max_time; - u8 power_limit_1_val; - - if (power_limit_1_time >= ARRAY_SIZE(power_limit_time_sec_to_msr)) - return; - - if (!(msr.lo & PLATFORM_INFO_SET_TDP)) - return; - - /* Get units */ - msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); - power_unit = 2 << ((msr.lo & 0xf) - 1); - - /* Get power defaults for this SKU */ - msr = rdmsr(MSR_PKG_POWER_SKU); - tdp = msr.lo & 0x7fff; - min_power = (msr.lo >> 16) & 0x7fff; - max_power = msr.hi & 0x7fff; - max_time = (msr.hi >> 16) & 0x7f; - - printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit); - - if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) - power_limit_1_time = power_limit_time_msr_to_sec[max_time]; - - if (min_power > 0 && tdp < min_power) - tdp = min_power; - - if (max_power > 0 && tdp > max_power) - tdp = max_power; - - power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; - - /* Set long term power limit to TDP */ - limit.lo = 0; - limit.lo |= tdp & PKG_POWER_LIMIT_MASK; - limit.lo |= PKG_POWER_LIMIT_EN; - limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << - PKG_POWER_LIMIT_TIME_SHIFT; - - /* Set short term power limit to 1.25 * TDP */ - limit.hi = 0; - limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK; - limit.hi |= PKG_POWER_LIMIT_EN; - /* Power limit 2 time is only programmable on SNB EP/EX */ - - wrmsr(MSR_PKG_POWER_LIMIT, limit); - - /* Use nominal TDP values for CPUs with configurable TDP */ - if (cpu_config_tdp_levels()) { - msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); - limit.hi = 0; - limit.lo = msr.lo & 0xff; - wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit); - } -} - -static void configure_misc(void) -{ - msr_t msr; - - msr = rdmsr(IA32_MISC_ENABLE); - msr.lo |= (1 << 0); /* Fast String enable */ - msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ - msr.lo |= (1 << 16); /* Enhanced SpeedStep Enable */ - wrmsr(IA32_MISC_ENABLE, msr); - - /* Disable Thermal interrupts */ - msr.lo = 0; - msr.hi = 0; - wrmsr(IA32_THERM_INTERRUPT, msr); - - /* Enable package critical interrupt only */ - msr.lo = 1 << 4; - msr.hi = 0; - wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr); -} - -static void enable_lapic_tpr(void) -{ - msr_t msr; - - msr = rdmsr(MSR_PIC_MSG_CONTROL); - msr.lo &= ~(1 << 10); /* Enable APIC TPR updates */ - wrmsr(MSR_PIC_MSG_CONTROL, msr); -} - -static void configure_dca_cap(void) -{ - struct cpuid_result cpuid_regs; - msr_t msr; - - /* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */ - cpuid_regs = cpuid(1); - if (cpuid_regs.ecx & (1 << 18)) { - msr = rdmsr(IA32_PLATFORM_DCA_CAP); - msr.lo |= 1; - wrmsr(IA32_PLATFORM_DCA_CAP, msr); - } -} - -static void set_max_ratio(void) -{ - msr_t msr, perf_ctl; - - perf_ctl.hi = 0; - - /* Check for configurable TDP option */ - if (cpu_config_tdp_levels()) { - /* Set to nominal TDP ratio */ - msr = rdmsr(MSR_CONFIG_TDP_NOMINAL); - perf_ctl.lo = (msr.lo & 0xff) << 8; - } else { - /* Platform Info bits 15:8 give max ratio */ - msr = rdmsr(MSR_PLATFORM_INFO); - perf_ctl.lo = msr.lo & 0xff00; - } - wrmsr(IA32_PERF_CTL, perf_ctl); - - printk(BIOS_DEBUG, "model_x06ax: frequency set to %d\n", - ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK); -} - -static void configure_mca(void) -{ - msr_t msr; - int i; - - msr.lo = msr.hi = 0; - /* This should only be done on a cold boot */ - for (i = 0; i < 7; i++) - wrmsr(IA32_MC0_STATUS + (i * 4), msr); -} - -int cpu_get_apic_id_map(int *apic_id_map) -{ - struct cpuid_result result; - unsigned threads_per_package, threads_per_core, i, shift = 0; - - /* Logical processors (threads) per core */ - result = cpuid_ext(0xb, 0); - threads_per_core = result.ebx & 0xffff; - - /* Logical processors (threads) per package */ - result = cpuid_ext(0xb, 1); - threads_per_package = result.ebx & 0xffff; - - if (threads_per_core == 1) - shift++; - - for (i = 0; i < threads_per_package && i < CONFIG_MAX_CPUS; i++) - apic_id_map[i] = i << shift; - - return threads_per_package; -} - -/* - * Initialize any extra cores/threads in this package. - */ -static void intel_cores_init(struct device *cpu) -{ - struct cpuid_result result; - unsigned threads_per_package, threads_per_core, i; - - /* Logical processors (threads) per core */ - result = cpuid_ext(0xb, 0); - threads_per_core = result.ebx & 0xffff; - - /* Logical processors (threads) per package */ - result = cpuid_ext(0xb, 1); - threads_per_package = result.ebx & 0xffff; - - /* Only initialize extra cores from BSP */ - if (cpu->path.apic.apic_id) - return; - - printk(BIOS_DEBUG, "CPU: %u has %u cores, %u threads per core\n", - cpu->path.apic.apic_id, threads_per_package/threads_per_core, - threads_per_core); - - for (i = 1; i < threads_per_package; ++i) { - struct device_path cpu_path; - struct device *new; - - /* Build the cpu device path */ - cpu_path.type = DEVICE_PATH_APIC; - cpu_path.apic.apic_id = - cpu->path.apic.apic_id + i; - - /* Update APIC ID if no hyperthreading */ - if (threads_per_core == 1) - cpu_path.apic.apic_id <<= 1; - - /* Allocate the new cpu device structure */ - new = alloc_dev(cpu->bus, &cpu_path); - if (!new) - continue; - - printk(BIOS_DEBUG, "CPU: %u has core %u\n", - cpu->path.apic.apic_id, - new->path.apic.apic_id); - -#if CONFIG_SMP && CONFIG_MAX_CPUS > 1 - /* Start the new cpu */ - if (!start_cpu(new)) { - /* Record the error in cpu? */ - printk(BIOS_ERR, "CPU %u would not start!\n", - new->path.apic.apic_id); - } -#endif - } -} - -static void model_206ax_init(struct device *cpu) -{ - char processor_name[49]; - struct cpuid_result cpuid_regs; - - /* Turn on caching if we haven't already */ - x86_enable_cache(); - - /* Clear out pending MCEs */ - configure_mca(); - - /* Print processor name */ - fill_processor_name(processor_name); - printk(BIOS_INFO, "CPU: %s.\n", processor_name); - - /* Setup MTRRs based on physical address size */ - cpuid_regs = cpuid(0x80000008); - x86_setup_fixed_mtrrs(); - x86_setup_var_mtrrs(cpuid_regs.eax & 0xff, 2); - x86_mtrr_check(); - - /* Setup Page Attribute Tables (PAT) */ - // TODO set up PAT - - /* Enable the local cpu apics */ - enable_lapic_tpr(); - setup_lapic(); - - /* Enable virtualization if Kconfig option is set */ - enable_vmx(); - - /* Configure Enhanced SpeedStep and Thermal Sensors */ - configure_misc(); - - /* Enable Direct Cache Access */ - configure_dca_cap(); - - /* Set Max Ratio */ - set_max_ratio(); - - /* Enable Turbo */ - enable_turbo(); - - /* Start up extra cores */ - intel_cores_init(cpu); -} - -static struct device_operations cpu_dev_ops = { - .init = model_206ax_init, -}; - -static struct cpu_device_id cpu_table[] = { - { X86_VENDOR_INTEL, 0x206a0 }, /* Intel Sandybridge */ - { X86_VENDOR_INTEL, 0x206a6 }, /* Intel Sandybridge D1 */ - { X86_VENDOR_INTEL, 0x206a7 }, /* Intel Sandybridge D2/J1 */ - { X86_VENDOR_INTEL, 0x306a0 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a2 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a4 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a5 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a6 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a8 }, /* Intel IvyBridge */ - { X86_VENDOR_INTEL, 0x306a9 }, /* Intel IvyBridge */ - { 0, 0 }, -}; - -static const struct cpu_driver driver __cpu_driver = { - .ops = &cpu_dev_ops, - .id_table = cpu_table, -}; diff --git a/src/mainboard/intel/cougar_canyon2/Kconfig b/src/mainboard/intel/cougar_canyon2/Kconfig deleted file mode 100644 index 0432a53f4a..0000000000 --- a/src/mainboard/intel/cougar_canyon2/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_INTEL_COUGAR_CANYON2 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_INTEL_SOCKET_RPGA989 - select NORTHBRIDGE_INTEL_FSP_IVYBRIDGE - select SOUTHBRIDGE_INTEL_FSP_BD82X6X - select BOARD_ROMSIZE_KB_8192 - select HAVE_ACPI_TABLES - select HAVE_OPTION_TABLE - select MMCONF_SUPPORT - select SUPERIO_SMSC_SIO1007 - select ENABLE_VMX - select INTEL_INT15 - select VGA - -config MAINBOARD_DIR - string - default intel/cougar_canyon2 - -config MAINBOARD_PART_NUMBER - string - default "Cougar Canyon 2" - -config MMCONF_BASE_ADDRESS - hex - default 0xf8000000 # set to match FSP - -config MAX_CPUS - int - default 16 - -config SMBIOS_SYSTEM_ENCLOSURE_TYPE - hex - default 0x09 # This is a mobile platform - -config UDELAY_LAPIC_FIXED_FSB - int - default 100 - -config VIRTUAL_ROM_SIZE - hex - default 0x1000000 - -if HAVE_FSP_BIN - -config VGA_BIOS - bool - default y - -config VGA_BIOS_FILE - string - default "../intel/mainboard/intel/cougar_canyon2/vbios/snm_2170.dat" - -config VGA_BIOS_ID - string - default "8086,0166" - - -endif # HAVE_FSP_BIN - -endif # BOARD_INTEL_COUGAR_CANYON2 diff --git a/src/mainboard/intel/cougar_canyon2/Kconfig.name b/src/mainboard/intel/cougar_canyon2/Kconfig.name deleted file mode 100644 index b2c8c1cb75..0000000000 --- a/src/mainboard/intel/cougar_canyon2/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_INTEL_COUGAR_CANYON2 - bool "Cougar Canyon 2 CRB" diff --git a/src/mainboard/intel/cougar_canyon2/acpi/ec.asl b/src/mainboard/intel/cougar_canyon2/acpi/ec.asl deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl b/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl deleted file mode 100644 index d0a5dc6691..0000000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/hostbridge_pci_irqs.asl +++ /dev/null @@ -1,99 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* This is board specific information: IRQ routing for Sandybridge */ - -// PCI Interrupt Routing -Method(_PRT) -{ - If (PICM) { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, 0, 16 }, - - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, 0, 19 }, - - // Network 0:19.0 - Package() { 0x0019ffff, 0, 0, 20 }, - - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, 0, 21 }, - - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, 0, 22 }, - - /* MEI */ - Package() { 0x0016ffff, 0, 0, 16 }, - Package() { 0x0016ffff, 1, 0, 17 }, - - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, 0, 16 }, - Package() { 0x001cffff, 1, 0, 17 }, - Package() { 0x001cffff, 2, 0, 18 }, - Package() { 0x001cffff, 3, 0, 19 }, - - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, 0, 23 }, - - // LPC devices 0:1f.0 - Package() { 0x001fffff, 0, 0, 16 }, - Package() { 0x001fffff, 1, 0, 19 }, - Package() { 0x001fffff, 2, 0, 18 }, - Package() { 0x001fffff, 3, 0, 16 }, - }) - } Else { - Return (Package() { - // Onboard graphics (IGD) 0:2.0 - Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - - // XHCI 0:14.0 - Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - - // EHCI #2 0:19.0 - Package() { 0x0019ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 }, - - // EHCI #2 0:1a.0 - Package() { 0x001affff, 0, \_SB.PCI0.LPCB.LNKF, 0 }, - - // High Definition Audio 0:1b.0 - Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 }, - - /* Management Engine Interface */ - Package() { 0x0016ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0016ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - - // PCIe Root Ports 0:1c.x - Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 }, - - // EHCI #1 0:1d.0 - Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKH, 0 }, - - // LPC device 0:1f.0 - Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 }, - }) - } -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl b/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl deleted file mode 100644 index a55894c5d7..0000000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/mainboard.asl +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Device (PWRB) -{ - Name(_HID, EisaId("PNP0C0C")) - - // Wake - Name(_PRW, Package(){0x1d, 0x05}) -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/platform.asl b/src/mainboard/intel/cougar_canyon2/acpi/platform.asl deleted file mode 100644 index 210dca6adf..0000000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/platform.asl +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* The _PTS method (Prepare To Sleep) is called before the OS is - * entering a sleep state. The sleep state number is passed in Arg0 - */ - -Method(_PTS,1) -{ - // NVS has a flag to determine USB policy in S3 - if (S3U0) { - Store (One, GP47) // Enable USB0 - } Else { - Store (Zero, GP47) // Disable USB0 - } - - // NVS has a flag to determine USB policy in S3 - if (S3U1) { - Store (One, GP56) // Enable USB1 - } Else { - Store (Zero, GP56) // Disable USB1 - } -} - -/* The _WAK method is called on system wakeup */ - -Method(_WAK,1) -{ - Return(Package(){0,0}) -} diff --git a/src/mainboard/intel/cougar_canyon2/acpi/superio.asl b/src/mainboard/intel/cougar_canyon2/acpi/superio.asl deleted file mode 100644 index 62103ce6df..0000000000 --- a/src/mainboard/intel/cougar_canyon2/acpi/superio.asl +++ /dev/null @@ -1,35 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Values should match those defined in devicetree.cb */ - -#undef SIO_ENABLE_FDC0 // pnp 2e.0: Disable Floppy Controller -#undef SIO_ENABLE_INFR // pnp 2e.a: Disable Consumer IR - -#define SIO_ENABLE_PS2K // pnp 2e.5: Enable PS/2 Keyboard -#define SIO_ENABLE_PS2M // pnp 2e.6: Enable PS/2 Mouse -#define SIO_ENABLE_COM1 // pnp 2e.1: Enable Serial Port 1 -#define SIO_ENABLE_ENVC // pnp 2e.4: Enable Environmental Controller -#define SIO_ENVC_IO0 0x700 // pnp 2e.4: io 0x60 -#define SIO_ENVC_IO1 0x710 // pnp 2e.4: io 0x62 -#define SIO_ENABLE_GPIO // pnp 2e.7: Enable GPIO -#define SIO_GPIO_IO0 0x720 // pnp 2e.7: io 0x60 -#define SIO_GPIO_IO1 0x730 // pnp 2e.7: io 0x60 - -#include "superio/smsc/sio1007/acpi/superio.asl" diff --git a/src/mainboard/intel/cougar_canyon2/acpi_tables.c b/src/mainboard/intel/cougar_canyon2/acpi_tables.c deleted file mode 100644 index fce84fefde..0000000000 --- a/src/mainboard/intel/cougar_canyon2/acpi_tables.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "southbridge/intel/fsp_bd82x6x/nvs.h" -#include "thermal.h" - -static global_nvs_t *gnvs_; - -static void acpi_update_thermal_table(global_nvs_t *gnvs) -{ - gnvs->tcrt = CRITICAL_TEMPERATURE; - gnvs->tpsv = PASSIVE_TEMPERATURE; - gnvs->tmax = MAX_TEMPERATURE; - gnvs->flvl = 5; -} - -void acpi_create_gnvs(global_nvs_t *gnvs) -{ - gnvs_ = gnvs; - memset((void *)gnvs, 0, sizeof(*gnvs)); - gnvs->apic = 1; - gnvs->mpen = 1; /* Enable Multi Processing */ - gnvs->pcnt = dev_count_cpu(); - - /* Enable USB ports in S3 */ - gnvs->s3u0 = 1; - gnvs->s3u1 = 1; - - /* - * Enable Front USB ports in S5 by default - * to be consistent with back port behavior - */ - gnvs->s5u0 = 1; - gnvs->s5u1 = 1; - - acpi_update_thermal_table(gnvs); -} - -unsigned long acpi_fill_madt(unsigned long current) -{ - /* Local APICs */ - current = acpi_create_madt_lapics(current); - - /* IOAPIC */ - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, - 2, IO_APIC_ADDR, 0); - - /* INT_SRC_OVR */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 0, 2, 0); - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH); - - return current; -} diff --git a/src/mainboard/intel/cougar_canyon2/board_info.txt b/src/mainboard/intel/cougar_canyon2/board_info.txt deleted file mode 100644 index b89835dfc8..0000000000 --- a/src/mainboard/intel/cougar_canyon2/board_info.txt +++ /dev/null @@ -1,2 +0,0 @@ -Category: eval -Release year: 2010 diff --git a/src/mainboard/intel/cougar_canyon2/cmos.layout b/src/mainboard/intel/cougar_canyon2/cmos.layout deleted file mode 100644 index 0c391ecff2..0000000000 --- a/src/mainboard/intel/cougar_canyon2/cmos.layout +++ /dev/null @@ -1,118 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007-2008 coresystems GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -# ----------------------------------------------------------------- -entries - -# ----------------------------------------------------------------- -# Status Register A -# ----------------------------------------------------------------- -# Status Register B -# ----------------------------------------------------------------- -# Status Register C -#96 4 r 0 status_c_rsvd -#100 1 r 0 uf_flag -#101 1 r 0 af_flag -#102 1 r 0 pf_flag -#103 1 r 0 irqf_flag -# ----------------------------------------------------------------- -# Status Register D -#104 7 r 0 status_d_rsvd -#111 1 r 0 valid_cmos_ram -# ----------------------------------------------------------------- -# Diagnostic Status Register -#112 8 r 0 diag_rsvd1 - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory -#120 264 r 0 unused - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 4 boot_option -385 1 e 4 last_boot -388 4 r 0 reboot_bits -#390 2 r 0 unused? - -# ----------------------------------------------------------------- -# coreboot config options: console -392 3 e 5 baud_rate -395 4 e 6 debug_level -#399 1 r 0 unused - -# coreboot config options: cpu -400 1 e 2 hyper_threading -#401 7 r 0 unused - -# coreboot config options: southbridge -408 1 e 1 nmi -409 2 e 7 power_on_after_fail -411 1 e 8 sata_mode -#412 4 r 0 unused - -# coreboot config options: bootloader -#Used by ChromeOS: -416 128 r 0 vbnv -#544 440 r 0 unused - -# SandyBridge MRC Scrambler Seed values -896 32 r 0 mrc_scrambler_seed -928 32 r 0 mrc_scrambler_seed_s3 - -# coreboot config options: check sums -984 16 h 0 check_sum -#1000 24 r 0 amd_reserved - -# ----------------------------------------------------------------- - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -5 0 115200 -5 1 57600 -5 2 38400 -5 3 19200 -5 4 9600 -5 5 4800 -5 6 2400 -5 7 1200 -6 1 Emergency -6 2 Alert -6 3 Critical -6 4 Error -6 5 Warning -6 6 Notice -6 7 Info -6 8 Debug -6 9 Spew -7 0 Disable -7 1 Enable -7 2 Keep -8 0 AHCI -8 1 Compatible -# ----------------------------------------------------------------- -checksums - -checksum 392 415 984 diff --git a/src/mainboard/intel/cougar_canyon2/devicetree.cb b/src/mainboard/intel/cougar_canyon2/devicetree.cb deleted file mode 100644 index d7c6aabd4e..0000000000 --- a/src/mainboard/intel/cougar_canyon2/devicetree.cb +++ /dev/null @@ -1,70 +0,0 @@ -chip northbridge/intel/fsp_sandybridge - # IGD Displays - register "gfx.ndid" = "3" - register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" - - # Enable DisplayPort 1 Hotplug with 6ms pulse - register "gpu_dp_d_hotplug" = "0x06" - - # Enable DisplayPort 0 Hotplug with 6ms pulse - register "gpu_dp_c_hotplug" = "0x06" - - # Enable DVI Hotplug with 6ms pulse - register "gpu_dp_b_hotplug" = "0x06" - - device cpu_cluster 0 on - chip cpu/intel/socket_rPGA989 - device lapic 0 on end - end - chip cpu/intel/fsp_model_206ax - # Magic APIC ID to locate this chip - device lapic 0xACAC off end - - register "c1_battery" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_battery" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7) - - register "c1_acpower" = "3" # ACPI(C1) = MWAIT(C3) - register "c2_acpower" = "4" # ACPI(C2) = MWAIT(C6) - register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7) - end - end - - device domain 0 on - device pci 00.0 on end # host bridge - device pci 02.0 on end # vga controller - - chip southbridge/intel/fsp_bd82x6x # Intel Series 6 Cougar Point PCH - register "sata_port_map" = "0x3f" - - register "c2_latency" = "1" - register "p_cnt_throttling_supported" = "0" - - device pci 14.0 on end # XHCI - device pci 16.0 on end # Management Engine Interface 1 - device pci 16.1 on end # Management Engine Interface 2 - device pci 16.2 off end # Management Engine IDE-R - device pci 16.3 off end # Management Engine KT - device pci 19.0 on end # Intel Gigabit Ethernet - device pci 1a.0 on end # USB2 EHCI #2 - device pci 1b.0 off end # High Definition Audio - device pci 1c.0 on end # PCIe Port #1 - device pci 1c.1 on end # PCIe Port #2 - device pci 1c.2 on end # PCIe Port #3 - device pci 1c.3 on end # PCIe Port #4 - device pci 1c.4 on end # PCIe Port #5 - device pci 1c.5 on end # PCIe Port #6 - device pci 1c.6 on end # PCIe Port #7 - device pci 1c.7 on end # PCIe Port #8 - device pci 1d.0 on end # USB2 EHCI #1 - device pci 1e.0 off end # PCI bridge - device pci 1f.0 on # LPC bridge - # TODO: insert SIO UART and WDT - end - device pci 1f.2 on end # SATA Controller 1 - device pci 1f.3 on end # SMBus - device pci 1f.5 on end # SATA Controller 2 - device pci 1f.6 on end # Thermal - end - end -end diff --git a/src/mainboard/intel/cougar_canyon2/dsdt.asl b/src/mainboard/intel/cougar_canyon2/dsdt.asl deleted file mode 100644 index 82d6ee5076..0000000000 --- a/src/mainboard/intel/cougar_canyon2/dsdt.asl +++ /dev/null @@ -1,53 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -DefinitionBlock( - "dsdt.aml", - "DSDT", - 0x02, // DSDT revision: ACPI v2.0 - "COREv4", // OEM id - "COREBOOT", // OEM table id - 0x20110725 // OEM revision -) -{ - #include - - // Some generic macros - #include "acpi/platform.asl" - - // global NVS and variables - #include - - // General Purpose Events - //#include "acpi/gpe.asl" - - #include - - Scope (\_SB) { - Device (PCI0) - { - #include - #include - } - } - - /* Chipset specific sleep states */ - #include -} diff --git a/src/mainboard/intel/cougar_canyon2/gpio.h b/src/mainboard/intel/cougar_canyon2/gpio.h deleted file mode 100644 index 61cc88bdd7..0000000000 --- a/src/mainboard/intel/cougar_canyon2/gpio.h +++ /dev/null @@ -1,308 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef MAINBOARD_GPIO_H -#define MAINBOARD_GPIO_H - -#include "southbridge/intel/fsp_bd82x6x/gpio.h" - -const struct pch_gpio_set1 pch_gpio_set1_mode = { - .gpio0 = GPIO_MODE_GPIO, /* SINAI */ - .gpio1 = GPIO_MODE_GPIO, /* SMC_SMI */ - .gpio2 = GPIO_MODE_GPIO, /* PIRQE# */ - .gpio3 = GPIO_MODE_GPIO, /* PIRQF# */ - .gpio4 = GPIO_MODE_GPIO, /* PIRQG# */ - .gpio5 = GPIO_MODE_GPIO, /* PIRQH# */ - .gpio6 = GPIO_MODE_GPIO, /* DGPU_HPD_INTR*/ - .gpio7 = GPIO_MODE_GPIO, /* SMC_SCI# */ - .gpio8 = GPIO_MODE_NONE, /* NOT USED */ - .gpio9 = GPIO_MODE_NATIVE, /* USB OC10-11*/ - .gpio10 = GPIO_MODE_NATIVE, /* USB OC12-13 */ - .gpio11 = GPIO_MODE_GPIO, /* SMB_ALERT*/ - .gpio12 = GPIO_MODE_NATIVE, /* LAN DISABLE */ - .gpio13 = GPIO_MODE_NATIVE, /* HDA_DOCK_RST */ - .gpio14 = GPIO_MODE_GPIO, /* SMC_WAKE */ - .gpio15 = GPIO_MODE_GPIO, /* HOST ALERT */ - .gpio16 = GPIO_MODE_NATIVE, /* SATA4GP */ - .gpio17 = GPIO_MODE_GPIO, /* DGPU POWEROK */ - .gpio18 = GPIO_MODE_NATIVE, /* PCIECLKRQ1# */ - .gpio19 = GPIO_MODE_NATIVE, /* BBS0 */ - .gpio20 = GPIO_MODE_NATIVE, /* CIECLKRQ2# */ - .gpio21 = GPIO_MODE_NATIVE, /* SATA0GP */ - .gpio22 = GPIO_MODE_GPIO, /* BIOS Recovery */ - .gpio23 = GPIO_MODE_NATIVE, /* LDRQ1 */ - .gpio24 = GPIO_MODE_NONE, /* HOST ALERT */ - .gpio25 = GPIO_MODE_NATIVE, /* PCIECLKRQ3# */ - .gpio26 = GPIO_MODE_NATIVE, /* PCIECLKRQ4# */ - .gpio27 = GPIO_MODE_GPIO, /* SATA0 PWR EN */ - .gpio28 = GPIO_MODE_GPIO, /* PLL ODVR */ - .gpio29 = GPIO_MODE_GPIO, /* SLP_LAN# */ - .gpio30 = GPIO_MODE_NATIVE, /* SUS_WARN# */ - .gpio31 = GPIO_MODE_NATIVE, /* ACPRESENT */ -}; - -const struct pch_gpio_set1 pch_gpio_set1_direction = { - .gpio0 = GPIO_DIR_INPUT, - .gpio1 = GPIO_DIR_INPUT, - .gpio2 = GPIO_DIR_INPUT, - .gpio3 = GPIO_DIR_INPUT, - .gpio4 = GPIO_DIR_INPUT, - .gpio5 = GPIO_DIR_INPUT, - .gpio6 = GPIO_DIR_INPUT, - .gpio7 = GPIO_DIR_INPUT, - .gpio8 = GPIO_DIR_OUTPUT, - .gpio9 = GPIO_DIR_INPUT, - .gpio10 = GPIO_DIR_INPUT, - .gpio11 = GPIO_DIR_INPUT, - .gpio12 = GPIO_DIR_OUTPUT, - .gpio13 = GPIO_DIR_OUTPUT, - .gpio14 = GPIO_DIR_INPUT, - .gpio15 = GPIO_DIR_INPUT, - .gpio16 = GPIO_DIR_INPUT, - .gpio17 = GPIO_DIR_INPUT, - .gpio18 = GPIO_DIR_INPUT, - .gpio19 = GPIO_DIR_INPUT, - .gpio20 = GPIO_DIR_INPUT, - .gpio21 = GPIO_DIR_INPUT, - .gpio22 = GPIO_DIR_INPUT, - .gpio23 = GPIO_DIR_INPUT, - .gpio24 = GPIO_DIR_OUTPUT, - .gpio25 = GPIO_DIR_INPUT, - .gpio26 = GPIO_DIR_INPUT, - .gpio27 = GPIO_DIR_OUTPUT, - .gpio28 = GPIO_DIR_OUTPUT, - .gpio29 = GPIO_DIR_OUTPUT, - .gpio30 = GPIO_DIR_OUTPUT, - .gpio31 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set1 pch_gpio_set1_level = { - .gpio0 = GPIO_LEVEL_LOW, - .gpio1 = GPIO_LEVEL_HIGH, - .gpio2 = GPIO_LEVEL_HIGH, - .gpio3 = GPIO_LEVEL_HIGH, - .gpio4 = GPIO_LEVEL_LOW, - .gpio5 = GPIO_LEVEL_LOW, - .gpio6 = GPIO_LEVEL_HIGH, - .gpio7 = GPIO_LEVEL_HIGH, - .gpio8 = GPIO_LEVEL_HIGH, - .gpio9 = GPIO_LEVEL_HIGH, - .gpio10 = GPIO_LEVEL_HIGH, - .gpio11 = GPIO_LEVEL_HIGH, - .gpio12 = GPIO_LEVEL_HIGH, - .gpio13 = GPIO_LEVEL_LOW, - .gpio14 = GPIO_LEVEL_HIGH, - .gpio15 = GPIO_LEVEL_HIGH, - .gpio16 = GPIO_LEVEL_LOW, - .gpio17 = GPIO_LEVEL_LOW, - .gpio18 = GPIO_LEVEL_HIGH, - .gpio19 = GPIO_LEVEL_HIGH, - .gpio20 = GPIO_LEVEL_HIGH, - .gpio21 = GPIO_LEVEL_LOW, - .gpio22 = GPIO_LEVEL_HIGH, - .gpio23 = GPIO_LEVEL_HIGH, - .gpio24 = GPIO_LEVEL_LOW, - .gpio25 = GPIO_LEVEL_HIGH, - .gpio26 = GPIO_LEVEL_HIGH, - .gpio27 = GPIO_LEVEL_LOW, - .gpio28 = GPIO_LEVEL_LOW, - .gpio29 = GPIO_LEVEL_HIGH, - .gpio30 = GPIO_LEVEL_HIGH, - .gpio31 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set1 pch_gpio_set1_invert = { - .gpio1 = GPIO_INVERT, - .gpio3 = GPIO_INVERT, - .gpio7 = GPIO_INVERT, - .gpio14 = GPIO_INVERT, - .gpio15 = GPIO_INVERT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_mode = { - .gpio32 = GPIO_MODE_NATIVE, /* SIO CLKREQ */ - .gpio33 = GPIO_MODE_NATIVE, /* DOCK ENABLE*/ - .gpio34 = GPIO_MODE_GPIO, /* STP PCI LED */ - .gpio35 = GPIO_MODE_NATIVE, /* SATA POWER EN */ - .gpio36 = GPIO_MODE_NATIVE, /* SATA2 PRESENT DET */ - .gpio37 = GPIO_MODE_NONE, /* NOT USED */ - .gpio38 = GPIO_MODE_GPIO, /* MFG MODE */ - .gpio39 = GPIO_MODE_GPIO, /* GP39 GFX CRB DET */ - .gpio40 = GPIO_MODE_NATIVE, /* USB OC 2-3 */ - .gpio41 = GPIO_MODE_NATIVE, /* USB OC 4-5 */ - .gpio42 = GPIO_MODE_NATIVE, /* USB OC 6-7 */ - .gpio43 = GPIO_MODE_NATIVE, /* USB OC 8-9 */ - .gpio44 = GPIO_MODE_NATIVE, /* PCI SLOT5 CLKREQ5 */ - .gpio45 = GPIO_MODE_NATIVE, /* LAN CLKREQ6 */ - .gpio46 = GPIO_MODE_GPIO, /* PCI SLOT5 CLKREQ5 */ - .gpio47 = GPIO_MODE_NATIVE, /* PEG CLKREQ7 */ - .gpio48 = GPIO_MODE_GPIO, /* SV_ADVANCE_GP48 */ - .gpio49 = GPIO_MODE_GPIO, /* CRIT_TEMP */ - .gpio50 = GPIO_MODE_GPIO, /* DGPU RESET */ - .gpio51 = GPIO_MODE_NONE, /* NOT USED */ - .gpio52 = GPIO_MODE_GPIO, /* DGPU SEL */ - .gpio53 = GPIO_MODE_GPIO, /* DGPU PWM SEL */ - .gpio54 = GPIO_MODE_GPIO, /* DGPU PWM EN */ - .gpio55 = GPIO_MODE_NONE, /* NOT USED */ - .gpio56 = GPIO_MODE_NATIVE, /* NOT USED */ - .gpio57 = GPIO_MODE_NATIVE, /* GP57_SV_DETECT */ - .gpio58 = GPIO_MODE_NATIVE, /* SML1CLK_PCH */ - .gpio59 = GPIO_MODE_NATIVE, /* USB OC 0-1 */ - .gpio60 = GPIO_MODE_GPIO, /* DDR RST CTRL */ - .gpio61 = GPIO_MODE_NATIVE, /* LPC SUSTAT */ - .gpio62 = GPIO_MODE_NATIVE, /* LPC SUSCLK */ - .gpio63 = GPIO_MODE_NATIVE, /* SLP S5*/ - -}; - -const struct pch_gpio_set2 pch_gpio_set2_direction = { - .gpio32 = GPIO_DIR_INPUT, - .gpio33 = GPIO_DIR_OUTPUT, - .gpio34 = GPIO_DIR_OUTPUT, - .gpio35 = GPIO_DIR_OUTPUT, - .gpio36 = GPIO_DIR_INPUT, - .gpio37 = GPIO_DIR_OUTPUT, - .gpio38 = GPIO_DIR_INPUT, - .gpio39 = GPIO_DIR_INPUT, - .gpio40 = GPIO_DIR_INPUT, - .gpio41 = GPIO_DIR_INPUT, - .gpio42 = GPIO_DIR_INPUT, - .gpio43 = GPIO_DIR_INPUT, - .gpio44 = GPIO_DIR_INPUT, - .gpio45 = GPIO_DIR_INPUT, - .gpio46 = GPIO_DIR_OUTPUT, - .gpio47 = GPIO_DIR_INPUT, - .gpio48 = GPIO_DIR_INPUT, - .gpio49 = GPIO_DIR_INPUT, - .gpio50 = GPIO_DIR_OUTPUT, - .gpio51 = GPIO_DIR_OUTPUT, - .gpio52 = GPIO_DIR_OUTPUT, - .gpio53 = GPIO_DIR_OUTPUT, - .gpio54 = GPIO_DIR_OUTPUT, - .gpio55 = GPIO_DIR_OUTPUT, - .gpio56 = GPIO_DIR_INPUT, - .gpio57 = GPIO_DIR_INPUT, - .gpio58 = GPIO_DIR_INPUT, - .gpio59 = GPIO_DIR_INPUT, - .gpio60 = GPIO_DIR_OUTPUT, - .gpio61 = GPIO_DIR_OUTPUT, - .gpio62 = GPIO_DIR_OUTPUT, - .gpio63 = GPIO_DIR_OUTPUT, -}; - -const struct pch_gpio_set2 pch_gpio_set2_level = { - .gpio32 = GPIO_LEVEL_HIGH, - .gpio33 = GPIO_LEVEL_HIGH, - .gpio34 = GPIO_LEVEL_LOW, - .gpio35 = GPIO_LEVEL_LOW, - .gpio36 = GPIO_LEVEL_HIGH, - .gpio37 = GPIO_LEVEL_LOW, - .gpio38 = GPIO_LEVEL_HIGH, - .gpio39 = GPIO_LEVEL_LOW, - .gpio40 = GPIO_LEVEL_HIGH, - .gpio41 = GPIO_LEVEL_HIGH, - .gpio42 = GPIO_LEVEL_HIGH, - .gpio43 = GPIO_LEVEL_HIGH, - .gpio44 = GPIO_LEVEL_HIGH, - .gpio45 = GPIO_LEVEL_HIGH, - .gpio46 = GPIO_LEVEL_HIGH, - .gpio47 = GPIO_LEVEL_LOW, - .gpio48 = GPIO_LEVEL_HIGH, - .gpio49 = GPIO_LEVEL_HIGH, - .gpio50 = GPIO_LEVEL_HIGH, - .gpio51 = GPIO_LEVEL_HIGH, - .gpio52 = GPIO_LEVEL_HIGH, - .gpio53 = GPIO_LEVEL_HIGH, - .gpio54 = GPIO_LEVEL_HIGH, - .gpio55 = GPIO_LEVEL_LOW, - .gpio56 = GPIO_LEVEL_HIGH, - .gpio57 = GPIO_LEVEL_LOW, - .gpio58 = GPIO_LEVEL_HIGH, - .gpio59 = GPIO_LEVEL_HIGH, - .gpio60 = GPIO_LEVEL_HIGH, - .gpio61 = GPIO_LEVEL_HIGH, - .gpio62 = GPIO_LEVEL_HIGH, - .gpio63 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_set3 pch_gpio_set3_mode = { - .gpio64 = GPIO_MODE_NATIVE, /* CLK_FLEX0 */ - .gpio65 = GPIO_MODE_NATIVE, /* NOT USED / CLK_FLEX1 */ - .gpio66 = GPIO_MODE_GPIO, /* CLK_FLEX2 */ - .gpio67 = GPIO_MODE_GPIO, /* GPU PRSNT */ - .gpio68 = GPIO_MODE_GPIO, /* SATA PORT2 PWR EN*/ - .gpio69 = GPIO_MODE_GPIO, /* TESTMODE */ - .gpio70 = GPIO_MODE_NATIVE, /* USB3 SLOT 2DET */ - .gpio71 = GPIO_MODE_NATIVE, /* USB3 SLOT 1 DET */ - .gpio72 = GPIO_MODE_NATIVE, /* BATLOW# */ - .gpio73 = GPIO_MODE_NATIVE, /* PCIECLKRQ0#*/ - .gpio74 = GPIO_MODE_NATIVE, /* SML1ALERT# /PCHHOT# */ - .gpio75 = GPIO_MODE_NATIVE, /* SML1DATA */ -}; - -const struct pch_gpio_set3 pch_gpio_set3_direction = { - .gpio64 = GPIO_DIR_OUTPUT, - .gpio65 = GPIO_DIR_OUTPUT, - .gpio66 = GPIO_DIR_OUTPUT, - .gpio67 = GPIO_DIR_INPUT, - .gpio68 = GPIO_DIR_OUTPUT, - .gpio69 = GPIO_DIR_INPUT, - .gpio70 = GPIO_DIR_INPUT, - .gpio71 = GPIO_DIR_INPUT, - .gpio72 = GPIO_DIR_INPUT, - .gpio73 = GPIO_DIR_INPUT, - .gpio74 = GPIO_DIR_INPUT, - .gpio75 = GPIO_DIR_INPUT, -}; - -const struct pch_gpio_set3 pch_gpio_set3_level = { - .gpio64 = GPIO_LEVEL_HIGH, - .gpio65 = GPIO_LEVEL_HIGH, - .gpio66 = GPIO_LEVEL_LOW, - .gpio67 = GPIO_LEVEL_HIGH, - .gpio68 = GPIO_LEVEL_HIGH, - .gpio69 = GPIO_LEVEL_HIGH, - .gpio70 = GPIO_LEVEL_HIGH, - .gpio71 = GPIO_LEVEL_HIGH, - .gpio72 = GPIO_LEVEL_HIGH, - .gpio73 = GPIO_LEVEL_HIGH, - .gpio74 = GPIO_LEVEL_HIGH, - .gpio75 = GPIO_LEVEL_HIGH, -}; - -const struct pch_gpio_map gpio_map = { - .set1 = { - .mode = &pch_gpio_set1_mode, - .direction = &pch_gpio_set1_direction, - .level = &pch_gpio_set1_level, - .invert = &pch_gpio_set1_invert, - }, - .set2 = { - .mode = &pch_gpio_set2_mode, - .direction = &pch_gpio_set2_direction, - .level = &pch_gpio_set2_level, - }, - .set3 = { - .mode = &pch_gpio_set3_mode, - .direction = &pch_gpio_set3_direction, - .level = &pch_gpio_set3_level, - }, -}; -#endif diff --git a/src/mainboard/intel/cougar_canyon2/hda_verb.c b/src/mainboard/intel/cougar_canyon2/hda_verb.c deleted file mode 100644 index a110246622..0000000000 --- a/src/mainboard/intel/cougar_canyon2/hda_verb.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include - -const u32 cim_verb_data[] = { - /* coreboot specific header */ - 0x80862805, // Codec Vendor / Device ID: Intel CougarPoint HDMI - 0x80860101, // Subsystem ID - 0x00000004, // Number of jacks - - /* NID 0x01, HDA Codec Subsystem ID Verb Table: 0x80860101 */ - AZALIA_SUBVENDOR(0x0, 0x80860101), - - /* Pin Complex (NID 0x05) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x05, 0x18560010), - - /* Pin Complex (NID 0x06) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x06, 0x18560020), - - /* Pin Complex (NID 0x07) Digital Out at Int HDMI */ - AZALIA_PIN_CFG(0x3, 0x07, 0x18560030) -}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/intel/cougar_canyon2/mainboard.c b/src/mainboard/intel/cougar_canyon2/mainboard.c deleted file mode 100644 index 01febd6d84..0000000000 --- a/src/mainboard/intel/cougar_canyon2/mainboard.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) -void mainboard_suspend_resume(void) -{ - /* Call SMM finalize() handlers before resume */ - outb(0xcb, 0xb2); -} -#endif - - - -// mainboard_enable is executed as first thing after -// enumerate_buses(). - -static void mainboard_enable(device_t dev) -{ - install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0); -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; diff --git a/src/mainboard/intel/cougar_canyon2/mainboard_smi.c b/src/mainboard/intel/cougar_canyon2/mainboard_smi.c deleted file mode 100644 index 731a842ca4..0000000000 --- a/src/mainboard/intel/cougar_canyon2/mainboard_smi.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Change LED_POWER# (SIO GPIO 45) state based on sleep type. - * The IO address is hardcoded as we don't have device path in SMM. - */ -#define SIO_GPIO_BASE_SET4 (0x730 + 3) -#define SIO_GPIO_BLINK_GPIO45 0x25 -void mainboard_smi_sleep(u8 slp_typ) -{ - u8 reg8; - - switch (slp_typ) { - case SLP_TYP_S3: - case SLP_TYP_S4: - break; - - case SLP_TYP_S5: - /* Turn off LED */ - reg8 = inb(SIO_GPIO_BASE_SET4); - reg8 |= (1 << 5); - outb(reg8, SIO_GPIO_BASE_SET4); - break; - } -} - - -static int mainboard_finalized = 0; - -int mainboard_smi_apmc(u8 apmc) -{ - switch (apmc) { - case APM_CNT_FINALIZE: - if (mainboard_finalized) { - printk(BIOS_DEBUG, "SMI#: Already finalized\n"); - return 0; - } - - intel_me_finalize_smm(); - intel_pch_finalize_smm(); - intel_sandybridge_finalize_smm(); - intel_model_206ax_finalize_smm(); - - mainboard_finalized = 1; - break; - } - return 0; -} diff --git a/src/mainboard/intel/cougar_canyon2/romstage.c b/src/mainboard/intel/cougar_canyon2/romstage.c deleted file mode 100644 index 45da7d1fdf..0000000000 --- a/src/mainboard/intel/cougar_canyon2/romstage.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "gpio.h" -#include - -#define SIO_PORT 0x164e - -static inline void reset_system(void) -{ - hard_reset(); - halt(); -} - -static void pch_enable_lpc(void) -{ - device_t dev = PCH_LPC_DEV; - - /* Set COM1/COM2 decode range */ - pci_write_config16(dev, LPC_IO_DEC, 0x0010); - - /* Enable SuperIO + PS/2 Keyboard/Mouse */ - u16 lpc_config = CNF1_LPC_EN | CNF2_LPC_EN | KBC_LPC_EN; - pci_write_config16(dev, LPC_EN, lpc_config); - - /* Map 256 bytes at 0x1600 to the LPC bus. */ - pci_write_config32(dev, LPC_GEN1_DEC, 0xfc1601); - - /* Map a range for the runtime registers to the LPC bus. */ - pci_write_config32(dev, LPC_GEN2_DEC, 0xc0181); - - if (sio1007_enable_uart_at(SIO_PORT)) { - pci_write_config16(dev, LPC_EN, - lpc_config | COMA_LPC_EN); - } -} - -static void setup_sio_gpios(void) -{ - const u16 port = SIO_PORT; - const u16 runtime_port = 0x180; - - /* Turn on configuration mode. */ - outb(0x55, port); - - /* Set the GPIO direction, polarity, and type. */ - sio1007_setreg(port, 0x31, 1 << 0, 1 << 0); - sio1007_setreg(port, 0x32, 0 << 0, 1 << 0); - sio1007_setreg(port, 0x33, 0 << 0, 1 << 0); - - /* Set the base address for the runtime register block. */ - sio1007_setreg(port, 0x30, runtime_port >> 4, 0xff); - sio1007_setreg(port, 0x21, runtime_port >> 12, 0xff); - - /* Turn on address decoding for it. */ - sio1007_setreg(port, 0x3a, 1 << 1, 1 << 1); - - /* - * Enable the RS232 transiver. - * Set the value of GPIO 10 by changing GP1, bit 0. - */ - u8 byte; - byte = inb(runtime_port + 0xc); - byte |= (1 << 0); - outb(byte, runtime_port + 0xc); - - /* Turn off address decoding for it. */ - sio1007_setreg(port, 0x3a, 0 << 1, 1 << 1); - - /* Turn off configuration mode. */ - outb(0xaa, port); -} - -static void rcba_config(void) -{ - u32 reg32; - - /* - * GFX INTA -> PIRQA (MSI) - * D31IP_SIP SATA INTB -> PIRQD - * D31IP_SMIP SMBUS INTC -> PIRQC - * D31IP_SIP SATA2 INTB -> PIRQD - * D31IP_TTIP THRT INTC -> PIRQC - * D29IP_E1P EHCI1 INTA -> PIRQD - * D28IP_P1IP INTA -> PIRQD - * D28IP_P2IP INTB -> PIRQC - * D28IP_P3IP INTC -> PIRQB - * D28IP_P4IP INTD -> PIRQA - * D28IP_P5IP INTA -> PIRQD - * D28IP_P6IP INTB -> PIRQC - * D28IP_P7IP INTC -> PIRQB - * D28IP_P8IP INTD -> PIRQA - * D27IP_ZIP HDA INTA -> PIRQD - * D26IP_E2P EHCI2 INTA -> PIRQD - * D20IP_XHCI XHCI INTA -> PIRQD (MSI) - */ - - /* Device interrupt pin register (board specific) */ - RCBA32(D31IP) = (INTC << D31IP_TTIP) | (INTB << D31IP_SIP2) | - (INTC << D31IP_SMIP) | (INTB << D31IP_SIP); - RCBA32(D29IP) = (INTA << D29IP_E1P); - RCBA32(D28IP) = (INTD << D28IP_P8IP) | (INTC << D28IP_P7IP) | - (INTB << D28IP_P6IP) | (INTA << D28IP_P5IP) | - (INTD << D28IP_P4IP) | (INTC << D28IP_P3IP) | - (INTB << D28IP_P2IP) | (INTA << D28IP_P1IP); - RCBA32(D27IP) = (INTA << D27IP_ZIP); - RCBA32(D26IP) = (INTA << D26IP_E2P); - RCBA32(D25IP) = (INTA << D25IP_LIP); - RCBA32(D22IP) = (INTB << D22IP_KTIP) | (INTC << D22IP_IDERIP) | - (INTB << D22IP_MEI2IP) | (INTA << D22IP_MEI1IP); - RCBA32(D20IP) = (INTA << D20IP_XHCIIP); - - /* Device interrupt route registers */ - DIR_ROUTE(D31IR, PIRQA, PIRQD, PIRQC, PIRQA); - DIR_ROUTE(D29IR, PIRQH, PIRQD, PIRQA, PIRQC); - DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D27IR, PIRQG, PIRQB, PIRQC, PIRQD); - DIR_ROUTE(D26IR, PIRQF, PIRQA, PIRQC, PIRQD); - DIR_ROUTE(D25IR, PIRQE, PIRQF, PIRQG, PIRQH); - DIR_ROUTE(D22IR, PIRQA, PIRQD, PIRQC, PIRQB); - DIR_ROUTE(D20IR, PIRQD, PIRQE, PIRQF, PIRQG); - - /* Enable IOAPIC (generic) */ - RCBA16(OIC) = 0x0100; - /* PCH BWG says to read back the IOAPIC enable register */ - (void) RCBA16(OIC); - - /* Disable unused devices (board specific) */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_ALWAYS; - RCBA32(FD) = reg32; -} - -void main(FSP_INFO_HEADER *fsp_info_header) -{ -#if IS_ENABLED(CONFIG_HAVE_ACPI_RESUME) - int boot_mode = 0; -#endif - u32 pm1_cnt; - u16 pm1_sts; - - post_code(0x40); - - timestamp_init(get_initial_timestamp()); - timestamp_add_now(TS_START_ROMSTAGE); - - pch_enable_lpc(); - - /* Enable GPIOs */ - pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE|1); - pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10); - setup_pch_gpios(&gpio_map); - setup_sio_gpios(); - - console_init(); - post_code(0x41); - - post_code(0x42); - sandybridge_sb_early_initialization(); - - post_code(0x43); - sandybridge_early_initialization(SANDYBRIDGE_MOBILE); - printk(BIOS_DEBUG, "Back from sandybridge_early_initialization()\n"); - - post_code(0x44); - /* Wait for ME to be ready */ - intel_early_me_status(); - intel_early_me_init(); - intel_early_me_uma_size(); - - post_code(0x45); - /* Check PM1_STS[15] to see if we are waking from Sx */ - pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); - - /* Read PM1_CNT[12:10] to determine which Sx state */ - pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); - post_code(0x46); - if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { -#if CONFIG_HAVE_ACPI_RESUME - printk(BIOS_DEBUG, "Resume from S3 detected.\n"); - boot_mode = 2; - /* Clear SLP_TYPE. This will break stage2 but - * we care for that when we get there. - */ - outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); -#else - printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n"); -#endif - } - - post_code(0x48); - - timestamp_add_now(TS_BEFORE_INITRAM); - - /* - * Call early init to initialize memory and chipset. This function returns - * to the romstage_main_continue function with a pointer to the HOB - * structure. - */ - printk(BIOS_DEBUG, "Starting the Intel FSP (early_init)\n"); - fsp_early_init(fsp_info_header); - die("Uh Oh! fsp_early_init should not return here.\n"); -} - -/******************************************************************************* - * The FSP early_init function returns to this function. - * Memory is setup and the stack is set by the FSP. - ******************************************************************************/ -void romstage_main_continue(EFI_STATUS status, VOID *HobListPtr) { - int cbmem_was_initted; - u32 reg32; - void *cbmem_hob_ptr; - - timestamp_add_now(TS_AFTER_INITRAM); - - /* - * HD AUDIO is not used on this system, so we're using some registers - * in there as temporary registers to save TSC values. This is complete - * now, so disable the audio block. - */ - reg32 = RCBA32(FD); - reg32 |= PCH_DISABLE_HD_AUDIO; - RCBA32(FD) = reg32; - - post_code(0x49); - -#if CONFIG_USBDEBUG - /* FSP reconfigures USB, so reinit it to have debug */ - early_usbdebug_init(); -#endif - - /* For reference print FSP version */ - u32 version = MCHBAR32(0x5034); - printk(BIOS_DEBUG, "FSP Version %d.%d.%d Build %d\n", - version >> 24 , (version >> 16) & 0xff, - (version >> 8) & 0xff, version & 0xff); - printk(BIOS_DEBUG, "FSP Status: 0x%0x\n", (u32)status); - - intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); - - printk(BIOS_SPEW, "FD & FD2 Settings:\n"); - display_fd_settings(); - - report_memory_config(); - - post_code(0x4b); - - early_pch_init(); - post_code(0x4c); - - rcba_config(); - post_code(0x4d); - - quick_ram_check(); - post_code(0x4e); - - cbmem_was_initted = !cbmem_recovery(0); - - if(cbmem_was_initted) { - reset_system(); - } - - /* Save the HOB pointer in CBMEM to be used in ramstage. */ - cbmem_hob_ptr = cbmem_add (CBMEM_ID_HOB_POINTER, sizeof(*HobListPtr)); - *(u32*)cbmem_hob_ptr = (u32)HobListPtr; - post_code(0x4f); - - /* Load the ramstage. */ - copy_and_run(); - while (1); -} - -void romstage_fsp_rt_buffer_callback(FSP_INIT_RT_BUFFER *FspRtBuffer) -{ - /* No overrides needed */ - return; -} - -uint64_t get_initial_timestamp(void) -{ - return (uint64_t) pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0) << 4; -} diff --git a/src/mainboard/intel/cougar_canyon2/thermal.h b/src/mainboard/intel/cougar_canyon2/thermal.h deleted file mode 100644 index 7d61e6a408..0000000000 --- a/src/mainboard/intel/cougar_canyon2/thermal.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef MAINBOARD_THERMAL_H -#define MAINBOARD_THERMAL_H - -/* Fan is OFF */ -#define FAN4_THRESHOLD_OFF 0 -#define FAN4_THRESHOLD_ON 0 -#define FAN4_PWM 0x00 - -/* Fan is at LOW speed */ -#define FAN3_THRESHOLD_OFF 48 -#define FAN3_THRESHOLD_ON 55 -#define FAN3_PWM 0x40 - -/* Fan is at MEDIUM speed */ -#define FAN2_THRESHOLD_OFF 52 -#define FAN2_THRESHOLD_ON 64 -#define FAN2_PWM 0x80 - -/* Fan is at HIGH speed */ -#define FAN1_THRESHOLD_OFF 60 -#define FAN1_THRESHOLD_ON 68 -#define FAN1_PWM 0xb0 - -/* Fan is at FULL speed */ -#define FAN0_THRESHOLD_OFF 66 -#define FAN0_THRESHOLD_ON 78 -#define FAN0_PWM 0xff - -/* Temperature which OS will shutdown at */ -#define CRITICAL_TEMPERATURE 105 - -/* Temperature which OS will throttle CPU */ -#define PASSIVE_TEMPERATURE 91 - -/* Tj_max value for calculating PECI CPU temperature */ -#define MAX_TEMPERATURE 100 - -#endif diff --git a/src/northbridge/intel/fsp_sandybridge/Kconfig b/src/northbridge/intel/fsp_sandybridge/Kconfig deleted file mode 100644 index e1f2e888fd..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Google Inc. -## Copyright (C) 2013 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -config NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE - bool - select CPU_INTEL_FSP_MODEL_206AX - select INTEL_GMA_ACPI - -config NORTHBRIDGE_INTEL_FSP_IVYBRIDGE - bool - select CPU_INTEL_FSP_MODEL_306AX - select INTEL_GMA_ACPI - -if NORTHBRIDGE_INTEL_FSP_IVYBRIDGE || NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE - -config VGA_BIOS_ID - string - default "8086,0106" - help - This is the default PCI ID for the sandybridge/ivybridge graphics - devices. This string names the vbios ROM in cbfs. The following - PCI IDs will be remapped to load this ROM: - 0x80860102, 0x8086010a, 0x80860112, 0x80860116 - 0x80860122, 0x80860126, 0x80860166 - -# Ivybridge Specific FSP Kconfig -source src/northbridge/intel/fsp_sandybridge/fsp/Kconfig - -endif # NORTHBRIDGE_INTEL_FSP_IVYBRIDGE || NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE diff --git a/src/northbridge/intel/fsp_sandybridge/Makefile.inc b/src/northbridge/intel/fsp_sandybridge/Makefile.inc deleted file mode 100644 index 6c5e09f9b4..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/Makefile.inc +++ /dev/null @@ -1,41 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2010 Google Inc. -# Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc. -# - -ifeq ($(CONFIG_NORTHBRIDGE_INTEL_FSP_SANDYBRIDGE)$(CONFIG_NORTHBRIDGE_INTEL_FSP_IVYBRIDGE),y) - -subdirs-y += fsp -ramstage-y += northbridge.c -ramstage-y += ram_calc.c -ramstage-y += gma.c - -ramstage-y += acpi.c - -romstage-y += raminit.c -romstage-y += ram_calc.c -romstage-y += early_init.c -romstage-y += report_platform.c -romstage-y += ../../../arch/x86/walkcbfs.S - -smm-$(CONFIG_HAVE_SMI_HANDLER) += udelay.c -smm-$(CONFIG_HAVE_SMI_HANDLER) += finalize.c - -CPPFLAGS_common += -I$(src)/northbridge/intel/fsp_sandybridge/fsp - -endif diff --git a/src/northbridge/intel/fsp_sandybridge/acpi.c b/src/northbridge/intel/fsp_sandybridge/acpi.c deleted file mode 100644 index 1e20945138..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/acpi.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "northbridge.h" -#include - -unsigned long acpi_fill_mcfg(unsigned long current) -{ - device_t dev; - u32 pciexbar = 0; - u32 pciexbar_reg; - int max_buses; - - dev = dev_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_SB, 0); - if (!dev) - dev = dev_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_IB, 0); - if (!dev) - return current; - - pciexbar_reg=pci_read_config32(dev, PCIEXBAR); - - // MMCFG not supported or not enabled. - if (!(pciexbar_reg & (1 << 0))) - return current; - - switch ((pciexbar_reg >> 1) & 3) { - case 0: // 256MB - pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); - max_buses = 256; - break; - case 1: // 128M - pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); - max_buses = 128; - break; - case 2: // 64M - pciexbar = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); - max_buses = 64; - break; - default: // RSVD - return current; - } - - if (!pciexbar) - return current; - - current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *) current, - pciexbar, 0x0, 0x0, max_buses - 1); - - return current; -} - -static void *get_intel_vbios(void) -{ - /* This should probably be looking at CBFS or we should always - * deploy the VBIOS on Intel systems, even if we don't run it - * in coreboot (e.g. SeaBIOS only scenarios). - */ - u8 *vbios = (u8 *)0xc0000; - - optionrom_header_t *oprom = (optionrom_header_t *)vbios; - optionrom_pcir_t *pcir = (optionrom_pcir_t *)(vbios + - oprom->pcir_offset); - - - printk(BIOS_DEBUG, "GET_VBIOS: %x %x %x %x %x\n", - oprom->signature, pcir->vendor, pcir->classcode[0], - pcir->classcode[1], pcir->classcode[2]); - - - if ((oprom->signature == OPROM_SIGNATURE) && - (pcir->vendor == PCI_VENDOR_ID_INTEL) && - (pcir->classcode[0] == 0x00) && - (pcir->classcode[1] == 0x00) && - (pcir->classcode[2] == 0x03)) - return (void *)vbios; - - return NULL; -} - -static int init_opregion_vbt(igd_opregion_t *opregion) -{ - void *vbios; - vbios = get_intel_vbios(); - if (!vbios) { - printk(BIOS_DEBUG, "VBIOS not found.\n"); - return 1; - } - - printk(BIOS_DEBUG, " ... VBIOS found at %p\n", vbios); - optionrom_header_t *oprom = (optionrom_header_t *)vbios; - optionrom_vbt_t *vbt = (optionrom_vbt_t *)(vbios + - oprom->vbt_offset); - - if (read32(vbt->hdr_signature) != VBT_SIGNATURE) { - printk(BIOS_DEBUG, "VBT not found!\n"); - return 1; - } - - memcpy(opregion->header.vbios_version, vbt->coreblock_biosbuild, 4); - memcpy(opregion->vbt.gvd1, vbt, vbt->hdr_vbt_size < 7168 ? - vbt->hdr_vbt_size : 7168); - - return 0; -} - - -/* Initialize IGD OpRegion, called from ACPI code */ -int init_igd_opregion(igd_opregion_t *opregion) -{ - device_t igd; - u16 reg16; - - memset((void *)opregion, 0, sizeof(igd_opregion_t)); - - // FIXME if IGD is disabled, we should exit here. - - memcpy(&opregion->header.signature, IGD_OPREGION_SIGNATURE, - sizeof(opregion->header.signature)); - - /* 8kb */ - opregion->header.size = sizeof(igd_opregion_t) / 1024; - opregion->header.version = IGD_OPREGION_VERSION; - - // FIXME We just assume we're mobile for now - opregion->header.mailboxes = MAILBOXES_MOBILE; - - // TODO Initialize Mailbox 1 - - // TODO Initialize Mailbox 3 - opregion->mailbox3.bclp = IGD_BACKLIGHT_BRIGHTNESS; - opregion->mailbox3.pfit = IGD_FIELD_VALID | IGD_PFIT_STRETCH; - opregion->mailbox3.pcft = 0; // should be (IMON << 1) & 0x3e - opregion->mailbox3.cblv = IGD_FIELD_VALID | IGD_INITIAL_BRIGHTNESS; - opregion->mailbox3.bclm[0] = IGD_WORD_FIELD_VALID + 0x0000; - opregion->mailbox3.bclm[1] = IGD_WORD_FIELD_VALID + 0x0a19; - opregion->mailbox3.bclm[2] = IGD_WORD_FIELD_VALID + 0x1433; - opregion->mailbox3.bclm[3] = IGD_WORD_FIELD_VALID + 0x1e4c; - opregion->mailbox3.bclm[4] = IGD_WORD_FIELD_VALID + 0x2866; - opregion->mailbox3.bclm[5] = IGD_WORD_FIELD_VALID + 0x327f; - opregion->mailbox3.bclm[6] = IGD_WORD_FIELD_VALID + 0x3c99; - opregion->mailbox3.bclm[7] = IGD_WORD_FIELD_VALID + 0x46b2; - opregion->mailbox3.bclm[8] = IGD_WORD_FIELD_VALID + 0x50cc; - opregion->mailbox3.bclm[9] = IGD_WORD_FIELD_VALID + 0x5ae5; - opregion->mailbox3.bclm[10] = IGD_WORD_FIELD_VALID + 0x64ff; - - init_opregion_vbt(opregion); - - /* TODO This needs to happen in S3 resume, too. - * Maybe it should move to the finalize handler - */ - igd = dev_find_slot(0, PCI_DEVFN(0x2, 0)); - - pci_write_config32(igd, ASLS, (u32)opregion); - reg16 = pci_read_config16(igd, SWSCI); - reg16 &= ~(1 << 0); - reg16 |= (1 << 15); - pci_write_config16(igd, SWSCI, reg16); - - /* clear dmisci status */ - reg16 = inw(DEFAULT_PMBASE + TCO1_STS); - reg16 |= DMISCI_STS; // reference code does an &= - outw(DEFAULT_PMBASE + TCO1_STS, reg16); - - /* clear acpi tco status */ - outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS); - - /* enable acpi tco scis */ - reg16 = inw(DEFAULT_PMBASE + GPE0_EN); - reg16 |= TCOSCI_EN; - outw(DEFAULT_PMBASE + GPE0_EN, reg16); - - return 0; -} - -void *igd_make_opregion(void) -{ - igd_opregion_t *opregion; - - printk(BIOS_DEBUG, "ACPI: * IGD OpRegion\n"); - opregion = cbmem_add(CBMEM_ID_IGD_OPREGION, sizeof (*opregion)); - if (opregion) - init_igd_opregion(opregion); - return opregion; -} diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl b/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl deleted file mode 100644 index a1b99b899c..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl +++ /dev/null @@ -1,359 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - - -Name(_HID,EISAID("PNP0A08")) // PCIe -Name(_CID,EISAID("PNP0A03")) // PCI - -Name(_ADR, 0) -Name(_BBN, 0) - -Device (MCHC) -{ - Name(_ADR, 0x00000000) // 0:0.0 - - OperationRegion(MCHP, PCI_Config, 0x00, 0x100) - Field (MCHP, DWordAcc, NoLock, Preserve) - { - Offset (0x40), // EPBAR - EPEN, 1, // Enable - , 11, // - EPBR, 24, // EPBAR - - Offset (0x48), // MCHBAR - MHEN, 1, // Enable - , 13, // - MHBR, 22, // MCHBAR - - Offset (0x60), // PCIe BAR - PXEN, 1, // Enable - PXSZ, 2, // BAR size - , 23, // - PXBR, 10, // PCIe BAR - - Offset (0x68), // DMIBAR - DMEN, 1, // Enable - , 11, // - DMBR, 24, // DMIBAR - - Offset (0x70), // ME Base Address - MEBA, 64, - - // ... - - Offset (0x80), // PAM0 - , 4, - PM0H, 2, - , 2, - Offset (0x81), // PAM1 - PM1L, 2, - , 2, - PM1H, 2, - , 2, - Offset (0x82), // PAM2 - PM2L, 2, - , 2, - PM2H, 2, - , 2, - Offset (0x83), // PAM3 - PM3L, 2, - , 2, - PM3H, 2, - , 2, - Offset (0x84), // PAM4 - PM4L, 2, - , 2, - PM4H, 2, - , 2, - Offset (0x85), // PAM5 - PM5L, 2, - , 2, - PM5H, 2, - , 2, - Offset (0x86), // PAM6 - PM6L, 2, - , 2, - PM6H, 2, - , 2, - - Offset (0xa0), // Top of Used Memory - TOM, 64, - - Offset (0xbc), // Top of Low Used Memory - TLUD, 32, - } - - Mutex (CTCM, 1) /* CTDP Switch Mutex (sync level 1) */ - Name (CTCC, 0) /* CTDP Current Selection */ - Name (CTCN, 0) /* CTDP Nominal Select */ - Name (CTCD, 1) /* CTDP Down Select */ - Name (CTCU, 2) /* CTDP Up Select */ - - OperationRegion (MCHB, SystemMemory, DEFAULT_MCHBAR, 0x8000) - Field (MCHB, DWordAcc, Lock, Preserve) - { - Offset (0x5930), - CTDN, 15, /* CTDP Nominal PL1 */ - Offset (0x59a0), - PL1V, 15, /* Power Limit 1 Value */ - PL1E, 1, /* Power Limit 1 Enable */ - PL1C, 1, /* Power Limit 1 Clamp */ - PL1T, 7, /* Power Limit 1 Time */ - Offset (0x59a4), - PL2V, 15, /* Power Limit 2 Value */ - PL2E, 1, /* Power Limit 2 Enable */ - PL2C, 1, /* Power Limit 2 Clamp */ - PL2T, 7, /* Power Limit 2 Time */ - Offset (0x5f3c), - TARN, 8, /* CTDP Nominal Turbo Activation Ratio */ - Offset (0x5f40), - CTDD, 15, /* CTDP Down PL1 */ - , 1, - TARD, 8, /* CTDP Down Turbo Activation Ratio */ - Offset (0x5f48), - CTDU, 15, /* CTDP Up PL1 */ - , 1, - TARU, 8, /* CTDP Up Turbo Activation Ratio */ - Offset (0x5f50), - CTCS, 2, /* CTDP Select */ - Offset (0x5f54), - TARS, 8, /* Turbo Activation Ratio Select */ - } - - /* - * Search CPU0 _PSS looking for control=arg0 and then - * return previous P-state entry number for new _PPC - * - * Format of _PSS: - * Name (_PSS, Package () { - * Package (6) { freq, power, tlat, blat, control, status } - * } - */ - External (\_PR.CP00._PSS) - Method (PSSS, 1, NotSerialized) - { - Store (One, Local0) /* Start at P1 */ - Store (SizeOf (\_PR.CP00._PSS), Local1) - - While (LLess (Local0, Local1)) { - /* Store _PSS entry Control value to Local2 */ - ShiftRight (DeRefOf (Index (DeRefOf (Index - (\_PR.CP00._PSS, Local0)), 4)), 8, Local2) - If (LEqual (Local2, Arg0)) { - Return (Subtract (Local0, 1)) - } - Increment (Local0) - } - - Return (0) - } - - /* Set TDP Down */ - Method (STND, 0, Serialized) - { - If (Acquire (CTCM, 100)) { - Return (0) - } - If (LEqual (CTCD, CTCC)) { - Release (CTCM) - Return (0) - } - - Store ("Set TDP Down", Debug) - - /* Set CTC */ - Store (CTCD, CTCS) - - /* Set TAR */ - Store (TARD, TARS) - - /* Set PPC limit and notify OS */ - Store (PSSS (TARD), PPCM) - PPCN () - - /* Set PL2 to 1.25 * PL1 */ - Divide (Multiply (CTDD, 125), 100, Local0, PL2V) - - /* Set PL1 */ - Store (CTDD, PL1V) - - /* Store the new TDP Down setting */ - Store (CTCD, CTCC) - - Release (CTCM) - Return (1) - } - - /* Set TDP Nominal from Down */ - Method (STDN, 0, Serialized) - { - If (Acquire (CTCM, 100)) { - Return (0) - } - If (LEqual (CTCN, CTCC)) { - Release (CTCM) - Return (0) - } - - Store ("Set TDP Nominal", Debug) - - /* Set PL1 */ - Store (CTDN, PL1V) - - /* Set PL2 to 1.25 * PL1 */ - Divide (Multiply (CTDN, 125), 100, Local0, PL2V) - - /* Set PPC limit and notify OS */ - Store (PSSS (TARN), PPCM) - PPCN () - - /* Set TAR */ - Store (TARN, TARS) - - /* Set CTC */ - Store (CTCN, CTCS) - - /* Store the new TDP Nominal setting */ - Store (CTCN, CTCC) - - Release (CTCM) - Return (1) - } -} - -// Current Resource Settings - -Method (_CRS, 0, Serialized) -{ - Name (MCRS, ResourceTemplate() - { - // Bus Numbers - WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, 0x0000, 0x00ff, 0x0000, 0x0100,,, PB00) - - // IO Region 0 - DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, 0x0000, 0x0cf7, 0x0000, 0x0cf8,,, PI00) - - // PCI Config Space - Io (Decode16, 0x0cf8, 0x0cf8, 0x0001, 0x0008) - - // IO Region 1 - DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, 0x0d00, 0xffff, 0x0000, 0xf300,,, PI01) - - // VGA memory (0xa0000-0xbffff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000a0000, 0x000bffff, 0x00000000, - 0x00020000,,, ASEG) - - // OPROM reserved (0xd0000-0xd3fff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000d0000, 0x000d3fff, 0x00000000, - 0x00004000,,, OPR0) - - // OPROM reserved (0xd4000-0xd7fff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000d4000, 0x000d7fff, 0x00000000, - 0x00004000,,, OPR1) - - // OPROM reserved (0xd8000-0xdbfff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000d8000, 0x000dbfff, 0x00000000, - 0x00004000,,, OPR2) - - // OPROM reserved (0xdc000-0xdffff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000dc000, 0x000dffff, 0x00000000, - 0x00004000,,, OPR3) - - // BIOS Extension (0xe0000-0xe3fff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000e0000, 0x000e3fff, 0x00000000, - 0x00004000,,, ESG0) - - // BIOS Extension (0xe4000-0xe7fff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000e4000, 0x000e7fff, 0x00000000, - 0x00004000,,, ESG1) - - // BIOS Extension (0xe8000-0xebfff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000e8000, 0x000ebfff, 0x00000000, - 0x00004000,,, ESG2) - - // BIOS Extension (0xec000-0xeffff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000ec000, 0x000effff, 0x00000000, - 0x00004000,,, ESG3) - - // System BIOS (0xf0000-0xfffff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x000f0000, 0x000fffff, 0x00000000, - 0x00010000,,, FSEG) - - // PCI Memory Region (Top of memory-CONFIG_MMCONF_BASE_ADDRESS) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0x00000000, 0x00000000, 0x00000000, - 0x00000000,,, PM01) - - // TPM Area (0xfed40000-0xfed44fff) - DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, - Cacheable, ReadWrite, - 0x00000000, 0xfed40000, 0xfed44fff, 0x00000000, - 0x00005000,,, TPMR) - }) - - // Find PCI resource area in MCRS - CreateDwordField(MCRS, PM01._MIN, PMIN) - CreateDwordField(MCRS, PM01._MAX, PMAX) - CreateDwordField(MCRS, PM01._LEN, PLEN) - - // Fix up PCI memory region - // Start with Top of Lower Usable DRAM - Store (^MCHC.TLUD, Local0) - Store (^MCHC.MEBA, Local1) - - // Check if ME base is equal - If (LEqual (Local0, Local1)) { - // Use Top Of Memory instead - Store (^MCHC.TOM, Local0) - } - - Store (Local0, PMIN) - Store (Subtract(CONFIG_MMCONF_BASE_ADDRESS, 1), PMAX) - Add(Subtract(PMAX, PMIN), 1, PLEN) - - Return (MCRS) -} - -/* IRQ assignment is mainboard specific. Get it from mainboard ACPI code */ -#include "acpi/hostbridge_pci_irqs.asl" diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl b/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl deleted file mode 100644 index df8a389797..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/acpi/igd.asl +++ /dev/null @@ -1,78 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Device (GFX0) -{ - Name (_ADR, 0x00020000) - - OperationRegion (GFXC, PCI_Config, 0x00, 0x0100) - Field (GFXC, DWordAcc, NoLock, Preserve) - { - Offset (0x10), - BAR0, 64 - } - - OperationRegion (GFRG, SystemMemory, And(BAR0, 0xfffffffffffffff0), 0x400000) - Field (GFRG, DWordAcc, NoLock, Preserve) - { - Offset (0x48254), - BCLV, 16, - Offset (0xc8250), - CR1, 32, - CR2, 32 - } - - Name (BRIG, Package (0x12) - { - 0x61, - 0x61, - 0x2, - 0x4, - 0x5, - 0x7, - 0x9, - 0xb, - 0xd, - 0x11, - 0x14, - 0x17, - 0x1c, - 0x20, - 0x27, - 0x31, - 0x41, - 0x61, - }) - - Method (XBCM, 1, NotSerialized) - { - Store (ShiftLeft (Arg0, 4), BCLV) - Store (0x80000000, CR1) - Store (0x061a061a, CR2) - } - - Method (XBQC, 0, NotSerialized) - { - Store (BCLV, Local0) - ShiftRight (Local0, 4, Local0) - Return (Local0) - } -#include -} diff --git a/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl b/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl deleted file mode 100644 index 1c853e1208..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/acpi/sandybridge.asl +++ /dev/null @@ -1,58 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include "../northbridge.h" -#include "hostbridge.asl" - -/* PCI Device Resource Consumption */ -Device (PDRC) -{ - Name (_HID, EISAID("PNP0C02")) - Name (_UID, 1) - - Name (PDRS, ResourceTemplate() { - Memory32Fixed(ReadWrite, 0xfed1c000, 0x00004000) // RCBA - Memory32Fixed(ReadWrite, DEFAULT_MCHBAR, 0x00008000) - Memory32Fixed(ReadWrite, DEFAULT_DMIBAR, 0x00001000) - Memory32Fixed(ReadWrite, DEFAULT_EPBAR, 0x00001000) - Memory32Fixed(ReadWrite, DEFAULT_PCIEXBAR, 0x04000000) - Memory32Fixed(ReadWrite, 0xfed20000, 0x00020000) // Misc ICH - Memory32Fixed(ReadWrite, 0xfed40000, 0x00005000) // Misc ICH - Memory32Fixed(ReadWrite, 0xfed45000, 0x0004b000) // Misc ICH - -#if CONFIG_CHROMEOS_RAMOOPS - Memory32Fixed(ReadWrite, CONFIG_CHROMEOS_RAMOOPS_RAM_START, - CONFIG_CHROMEOS_RAMOOPS_RAM_SIZE) -#endif - - /* Required for SandyBridge sighting 3715511 */ - Memory32Fixed(ReadWrite, 0x20000000, 0x00200000) - Memory32Fixed(ReadWrite, 0x40000000, 0x00200000) - }) - - // Current Resource Settings - Method (_CRS, 0, Serialized) - { - Return(PDRS) - } -} - -// Integrated graphics 0:2.0 -#include "igd.asl" diff --git a/src/northbridge/intel/fsp_sandybridge/chip.h b/src/northbridge/intel/fsp_sandybridge/chip.h deleted file mode 100644 index 6e823dc986..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/chip.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include - -/* - * Digital Port Hotplug Enable: - * 0x04 = Enabled, 2ms short pulse - * 0x05 = Enabled, 4.5ms short pulse - * 0x06 = Enabled, 6ms short pulse - * 0x07 = Enabled, 100ms short pulse - */ -struct northbridge_intel_fsp_sandybridge_config { - u8 gpu_dp_b_hotplug; /* Digital Port B Hotplug Config */ - u8 gpu_dp_c_hotplug; /* Digital Port C Hotplug Config */ - u8 gpu_dp_d_hotplug; /* Digital Port D Hotplug Config */ - - u8 gpu_panel_port_select; /* 0=LVDS 1=DP_B 2=DP_C 3=DP_D */ - u8 gpu_panel_power_cycle_delay; /* T4 time sequence */ - u16 gpu_panel_power_up_delay; /* T1+T2 time sequence */ - u16 gpu_panel_power_down_delay; /* T3 time sequence */ - u16 gpu_panel_power_backlight_on_delay; /* T5 time sequence */ - u16 gpu_panel_power_backlight_off_delay; /* Tx time sequence */ - - u32 gpu_cpu_backlight; /* CPU Backlight PWM value */ - u32 gpu_pch_backlight; /* PCH Backlight PWM value */ - - struct i915_gpu_controller_info gfx; -}; diff --git a/src/northbridge/intel/fsp_sandybridge/early_init.c b/src/northbridge/intel/fsp_sandybridge/early_init.c deleted file mode 100644 index 6ba1ab6828..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/early_init.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include "northbridge.h" - -static void sandybridge_setup_bars(void) -{ - printk(BIOS_DEBUG, "Setting up static northbridge registers..."); - /* Set up all hardcoded northbridge BARs */ - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR, DEFAULT_EPBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), EPBAR + 4, (0LL+DEFAULT_EPBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR, (uintptr_t)DEFAULT_MCHBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), MCHBAR + 4, (0LL+(uintptr_t)DEFAULT_MCHBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), PCIEXBAR, DEFAULT_PCIEXBAR | 5); /* 64MB - busses 0-63 */ - pci_write_config32(PCI_DEV(0, 0x00, 0), PCIEXBAR + 4, (0LL+DEFAULT_PCIEXBAR) >> 32); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR, (uintptr_t)DEFAULT_DMIBAR | 1); - pci_write_config32(PCI_DEV(0, 0x00, 0), DMIBAR + 4, (0LL+(uintptr_t)DEFAULT_DMIBAR) >> 32); - - /* Set C0000-FFFFF to access RAM on both reads and writes */ - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM0, 0x30); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM1, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM2, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM3, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM4, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM5, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), PAM6, 0x33); - -#if CONFIG_ELOG_BOOT_COUNT - /* Increment Boot Counter for non-S3 resume */ - if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && - ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) != SLP_TYP_S3) - boot_count_increment(); -#endif - - printk(BIOS_DEBUG, " done.\n"); - -#if CONFIG_ELOG_BOOT_COUNT - /* Increment Boot Counter except when resuming from S3 */ - if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && - ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) == SLP_TYP_S3) - return; - boot_count_increment(); -#endif -} - -void sandybridge_early_initialization(int chipset_type) -{ - u32 capid0_a; - u8 reg8; - - /* Device ID Override Enable should be done very early */ - capid0_a = pci_read_config32(PCI_DEV(0, 0, 0), 0xe4); - if (capid0_a & (1 << 10)) { - reg8 = pci_read_config8(PCI_DEV(0, 0, 0), 0xf3); - reg8 &= ~7; /* Clear 2:0 */ - - if (chipset_type == SANDYBRIDGE_MOBILE) - reg8 |= 1; /* Set bit 0 */ - - pci_write_config8(PCI_DEV(0, 0, 0), 0xf3, reg8); - } - - /* Setup all BARs required for early PCIe and raminit */ - sandybridge_setup_bars(); -} diff --git a/src/northbridge/intel/fsp_sandybridge/finalize.c b/src/northbridge/intel/fsp_sandybridge/finalize.c deleted file mode 100644 index 90c3635a7c..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/finalize.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include "northbridge.h" - -#define PCI_DEV_SNB PCI_DEV(0, 0, 0) - -void intel_sandybridge_finalize_smm(void) -{ - pcie_or_config16(PCI_DEV_SNB, 0x50, 1 << 0); /* GGC */ - pcie_or_config32(PCI_DEV_SNB, 0x5c, 1 << 0); /* DPR */ - pcie_or_config32(PCI_DEV_SNB, 0x78, 1 << 10); /* ME */ - pcie_or_config32(PCI_DEV_SNB, 0x90, 1 << 0); /* REMAPBASE */ - pcie_or_config32(PCI_DEV_SNB, 0x98, 1 << 0); /* REMAPLIMIT */ - pcie_or_config32(PCI_DEV_SNB, 0xa0, 1 << 0); /* TOM */ - pcie_or_config32(PCI_DEV_SNB, 0xa8, 1 << 0); /* TOUUD */ - pcie_or_config32(PCI_DEV_SNB, 0xb0, 1 << 0); /* BDSM */ - pcie_or_config32(PCI_DEV_SNB, 0xb4, 1 << 0); /* BGSM */ - pcie_or_config32(PCI_DEV_SNB, 0xb8, 1 << 0); /* TSEGMB */ - pcie_or_config32(PCI_DEV_SNB, 0xbc, 1 << 0); /* TOLUD */ - - MCHBAR32_OR(0x5500, 1 << 0); /* PAVP */ - MCHBAR32_OR(0x5f00, 1 << 31); /* SA PM */ - MCHBAR32_OR(0x6020, 1 << 0); /* UMA GFX */ - MCHBAR32_OR(0x63fc, 1 << 0); /* VTDTRK */ - MCHBAR32_OR(0x6800, 1 << 31); - MCHBAR32_OR(0x7000, 1 << 31); - MCHBAR32_OR(0x77fc, 1 << 0); - - /* Memory Controller Lockdown */ - MCHBAR8(0x50fc) = 0x8f; - - /* Read+write the following */ - MCHBAR32(0x6030) = MCHBAR32(0x6030); - MCHBAR32(0x6034) = MCHBAR32(0x6034); - MCHBAR32(0x6008) = MCHBAR32(0x6008); -} diff --git a/src/northbridge/intel/fsp_sandybridge/fsp/Kconfig b/src/northbridge/intel/fsp_sandybridge/fsp/Kconfig deleted file mode 100644 index 82e5361505..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/fsp/Kconfig +++ /dev/null @@ -1,40 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2014 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -config SANDYBRIDGE_FSP_SPECIFIC_OPTIONS - def_bool y - select PLATFORM_USES_FSP1_0 - select USE_GENERIC_FSP_CAR_INC - -config FSP_FILE - string - default "../intel/fsp/ivybridge_bd82x6x/FvFsp.bin" if SOUTHBRIDGE_INTEL_FSP_BD82X6X - help - The path and filename of the Intel FSP binary for this platform. - -config FSP_LOC - hex "Intel FSP Binary location in CBFS" - default 0xfff80000 - help - The location in CBFS that the FSP is located. This must match the - value that is set in the FSP binary. If the FSP needs to be moved, - rebase the FSP with the Intel's BCT (tool). - - The Ivy Bridge Processor/Panther Point FSP is built with a preferred - base address of 0xFFF80000 diff --git a/src/northbridge/intel/fsp_sandybridge/fsp/Makefile.inc b/src/northbridge/intel/fsp_sandybridge/fsp/Makefile.inc deleted file mode 100644 index 282570351b..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/fsp/Makefile.inc +++ /dev/null @@ -1,21 +0,0 @@ -# -# This file is part of the coreboot project. -# -# Copyright (C) 2014 Sage Electronic Engineering, LLC. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; version 2 of the License. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc. -# - -ramstage-y += chipset_fsp_util.c -romstage-y += chipset_fsp_util.c diff --git a/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.c b/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.c deleted file mode 100644 index e9dad29f4c..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "../chip.h" -#include - -#ifndef CONFIG_ENABLE_FSP_FAST_BOOT -# error "CONFIG_ENABLE_FSP_FAST_BOOT must be set." -#endif - -#ifdef __PRE_RAM__ - -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) -static void GetUpdDefaultFromFsp (FSP_INFO_HEADER *FspInfo, UPD_DATA_REGION *UpdData) -{ - VPD_DATA_REGION *VpdDataRgnPtr; - UPD_DATA_REGION *UpdDataRgnPtr; - VpdDataRgnPtr = (VPD_DATA_REGION *)(UINT32)(FspInfo->CfgRegionOffset + FspInfo->ImageBase); - UpdDataRgnPtr = (UPD_DATA_REGION *)(UINT32)(VpdDataRgnPtr->PcdUpdRegionOffset + FspInfo->ImageBase); - memcpy((void*)UpdData, (void*)UpdDataRgnPtr, sizeof(UPD_DATA_REGION)); -} - -static void ConfigureDefaultUpdData(UPD_DATA_REGION *UpdData) -{ - UpdData->HTEnable = TRUE; - UpdData->TurboEnable = FALSE; - UpdData->MemoryDownEnable = FALSE; - UpdData->FastBootEnable = CONFIG_ENABLE_FSP_FAST_BOOT; -} -#else /* IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) */ -const PLATFORM_CONFIG DefaultPlatformConfig = { - TRUE, /* Hyperthreading */ - FALSE, /* Turbo Mode */ - FALSE, /* Memory Down */ -#if IS_ENABLED(CONFIG_ENABLE_FSP_FAST_BOOT) - TRUE, /* Fast Boot */ -#else - FALSE, /* Fast Boot */ -#endif /* CONFIG_ENABLE_FSP_FAST_BOOT */ -}; -#endif /* IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) */ - -/* - * - * Call the FSP to do memory init. The FSP doesn't return to this function. - * The FSP returns to the romstage_main_continue(). - * - */ -void chipset_fsp_early_init(FSP_INIT_PARAMS *FspInitParams, - FSP_INFO_HEADER *fsp_ptr) -{ - FSP_INIT_RT_BUFFER *pFspRtBuffer = FspInitParams->RtBufferPtr; -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) - UPD_DATA_REGION *fsp_upd_data = pFspRtBuffer->Common.UpdDataRgnPtr; -#else - MEM_CONFIG MemoryConfig; - memset((void*)&MemoryConfig, 0, sizeof(MEM_CONFIG)); -#endif - FspInitParams->NvsBufferPtr = NULL; - -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) - /* Initialize the UPD Data */ - GetUpdDefaultFromFsp (fsp_ptr, fsp_upd_data); - ConfigureDefaultUpdData(fsp_upd_data); -#else - pFspRtBuffer->Platform.MemoryConfig = &MemoryConfig; - pFspRtBuffer->PlatformConfiguration.PlatformConfig = &DefaultPlatformConfig; -#endif - -#if IS_ENABLED(CONFIG_ENABLE_FSP_FAST_BOOT) - /* Find the fastboot cache that was saved in the ROM */ - FspInitParams->NvsBufferPtr = find_and_set_fastboot_cache(); -#endif - - pFspRtBuffer->Common.BootMode = 0; -} - -/* The FSP returns here after the fsp_early_init call */ -void ChipsetFspReturnPoint(EFI_STATUS Status, - VOID *HobListPtr) -{ - *(void **)CBMEM_FSP_HOB_PTR=HobListPtr; - if (Status == 0xFFFFFFFF) { - hard_reset(); - } - romstage_main_continue(Status, HobListPtr); -} - -#endif /* __PRE_RAM__ */ diff --git a/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.h b/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.h deleted file mode 100644 index cb0434776b..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef CHIPSET_FSP_UTIL_H -#define CHIPSET_FSP_UTIL_H - -#include -#include -#include -#include -#include -#include -#include -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) -#include -#include -#endif - -#define FSP_RESERVE_MEMORY_SIZE 0x200000 - -#define FSP_INFO_HEADER_GUID \ - { \ - 0x912740BE, 0x2284, 0x4734, {0xB9, 0x71, 0x84, 0xB0, 0x27, 0x35, 0x3F, 0x0C} \ - } - -#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \ - { \ - 0x721acf02, 0x4d77, 0x4c2a, { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \ - } - - -/* - *The FSP Image ID is different for each platform's FSP and - * can be used to verify that the right FSP binary is loaded. - */ - -#if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX) -/* ST2-FSP0 */ -#define FSP_IMAGE_ID_DWORD0 0x2D325453 -#define FSP_IMAGE_ID_DWORD1 0x30505346 -#elif IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X) -/* CC2-FSP\0 */ -#define FSP_IMAGE_ID_DWORD0 0x2D324343 -#define FSP_IMAGE_ID_DWORD1 0x00505346 -#endif - -#ifdef __PRE_RAM__ -void main(FSP_INFO_HEADER *fsp_info_header); -void romstage_main_continue(EFI_STATUS status, VOID *HobListPtr); -#endif - -#endif /* CHIPSET_FSP_UTIL_H */ diff --git a/src/northbridge/intel/fsp_sandybridge/gma.c b/src/northbridge/intel/fsp_sandybridge/gma.c deleted file mode 100644 index 132a1b869b..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/gma.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Chromium OS Authors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include - -#include "chip.h" -#include "northbridge.h" - - -/* some vga option roms are used for several chipsets but they only have one - * PCI ID in their header. If we encounter such an option rom, we need to do - * the mapping ourselfes - */ - -u32 map_oprom_vendev(u32 vendev) -{ - u32 new_vendev=vendev; - - switch (vendev) { - case 0x80860102: /* GT1 Desktop */ - case 0x8086010a: /* GT1 Server */ - case 0x80860112: /* GT2 Desktop */ - case 0x80860116: /* GT2 Mobile */ - case 0x80860122: /* GT2 Desktop >=1.3GHz */ - case 0x80860126: /* GT2 Mobile >=1.3GHz */ - case 0x80860166: /* IVB */ - new_vendev=0x80860106; /* GT1 Mobile */ - break; - } - - return new_vendev; -} - -static void gma_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -const struct i915_gpu_controller_info * -intel_gma_get_controller_info(void) -{ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x2,0)); - if (!dev) { - return NULL; - } - struct northbridge_intel_fsp_sandybridge_config *chip = dev->chip_info; - return &chip->gfx; -} - -static void gma_ssdt(device_t device) -{ - const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info(); - if (!gfx) { - return; - } - - drivers_intel_gma_displays_ssdt_generate(gfx); -} - -static struct pci_operations gma_pci_ops = { - .set_subsystem = gma_set_subsystem, -}; - -static struct device_operations gma_func0_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .acpi_fill_ssdt_generator = gma_ssdt, - .init = pci_dev_init, - .scan_bus = 0, - .enable = 0, - .ops_pci = &gma_pci_ops, -}; - -static const unsigned short gma_ids[] = { - 0x0102, 0x0106, 0x010a, 0x0112, 0x0116, 0x0122, 0x0126, 0x166, - 0, -}; -static const struct pci_driver gma_gt1_desktop __pci_driver = { - .ops = &gma_func0_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices= gma_ids, -}; diff --git a/src/northbridge/intel/fsp_sandybridge/gma.h b/src/northbridge/intel/fsp_sandybridge/gma.h deleted file mode 100644 index 9cc2241410..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/gma.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Chromium OS Authors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* mailbox 0: header */ -typedef struct { - u8 signature[16]; - u32 size; - u32 version; - u8 sbios_version[32]; - u8 vbios_version[16]; - u8 driver_version[16]; - u32 mailboxes; - u8 reserved[164]; -} __attribute__((packed)) opregion_header_t; - -#define IGD_OPREGION_SIGNATURE "IntelGraphicsMem" -#define IGD_OPREGION_VERSION 2 - -#define IGD_MBOX1 (1 << 0) -#define IGD_MBOX2 (1 << 1) -#define IGD_MBOX3 (1 << 2) -#define IGD_MBOX4 (1 << 3) -#define IGD_MBOX5 (1 << 4) - -#define MAILBOXES_MOBILE (IGD_MBOX1 | IGD_MBOX2 | IGD_MBOX3 | \ - IGD_MBOX4 | IGD_MBOX5) -#define MAILBOXES_DESKTOP (IGD_MBOX2 | IGD_MBOX4) - -#define SBIOS_VERSION_SIZE 32 - -/* mailbox 1: public acpi methods */ -typedef struct { - u32 drdy; - u32 csts; - u32 cevt; - u8 reserved1[20]; - u32 didl[8]; - u32 cpdl[8]; - u32 cadl[8]; - u32 nadl[8]; - u32 aslp; - u32 tidx; - u32 chpd; - u32 clid; - u32 cdck; - u32 sxsw; - u32 evts; - u32 cnot; - u32 nrdy; - u8 reserved2[60]; -} __attribute__((packed)) opregion_mailbox1_t; - -/* mailbox 2: software sci interface */ -typedef struct { - u32 scic; - u32 parm; - u32 dslp; - u8 reserved[244]; -} __attribute__((packed)) opregion_mailbox2_t; - -/* mailbox 3: power conservation */ -typedef struct { - u32 ardy; - u32 aslc; - u32 tche; - u32 alsi; - u32 bclp; - u32 pfit; - u32 cblv; - u16 bclm[20]; - u32 cpfm; - u32 epfm; - u8 plut[74]; - u32 pfmb; - u32 ccdv; - u32 pcft; - u8 reserved[94]; -} __attribute__((packed)) opregion_mailbox3_t; - -#define IGD_BACKLIGHT_BRIGHTNESS 0xff -#define IGD_INITIAL_BRIGHTNESS 0x64 - -#define IGD_FIELD_VALID (1 << 31) -#define IGD_WORD_FIELD_VALID (1 << 15) -#define IGD_PFIT_STRETCH 6 - -/* mailbox 4: vbt */ -typedef struct { - u8 gvd1[7168]; -} __attribute__((packed)) opregion_vbt_t; - -/* IGD OpRegion */ -typedef struct { - opregion_header_t header; - opregion_mailbox1_t mailbox1; - opregion_mailbox2_t mailbox2; - opregion_mailbox3_t mailbox3; - opregion_vbt_t vbt; -} __attribute__((packed)) igd_opregion_t; - -/* Intel Video BIOS (Option ROM) */ -typedef struct { - u16 signature; - u8 size; - u8 reserved[21]; - u16 pcir_offset; - u16 vbt_offset; -} __attribute__((packed)) optionrom_header_t; - -#define OPROM_SIGNATURE 0xaa55 - -typedef struct { - u32 signature; - u16 vendor; - u16 device; - u16 reserved1; - u16 length; - u8 revision; - u8 classcode[3]; - u16 imagelength; - u16 coderevision; - u8 codetype; - u8 indicator; - u16 reserved2; -} __attribute__((packed)) optionrom_pcir_t; - -typedef struct { - u8 hdr_signature[20]; - u16 hdr_version; - u16 hdr_size; - u16 hdr_vbt_size; - u8 hdr_vbt_checksum; - u8 hdr_reserved; - u32 hdr_vbt_datablock; - u32 hdr_aim[4]; - u8 datahdr_signature[16]; - u16 datahdr_version; - u16 datahdr_size; - u16 datahdr_datablocksize; - u8 coreblock_id; - u16 coreblock_size; - u16 coreblock_biossize; - u8 coreblock_biostype; - u8 coreblock_releasestatus; - u8 coreblock_hwsupported; - u8 coreblock_integratedhw; - u8 coreblock_biosbuild[4]; - u8 coreblock_biossignon[155]; -} __attribute__((packed)) optionrom_vbt_t; - -#define VBT_SIGNATURE 0x54425624 diff --git a/src/northbridge/intel/fsp_sandybridge/northbridge.c b/src/northbridge/intel/fsp_sandybridge/northbridge.c deleted file mode 100644 index 3f982c4a17..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/northbridge.c +++ /dev/null @@ -1,407 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "chip.h" -#include "northbridge.h" -#include -#include - -static int bridge_revision_id = -1; - -/* IGD UMA memory */ -static uint64_t uma_memory_base = 0; -static uint64_t uma_memory_size = 0; - -int bridge_silicon_revision(void) -{ - if (bridge_revision_id < 0) { - uint8_t stepping = cpuid_eax(1) & 0xf; - uint8_t bridge_id = pci_read_config16( - dev_find_slot(0, PCI_DEVFN(0, 0)), - PCI_DEVICE_ID) & 0xf0; - bridge_revision_id = bridge_id | stepping; - } - return bridge_revision_id; -} - -/* Reserve everything between A segment and 1MB: - * - * 0xa0000 - 0xbffff: legacy VGA - * 0xc0000 - 0xcffff: VGA OPROM (needed by kernel) - * 0xe0000 - 0xfffff: SeaBIOS, if used, otherwise DMI - */ -static const int legacy_hole_base_k = 0xa0000 / 1024; -static const int legacy_hole_size_k = 384; - -static int get_pcie_bar(u32 *base, u32 *len) -{ - device_t dev; - u32 pciexbar_reg; - - *base = 0; - *len = 0; - - dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - if (!dev) - return 0; - - pciexbar_reg = pci_read_config32(dev, PCIEXBAR); - - if (!(pciexbar_reg & (1 << 0))) - return 0; - - switch ((pciexbar_reg >> 1) & 3) { - case 0: // 256MB - *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)); - *len = 256 * 1024 * 1024; - return 1; - case 1: // 128M - *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); - *len = 128 * 1024 * 1024; - return 1; - case 2: // 64M - *base = pciexbar_reg & ((1 << 31)|(1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)|(1 << 26)); - *len = 64 * 1024 * 1024; - return 1; - } - - return 0; -} - -static void add_fixed_resources(struct device *dev, int index) -{ - struct resource *resource; - u32 pcie_config_base, pcie_config_size; - - mmio_resource(dev, index++, uma_memory_base >> 10, uma_memory_size >> 10); - - if (get_pcie_bar(&pcie_config_base, &pcie_config_size)) { - printk(BIOS_DEBUG, "Adding PCIe config bar base=0x%08x " - "size=0x%x\n", pcie_config_base, pcie_config_size); - resource = new_resource(dev, index++); - resource->base = (resource_t) pcie_config_base; - resource->size = (resource_t) pcie_config_size; - resource->flags = IORESOURCE_MEM | IORESOURCE_RESERVE | - IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; - } - - mmio_resource(dev, index++, legacy_hole_base_k, legacy_hole_size_k); -} - -static void pci_domain_set_resources(device_t dev) -{ - uint64_t tom, me_base, touud; - uint32_t tseg_base, uma_size, tolud; - uint16_t ggc; - unsigned long long tomk; - - tomk = ggc = tseg_base = uma_size = tolud = tom = me_base = touud = 0; - - /* Total Memory 2GB example: - * - * 00000000 0000MB-1992MB 1992MB RAM (writeback) - * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) - * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) - * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) - * 7f200000 2034MB TOLUD - * 7f800000 2040MB MEBASE - * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) - * 80000000 2048MB TOM - * 100000000 4096MB-4102MB 6MB RAM (writeback) - * - * Total Memory 4GB example: - * - * 00000000 0000MB-2768MB 2768MB RAM (writeback) - * ad000000 2768MB-2776MB 8MB TSEG (SMRR) - * ad800000 2776MB-2778MB 2MB GFX GTT (uncached) - * ada00000 2778MB-2810MB 32MB GFX UMA (uncached) - * afa00000 2810MB TOLUD - * ff800000 4088MB MEBASE - * ff800000 4088MB-4096MB 8MB ME UMA (uncached) - * 100000000 4096MB TOM - * 100000000 4096MB-5374MB 1278MB RAM (writeback) - * 14fe00000 5368MB TOUUD - */ - - /* Top of Upper Usable DRAM, including remap */ - touud = pci_read_config32(dev, TOUUD+4); - touud <<= 32; - touud |= pci_read_config32(dev, TOUUD) & ~(1UL << 0); - - /* Top of Lower Usable DRAM */ - tolud = pci_read_config32(dev, TOLUD) & ~(1UL << 0); - - /* Top of Memory - does not account for any UMA */ - tom = pci_read_config32(dev, 0xa4); - tom <<= 32; - tom |= pci_read_config32(dev, 0xa0) & ~(1UL << 0); - - printk(BIOS_DEBUG, "TOUUD 0x%llx TOLUD 0x%08x TOM 0x%llx\n", - touud, tolud, tom); - - /* ME UMA needs excluding if total memory <4GB */ - me_base = pci_read_config32(dev, 0x74); - me_base <<= 32; - me_base |= pci_read_config32(dev, 0x70); - - printk(BIOS_DEBUG, "MEBASE 0x%llx\n", me_base); - - tomk = tolud >> 10; - if (me_base == tolud) { - /* ME is from MEBASE-TOM */ - uma_size = (tom - me_base) >> 10; - /* Increment TOLUD to account for ME as RAM */ - tolud += uma_size << 10; - /* UMA starts at old TOLUD */ - uma_memory_base = tomk * 1024ULL; - uma_memory_size = uma_size * 1024ULL; - printk(BIOS_DEBUG, "ME UMA base 0x%llx size %uM\n", - me_base, uma_size >> 10); - } - - /* Graphics memory comes next */ - ggc = pci_read_config16(dev, GGC); - if (!(ggc & 2)) { - printk(BIOS_DEBUG, "IGD decoded, subtracting "); - - /* Graphics memory */ - uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL; - printk(BIOS_DEBUG, "%uM UMA", uma_size >> 10); - tomk -= uma_size; - uma_memory_base = tomk * 1024ULL; - uma_memory_size += uma_size * 1024ULL; - - /* GTT Graphics Stolen Memory Size (GGMS) */ - uma_size = ((ggc >> 8) & 0x3) * 1024ULL; - tomk -= uma_size; - uma_memory_base = tomk * 1024ULL; - uma_memory_size += uma_size * 1024ULL; - printk(BIOS_DEBUG, " and %uM GTT\n", uma_size >> 10); - } - - /* Calculate TSEG size from its base which must be below GTT */ - uma_memory_base = tomk * 1024ULL; - tseg_base = pci_read_config32(dev, 0xb8) & ~(1UL << 0); - uma_size = (uma_memory_base - tseg_base) >> 10; - tomk -= uma_size; - uma_memory_base = tomk * 1024ULL; - uma_memory_size += uma_size * 1024ULL; - printk(BIOS_DEBUG, "TSEG base 0x%08x size %uM\n", - tseg_base, uma_size >> 10); - - printk(BIOS_INFO, "Available memory below 4GB: %lluM\n", tomk >> 10); - - /* Report the memory regions */ - ram_resource(dev, 3, 0, legacy_hole_base_k); - ram_resource(dev, 4, legacy_hole_base_k + legacy_hole_size_k, - (tomk - (legacy_hole_base_k + legacy_hole_size_k))); - - /* - * If >= 4GB installed then memory from TOLUD to 4GB - * is remapped above TOM, TOUUD will account for both - */ - touud >>= 10; /* Convert to KB */ - if (touud > 4096 * 1024) { - ram_resource(dev, 5, 4096 * 1024, touud - (4096 * 1024)); - printk(BIOS_INFO, "Available memory above 4GB: %lluM\n", - (touud >> 10) - 4096); - } - - add_fixed_resources(dev, 6); - - assign_resources(dev->link_list); -} - - /* TODO We could determine how many PCIe busses we need in - * the bar. For now that number is hardcoded to a max of 64. - * See e7525/northbridge.c for an example. - */ -static struct device_operations pci_domain_ops = { - .read_resources = pci_domain_read_resources, - .set_resources = pci_domain_set_resources, - .enable_resources = NULL, - .init = NULL, - .scan_bus = pci_domain_scan_bus, - .ops_pci_bus = pci_bus_default_ops, -}; - -static void mc_read_resources(device_t dev) -{ - struct resource *resource; - - pci_dev_read_resources(dev); - - /* So, this is one of the big mysteries in the coreboot resource - * allocator. This resource should make sure that the address space - * of the PCIe memory mapped config space bar. But it does not. - */ - - /* We use 0xcf as an unused index for our PCIe bar so that we find it again */ - resource = new_resource(dev, 0xcf); - resource->base = DEFAULT_PCIEXBAR; - resource->size = 64 * 1024 * 1024; /* 64MB hard coded PCIe config space */ - resource->flags = - IORESOURCE_MEM | IORESOURCE_FIXED | IORESOURCE_STORED | - IORESOURCE_ASSIGNED; - printk(BIOS_DEBUG, "Adding PCIe enhanced config space BAR 0x%08lx-0x%08lx.\n", - (unsigned long)(resource->base), (unsigned long)(resource->base + resource->size)); -} - -static void mc_set_resources(device_t dev) -{ - struct resource *resource; - - /* Report the PCIe BAR */ - resource = find_resource(dev, 0xcf); - if (resource) { - report_resource_stored(dev, resource, ""); - } - - /* And call the normal set_resources */ - pci_dev_set_resources(dev); -} - -static void intel_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static void northbridge_init(struct device *dev) -{ - u8 bios_reset_cpl; - - /* - * Set bit 0 of BIOS_RESET_CPL to indicate to the CPU - * that BIOS has initialized memory and power management - */ - bios_reset_cpl = MCHBAR8(BIOS_RESET_CPL); - bios_reset_cpl |= 1; - MCHBAR8(BIOS_RESET_CPL) = bios_reset_cpl; - printk(BIOS_DEBUG, "Set BIOS_RESET_CPL\n"); -} - -static u32 northbridge_get_base_reg(device_t dev, int reg) -{ - u32 value; - - value = pci_read_config32(dev, reg); - /* Base registers are at 1MiB granularity. */ - value &= ~((1 << 20) - 1); - return value; -} - -void -northbridge_get_tseg_base_and_size(u32 *tsegmb, u32 *tseg_size) -{ - device_t dev; - u32 bgsm; - dev = dev_find_slot(0, PCI_DEVFN(0, 0)); - - *tsegmb = northbridge_get_base_reg(dev, TSEG); - bgsm = northbridge_get_base_reg(dev, BGSM); - *tseg_size = bgsm - *tsegmb; -} - -void northbridge_write_smram(u8 smram) -{ - pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, smram); -} - -static struct pci_operations intel_pci_ops = { - .set_subsystem = intel_set_subsystem, -}; - -static struct device_operations mc_ops = { - .read_resources = mc_read_resources, - .set_resources = mc_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = northbridge_init, - .scan_bus = 0, - .ops_pci = &intel_pci_ops, - .acpi_fill_ssdt_generator = generate_cpu_entries, -}; - -static const struct pci_driver mc_driver_0100 __pci_driver = { - .ops = &mc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x0100, -}; - -static const struct pci_driver mc_driver __pci_driver = { - .ops = &mc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x0104, /* Sandy bridge */ -}; - -static const struct pci_driver mc_driver_1 __pci_driver = { - .ops = &mc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x0154, /* Ivy bridge */ -}; - -static void cpu_bus_init(device_t dev) -{ - initialize_cpus(dev->link_list); -} - -static struct device_operations cpu_bus_ops = { - .read_resources = DEVICE_NOOP, - .set_resources = DEVICE_NOOP, - .enable_resources = DEVICE_NOOP, - .init = cpu_bus_init, - .scan_bus = 0, -}; - -static void enable_dev(device_t dev) -{ - /* Set the operations if it is a special bus type */ - if (dev->path.type == DEVICE_PATH_DOMAIN) { - dev->ops = &pci_domain_ops; - } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { - dev->ops = &cpu_bus_ops; - } -} - -struct chip_operations northbridge_intel_fsp_sandybridge_ops = { - CHIP_NAME("Intel i7 (SandyBridge/IvyBridge) integrated Northbridge") - .enable_dev = enable_dev, -}; diff --git a/src/northbridge/intel/fsp_sandybridge/northbridge.h b/src/northbridge/intel/fsp_sandybridge/northbridge.h deleted file mode 100644 index 4861254902..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/northbridge.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ -#define __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ - -/* Chipset types */ -#define SANDYBRIDGE_MOBILE 0 -#define SANDYBRIDGE_DESKTOP 1 -#define SANDYBRIDGE_SERVER 2 - -/* Device ID for SandyBridge and IvyBridge */ -#define BASE_REV_SNB 0x00 -#define BASE_REV_IVB 0x50 -#define BASE_REV_MASK 0x50 - -/* SandyBridge CPU stepping */ -#define SNB_STEP_D0 (BASE_REV_SNB + 5) /* Also J0 */ -#define SNB_STEP_D1 (BASE_REV_SNB + 6) -#define SNB_STEP_D2 (BASE_REV_SNB + 7) /* Also J1/Q0 */ - -/* IvyBridge CPU stepping */ -#define IVB_STEP_A0 (BASE_REV_IVB + 0) -#define IVB_STEP_B0 (BASE_REV_IVB + 2) -#define IVB_STEP_C0 (BASE_REV_IVB + 4) -#define IVB_STEP_K0 (BASE_REV_IVB + 5) -#define IVB_STEP_D0 (BASE_REV_IVB + 6) - -/* Intel Enhanced Debug region must be 4MB */ -#define IED_SIZE 0x400000 - -/* Northbridge BARs */ -#define DEFAULT_PCIEXBAR CONFIG_MMCONF_BASE_ADDRESS /* 4 KB per PCIe device */ -#ifndef __ACPI__ -#define DEFAULT_MCHBAR ((u8 *)0xfed10000) /* 16 KB */ -#define DEFAULT_DMIBAR ((u8 *)0xfed18000) /* 4 KB */ -#else -#define DEFAULT_MCHBAR 0xfed10000 /* 16 KB */ -#define DEFAULT_DMIBAR 0xfed18000 /* 4 KB */ -#endif -#define DEFAULT_EPBAR 0xfed19000 /* 4 KB */ -#define DEFAULT_RCBABASE ((u8 *)0xfed1c000) - -#if CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X -#include -#endif - -/* Everything below this line is ignored in the DSDT */ -#ifndef __ACPI__ - -/* Device 0:0.0 PCI configuration space (Host Bridge) */ - -#define EPBAR 0x40 -#define MCHBAR 0x48 -#define PCIEXBAR 0x60 -#define DMIBAR 0x68 -#define X60BAR 0x60 - -#define GGC 0x50 /* GMCH Graphics Control */ - -#define DEVEN 0x54 /* Device Enable */ -#define DEVEN_PEG60 (1 << 13) -#define DEVEN_IGD (1 << 4) -#define DEVEN_PEG10 (1 << 3) -#define DEVEN_PEG11 (1 << 2) -#define DEVEN_PEG12 (1 << 1) -#define DEVEN_HOST (1 << 0) - -#define PAM0 0x80 -#define PAM1 0x81 -#define PAM2 0x82 -#define PAM3 0x83 -#define PAM4 0x84 -#define PAM5 0x85 -#define PAM6 0x86 - -#define LAC 0x87 /* Legacy Access Control */ -#define SMRAM 0x88 /* System Management RAM Control */ - -#define TOM 0xa0 -#define TOUUD 0xa8 /* Top of Upper Usable DRAM */ -#define BGSM 0xb4 /* Base GTT Stolen Memory */ -#define TSEG 0xb8 /* TSEG base */ -#define TOLUD 0xbc /* Top of Low Used Memory */ - -#define SKPAD 0xdc /* Scratchpad Data */ - -/* Device 0:1.0 PCI configuration space (PCI Express) */ - -#define BCTRL1 0x3e /* 16bit */ - - -/* Device 0:2.0 PCI configuration space (Graphics Device) */ - -#define MSAC 0x62 /* Multi Size Aperture Control */ -#define SWSCI 0xe8 /* SWSCI enable */ -#define ASLS 0xfc /* OpRegion Base */ - -/* - * MCHBAR - */ - -#define MCHBAR8(x) *((volatile u8 *)(DEFAULT_MCHBAR + x)) -#define MCHBAR16(x) *((volatile u16 *)(DEFAULT_MCHBAR + x)) -#define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x)) -#define MCHBAR32_OR(x, or) MCHBAR32(x) = (MCHBAR32(x) | (or)) - -#define SSKPD 0x5d14 /* 16bit (scratchpad) */ -#define BIOS_RESET_CPL 0x5da8 /* 8bit */ - -/* - * EPBAR - Egress Port Root Complex Register Block - */ - -#define EPBAR8(x) *((volatile u8 *)(DEFAULT_EPBAR + x)) -#define EPBAR16(x) *((volatile u16 *)(DEFAULT_EPBAR + x)) -#define EPBAR32(x) *((volatile u32 *)(DEFAULT_EPBAR + x)) - -#define EPPVCCAP1 0x004 /* 32bit */ -#define EPPVCCAP2 0x008 /* 32bit */ - -#define EPVC0RCAP 0x010 /* 32bit */ -#define EPVC0RCTL 0x014 /* 32bit */ -#define EPVC0RSTS 0x01a /* 16bit */ - -#define EPVC1RCAP 0x01c /* 32bit */ -#define EPVC1RCTL 0x020 /* 32bit */ -#define EPVC1RSTS 0x026 /* 16bit */ - -#define EPVC1MTS 0x028 /* 32bit */ -#define EPVC1IST 0x038 /* 64bit */ - -#define EPESD 0x044 /* 32bit */ - -#define EPLE1D 0x050 /* 32bit */ -#define EPLE1A 0x058 /* 64bit */ -#define EPLE2D 0x060 /* 32bit */ -#define EPLE2A 0x068 /* 64bit */ - -#define PORTARB 0x100 /* 256bit */ - -/* - * DMIBAR - */ - -#define DMIBAR8(x) *((volatile u8 *)(DEFAULT_DMIBAR + x)) -#define DMIBAR16(x) *((volatile u16 *)(DEFAULT_DMIBAR + x)) -#define DMIBAR32(x) *((volatile u32 *)(DEFAULT_DMIBAR + x)) - -#define DMIVCECH 0x000 /* 32bit */ -#define DMIPVCCAP1 0x004 /* 32bit */ -#define DMIPVCCAP2 0x008 /* 32bit */ - -#define DMIPVCCCTL 0x00c /* 16bit */ - -#define DMIVC0RCAP 0x010 /* 32bit */ -#define DMIVC0RCTL0 0x014 /* 32bit */ -#define DMIVC0RSTS 0x01a /* 16bit */ - -#define DMIVC1RCAP 0x01c /* 32bit */ -#define DMIVC1RCTL 0x020 /* 32bit */ -#define DMIVC1RSTS 0x026 /* 16bit */ - -#define DMILE1D 0x050 /* 32bit */ -#define DMILE1A 0x058 /* 64bit */ -#define DMILE2D 0x060 /* 32bit */ -#define DMILE2A 0x068 /* 64bit */ - -#define DMILCAP 0x084 /* 32bit */ -#define DMILCTL 0x088 /* 16bit */ -#define DMILSTS 0x08a /* 16bit */ - -#define DMICTL1 0x0f0 /* 32bit */ -#define DMICTL2 0x0fc /* 32bit */ - -#define DMICC 0x208 /* 32bit */ - -#define DMIDRCCFG 0xeb4 /* 32bit */ - -#ifndef __ASSEMBLER__ -static inline void barrier(void) { asm("" ::: "memory"); } - -#define PCI_DEVICE_ID_SB 0x0104 -#define PCI_DEVICE_ID_IB 0x0154 - -#ifdef __SMM__ -void intel_sandybridge_finalize_smm(void); -#else /* !__SMM__ */ -int bridge_silicon_revision(void); -void sandybridge_early_initialization(int chipset_type); -void sandybridge_late_initialization(void); - -/* debugging functions */ -void print_pci_devices(void); -void dump_pci_device(unsigned dev); -void dump_pci_devices(void); -void dump_spd_registers(void); -void dump_mem(unsigned start, unsigned end); -void report_platform_info(void); -#endif /* !__SMM__ */ - - -#define MRC_DATA_ALIGN 0x1000 -#define MRC_DATA_SIGNATURE (('M'<<0)|('R'<<8)|('C'<<16)|('D'<<24)) - -#if !defined(__PRE_RAM__) -#include "gma.h" -int init_igd_opregion(igd_opregion_t *igd_opregion); -#endif - -#endif -#endif -#endif /* __NORTHBRIDGE_INTEL_SANDYBRIDGE_SANDYBRIDGE_H__ */ diff --git a/src/northbridge/intel/fsp_sandybridge/northbridge_pci_devs.h b/src/northbridge/intel/fsp_sandybridge/northbridge_pci_devs.h deleted file mode 100644 index b63149f61f..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/northbridge_pci_devs.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _INTEL_FSP_SANDYBRIDGE_PCI_DEVS_H_ -#define _INTEL_FSP_SANDYBRIDGE_PCI_DEVS_H_ - -#include - -#define BUS0 0 - -/* NB PCIe PEG slot */ -#define NB_PEG_DEV 0x01 -#define NB_PEG_FUNC 0 -# define NB_PEG_DEVFN PCI_DEVFN(NB_PEG_DEV, NB_PEG_FUNC) -#define PCIE_CTRL1_FUNC 1 -# define PCIE_CTRL1_DEVFN PCI_DEVFN(NB_PEG_DEV, PCIE_CTRL1_FUNC) -#define PCIE_CTRL2_FUNC 2 -# define PCIE_CTRL2_DEVFN PCI_DEVFN(NB_PEG_DEV, PCIE_CTRL2_FUNC) - -/* Onboard Graphics */ -#define GFX_DEV 0x02 -#define GFX_FUNC 0 -# define GFX_DEVFN PCI_DEVFN(GFX_DEV, GFX_FUNC) - -/* NB PCIe slot */ -#define NB_PCIE_DEV 0x06 -#define NB_PCIE_FUNC 0 -# define NB_PCIE_DEVFN PCI_DEVFN(NB_PCIE_DEV, NB_PCIE_FUNC) - -#endif /* _INTEL_FSP_SANDYBRIDGE_PCI_DEVS_H_ */ diff --git a/src/northbridge/intel/fsp_sandybridge/ram_calc.c b/src/northbridge/intel/fsp_sandybridge/ram_calc.c deleted file mode 100644 index 37d74fc617..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/ram_calc.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#define __SIMPLE_DEVICE__ - -#include -#include -#include -#include "northbridge.h" - -static uintptr_t smm_region_start(void) -{ - /* Base of TSEG is top of usable DRAM */ - uintptr_t tom = pci_read_config32(PCI_DEV(0,0,0), TSEG) & ~(1UL << 0); - return tom; -} - -void *cbmem_top(void) -{ - return (void *) (smm_region_start() - FSP_RESERVE_MEMORY_SIZE); -} diff --git a/src/northbridge/intel/fsp_sandybridge/raminit.c b/src/northbridge/intel/fsp_sandybridge/raminit.c deleted file mode 100644 index 408b4b0611..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/raminit.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include "raminit.h" -#include "northbridge.h" - -static const char* ecc_decoder[] = { - "inactive", - "active on IO", - "disabled on IO", - "active" -}; - -/* - * Dump in the log memory controller configuration as read from the memory - * controller registers. - */ -void report_memory_config(void) -{ - u32 addr_decoder_common, addr_decode_ch[2]; - int i; - - addr_decoder_common = MCHBAR32(0x5000); - addr_decode_ch[0] = MCHBAR32(0x5004); - addr_decode_ch[1] = MCHBAR32(0x5008); - - printk(BIOS_DEBUG, "memcfg DDR3 clock %d MHz\n", - (MCHBAR32(0x5e04) * 13333 * 2 + 50)/100); - printk(BIOS_DEBUG, "memcfg channel assignment: A: %d, B % d, C % d\n", - addr_decoder_common & 3, - (addr_decoder_common >> 2) & 3, - (addr_decoder_common >> 4) & 3); - - for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { - u32 ch_conf = addr_decode_ch[i]; - printk(BIOS_DEBUG, "memcfg channel[%d] config (%8.8x):\n", - i, ch_conf); - printk(BIOS_DEBUG, " ECC %s\n", - ecc_decoder[(ch_conf >> 24) & 3]); - printk(BIOS_DEBUG, " enhanced interleave mode %s\n", - ((ch_conf >> 22) & 1) ? "on" : "off"); - printk(BIOS_DEBUG, " rank interleave %s\n", - ((ch_conf >> 21) & 1) ? "on" : "off"); - printk(BIOS_DEBUG, " DIMMA %d MB width x%d %s rank%s\n", - ((ch_conf >> 0) & 0xff) * 256, - ((ch_conf >> 19) & 1) ? 16 : 8, - ((ch_conf >> 17) & 1) ? "dual" : "single", - ((ch_conf >> 16) & 1) ? "" : ", selected"); - printk(BIOS_DEBUG, " DIMMB %d MB width x%d %s rank%s\n", - ((ch_conf >> 8) & 0xff) * 256, - ((ch_conf >> 20) & 1) ? 16 : 8, - ((ch_conf >> 18) & 1) ? "dual" : "single", - ((ch_conf >> 16) & 1) ? ", selected" : ""); - } -} diff --git a/src/northbridge/intel/fsp_sandybridge/raminit.h b/src/northbridge/intel/fsp_sandybridge/raminit.h deleted file mode 100644 index c97b64cb2c..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/raminit.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef RAMINIT_H -#define RAMINIT_H - -void report_memory_config(void); - -#endif /* RAMINIT_H */ diff --git a/src/northbridge/intel/fsp_sandybridge/report_platform.c b/src/northbridge/intel/fsp_sandybridge/report_platform.c deleted file mode 100644 index e661487a6f..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/report_platform.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include - -#if CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X -#include -#endif - -#include -#include "northbridge.h" - -static void report_cpu_info(void) -{ - struct cpuid_result cpuidr; - u32 i, index; - char cpu_string[50], *cpu_name = cpu_string; /* 48 bytes are reported */ - int vt, txt, aes; - const char *mode[] = {"NOT ", ""}; - - index = 0x80000000; - cpuidr = cpuid(index); - if (cpuidr.eax < 0x80000004) { - strcpy(cpu_string, "Platform info not available"); - } else { - u32 *p = (u32*) cpu_string; - for (i = 2; i <= 4 ; i++) { - cpuidr = cpuid(index + i); - *p++ = cpuidr.eax; - *p++ = cpuidr.ebx; - *p++ = cpuidr.ecx; - *p++ = cpuidr.edx; - } - } - /* Skip leading spaces in CPU name string */ - while (cpu_name[0] == ' ') - cpu_name++; - - cpuidr = cpuid(1); - printk(BIOS_DEBUG, "CPU id(%x): %s\n", cpuidr.eax, cpu_name); - aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0; - txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0; - vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0; - printk(BIOS_DEBUG, "AES %ssupported, TXT %ssupported, VT %ssupported\n", - mode[aes], mode[txt], mode[vt]); -} - -/* The PCI id name match comes from Intel document 472178 */ -static struct { - u16 dev_id; - const char *dev_name; -} pch_table [] = { - {0x1E41, "Desktop Sample"}, - {0x1E42, "Mobile Sample"}, - {0x1E43, "SFF Sample"}, - {0x1E44, "Z77"}, - {0x1E45, "H71"}, - {0x1E46, "Z75"}, - {0x1E47, "Q77"}, - {0x1E48, "Q75"}, - {0x1E49, "B75"}, - {0x1E4A, "H77"}, - {0x1E53, "C216"}, - {0x1E55, "QM77"}, - {0x1E56, "QS77"}, - {0x1E58, "UM77"}, - {0x1E57, "HM77"}, - {0x1E59, "HM76"}, - {0x1E5D, "HM75"}, - {0x1E5E, "HM70"}, - {0x1E5F, "NM70"}, -}; - -static void report_pch_info(void) -{ - int i; - u16 dev_id = pci_read_config16(PCH_LPC_DEV, 2); - - - const char *pch_type = "Unknown"; - for (i = 0; i < ARRAY_SIZE(pch_table); i++) { - if (pch_table[i].dev_id == dev_id) { - pch_type = pch_table[i].dev_name; - break; - } - } - printk (BIOS_DEBUG, "PCH type: %s, device id: %x, rev id %x\n", - pch_type, dev_id, pci_read_config8(PCH_LPC_DEV, 8)); -} - -void report_platform_info(void) -{ - report_cpu_info(); - report_pch_info(); -} diff --git a/src/northbridge/intel/fsp_sandybridge/udelay.c b/src/northbridge/intel/fsp_sandybridge/udelay.c deleted file mode 100644 index e6dcbf180e..0000000000 --- a/src/northbridge/intel/fsp_sandybridge/udelay.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2008 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include - -/** - * Intel SandyBridge/IvyBridge CPUs always run the TSC at BCLK=100MHz - */ - -void udelay(u32 us) -{ - u32 dword; - tsc_t tsc, tsc1, tscd; - msr_t msr; - u32 fsb = 100, divisor; - u32 d; /* ticks per us */ - - msr = rdmsr(0xce); - divisor = (msr.lo >> 8) & 0xff; - - d = fsb * divisor; /* On Core/Core2 this is divided by 4 */ - multiply_to_tsc(&tscd, us, d); - - tsc1 = rdtsc(); - dword = tsc1.lo + tscd.lo; - if ((dword < tsc1.lo) || (dword < tscd.lo)) { - tsc1.hi++; - } - tsc1.lo = dword; - tsc1.hi += tscd.hi; - - do { - tsc = rdtsc(); - } while ((tsc.hi < tsc1.hi) - || ((tsc.hi == tsc1.hi) && (tsc.lo <= tsc1.lo))); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/Kconfig b/src/southbridge/intel/fsp_bd82x6x/Kconfig deleted file mode 100644 index 85c6ee7862..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/Kconfig +++ /dev/null @@ -1,57 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2011 Google Inc. -## Copyright (C) 2013 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -config SOUTHBRIDGE_INTEL_FSP_BD82X6X - bool - -if SOUTHBRIDGE_INTEL_FSP_BD82X6X - -config SOUTH_BRIDGE_OPTIONS # dummy - def_bool y - select IOAPIC - select HAVE_HARD_RESET - select HAVE_SMI_HANDLER - select USE_WATCHDOG_ON_BOOT - select PCIEXP_ASPM - select PCIEXP_COMMON_CLOCK - select SPI_FLASH - select COMMON_FADT - select HAVE_INTEL_FIRMWARE - -config EHCI_BAR - hex - default 0xfef00000 - -config BOOTBLOCK_SOUTHBRIDGE_INIT - string - default "southbridge/intel/fsp_bd82x6x/bootblock.c" - -config SERIRQ_CONTINUOUS_MODE - bool - default n - help - If you set this option to y, the serial IRQ machine will be - operated in continuous mode. - -config HPET_MIN_TICKS - hex - default 0x80 - -endif diff --git a/src/southbridge/intel/fsp_bd82x6x/Makefile.inc b/src/southbridge/intel/fsp_bd82x6x/Makefile.inc deleted file mode 100644 index d14d303c75..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/Makefile.inc +++ /dev/null @@ -1,51 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2010 Google Inc. -## Copyright (C) 2013 Sage Electronic Engineering, LLC. -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc. -## - -ifeq ($(CONFIG_SOUTHBRIDGE_INTEL_FSP_BD82X6X),y) - -ramstage-y += pch.c -ramstage-y += azalia.c -ramstage-y += lpc.c -ramstage-y += sata.c -ramstage-y += me.c -ramstage-y += me_8.x.c -ramstage-y += me_status.c -ramstage-y += reset.c -ramstage-y += watchdog.c - -ramstage-$(CONFIG_ELOG) += elog.c -ramstage-y += ../common/spi.c -smm-$(CONFIG_SPI_FLASH_SMM) += ../common/spi.c - -ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c -smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me.c me_8.x.c finalize.c - -ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c - -romstage-y += early_usb.c early_smbus.c early_me.c me_status.c gpio.c early_init.c -romstage-$(CONFIG_USBDEBUG) += usb_debug.c -ramstage-$(CONFIG_USBDEBUG) += usb_debug.c -smm-$(CONFIG_USBDEBUG) += usb_debug.c -romstage-y += reset.c -romstage-y += early_spi.c - -CPPFLAGS_common += -I$(src)/southbridge/intel/fsp_bd82x6x - -endif diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl deleted file mode 100644 index 6679bd1126..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/audio.asl +++ /dev/null @@ -1,34 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel PCH HDA */ - -// Intel High Definition Audio (Azalia) 0:1b.0 - -Device (HDEF) -{ - Name (_ADR, 0x001b0000) - - // Power Resources for Wake - Name (_PRW, Package(){ - 13, // Bit 13 of GPE - 4 // Can wake from S4 state. - }) -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl deleted file mode 100644 index f124eb0aee..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/globalnvs.asl +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Global Variables */ - -Name(\PICM, 0) // IOAPIC/8259 -Name(\DSEN, 1) // Display Output Switching Enable - -/* Global ACPI memory region. This region is used for passing information - * between coreboot (aka "the system bios"), ACPI, and the SMI handler. - * Since we don't know where this will end up in memory at ACPI compile time, - * we have to fix it up in coreboot's ACPI creation phase. - */ - -External(NVSA) -OperationRegion (GNVS, SystemMemory, NVSA, 0xf00) -Field (GNVS, ByteAcc, NoLock, Preserve) -{ - /* Miscellaneous */ - Offset (0x00), - OSYS, 16, // 0x00 - Operating System - SMIF, 8, // 0x02 - SMI function - PRM0, 8, // 0x03 - SMI function parameter - PRM1, 8, // 0x04 - SMI function parameter - SCIF, 8, // 0x05 - SCI function - PRM2, 8, // 0x06 - SCI function parameter - PRM3, 8, // 0x07 - SCI function parameter - LCKF, 8, // 0x08 - Global Lock function for EC - PRM4, 8, // 0x09 - Lock function parameter - PRM5, 8, // 0x0a - Lock function parameter - P80D, 32, // 0x0b - Debug port (IO 0x80) value - LIDS, 8, // 0x0f - LID state (open = 1) - PWRS, 8, // 0x10 - Power State (AC = 1) - /* Thermal policy */ - Offset (0x11), - TLVL, 8, // 0x11 - Throttle Level Limit - FLVL, 8, // 0x12 - Current FAN Level - TCRT, 8, // 0x13 - Critical Threshold - TPSV, 8, // 0x14 - Passive Threshold - TMAX, 8, // 0x15 - CPU Tj_max - F0OF, 8, // 0x16 - FAN 0 OFF Threshold - F0ON, 8, // 0x17 - FAN 0 ON Threshold - F0PW, 8, // 0x18 - FAN 0 PWM value - F1OF, 8, // 0x19 - FAN 1 OFF Threshold - F1ON, 8, // 0x1a - FAN 1 ON Threshold - F1PW, 8, // 0x1b - FAN 1 PWM value - F2OF, 8, // 0x1c - FAN 2 OFF Threshold - F2ON, 8, // 0x1d - FAN 2 ON Threshold - F2PW, 8, // 0x1e - FAN 2 PWM value - F3OF, 8, // 0x1f - FAN 3 OFF Threshold - F3ON, 8, // 0x20 - FAN 3 ON Threshold - F3PW, 8, // 0x21 - FAN 3 PWM value - F4OF, 8, // 0x22 - FAN 4 OFF Threshold - F4ON, 8, // 0x23 - FAN 4 ON Threshold - F4PW, 8, // 0x24 - FAN 4 PWM value - TMPS, 8, // 0x25 - Temperature Sensor ID - /* Processor Identification */ - Offset (0x28), - APIC, 8, // 0x28 - APIC Enabled by coreboot - MPEN, 8, // 0x29 - Multi Processor Enable - PCP0, 8, // 0x2a - PDC CPU/CORE 0 - PCP1, 8, // 0x2b - PDC CPU/CORE 1 - PPCM, 8, // 0x2c - Max. PPC state - PCNT, 8, // 0x2d - Processor count - /* Super I/O & CMOS config */ - Offset (0x32), - NATP, 8, // 0x32 - - S5U0, 8, // 0x33 - Enable USB0 in S5 - S5U1, 8, // 0x34 - Enable USB1 in S5 - S3U0, 8, // 0x35 - Enable USB0 in S3 - S3U1, 8, // 0x36 - Enable USB1 in S3 - S33G, 8, // 0x37 - Enable 3G in S3 - CMEM, 32, // 0x38 - CBMEM TOC - /* Integrated Graphics Device */ - Offset (0x3c), - IGDS, 8, // 0x3c - IGD state (primary = 1) - TLST, 8, // 0x3d - Display Toggle List pointer - CADL, 8, // 0x3e - Currently Attached Devices List - PADL, 8, // 0x3f - Previously Attached Devices List - CSTE, 16, // 0x40 - Current display state - NSTE, 16, // 0x42 - Next display state - SSTE, 16, // 0x44 - Set display state - Offset (0x46), - NDID, 8, // 0x46 - Number of Device IDs - DID1, 32, // 0x47 - Device ID 1 - DID2, 32, // 0x4b - Device ID 2 - DID3, 32, // 0x4f - Device ID 3 - DID4, 32, // 0x53 - Device ID 4 - DID5, 32, // 0x57 - Device ID 5 - /* Backlight Control */ - Offset (0x64), - BLCS, 8, // 0x64 - Backlight control possible? - BRTL, 8, // 0x65 - Brightness Level - ODDS, 8, // 0x66 - /* Ambient Light Sensors */ - Offset (0x6e), - ALSE, 8, // 0x6e - ALS enable - ALAF, 8, // 0x6f - Ambient light adjustment factor - LLOW, 8, // 0x70 - LUX Low - LHIH, 8, // 0x71 - LUX High - /* EMA */ - Offset (0x78), - EMAE, 8, // 0x78 - EMA enable - EMAP, 16, // 0x79 - EMA pointer - EMAL, 16, // 0x7b - EMA length - /* MEF */ - Offset (0x82), - MEFE, 8, // 0x82 - MEF enable - /* TPM support */ - Offset (0x8c), - TPMP, 8, // 0x8c - TPM - TPME, 8, // 0x8d - TPM enable - /* SATA */ - Offset (0x96), - GTF0, 56, // 0x96 - GTF task file buffer for port 0 - GTF1, 56, // 0x9d - GTF task file buffer for port 1 - GTF2, 56, // 0xa4 - GTF task file buffer for port 2 - IDEM, 8, // 0xab - IDE mode (compatible / enhanced) - IDET, 8, // 0xac - IDE - /* IGD OpRegion */ - Offset (0xb4), - ASLB, 32, // 0xb4 - IGD OpRegion Base Address - IBTT, 8, // 0xb8 - IGD boot panel device - IPAT, 8, // 0xb9 - IGD panel type cmos option - ITVF, 8, // 0xba - IGD TV format cmos option - ITVM, 8, // 0xbb - IGD TV minor format option - IPSC, 8, // 0xbc - IGD panel scaling - IBLC, 8, // 0xbd - IGD BLC config - IBIA, 8, // 0xbe - IGD BIA config - ISSC, 8, // 0xbf - IGD SSC config - I409, 8, // 0xc0 - IGD 0409 modified settings - I509, 8, // 0xc1 - IGD 0509 modified settings - I609, 8, // 0xc2 - IGD 0609 modified settings - I709, 8, // 0xc3 - IGD 0709 modified settings - IDMM, 8, // 0xc4 - IGD Power conservation feature - IDMS, 8, // 0xc5 - IGD DVMT memory size - IF1E, 8, // 0xc6 - IGD function 1 enable - HVCO, 8, // 0xc7 - IGD HPLL VCO - NXD1, 32, // 0xc8 - IGD _DGS next DID1 - NXD2, 32, // 0xcc - IGD _DGS next DID2 - NXD3, 32, // 0xd0 - IGD _DGS next DID3 - NXD4, 32, // 0xd4 - IGD _DGS next DID4 - NXD5, 32, // 0xd8 - IGD _DGS next DID5 - NXD6, 32, // 0xdc - IGD _DGS next DID6 - NXD7, 32, // 0xe0 - IGD _DGS next DID7 - NXD8, 32, // 0xe4 - IGD _DGS next DID8 - - ISCI, 8, // 0xe8 - IGD SMI/SCI mode (0: SCI) - PAVP, 8, // 0xe9 - IGD PAVP data - Offset (0xeb), - OSCC, 8, // 0xeb - PCIe OSC control - NPCE, 8, // 0xec - native pcie support - PLFL, 8, // 0xed - platform flavor - BREV, 8, // 0xee - board revision - DPBM, 8, // 0xef - digital port b mode - DPCM, 8, // 0xf0 - digital port c mode - DPDM, 8, // 0xf1 - digital port d mode - ALFP, 8, // 0xf2 - active lfp - IMON, 8, // 0xf3 - current graphics turbo imon value - MMIO, 8, // 0xf4 - 64bit mmio support - - /* ChromeOS specific */ - Offset (0x100), - #include -} - -/* Set flag to enable USB charging in S3 */ -Method (S3UE) -{ - Store (One, \S3U0) - Store (One, \S3U1) -} - -/* Set flag to disable USB charging in S3 */ -Method (S3UD) -{ - Store (Zero, \S3U0) - Store (Zero, \S3U1) -} - -/* Set flag to enable USB charging in S5 */ -Method (S5UE) -{ - Store (One, \S5U0) - Store (One, \S5U1) -} - -/* Set flag to disable USB charging in S5 */ -Method (S5UD) -{ - Store (Zero, \S5U0) - Store (Zero, \S5U1) -} - -/* Set flag to enable 3G module in S3 */ -Method (S3GE) -{ - Store (One, \S33G) -} - -/* Set flag to disable 3G module in S3 */ -Method (S3GD) -{ - Store (Zero, \S33G) -} - -External (\_TZ.THRM) -External (\_TZ.SKIN) - -Method (TZUP) -{ - /* Update Primary Thermal Zone */ - If (CondRefOf (\_TZ.THRM, Local0)) { - Notify (\_TZ.THRM, 0x81) - } - - /* Update Secondary Thermal Zone */ - If (CondRefOf (\_TZ.SKIN, Local0)) { - Notify (\_TZ.SKIN, 0x81) - } -} - -/* Update Fan 0 thresholds */ -Method (F0UT, 2) -{ - Store (Arg0, \F0OF) - Store (Arg1, \F0ON) - TZUP () -} - -/* Update Fan 1 thresholds */ -Method (F1UT, 2) -{ - Store (Arg0, \F1OF) - Store (Arg1, \F1ON) - TZUP () -} - -/* Update Fan 2 thresholds */ -Method (F2UT, 2) -{ - Store (Arg0, \F2OF) - Store (Arg1, \F2ON) - TZUP () -} - -/* Update Fan 3 thresholds */ -Method (F3UT, 2) -{ - Store (Arg0, \F3OF) - Store (Arg1, \F3ON) - TZUP () -} - -/* Update Fan 4 thresholds */ -Method (F4UT, 2) -{ - Store (Arg0, \F4OF) - Store (Arg1, \F4ON) - TZUP () -} - -/* Update Temperature Sensor ID */ -Method (TMPU, 1) -{ - Store (Arg0, \TMPS) - TZUP () -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl deleted file mode 100644 index acc03f0ceb..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/irqlinks.asl +++ /dev/null @@ -1,491 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Device (LNKA) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 1) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTA) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLA, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLA, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTA - ShiftLeft(1, And(PRTA, 0x0f), IRQ0) - - Return (RTLA) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTA) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTA, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKB) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 2) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTB) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLB, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLB, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTB - ShiftLeft(1, And(PRTB, 0x0f), IRQ0) - - Return (RTLB) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTB) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTB, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKC) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 3) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTC) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLC, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLC, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTC - ShiftLeft(1, And(PRTC, 0x0f), IRQ0) - - Return (RTLC) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTC) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTC, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKD) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 4) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTD) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLD, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLD, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTD - ShiftLeft(1, And(PRTD, 0x0f), IRQ0) - - Return (RTLD) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTD) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTD, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKE) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 5) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTE) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLE, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLE, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTE - ShiftLeft(1, And(PRTE, 0x0f), IRQ0) - - Return (RTLE) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTE) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTE, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKF) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 6) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTF) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLF, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLF, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTF - ShiftLeft(1, And(PRTF, 0x0f), IRQ0) - - Return (RTLF) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTF) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTF, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKG) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 7) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTG) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 10, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLG, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLG, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTG - ShiftLeft(1, And(PRTG, 0x0f), IRQ0) - - Return (RTLG) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTG) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTG, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} - -Device (LNKH) -{ - Name (_HID, EISAID("PNP0C0F")) - Name (_UID, 8) - - // Disable method - Method (_DIS, 0, Serialized) - { - Store (0x80, PRTH) - } - - // Possible Resource Settings for this Link - Name (_PRS, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) - { 3, 4, 5, 6, 7, 11, 12, 14, 15 } - }) - - // Current Resource Settings for this link - Method (_CRS, 0, Serialized) - { - Name (RTLH, ResourceTemplate() - { - IRQ(Level, ActiveLow, Shared) {} - }) - CreateWordField(RTLH, 1, IRQ0) - - // Clear the WordField - Store (Zero, IRQ0) - - // Set the bit from PRTH - ShiftLeft(1, And(PRTH, 0x0f), IRQ0) - - Return (RTLH) - } - - // Set Resource Setting for this IRQ link - Method (_SRS, 1, Serialized) - { - CreateWordField(Arg0, 1, IRQ0) - - // Which bit is set? - FindSetRightBit(IRQ0, Local0) - - Decrement(Local0) - Store(Local0, PRTH) - } - - // Status - Method (_STA, 0, Serialized) - { - If(And(PRTH, 0x80)) { - Return (0x9) - } Else { - Return (0xb) - } - } -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl deleted file mode 100644 index 83c04d5045..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/lpc.asl +++ /dev/null @@ -1,223 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel LPC Bus Device - 0:1f.0 - -Device (LPCB) -{ - Name(_ADR, 0x001f0000) - - OperationRegion(LPC0, PCI_Config, 0x00, 0x100) - Field (LPC0, AnyAcc, NoLock, Preserve) - { - Offset (0x40), - PMBS, 16, // PMBASE - Offset (0x60), // Interrupt Routing Registers - PRTA, 8, - PRTB, 8, - PRTC, 8, - PRTD, 8, - Offset (0x68), - PRTE, 8, - PRTF, 8, - PRTG, 8, - PRTH, 8, - - Offset (0x80), // IO Decode Ranges - IOD0, 8, - IOD1, 8, - - Offset (0xb8), // GPIO Routing Control - GR00, 2, - GR01, 2, - GR02, 2, - GR03, 2, - GR04, 2, - GR05, 2, - GR06, 2, - GR07, 2, - GR08, 2, - GR09, 2, - GR10, 2, - GR11, 2, - GR12, 2, - GR13, 2, - GR14, 2, - GR15, 2, - - Offset (0xf0), // RCBA - RCEN, 1, - , 13, - RCBA, 18, - } - - #include "irqlinks.asl" - - #include "acpi/ec.asl" - - Device (DMAC) // DMA Controller - { - Name(_HID, EISAID("PNP0200")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x00, 0x00, 0x01, 0x20) - IO (Decode16, 0x81, 0x81, 0x01, 0x11) - IO (Decode16, 0x93, 0x93, 0x01, 0x0d) - IO (Decode16, 0xc0, 0xc0, 0x01, 0x20) - DMA (Compatibility, NotBusMaster, Transfer8_16) { 4 } - }) - } - - Device (FWH) // Firmware Hub - { - Name (_HID, EISAID("INT0800")) - Name (_CRS, ResourceTemplate() - { - Memory32Fixed(ReadOnly, 0xff000000, 0x01000000) - }) - } - - Device (HPET) - { - Name (_HID, EISAID("PNP0103")) - Name (_CID, 0x010CD041) - - Name(BUF0, ResourceTemplate() - { - Memory32Fixed(ReadOnly, 0xfed00000, 0x400, FED0) - }) - - Method (_STA, 0) // Device Status - { - If (HPTE) { - // Note: Ancient versions of Windows don't want - // to see the HPET in order to work right - If (LGreaterEqual(OSYS, 2001)) { - Return (0xf) // Enable and show device - } Else { - Return (0xb) // Enable and don't show device - } - } - - Return (0x0) // Not enabled, don't show. - } - - Method (_CRS, 0, Serialized) // Current resources - { - If (HPTE) { - CreateDWordField(BUF0, \_SB.PCI0.LPCB.HPET.FED0._BAS, HPT0) - If (Lequal(HPAS, 1)) { - Store(0xfed01000, HPT0) - } - - If (Lequal(HPAS, 2)) { - Store(0xfed02000, HPT0) - } - - If (Lequal(HPAS, 3)) { - Store(0xfed03000, HPT0) - } - } - - Return (BUF0) - } - } - - Device(PIC) // 8259 Interrupt Controller - { - Name(_HID,EISAID("PNP0000")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x20, 0x20, 0x01, 0x02) - IO (Decode16, 0x24, 0x24, 0x01, 0x02) - IO (Decode16, 0x28, 0x28, 0x01, 0x02) - IO (Decode16, 0x2c, 0x2c, 0x01, 0x02) - IO (Decode16, 0x30, 0x30, 0x01, 0x02) - IO (Decode16, 0x34, 0x34, 0x01, 0x02) - IO (Decode16, 0x38, 0x38, 0x01, 0x02) - IO (Decode16, 0x3c, 0x3c, 0x01, 0x02) - IO (Decode16, 0xa0, 0xa0, 0x01, 0x02) - IO (Decode16, 0xa4, 0xa4, 0x01, 0x02) - IO (Decode16, 0xa8, 0xa8, 0x01, 0x02) - IO (Decode16, 0xac, 0xac, 0x01, 0x02) - IO (Decode16, 0xb0, 0xb0, 0x01, 0x02) - IO (Decode16, 0xb4, 0xb4, 0x01, 0x02) - IO (Decode16, 0xb8, 0xb8, 0x01, 0x02) - IO (Decode16, 0xbc, 0xbc, 0x01, 0x02) - IO (Decode16, 0x4d0, 0x4d0, 0x01, 0x02) - IRQNoFlags () { 2 } - }) - } - - Device(MATH) // FPU - { - Name (_HID, EISAID("PNP0C04")) - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0xf0, 0xf0, 0x01, 0x01) - IRQNoFlags() { 13 } - }) - } - - Device(LDRC) // LPC device: Resource consumption - { - Name (_HID, EISAID("PNP0C02")) - Name (_UID, 2) - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0x2e, 0x2e, 0x1, 0x02) // First SuperIO - IO (Decode16, 0x4e, 0x4e, 0x1, 0x02) // Second SuperIO - IO (Decode16, 0x61, 0x61, 0x1, 0x01) // NMI Status - IO (Decode16, 0x63, 0x63, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x65, 0x65, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x67, 0x67, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0x80, 0x80, 0x1, 0x01) // Port 80 Post - IO (Decode16, 0x92, 0x92, 0x1, 0x01) // CPU Reserved - IO (Decode16, 0xb2, 0xb2, 0x1, 0x02) // SWSMI - //IO (Decode16, 0x800, 0x800, 0x1, 0x10) // ACPI I/O trap - IO (Decode16, DEFAULT_PMBASE, DEFAULT_PMBASE, 0x1, 0x80) // ICH7-M ACPI - IO (Decode16, DEFAULT_GPIOBASE, DEFAULT_GPIOBASE, 0x1, 0x40) // ICH7-M GPIO - }) - } - - Device (RTC) // Real Time Clock - { - Name (_HID, EISAID("PNP0B00")) - Name (_CRS, ResourceTemplate() - { - IO (Decode16, 0x70, 0x70, 1, 8) -// Disable as Windows doesn't like it, and systems don't seem to use it. -// IRQNoFlags() { 8 } - }) - } - - Device (TIMR) // Intel 8254 timer - { - Name(_HID, EISAID("PNP0100")) - Name(_CRS, ResourceTemplate() - { - IO (Decode16, 0x40, 0x40, 0x01, 0x04) - IO (Decode16, 0x50, 0x50, 0x10, 0x04) - IRQNoFlags() {0} - }) - } - - #include "acpi/superio.asl" -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl deleted file mode 100644 index 50b331d61f..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/pch.asl +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel Cougar Point PCH support */ - -Scope(\) -{ - // IO-Trap at 0x800. This is the ACPI->SMI communication interface. - - OperationRegion(IO_T, SystemIO, 0x800, 0x10) - Field(IO_T, ByteAcc, NoLock, Preserve) - { - Offset(0x8), - TRP0, 8 // IO-Trap at 0x808 - } - - // PCH Power Management Registers, located at PMBASE (0x1f.0 0x40.l) - OperationRegion(PMIO, SystemIO, DEFAULT_PMBASE, 0x80) - Field(PMIO, ByteAcc, NoLock, Preserve) - { - Offset(0x20), // GPE0_STS - , 16, - GS00, 1, // GPIO00 SCI/Wake Status - GS01, 1, // GPIO01 SCI/Wake Status - GS02, 1, // GPIO02 SCI/Wake Status - GS03, 1, // GPIO03 SCI/Wake Status - GS04, 1, // GPIO04 SCI/Wake Status - GS05, 1, // GPIO05 SCI/Wake Status - GS06, 1, // GPIO06 SCI/Wake Status - GS07, 1, // GPIO07 SCI/Wake Status - GS08, 1, // GPIO08 SCI/Wake Status - GS09, 1, // GPIO09 SCI/Wake Status - GS10, 1, // GPIO10 SCI/Wake Status - GS11, 1, // GPIO11 SCI/Wake Status - GS12, 1, // GPIO12 SCI/Wake Status - GS13, 1, // GPIO13 SCI/Wake Status - GS14, 1, // GPIO14 SCI/Wake Status - GS15, 1, // GPIO15 SCI/Wake Status - Offset(0x28), // GPE0_EN - , 16, - GE00, 1, // GPIO00 SCI/Wake Enable - GE01, 1, // GPIO01 SCI/Wake Enable - GE02, 1, // GPIO02 SCI/Wake Enable - GE03, 1, // GPIO03 SCI/Wake Enable - GE04, 1, // GPIO04 SCI/Wake Enable - GE05, 1, // GPIO05 SCI/Wake Enable - GE06, 1, // GPIO06 SCI/Wake Enable - GE07, 1, // GPIO07 SCI/Wake Enable - GE08, 1, // GPIO08 SCI/Wake Enable - GE09, 1, // GPIO09 SCI/Wake Enable - GE10, 1, // GPIO10 SCI/Wake Enable - GE11, 1, // GPIO11 SCI/Wake Enable - GE12, 1, // GPIO12 SCI/Wake Enable - GE13, 1, // GPIO13 SCI/Wake Enable - GE14, 1, // GPIO14 SCI/Wake Enable - GE15, 1, // GPIO15 SCI/Wake Enable - Offset(0x42), // General Purpose Control - , 1, // skip 1 bit - GPEC, 1, // SWGPE_CTRL - } - - // GPIO IO mapped registers (0x1f.0 reg 0x48.l) - OperationRegion(GPIO, SystemIO, DEFAULT_GPIOBASE, 0x6c) - Field(GPIO, ByteAcc, NoLock, Preserve) - { - Offset(0x00), // GPIO Use Select - GU00, 8, - GU01, 8, - GU02, 8, - GU03, 8, - Offset(0x04), // GPIO IO Select - GIO0, 8, - GIO1, 8, - GIO2, 8, - GIO3, 8, - Offset(0x0c), // GPIO Level - GL00, 1, - GP01, 1, - GP02, 1, - GP03, 1, - GP04, 1, - GP05, 1, - GP06, 1, - GP07, 1, - GP08, 1, - GP09, 1, - GP10, 1, - GP11, 1, - GP12, 1, - GP13, 1, - GP14, 1, - GP15, 1, - GP16, 1, - GP17, 1, - GP18, 1, - GP19, 1, - GP20, 1, - GP21, 1, - GP22, 1, - GP23, 1, - GP24, 1, - GP25, 1, - GP26, 1, - GP27, 1, - GP28, 1, - GP29, 1, - GP30, 1, - GP31, 1, - Offset(0x18), // GPIO Blink - GB00, 8, - GB01, 8, - GB02, 8, - GB03, 8, - Offset(0x2c), // GPIO Invert - GIV0, 8, - GIV1, 8, - GIV2, 8, - GIV3, 8, - Offset(0x30), // GPIO Use Select 2 - GU04, 8, - GU05, 8, - GU06, 8, - GU07, 8, - Offset(0x34), // GPIO IO Select 2 - GIO4, 8, - GIO5, 8, - GIO6, 8, - GIO7, 8, - Offset(0x38), // GPIO Level 2 - GP32, 1, - GP33, 1, - GP34, 1, - GP35, 1, - GP36, 1, - GP37, 1, - GP38, 1, - GP39, 1, - GP40, 1, - GP41, 1, - GP42, 1, - GP43, 1, - GP44, 1, - GP45, 1, - GP46, 1, - GP47, 1, - GP48, 1, - GP49, 1, - GP50, 1, - GP51, 1, - GP52, 1, - GP53, 1, - GP54, 1, - GP55, 1, - GP56, 1, - GP57, 1, - GP58, 1, - GP59, 1, - GP60, 1, - GP61, 1, - GP62, 1, - GP63, 1, - Offset(0x40), // GPIO Use Select 3 - GU08, 8, - GU09, 4, - Offset(0x44), // GPIO IO Select 3 - GIO8, 8, - GIO9, 4, - Offset(0x48), // GPIO Level 3 - GP64, 1, - GP65, 1, - GP66, 1, - GP67, 1, - GP68, 1, - GP69, 1, - GP70, 1, - GP71, 1, - GP72, 1, - GP73, 1, - GP74, 1, - GP75, 1, - } - - - // ICH7 Root Complex Register Block. Memory Mapped through RCBA) - OperationRegion(RCRB, SystemMemory, DEFAULT_RCBA, 0x4000) - Field(RCRB, DWordAcc, Lock, Preserve) - { - Offset(0x0000), // Backbone - Offset(0x1000), // Chipset - Offset(0x3000), // Legacy Configuration Registers - Offset(0x3404), // High Performance Timer Configuration - HPAS, 2, // Address Select - , 5, - HPTE, 1, // Address Enable - Offset(0x3418), // FD (Function Disable) - , 1, // Reserved - PCID, 1, // PCI bridge disable - SA1D, 1, // SATA1 disable - SMBD, 1, // SMBUS disable - HDAD, 1, // Azalia disable - , 8, // Reserved - EH2D, 1, // EHCI #2 disable - LPBD, 1, // LPC bridge disable - EH1D, 1, // EHCI #1 disable - RP1D, 1, // Root Port 1 disable - RP2D, 1, // Root Port 2 disable - RP3D, 1, // Root Port 3 disable - RP4D, 1, // Root Port 4 disable - RP5D, 1, // Root Port 5 disable - RP6D, 1, // Root Port 6 disable - RP7D, 1, // Root Port 7 disable - RP8D, 1, // Root Port 8 disable - TTRD, 1, // Thermal sensor registers disable - SA2D, 1, // SATA2 disable - Offset(0x3428), // FD2 (Function Disable 2) - BDFD, 1, // Display BDF - ME1D, 1, // ME Interface 1 disable - ME2D, 1, // ME Interface 2 disable - IDRD, 1, // IDE redirect disable - KTCT, 1, // Keyboard Text redirect disable - } -} - -// High Definition Audio (Azalia) 0:1b.0 -#include "audio.asl" - -// PCI Express Ports 0:1c.x -#include "pcie.asl" - -// USB 0:1d.0 and 0:1a.0 -#include "usb.asl" - -// LPC Bridge 0:1f.0 -#include "lpc.asl" - -// SATA 0:1f.2, 0:1f.5 -#include "sata.asl" - -// SMBus 0:1f.3 -#include "smbus.asl" - -Method (_OSC, 4) -{ - /* Check for proper GUID */ - If (LEqual (Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) - { - /* Let OS control everything */ - Return (Arg3) - } - Else - { - /* Unrecognized UUID */ - CreateDWordField (Arg3, 0, CDW1) - Or (CDW1, 4, CDW1) - Return (Arg3) - } -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl deleted file mode 100644 index 33440c3bba..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie.asl +++ /dev/null @@ -1,217 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel 6/7 Series PCH PCIe support */ - -// PCI Express Ports - -Method (IRQM, 1, Serialized) { - - /* Interrupt Map INTA->INTA, INTB->INTB, INTC->INTC, INTD->INTD */ - Name (IQAA, Package() { - Package() { 0x0000ffff, 0, 0, 16 }, - Package() { 0x0000ffff, 1, 0, 17 }, - Package() { 0x0000ffff, 2, 0, 18 }, - Package() { 0x0000ffff, 3, 0, 19 } }) - Name (IQAP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKD, 0 } }) - - /* Interrupt Map INTA->INTB, INTB->INTC, INTC->INTD, INTD->INTA */ - Name (IQBA, Package() { - Package() { 0x0000ffff, 0, 0, 17 }, - Package() { 0x0000ffff, 1, 0, 18 }, - Package() { 0x0000ffff, 2, 0, 19 }, - Package() { 0x0000ffff, 3, 0, 16 } }) - Name (IQBP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKA, 0 } }) - - /* Interrupt Map INTA->INTC, INTB->INTD, INTC->INTA, INTD->INTB */ - Name (IQCA, Package() { - Package() { 0x0000ffff, 0, 0, 18 }, - Package() { 0x0000ffff, 1, 0, 19 }, - Package() { 0x0000ffff, 2, 0, 16 }, - Package() { 0x0000ffff, 3, 0, 17 } }) - Name (IQCP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKB, 0 } }) - - /* Interrupt Map INTA->INTD, INTB->INTA, INTC->INTB, INTD->INTC */ - Name (IQDA, Package() { - Package() { 0x0000ffff, 0, 0, 19 }, - Package() { 0x0000ffff, 1, 0, 16 }, - Package() { 0x0000ffff, 2, 0, 17 }, - Package() { 0x0000ffff, 3, 0, 18 } }) - Name (IQDP, Package() { - Package() { 0x0000ffff, 0, \_SB.PCI0.LPCB.LNKD, 0 }, - Package() { 0x0000ffff, 1, \_SB.PCI0.LPCB.LNKA, 0 }, - Package() { 0x0000ffff, 2, \_SB.PCI0.LPCB.LNKB, 0 }, - Package() { 0x0000ffff, 3, \_SB.PCI0.LPCB.LNKC, 0 } }) - - Switch (ToInteger (Arg0)) { - /* PCIe Root Port 1 and 5 */ - Case (Package() { 1, 5 }) { - If (PICM) { - Return (IQAA) - } Else { - Return (IQAP) - } - } - - /* PCIe Root Port 2 and 6 */ - Case (Package() { 2, 6 }) { - If (PICM) { - Return (IQBA) - } Else { - Return (IQBP) - } - } - - /* PCIe Root Port 3 and 7 */ - Case (Package() { 3, 7 }) { - If (PICM) { - Return (IQCA) - } Else { - Return (IQCP) - } - } - - /* PCIe Root Port 4 and 8 */ - Case (Package() { 4, 8 }) { - If (PICM) { - Return (IQDA) - } Else { - Return (IQDP) - } - } - - Default { - If (PICM) { - Return (IQDA) - } Else { - Return (IQDP) - } - } - } -} - -Device (RP01) -{ - Name (_ADR, 0x001c0000) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP02) -{ - Name (_ADR, 0x001c0001) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP03) -{ - Name (_ADR, 0x001c0002) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP04) -{ - Name (_ADR, 0x001c0003) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP05) -{ - Name (_ADR, 0x001c0004) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP06) -{ - Name (_ADR, 0x001c0005) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP07) -{ - Name (_ADR, 0x001c0006) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} - -Device (RP08) -{ - Name (_ADR, 0x001c0007) - - #include "pcie_port.asl" - - Method (_PRT) - { - Return (IRQM (RPPN)) - } -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl deleted file mode 100644 index 276227bb50..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/pcie_port.asl +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Included in each PCIe Root Port device */ - -OperationRegion (RPCS, PCI_Config, 0x00, 0xFF) -Field (RPCS, AnyAcc, NoLock, Preserve) -{ - Offset (0x4c), // Link Capabilities - , 24, - RPPN, 8, // Root Port Number -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl deleted file mode 100644 index fb685a38fb..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/sata.asl +++ /dev/null @@ -1,81 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel SATA Controller 0:1f.2 - -// Note: Some BIOSes put the S-ATA code into an SSDT to make it easily -// pluggable - -Device (SATA) -{ - Name (_ADR, 0x001f0002) - - Device (PRID) - { - Name (_ADR, 0) - - // Get Timing Mode - Method (_GTM) - { - Name(PBUF, Buffer(20) { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00 }) - - CreateDwordField (PBUF, 0, PIO0) - CreateDwordField (PBUF, 4, DMA0) - CreateDwordField (PBUF, 8, PIO1) - CreateDwordField (PBUF, 12, DMA1) - CreateDwordField (PBUF, 16, FLAG) - - // TODO fill return structure - - Return (PBUF) - } - - // Set Timing Mode - Method (_STM, 3) - { - CreateDwordField (Arg0, 0, PIO0) - CreateDwordField (Arg0, 4, DMA0) - CreateDwordField (Arg0, 8, PIO1) - CreateDwordField (Arg0, 12, DMA1) - CreateDwordField (Arg0, 16, FLAG) - - // TODO: Do the deed - } - - Device (DSK0) - { - Name (_ADR, 0) - // TODO: _RMV ? - // TODO: _GTF ? - } - - Device (DSK1) - { - Name (_ADR, 1) - - // TODO: _RMV ? - // TODO: _GTF ? - } - - } -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl deleted file mode 100644 index aabb397144..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/sleepstates.asl +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -Name(\_S0, Package(){0x0,0x0,0x0,0x0}) - -/* - * S1 and S3 sleep states are not supported - * Name(\_S1, Package(){0x1,0x1,0x0,0x0}) - * Name(\_S3, Package(){0x5,0x5,0x0,0x0}) - */ - -Name(\_S4, Package(){0x6,0x6,0x0,0x0}) -Name(\_S5, Package(){0x7,0x7,0x0,0x0}) diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl deleted file mode 100644 index efd323dea5..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/smbus.asl +++ /dev/null @@ -1,240 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -// Intel SMBus Controller 0:1f.3 - -Device (SBUS) -{ - Name (_ADR, 0x001f0003) - -#ifdef ENABLE_SMBUS_METHODS - OperationRegion (SMBP, PCI_Config, 0x00, 0x100) - Field(SMBP, DWordAcc, NoLock, Preserve) - { - Offset(0x40), - , 2, - I2CE, 1 - } - - OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20) - Field (SMBI, ByteAcc, NoLock, Preserve) - { - HSTS, 8, // Host Status - , 8, - HCNT, 8, // Host Control - HCMD, 8, // Host Command - TXSA, 8, // Transmit Slave Address - DAT0, 8, // Host Data 0 - DAT1, 8, // Host Data 1 - HBDB, 8, // Host Block Data Byte - PECK, 8, // Packet Error Check - RXSA, 8, // Receive Slave Address - RXDA, 16, // Receive Slave Data - AUXS, 8, // Auxiliary Status - AUXC, 8, // Auxiliary Control - SLPC, 8, // SMLink Pin Control - SBPC, 8, // SMBus Pin Control - SSTS, 8, // Slave Status - SCMD, 8, // Slave Command - NADR, 8, // Notify Device Address - NDLB, 8, // Notify Data Low Byte - NDLH, 8, // Notify Data High Byte - } - - // Kill all SMBus communication - Method (KILL, 0, Serialized) - { - Or (HCNT, 0x02, HCNT) // Send Kill - Or (HSTS, 0xff, HSTS) // Clean Status - } - - // Check if last operation completed - // return Failure = 0, Success = 1 - Method (CMPL, 0, Serialized) - { - Store (4000, Local0) // Timeout 200ms in 50us steps - While (Local0) { - If (And(HSTS, 0x02)) { // Completion Status? - Return (1) // Operation Completed - } Else { - Stall (50) - Decrement (Local0) - If (LEqual(Local0, 0)) { - KILL() - } - } - } - - Return (0) // Failure - } - - - // Wait for SMBus to become ready - Method (SRDY, 0, Serialized) - { - Store (200, Local0) // Timeout 200ms - While (Local0) { - If (And(HSTS, 0x40)) { // IN_USE? - Sleep(1) // Wait 1ms - Decrement(Local0) // timeout-- - If (LEqual(Local0, 0)) { - Return (1) - } - } Else { - Store (0, Local0) // We're ready - } - } - - Store (4000, Local0) // Timeout 200ms (50us * 4000) - While (Local0) { - If (And (HSTS, 0x01)) { // Host Busy? - Stall(50) // Wait 50us - Decrement(Local0) // timeout-- - If (LEqual(Local0, 0)) { - KILL() - } - } Else { - Return (0) // Success - } - } - - Return (1) // Failure - } - - // SMBus Send Byte - // Arg0: Address - // Arg1: Data - // Return: 1 = Success, 0=Failure - - Method (SSXB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0) - } - - // Send Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Arg0, TXSA) // Write Address - Store (Arg1, HCMD) // Write Data - - Store (0x48, HCNT) // Start + Byte Data Protocol - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (1) // Success - } - - Return (0) - } - - - // SMBus Receive Byte - // Arg0: Address - // Return: 0xffff = Failure, Data (8bit) = Success - - Method (SRXB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0xffff) - } - - // Receive Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Or (Arg0, 1), TXSA) // Write Address - - Store (0x44, HCNT) // Start - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (DAT0) // Success - } - - Return (0xffff) - } - - - // SMBus Write Byte - // Arg0: Address - // Arg1: Command - // Arg2: Data - // Return: 1 = Success, 0=Failure - - Method (SWRB, 3, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0) - } - - // Send Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Arg0, TXSA) // Write Address - Store (Arg1, HCMD) // Write Command - Store (Arg2, DAT0) // Write Data - - Store (0x48, HCNT) // Start + Byte Protocol - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (1) // Success - } - - Return (0) - } - - - // SMBus Read Byte - // Arg0: Address - // Arg1: Command - // Return: 0xffff = Failure, Data (8bit) = Success - - Method (SRDB, 2, Serialized) - { - - // Is the SMBus Controller Ready? - If (SRDY()) { - Return (0xffff) - } - - // Receive Byte - Store (0, I2CE) // SMBus Enable - Store (0xbf, HSTS) - Store (Or (Arg0, 1), TXSA) // Write Address - Store (Arg1, HCMD) // Command - - Store (0x48, HCNT) // Start - - If (CMPL()) { - Or (HSTS, 0xff, HSTS) // Clean up - Return (DAT0) // Success - } - - Return (0xffff) - } -#endif -} diff --git a/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl b/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl deleted file mode 100644 index 9ff6d9083c..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/acpi/usb.asl +++ /dev/null @@ -1,89 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* Intel Cougar Point USB support */ - -// EHCI Controller 0:1d.0 - -Device (EHC1) -{ - Name(_ADR, 0x001d0000) - - Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake - - // Leave USB ports on for to allow Wake from USB - - Method(_S3D,0) // Highest D State in S3 State - { - Return (2) - } - - Method(_S4D,0) // Highest D State in S4 State - { - Return (2) - } - - Device (HUB7) - { - Name (_ADR, 0x00000000) - - // How many are there? - Device (PRT1) { Name (_ADR, 1) } // USB Port 0 - Device (PRT2) { Name (_ADR, 2) } // USB Port 1 - Device (PRT3) { Name (_ADR, 3) } // USB Port 2 - Device (PRT4) { Name (_ADR, 4) } // USB Port 3 - Device (PRT5) { Name (_ADR, 5) } // USB Port 4 - Device (PRT6) { Name (_ADR, 6) } // USB Port 5 - } -} - -// EHCI #2 Controller 0:1a.0 - -Device (EHC2) -{ - Name(_ADR, 0x001a0000) - - Name (_PRW, Package(){ 13, 4 }) // Power Resources for Wake - - // Leave USB ports on for to allow Wake from USB - - Method(_S3D,0) // Highest D State in S3 State - { - Return (2) - } - - Method(_S4D,0) // Highest D State in S4 State - { - Return (2) - } - - Device (HUB7) - { - Name (_ADR, 0x00000000) - - // How many are there? - Device (PRT1) { Name (_ADR, 1) } // USB Port 0 - Device (PRT2) { Name (_ADR, 2) } // USB Port 1 - Device (PRT3) { Name (_ADR, 3) } // USB Port 2 - Device (PRT4) { Name (_ADR, 4) } // USB Port 3 - Device (PRT5) { Name (_ADR, 5) } // USB Port 4 - Device (PRT6) { Name (_ADR, 6) } // USB Port 5 - } -} diff --git a/src/southbridge/intel/fsp_bd82x6x/azalia.c b/src/southbridge/intel/fsp_bd82x6x/azalia.c deleted file mode 100644 index b6f728c4a8..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/azalia.c +++ /dev/null @@ -1,371 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008 Advanced Micro Devices, Inc. - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2011 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" - -#define HDA_ICII_REG 0x68 -#define HDA_ICII_BUSY (1 << 0) -#define HDA_ICII_VALID (1 << 1) - -typedef struct southbridge_intel_bd82x6x_config config_t; - -static int set_bits(void *port, u32 mask, u32 val) -{ - u32 reg32; - int count; - - /* Write (val & mask) to port */ - val &= mask; - reg32 = read32(port); - reg32 &= ~mask; - reg32 |= val; - write32(port, reg32); - - /* Wait for readback of register to - * match what was just written to it - */ - count = 50; - do { - /* Wait 1ms based on BKDG wait time */ - mdelay(1); - reg32 = read32(port); - reg32 &= mask; - } while ((reg32 != val) && --count); - - /* Timeout occurred */ - if (!count) - return -1; - return 0; -} - -static int codec_detect(u8 *base) -{ - u8 reg8; - - /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ - if (set_bits(base + 0x08, 1, 1) == -1) - goto no_codec; - - /* Write back the value once reset bit is set. */ - write16(base + 0x0, - read16(base + 0x0)); - - /* Read in Codec location (BAR + 0xe)[2..0]*/ - reg8 = read8(base + 0xe); - reg8 &= 0x0f; - if (!reg8) - goto no_codec; - - return reg8; - -no_codec: - /* Codec Not found */ - /* Put HDA back in reset (BAR + 0x8) [0] */ - set_bits(base + 0x08, 1, 0); - printk(BIOS_DEBUG, "Azalia: No codec!\n"); - return 0; -} - -static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb) -{ - int idx=0; - - while (idx < (cim_verb_data_size / sizeof(u32))) { - u32 verb_size = 4 * cim_verb_data[idx+2]; // in u32 - if (cim_verb_data[idx] != viddid) { - idx += verb_size + 3; // skip verb + header - continue; - } - *verb = &cim_verb_data[idx+3]; - return verb_size; - } - - /* Not all codecs need to load another verb */ - return 0; -} - -/** - * Wait 50usec for the codec to indicate it is ready - * no response would imply that the codec is non-operative - */ - -static int wait_for_ready(u8 *base) -{ - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - - while(timeout--) { - u32 reg32 = read32(base + HDA_ICII_REG); - if (!(reg32 & HDA_ICII_BUSY)) - return 0; - udelay(1); - } - - return -1; -} - -/** - * Wait 50usec for the codec to indicate that it accepted - * the previous command. No response would imply that the code - * is non-operative - */ - -static int wait_for_valid(u8 *base) -{ - u32 reg32; - - /* Send the verb to the codec */ - reg32 = read32(base + HDA_ICII_REG); - reg32 |= HDA_ICII_BUSY | HDA_ICII_VALID; - write32(base + HDA_ICII_REG, reg32); - - /* Use a 50 usec timeout - the Linux kernel uses the - * same duration */ - - int timeout = 50; - while(timeout--) { - reg32 = read32(base + HDA_ICII_REG); - if ((reg32 & (HDA_ICII_VALID | HDA_ICII_BUSY)) == - HDA_ICII_VALID) - return 0; - udelay(1); - } - - return -1; -} - -static void codec_init(struct device *dev, u8 *base, int addr) -{ - u32 reg32; - const u32 *verb; - u32 verb_size; - int i; - - printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); - - /* 1 */ - if (wait_for_ready(base) == -1) { - printk(BIOS_DEBUG, " codec not ready.\n"); - return; - } - - reg32 = (addr << 28) | 0x000f0000; - write32(base + 0x60, reg32); - - if (wait_for_valid(base) == -1) { - printk(BIOS_DEBUG, " codec not valid.\n"); - return; - } - - reg32 = read32(base + 0x64); - - /* 2 */ - printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); - verb_size = find_verb(dev, reg32, &verb); - - if (!verb_size) { - printk(BIOS_DEBUG, "Azalia: No verb!\n"); - return; - } - printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); - - /* 3 */ - for (i = 0; i < verb_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, verb[i]); - - if (wait_for_valid(base) == -1) - return; - } - printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); -} - -static void codecs_init(struct device *dev, u8 *base, u32 codec_mask) -{ - int i; - for (i = 3; i >= 0; i--) { - if (codec_mask & (1 << i)) - codec_init(dev, base, i); - } - - for (i = 0; i < pc_beep_verbs_size; i++) { - if (wait_for_ready(base) == -1) - return; - - write32(base + 0x60, pc_beep_verbs[i]); - - if (wait_for_valid(base) == -1) - return; - } -} - -static void azalia_init(struct device *dev) -{ - u8 *base; - struct resource *res; - u32 codec_mask; - u8 reg8; - u16 reg16; - u32 reg32; - - /* Find base address */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res) - return; - - // NOTE this will break as soon as the Azalia get's a bar above - // 4G. Is there anything we can do about it? - base = res2mmio(res, 0, 0); - printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); - - if (RCBA32(0x2030) & (1 << 31)) { - reg32 = pci_mmio_read_config32(dev, 0x120); - reg32 &= 0xf8ffff01; - reg32 |= (1 << 24); // 25 for server - reg32 |= RCBA32(0x2030) & 0xfe; - pci_mmio_write_config32(dev, 0x120, reg32); - - reg16 = pci_mmio_read_config16(dev, 0x78); - reg16 &= ~(1 << 11); - pci_mmio_write_config16(dev, 0x78, reg16); - } else - printk(BIOS_DEBUG, "Azalia: V1CTL disabled.\n"); - - reg32 = pci_mmio_read_config32(dev, 0x114); - reg32 &= ~0xfe; - pci_mmio_write_config32(dev, 0x114, reg32); - - // Set VCi enable bit - if (pci_mmio_read_config32(dev, 0x120) & ((1 << 24) | - (1 << 25) | (1 << 26))) { - reg32 = pci_mmio_read_config32(dev, 0x120); - reg32 |= (1 << 31); - pci_mmio_write_config32(dev, 0x120, reg32); - } - - // Enable HDMI codec: - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 1); - pci_write_config32(dev, 0xc4, reg32); - - reg8 = pci_read_config8(dev, 0x43); - reg8 |= (1 << 6); - pci_write_config8(dev, 0x43, reg8); - - /* Additional programming steps */ - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 13) | (1 << 10); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xd0); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0xd0, reg32); - - /* Additional programming steps */ - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 13); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xc4); - reg32 |= (1 << 10); - pci_write_config32(dev, 0xc4, reg32); - - reg32 = pci_read_config32(dev, 0xd0); - reg32 &= ~(1 << 31); - pci_write_config32(dev, 0xd0, reg32); - - /* Set Bus Master */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); - - pci_write_config8(dev, 0x3c, 0x0a); // unused? - - /* Codec Initialization Programming Sequence */ - reg32 = read32(base + 0x08); - reg32 |= (1 << 0); - write32(base + 0x08, reg32); - - // - reg8 = pci_read_config8(dev, 0x40); // Audio Control - reg8 |= 1; // Select Azalia mode. This needs to be controlled via devicetree.cb - pci_write_config8(dev, 0x40, reg8); - - reg8 = pci_read_config8(dev, 0x4d); // Docking Status - reg8 &= ~(1 << 7); // Docking not supported - pci_write_config8(dev, 0x4d, reg8); - - codec_mask = codec_detect(base); - - if (codec_mask) { - printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); - codecs_init(dev, base, codec_mask); - } - - /* Enable dynamic clock gating */ - reg8 = pci_read_config8(dev, 0x43); - reg8 &= ~0x7; - reg8 |= (1 << 2) | (1 << 0); - pci_write_config8(dev, 0x43, reg8); -} - -static void azalia_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations azalia_pci_ops = { - .set_subsystem = azalia_set_subsystem, -}; - -static struct device_operations azalia_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = azalia_init, - .scan_bus = 0, - .ops_pci = &azalia_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { 0x1c20, 0x1e20, 0 }; - -static const struct pci_driver pch_azalia __pci_driver = { - .ops = &azalia_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/southbridge/intel/fsp_bd82x6x/bootblock.c b/src/southbridge/intel/fsp_bd82x6x/bootblock.c deleted file mode 100644 index 8f6ddbc67f..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/bootblock.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include "pch.h" - -static void store_initial_timestamp(void) -{ - /* On Cougar Point / Panther Point, there are two 32bit scratchpad registers: - * D0:F0 0xdc (SKPAD) - * D31:F2 0xd0 (SATA SP) - */ - tsc_t tsc = rdtsc(); - /* - * The scratchpad register at D0F0DC is used by the FSP. The system will - * not boot if the scratchpad register is not 0. Because of this we're - * only storing the low nibble of the high dword of the tsc. Even this - * is probably 0 by the time we get here, so storing 64 bits is overkill.S - */ - pci_write_config32(PCI_DEV(0, 0x1f, 2), 0xd0, tsc.lo >> 4 | tsc.hi << 28); -} - -/* - * Enable Prefetching and Caching. - */ -static void enable_spi_prefetch(void) -{ - u8 reg8; - pci_devfn_t dev; - - dev = PCI_DEV(0, 0x1f, 0); - - reg8 = pci_read_config8(dev, 0xdc); - reg8 &= ~(3 << 2); - reg8 |= (2 << 2); /* Prefetching and Caching Enabled */ - pci_write_config8(dev, 0xdc, reg8); -} - -static void enable_port80_on_lpc(void) -{ - pci_devfn_t dev = PCI_DEV(0, 0x1f, 0); - - /* Enable port 80 POST on LPC */ - pci_write_config32(dev, RCBA, (uintptr_t)DEFAULT_RCBA | 1); - volatile u32 *gcs = (volatile u32 *)(DEFAULT_RCBA + GCS); - u32 reg32 = *gcs; - reg32 = reg32 & ~0x04; - *gcs = reg32; -} - -static void set_spi_speed(void) -{ - u32 fdod; - u8 ssfc; - - /* Observe SPI Descriptor Component Section 0 */ - RCBA32(0x38b0) = 0x1000; - - /* Extract the Write/Erase SPI Frequency from descriptor */ - fdod = RCBA32(0x38b4); - fdod >>= 24; - fdod &= 7; - - /* Set Software Sequence frequency to match */ - ssfc = RCBA8(0x3893); - ssfc &= ~7; - ssfc |= fdod; - RCBA8(0x3893) = ssfc; -} - -static void bootblock_southbridge_init(void) -{ - store_initial_timestamp(); - - enable_spi_prefetch(); - enable_port80_on_lpc(); - set_spi_speed(); - - /* Enable upper 128bytes of CMOS */ - RCBA32(RC) = (1 << 2); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/chip.h b/src/southbridge/intel/fsp_bd82x6x/chip.h deleted file mode 100644 index 040a35f8c7..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/chip.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef SOUTHBRIDGE_INTEL_FSP_BD82X6X_CHIP_H -#define SOUTHBRIDGE_INTEL_FSP_BD82X6X_CHIP_H - -struct southbridge_intel_fsp_bd82x6x_config { - /** - * Interrupt Routing configuration - * If bit7 is 1, the interrupt is disabled. - */ - uint8_t pirqa_routing; - uint8_t pirqb_routing; - uint8_t pirqc_routing; - uint8_t pirqd_routing; - uint8_t pirqe_routing; - uint8_t pirqf_routing; - uint8_t pirqg_routing; - uint8_t pirqh_routing; - - /** - * GPI Routing configuration - * - * Only the lower two bits have a meaning: - * 00: No effect - * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) - * 10: SCI (if corresponding GPIO_EN bit is also set) - * 11: reserved - */ - uint8_t gpi0_routing; - uint8_t gpi1_routing; - uint8_t gpi2_routing; - uint8_t gpi3_routing; - uint8_t gpi4_routing; - uint8_t gpi5_routing; - uint8_t gpi6_routing; - uint8_t gpi7_routing; - uint8_t gpi8_routing; - uint8_t gpi9_routing; - uint8_t gpi10_routing; - uint8_t gpi11_routing; - uint8_t gpi12_routing; - uint8_t gpi13_routing; - uint8_t gpi14_routing; - uint8_t gpi15_routing; - - uint32_t gpe0_en; - uint16_t alt_gp_smi_en; - - /* IDE configuration */ - uint32_t ide_legacy_combined; - uint32_t sata_ahci; - uint8_t sata_port_map; - uint32_t sata_port0_gen3_tx; - uint32_t sata_port1_gen3_tx; - - uint32_t gen1_dec; - uint32_t gen2_dec; - uint32_t gen3_dec; - uint32_t gen4_dec; - - /* Enable linear PCIe Root Port function numbers starting at zero */ - uint8_t pcie_port_coalesce; - - /* Override PCIe ASPM */ - uint8_t pcie_aspm_f0; - uint8_t pcie_aspm_f1; - uint8_t pcie_aspm_f2; - uint8_t pcie_aspm_f3; - uint8_t pcie_aspm_f4; - uint8_t pcie_aspm_f5; - uint8_t pcie_aspm_f6; - uint8_t pcie_aspm_f7; - - int p_cnt_throttling_supported; - int c2_latency; -}; - -#endif /* SOUTHBRIDGE_INTEL_BD82X6X_CHIP_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/early_init.c b/src/southbridge/intel/fsp_bd82x6x/early_init.c deleted file mode 100644 index b830027edc..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/early_init.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007-2010 coresystems GmbH - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include "pch.h" - -#define FD_ENTRIES 32 -#define FD2_ENTRIES 5 - -const static char *fd_set_strings[FD_ENTRIES] = { - "", - "PCI Bridge (D30:F0) Disabled\n", - "SATA 1(D31:F2) Disabled\n", - "SMBus Config space Disabled\n", - "High Definition Audio Disabled\n", - "Reserved bit 5 set\n", - "Reserved bit 6 set\n", - "Reserved bit 7 set\n", - "Reserved bit 8 set\n", - "Reserved bit 9 set\n", - "Reserved bit 10 set\n", - "Reserved bit 11 set\n", - "Reserved bit 12 set\n", - "EHCI #2 Disabled\n", - "LPC Bridge Disabled\n", - "EHCI #1 Disabled\n", - "PCIe bridge 1 Disabled\n", - "PCIe bridge 2 Disabled\n", - "PCIe bridge 3 Disabled\n", - "PCIe bridge 4 Disabled\n", - "PCIe bridge 5 Disabled\n", - "PCIe bridge 6 Disabled\n", - "PCIe bridge 7 Disabled\n", - "PCIe bridge 8 Disabled\n", - "Thermal Sensor (D31:F6) Registers Disabled\n", - "SATA 2 (D31:F5) Disabled\n", - "Reserved bit 26 set\n", - "Reserved bit 27 set\n", - "Reserved bit 28 set\n", - "Reserved bit 29 set\n", - "Reserved bit 30 set\n", - "Reserved bit 31 set\n", -}; - -const static char *fd_notset_strings[FD_ENTRIES] = { - "ERROR: Required field NOT programmed\n", - "PCI Bridge (D30:F0) enabled\n", - "SATA 1(D31:F2) enabled\n", - "SMBus Config space enabled\n", - "High Definition Audio enabled\n", - "", - "", - "", - "", - "", - "", - "", - "", - "EHCI #2 Enabled\n", - "LPC Bridge Enabled\n", - "EHCI #1 Enabled\n", - "PCIe bridge 1 Enabled\n", - "PCIe bridge 2 Enabled\n", - "PCIe bridge 3 Enabled\n", - "PCIe bridge 4 Enabled\n", - "PCIe bridge 5 Enabled\n", - "PCIe bridge 6 Enabled\n", - "PCIe bridge 7 Enabled\n", - "PCIe bridge 8 Enabled\n", - "Thermal Sensor (D31:F6) Registers Enabled\n", - "SATA 2 (D31:F5) Enabled\n", - "", - "", - "", - "", - "", - "", -}; - -const static char *fd2_set_strings[FD2_ENTRIES] = { - "Display BDF Enabled\n", - "MEI #1 (D22:F0) Disabled\n", - "MEI #2 (D22:F1) Disabled\n", - "IDE-R (D22:F2) Disabled\n", - "KT (D22:F3) Disabled\n" -}; - -const static char *fd2_notset_strings[FD2_ENTRIES] = { - "Display BDF Disabled\n", - "MEI #1 (D22:F0) Enabled\n", - "MEI #2 (D22:F1) Enabled\n", - "IDE-R (D22:F2) Enabled\n", - "KT (D22:F3) Enabled\n" -}; - -void display_fd_settings(void) -{ - u32 reg32; - int i; - - reg32 = RCBA32(FD); - for (i = 0; i < FD_ENTRIES; i++) { - if (reg32 & (1 << i)) { - printk(BIOS_SPEW, "%s", fd_set_strings[i]); - } else { - printk(BIOS_SPEW, "%s", fd_notset_strings[i]); - } - } - - reg32 = RCBA32(FD2); - for (i = 0; i < FD2_ENTRIES; i++) { - if (reg32 & (1 << i)) { - printk(BIOS_SPEW, "%s", fd2_set_strings[i]); - } else { - printk(BIOS_SPEW, "%s", fd2_notset_strings[i]); - } - } -} - -static void sandybridge_setup_bars(void) -{ - /* Setting up Southbridge. */ - printk(BIOS_DEBUG, "Setting up static southbridge registers..."); - pci_write_config32(PCI_DEV(0, 0x1f, 0), RCBA, (uintptr_t)DEFAULT_RCBA | 1); - - pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1); - pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x44 /* ACPI_CNTL */ , 0x80); /* Enable ACPI BAR */ - - printk(BIOS_DEBUG, " done.\n"); - - printk(BIOS_DEBUG, "Disabling Watchdog reboot..."); - RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */ - outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ - printk(BIOS_DEBUG, " done.\n"); - -#if CONFIG_ELOG_BOOT_COUNT - /* Increment Boot Counter for non-S3 resume */ - if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && - ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) != SLP_TYP_S3) - boot_count_increment(); -#endif - - printk(BIOS_DEBUG, " done.\n"); - -#if CONFIG_ELOG_BOOT_COUNT - /* Increment Boot Counter except when resuming from S3 */ - if ((inw(DEFAULT_PMBASE + PM1_STS) & WAK_STS) && - ((inl(DEFAULT_PMBASE + PM1_CNT) >> 10) & 7) == SLP_TYP_S3) - return; - boot_count_increment(); -#endif -} - -void sandybridge_sb_early_initialization(void) -{ - /* Setup all BARs required for early PCIe and raminit */ - sandybridge_setup_bars(); -} - -void early_pch_init(void) -{ - u8 reg8; - - // reset rtc power status - reg8 = pci_read_config8(PCH_LPC_DEV, 0xa4); - reg8 &= ~(1 << 2); - pci_write_config8(PCH_LPC_DEV, 0xa4, reg8); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_me.c b/src/southbridge/intel/fsp_bd82x6x/early_me.c deleted file mode 100644 index b7dbf3439f..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/early_me.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include "me.h" -#include "pch.h" - -static const char *me_ack_values[] = { - [ME_HFS_ACK_NO_DID] = "No DID Ack received", - [ME_HFS_ACK_RESET] = "Non-power cycle reset", - [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset", - [ME_HFS_ACK_S3] = "Go to S3", - [ME_HFS_ACK_S4] = "Go to S4", - [ME_HFS_ACK_S5] = "Go to S5", - [ME_HFS_ACK_GBL_RESET] = "Global Reset", - [ME_HFS_ACK_CONTINUE] = "Continue to boot" -}; - -static inline void pci_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = pci_read_config32(PCH_ME_DEV, offset); - memcpy(ptr, &dword, sizeof(dword)); -} - -static inline void pci_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - pci_write_config32(PCH_ME_DEV, offset, dword); -} - -void intel_early_me_status(void) -{ - struct me_hfs hfs; - struct me_gmes gmes; - - pci_read_dword_ptr(&hfs, PCI_ME_HFS); - pci_read_dword_ptr(&gmes, PCI_ME_GMES); - - intel_me_status(&hfs, &gmes); -} - -int intel_early_me_init(void) -{ - int count; - struct me_uma uma; - struct me_hfs hfs; - - printk(BIOS_INFO, "Intel ME early init\n"); - - /* Wait for ME UMA SIZE VALID bit to be set */ - for (count = ME_RETRY; count > 0; --count) { - pci_read_dword_ptr(&uma, PCI_ME_UMA); - if (uma.valid) - break; - udelay(ME_DELAY); - } - if (!count) { - printk(BIOS_ERR, "ERROR: ME is not ready!\n"); - return -1; - } - - /* Check for valid firmware */ - pci_read_dword_ptr(&hfs, PCI_ME_HFS); - if (hfs.fpt_bad) { - printk(BIOS_WARNING, "WARNING: ME has bad firmware\n"); - return -1; - } - - printk(BIOS_INFO, "Intel ME firmware is ready\n"); - return 0; -} - -int intel_early_me_uma_size(void) -{ - struct me_uma uma; - - pci_read_dword_ptr(&uma, PCI_ME_UMA); - if (uma.valid) { - printk(BIOS_DEBUG, "ME: Requested %uMB UMA\n", uma.size); - return uma.size; - } - - printk(BIOS_DEBUG, "ME: Invalid UMA size\n"); - return 0; -} - -static inline void set_global_reset(int enable) -{ - u32 etr3 = pci_read_config32(PCH_LPC_DEV, ETR3); - - /* Clear CF9 Without Resume Well Reset Enable */ - etr3 &= ~ETR3_CWORWRE; - - /* CF9GR indicates a Global Reset */ - if (enable) - etr3 |= ETR3_CF9GR; - else - etr3 &= ~ETR3_CF9GR; - - pci_write_config32(PCH_LPC_DEV, ETR3, etr3); -} - -int intel_early_me_init_done(u8 status) -{ - u8 reset; - int count; - u32 mebase_l, mebase_h; - struct me_hfs hfs; - struct me_did did = { - .init_done = ME_INIT_DONE, - .status = status - }; - - /* MEBASE from MESEG_BASE[35:20] */ - mebase_l = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_L); - mebase_h = pci_read_config32(PCI_CPU_DEVICE, PCI_CPU_MEBASE_H) & 0xf; - did.uma_base = (mebase_l >> 20) | (mebase_h << 12); - - /* Send message to ME */ - printk(BIOS_DEBUG, "ME: Sending Init Done with status: %d, " - "UMA base: 0x%04x\n", status, did.uma_base); - - pci_write_dword_ptr(&did, PCI_ME_H_GS); - - /* Must wait for ME acknowledgement */ - for (count = ME_RETRY; count > 0; --count) { - pci_read_dword_ptr(&hfs, PCI_ME_HFS); - if (hfs.bios_msg_ack) - break; - udelay(ME_DELAY); - } - if (!count) { - printk(BIOS_ERR, "ERROR: ME failed to respond\n"); - return -1; - } - - /* Return the requested BIOS action */ - printk(BIOS_NOTICE, "ME: Requested BIOS Action: %s\n", - me_ack_values[hfs.ack_data]); - - /* Check status after acknowledgement */ - intel_early_me_status(); - - reset = 0; - switch (hfs.ack_data) { - case ME_HFS_ACK_CONTINUE: - /* Continue to boot */ - return 0; - case ME_HFS_ACK_RESET: - /* Non-power cycle reset */ - set_global_reset(0); - reset = 0x06; - break; - case ME_HFS_ACK_PWR_CYCLE: - /* Power cycle reset */ - set_global_reset(0); - reset = 0x0e; - break; - case ME_HFS_ACK_GBL_RESET: - /* Global reset */ - set_global_reset(1); - reset = 0x0e; - break; - case ME_HFS_ACK_S3: - case ME_HFS_ACK_S4: - case ME_HFS_ACK_S5: - break; - } - - /* Perform the requested reset */ - if (reset) { - outb(reset, 0xcf9); - halt(); - } - return -1; -} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_smbus.c b/src/southbridge/intel/fsp_bd82x6x/early_smbus.c deleted file mode 100644 index 930c3b437a..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/early_smbus.c +++ /dev/null @@ -1,215 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 Sage Electronic Engineering, LLC - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include "pch.h" - -#define FULL_RW 0x48 -#define QUICK_RW 0x44 - -static void smbus_delay(void) -{ - inb(0xeb); -} - -/** \brief block until the SMBus is no longer busy, or it times out - * - * \param smbus_base IO base address of the SMBus - */ -static int smbus_wait_until_ready(u16 smbus_base) -{ - unsigned loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while (byte & HSTSTS_HOST_BUSY); - return loops ? 0 : -1; -} - -/** \brief block until the SMBus is no longer busy or in use, or it times out - * - * \param smbus_base IO base address of the SMBus - */ -static int smbus_wait_until_done(u16 smbus_base) -{ - unsigned loops = SMBUS_TIMEOUT; - unsigned char byte; - do { - smbus_delay(); - if (--loops == 0) - break; - byte = inb(smbus_base + SMBHSTSTAT); - } while ((byte & HSTSTS_HOST_BUSY) || - (byte & ~(HSTSTS_INUSE_STS | HSTSTS_HOST_BUSY)) == 0); - return loops ? 0 : -1; -} -/** \brief Sets the SMBus BAR, and configures it to run - * - */ -void enable_smbus(void) -{ - device_t dev; - - /* Set the SMBus device statically. */ - dev = PCI_DEV(0x0, 0x1f, 0x3); - - /* Check to make sure we've got the right device. */ - if (pci_read_config16(dev, 0x0) != 0x8086) { - die("SMBus controller not found!"); - } - - /* Set SMBus I/O base. */ - pci_write_config32(dev, SMB_BASE, SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); - - /* Set SMBus enable. */ - pci_write_config8(dev, HOSTC, HST_EN); - - /* Set SMBus I/O space enable. */ - pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); - - /* Disable interrupt generation. */ - outb(0, SMBUS_IO_BASE + SMBHSTCTL); - - /* Clear any lingering errors, so transactions can run. */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - printk(BIOS_DEBUG, "SMBus controller enabled.\n"); -} - -/** \brief generic smbus helper function to read & write to the smbus - * - * \details Configures the SMBus for the transaction, sets up the address - * and data bytes, starts the command, waits for the command to - * finish, and returns data if the command is a read. - * - * \param device The 8-bit device address, with the read / write bit set-up. - * - * \param addr_dat For full reads/writes, this contains the address within - * the device of the byte being read/written. For quick writes, - * this contains the data to write. - * - * \param data For full writes, this contains the Data to write to the - * device. For all other transactions, this is ignored. - * - * \param command Contains the command for a full read/write (0x48) or the - * command for a quick read/write (0x44) - * - * \return Data read from the device, or -1 if there was an error - */ -static s16 smbus_rw_byte(u8 device, u8 addr_dat, u8 data, u8 command) -{ - u8 global_status_register; - - if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) - return SMBUS_WAIT_UNTIL_READY_TIMEOUT; - - /*** Set up transaction ***/ - - /* Disable interrupts */ - outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL); - - /* Set the device being talked to using supplied device address*/ - outb(device, SMBUS_IO_BASE + SMBXMITADD); - - /* Set the address and data byte */ - outb(addr_dat, SMBUS_IO_BASE + SMBHSTCMD); - outb(data, SMBUS_IO_BASE + SMBHSTDAT0); - - /* Clear any lingering errors, so the transaction will run */ - outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); - - /* Start the command */ - outb(command, SMBUS_IO_BASE + SMBHSTCTL); - - /* Poll for transaction completion */ - if (smbus_wait_until_done(SMBUS_IO_BASE) < 0) - return SMBUS_WAIT_UNTIL_DONE_TIMEOUT; - - global_status_register = inb(SMBUS_IO_BASE + SMBHSTSTAT); - - /* Ignore the "In Use" status... */ - global_status_register &= ~(HSTSTS_SMBALERT_STS | HSTSTS_INUSE_STS); - - /* Read results - INTR gets set when a command is completed successfully */ - data = inb(SMBUS_IO_BASE + SMBHSTDAT0); - if (global_status_register != HSTSTS_INTR) - return SMBUS_ERROR; - - return data; -} - -/** \brief Sends an address and writes one byte of data - * - * \param device The 7-bit address of the device being written to - * - * \param address The address within the device to write the data to - * - * \param data The data value to write to the device - * - * \return -1 if there was an error - */ -s16 smbus_write_single_byte(u8 device, u8 address, u8 data) -{ - return (smbus_rw_byte(device << 1, address, data, FULL_RW)); -} - -/** \brief Sends an address and reads one byte of data - * - * \param device The 7-bit address of the device being written to - * - * \param address The address within the device to write the data to - * - * \return Data read from the device, or -1 if there was an error - */ -int smbus_read_byte(unsigned device, unsigned address) -{ - return (smbus_rw_byte((device << 1) | 1, address, 0, FULL_RW)); -} - -/** \brief Sends one byte of data with no address byte - * - * \param device The 7-bit address of the device being written to - * - * \param data The data value to write to the device - * - * \return -1 if there was an error - */ -s16 smbus_quick_write(u8 device, u8 data) -{ - return (smbus_rw_byte(device << 1, data, 0, QUICK_RW)); -} - -/** \brief Reads one byte of data without sending an address byte - * - * \param device The 7-bit address of the device being written to - * - * \return Data read from the device, or -1 if there was an error - */ -s16 smbus_quick_read(u8 device) -{ - return (smbus_rw_byte((device << 1) | 1, 0, 0, QUICK_RW)); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_spi.c b/src/southbridge/intel/fsp_bd82x6x/early_spi.c deleted file mode 100644 index 1ebe044810..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/early_spi.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 Google Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include "pch.h" - -#define SPI_DELAY 10 /* 10us */ -#define SPI_RETRY 200000 /* 2s */ - -static int early_spi_read_block(u32 offset, u8 size, u8 *buffer) -{ - u32 *ptr32 = (u32*)buffer; - u32 i; - - /* Clear status bits */ - RCBA16(SPIBAR_HSFS) |= SPIBAR_HSFS_AEL | SPIBAR_HSFS_FCERR | - SPIBAR_HSFS_FDONE; - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - printk(BIOS_ERR, "SPI ERROR: transaction in progress\n"); - return -1; - } - - /* Set flash address */ - RCBA32(SPIBAR_FADDR) = offset; - - /* Setup read transaction */ - RCBA16(SPIBAR_HSFC) = SPIBAR_HSFC_BYTE_COUNT(size) | - SPIBAR_HSFC_CYCLE_READ; - - /* Start transactinon */ - RCBA16(SPIBAR_HSFC) |= SPIBAR_HSFC_GO; - - /* Wait for completion */ - for (i = 0; i < SPI_RETRY; i++) { - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_SCIP) { - /* Cycle in progress, wait 1ms */ - udelay(SPI_DELAY); - continue; - } - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_AEL) { - printk(BIOS_ERR, "SPI ERROR: Access Error\n"); - return -1; - - } - - if (RCBA16(SPIBAR_HSFS) & SPIBAR_HSFS_FCERR) { - printk(BIOS_ERR, "SPI ERROR: Flash Cycle Error\n"); - return -1; - } - break; - } - - if (i >= SPI_RETRY) { - printk(BIOS_ERR, "SPI ERROR: Timeout\n"); - return -1; - } - - /* Read the data */ - for (i = 0; i < size; i+=sizeof(u32)) { - if (size-i >= 4) { - /* reading >= dword */ - *ptr32++ = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); - } else { - /* reading < dword */ - u8 j, *ptr8 = (u8*)ptr32; - u32 temp = RCBA32(SPIBAR_FDATA(i/sizeof(u32))); - for (j = 0; j < (size-i); j++) { - *ptr8++ = temp & 0xff; - temp >>= 8; - } - } - } - - return size; -} - -int early_spi_read(u32 offset, u32 size, u8 *buffer) -{ - u32 current = 0; - - while (size > 0) { - u8 count = (size < 64) ? size : 64; - if (early_spi_read_block(offset + current, count, - buffer + current) < 0) - return -1; - size -= count; - current += count; - } - - return 0; -} diff --git a/src/southbridge/intel/fsp_bd82x6x/early_usb.c b/src/southbridge/intel/fsp_bd82x6x/early_usb.c deleted file mode 100644 index 0533ae7477..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/early_usb.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include "pch.h" - -#define PCH_EHCI1_TEMP_BAR0 0xe8000000 -#define PCH_EHCI2_TEMP_BAR0 0xe8000400 - -/* - * Setup USB controller MMIO BAR to prevent the - * reference code from resetting the controller. - * - * The BAR will be re-assigned during device - * enumeration so these are only temporary. - */ -void enable_usb_bar(void) -{ - device_t usb0 = PCH_EHCI1_DEV; - device_t usb1 = PCH_EHCI2_DEV; - u32 cmd; - - /* USB Controller 1 */ - pci_write_config32(usb0, PCI_BASE_ADDRESS_0, - PCH_EHCI1_TEMP_BAR0); - cmd = pci_read_config32(usb0, PCI_COMMAND); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(usb0, PCI_COMMAND, cmd); - - /* USB Controller 2 */ - pci_write_config32(usb1, PCI_BASE_ADDRESS_0, - PCH_EHCI2_TEMP_BAR0); - cmd = pci_read_config32(usb1, PCI_COMMAND); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(usb1, PCI_COMMAND, cmd); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/elog.c b/src/southbridge/intel/fsp_bd82x6x/elog.c deleted file mode 100644 index c93d3ec6c1..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/elog.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The ChromiumOS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" - -void pch_log_state(void) -{ - u16 pm1_sts, gen_pmcon_3, tco2_sts; - u32 gpe0_sts, gpe0_en; - u8 gen_pmcon_2; - int i; - struct device *lpc = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); - if (!lpc) - return; - - pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); - gpe0_sts = inl(DEFAULT_PMBASE + GPE0_STS); - gpe0_en = inl(DEFAULT_PMBASE + GPE0_EN); - tco2_sts = inw(DEFAULT_PMBASE + TCO2_STS); - gen_pmcon_2 = pci_read_config8(lpc, GEN_PMCON_2); - gen_pmcon_3 = pci_read_config16(lpc, GEN_PMCON_3); - - /* PWR_FLR Power Failure */ - if (gen_pmcon_2 & (1 << 0)) - elog_add_event(ELOG_TYPE_POWER_FAIL); - - /* SUS Well Power Failure */ - if (gen_pmcon_3 & (1 << 14)) - elog_add_event(ELOG_TYPE_SUS_POWER_FAIL); - - /* SYS_PWROK Failure */ - if (gen_pmcon_2 & (1 << 1)) - elog_add_event(ELOG_TYPE_SYS_PWROK_FAIL); - - /* PWROK Failure */ - if (gen_pmcon_2 & (1 << 0)) - elog_add_event(ELOG_TYPE_PWROK_FAIL); - - /* Second TCO Timeout */ - if (tco2_sts & (1 << 1)) - elog_add_event(ELOG_TYPE_TCO_RESET); - - /* Power Button Override */ - if (pm1_sts & (1 << 11)) - elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE); - - /* System Reset Status (reset button pushed) */ - if (gen_pmcon_2 & (1 << 4)) - elog_add_event(ELOG_TYPE_RESET_BUTTON); - - /* General Reset Status */ - if (gen_pmcon_3 & (1 << 9)) - elog_add_event(ELOG_TYPE_SYSTEM_RESET); - - /* ACPI Wake */ - if (pm1_sts & (1 << 15)) - elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, - acpi_is_wakeup_s3() ? 3 : 5); - - /* - * Wake sources - */ - - /* RTC */ - if (pm1_sts & (1 << 10)) - elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0); - - /* PCI Express (TODO: determine wake device) */ - if (pm1_sts & (1 << 14)) - elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0); - - /* PME (TODO: determine wake device) */ - if (gpe0_sts & (1 << 13)) - elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0); - - /* Internal PME (TODO: determine wake device) */ - if (gpe0_sts & (1 << 13)) - elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0); - - /* GPIO 0-15 */ - for (i = 0; i < 16; i++) { - if ((gpe0_sts & (1 << (16+i))) && (gpe0_en & (1 << (16+i)))) - elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i); - } - - /* SMBUS Wake */ - if (gpe0_sts & (1 << 7)) - elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/finalize.c b/src/southbridge/intel/fsp_bd82x6x/finalize.c deleted file mode 100644 index 99fa4c23ac..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/finalize.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include "pch.h" -#include - -void intel_pch_finalize_smm(void) -{ - /* Set SPI opcode menu */ - RCBA16(0x3894) = SPI_OPPREFIX; - RCBA16(0x3896) = SPI_OPTYPE; - RCBA32(0x3898) = SPI_OPMENU_LOWER; - RCBA32(0x389c) = SPI_OPMENU_UPPER; - - /* Lock SPIBAR */ - RCBA32_OR(0x3804, (1 << 15)); - -#if CONFIG_SPI_FLASH_SMM - /* Re-init SPI driver to handle locked BAR */ - spi_init(); -#endif - - /* TCLOCKDN: TC Lockdown */ - RCBA32_OR(0x0050, (1 << 31)); - - /* BIOS Interface Lockdown */ - RCBA32_OR(0x3410, (1 << 0)); - - /* Function Disable SUS Well Lockdown */ - RCBA_AND_OR(8, 0x3420, ~0U, (1 << 7)); - - /* Global SMI Lock */ - pcie_or_config16(PCH_LPC_DEV, 0xa0, 1 << 4); - - /* GEN_PMCON Lock */ - pcie_or_config8(PCH_LPC_DEV, 0xa6, (1 << 1) | (1 << 2)); - - /* R/WO registers */ - RCBA32(0x21a4) = RCBA32(0x21a4); - pcie_write_config32(PCI_DEV(0, 27, 0), 0x74, - pcie_read_config32(PCI_DEV(0, 27, 0), 0x74)); - - /* Indicate finalize step with post code */ - outb(POST_OS_BOOT, 0x80); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/gpio.c b/src/southbridge/intel/fsp_bd82x6x/gpio.c deleted file mode 100644 index f725282ea8..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/gpio.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include - -#include "pch.h" -#include "gpio.h" - -#define MAX_GPIO_NUMBER 75 /* zero based */ -static const int gpio_reg_offsets[] = {GP_LVL, GP_LVL2, GP_LVL3}; - -void setup_pch_gpios(const struct pch_gpio_map *gpio) -{ - u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - - /* GPIO Set 1 */ - if (gpio->set1.level) - outl(*((u32*)gpio->set1.level), gpiobase + GP_LVL); - if (gpio->set1.mode) - outl(*((u32*)gpio->set1.mode), gpiobase + GPIO_USE_SEL); - if (gpio->set1.direction) - outl(*((u32*)gpio->set1.direction), gpiobase + GP_IO_SEL); - if (gpio->set1.reset) - outl(*((u32*)gpio->set1.reset), gpiobase + GP_RST_SEL1); - if (gpio->set1.invert) - outl(*((u32*)gpio->set1.invert), gpiobase + GPI_INV); - if (gpio->set1.blink) - outl(*((u32*)gpio->set1.blink), gpiobase + GPO_BLINK); - - /* GPIO Set 2 */ - if (gpio->set2.level) - outl(*((u32*)gpio->set2.level), gpiobase + GP_LVL2); - if (gpio->set2.mode) - outl(*((u32*)gpio->set2.mode), gpiobase + GPIO_USE_SEL2); - if (gpio->set2.direction) - outl(*((u32*)gpio->set2.direction), gpiobase + GP_IO_SEL2); - if (gpio->set2.reset) - outl(*((u32*)gpio->set2.reset), gpiobase + GP_RST_SEL2); - - /* GPIO Set 3 */ - if (gpio->set3.level) - outl(*((u32*)gpio->set3.level), gpiobase + GP_LVL3); - if (gpio->set3.mode) - outl(*((u32*)gpio->set3.mode), gpiobase + GPIO_USE_SEL3); - if (gpio->set3.direction) - outl(*((u32*)gpio->set3.direction), gpiobase + GP_IO_SEL3); - if (gpio->set3.reset) - outl(*((u32*)gpio->set3.reset), gpiobase + GP_RST_SEL3); -} - -int get_gpio(int gpio_num) -{ - u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - int index, bit; - - if (gpio_num > MAX_GPIO_NUMBER) - return 0; /* Just ignore wrong gpio numbers. */ - - index = gpio_num / 32; - bit = gpio_num % 32; - - return (inl(gpio_base + gpio_reg_offsets[index]) >> bit) & 1; -} - -void set_gpio(int gpio_num) -{ - u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - u32 index, bit, level; - - if (gpio_num <= MAX_GPIO_NUMBER){ - - index = gpio_num / 32; - bit = gpio_num % 32; - level = inl(gpio_base + gpio_reg_offsets[index]); - - outl((gpio_base + gpio_reg_offsets[index]), level | (1UL << bit)); - - } - - return; -} -void clear_gpio(int gpio_num) -{ - u16 gpio_base = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc; - u32 index, bit, level; - - if (gpio_num <= MAX_GPIO_NUMBER){ - index = gpio_num / 32; - bit = gpio_num % 32; - level = inl(gpio_base + gpio_reg_offsets[index]); - - outl((gpio_base + gpio_reg_offsets[index]), level & (~(1UL << bit))); - } - - return; -} - - -/* - * get a number comprised of multiple GPIO values. gpio_num_array points to - * the array of gpio pin numbers to scan, terminated by -1. - */ -unsigned get_gpios(const int *gpio_num_array) -{ - int gpio; - unsigned bitmask = 1; - unsigned vector = 0; - - while (bitmask && - ((gpio = *gpio_num_array++) != -1)) { - if (get_gpio(gpio)) - vector |= bitmask; - bitmask <<= 1; - } - return vector; -} diff --git a/src/southbridge/intel/fsp_bd82x6x/gpio.h b/src/southbridge/intel/fsp_bd82x6x/gpio.h deleted file mode 100644 index c6f49d6ae9..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/gpio.h +++ /dev/null @@ -1,194 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef INTEL_BD82X6X_GPIO_H -#define INTEL_BD82X6X_GPIO_H - -#define GPIO_MODE_NATIVE 0 -#define GPIO_MODE_GPIO 1 -#define GPIO_MODE_NONE 1 - -#define GPIO_DIR_OUTPUT 0 -#define GPIO_DIR_INPUT 1 - -#define GPIO_NO_INVERT 0 -#define GPIO_INVERT 1 - -#define GPIO_LEVEL_LOW 0 -#define GPIO_LEVEL_HIGH 1 - -#define GPIO_NO_BLINK 0 -#define GPIO_BLINK 1 - -#define GPIO_RESET_PWROK 0 -#define GPIO_RESET_RSMRST 1 - -struct pch_gpio_set1 { - u32 gpio0 : 1; - u32 gpio1 : 1; - u32 gpio2 : 1; - u32 gpio3 : 1; - u32 gpio4 : 1; - u32 gpio5 : 1; - u32 gpio6 : 1; - u32 gpio7 : 1; - u32 gpio8 : 1; - u32 gpio9 : 1; - u32 gpio10 : 1; - u32 gpio11 : 1; - u32 gpio12 : 1; - u32 gpio13 : 1; - u32 gpio14 : 1; - u32 gpio15 : 1; - u32 gpio16 : 1; - u32 gpio17 : 1; - u32 gpio18 : 1; - u32 gpio19 : 1; - u32 gpio20 : 1; - u32 gpio21 : 1; - u32 gpio22 : 1; - u32 gpio23 : 1; - u32 gpio24 : 1; - u32 gpio25 : 1; - u32 gpio26 : 1; - u32 gpio27 : 1; - u32 gpio28 : 1; - u32 gpio29 : 1; - u32 gpio30 : 1; - u32 gpio31 : 1; -} __attribute__ ((packed)); - -struct pch_gpio_set2 { - u32 gpio32 : 1; - u32 gpio33 : 1; - u32 gpio34 : 1; - u32 gpio35 : 1; - u32 gpio36 : 1; - u32 gpio37 : 1; - u32 gpio38 : 1; - u32 gpio39 : 1; - u32 gpio40 : 1; - u32 gpio41 : 1; - u32 gpio42 : 1; - u32 gpio43 : 1; - u32 gpio44 : 1; - u32 gpio45 : 1; - u32 gpio46 : 1; - u32 gpio47 : 1; - u32 gpio48 : 1; - u32 gpio49 : 1; - u32 gpio50 : 1; - u32 gpio51 : 1; - u32 gpio52 : 1; - u32 gpio53 : 1; - u32 gpio54 : 1; - u32 gpio55 : 1; - u32 gpio56 : 1; - u32 gpio57 : 1; - u32 gpio58 : 1; - u32 gpio59 : 1; - u32 gpio60 : 1; - u32 gpio61 : 1; - u32 gpio62 : 1; - u32 gpio63 : 1; -} __attribute__ ((packed)); - -struct pch_gpio_set3 { - u32 gpio64 : 1; - u32 gpio65 : 1; - u32 gpio66 : 1; - u32 gpio67 : 1; - u32 gpio68 : 1; - u32 gpio69 : 1; - u32 gpio70 : 1; - u32 gpio71 : 1; - u32 gpio72 : 1; - u32 gpio73 : 1; - u32 gpio74 : 1; - u32 gpio75 : 1; - u32 fill_bitfield : 20; -} __attribute__ ((packed)); - -struct pch_gpio_map { - union { - struct { - const struct pch_gpio_set1 *mode; - const struct pch_gpio_set1 *direction; - const struct pch_gpio_set1 *level; - const struct pch_gpio_set1 *reset; - const struct pch_gpio_set1 *invert; - const struct pch_gpio_set1 *blink; - } set1; - struct { - const u32 *mode; - const u32 *direction; - const u32 *level; - const u32 *reset; - const u32 *invert; - const u32 *blink; - } set1_vals; - }; - - union { - struct { - const struct pch_gpio_set2 *mode; - const struct pch_gpio_set2 *direction; - const struct pch_gpio_set2 *level; - const struct pch_gpio_set2 *reset; - } set2; - struct { - const u32 *mode; - const u32 *direction; - const u32 *level; - const u32 *reset; - } set2_vals; - }; - - union { - struct { - const struct pch_gpio_set3 *mode; - const struct pch_gpio_set3 *direction; - const struct pch_gpio_set3 *level; - const struct pch_gpio_set3 *reset; - } set3; - struct { - const u32 *mode; - const u32 *direction; - const u32 *level; - const u32 *reset; - } set3_vals; - }; -}; - -/* Configure GPIOs with mainboard provided settings */ -void setup_pch_gpios(const struct pch_gpio_map *gpio); - -/* get GPIO and set pin values */ -int get_gpio(int gpio_num); -void set_gpio(int gpio_num); -void clear_gpio(int gpio_num); - -/* - * get a number comprised of multiple GPIO values. gpio_num_array points to - * the array of gpio pin numbers to scan, terminated by -1. - */ -unsigned get_gpios(const int *gpio_num_array); - -#endif diff --git a/src/southbridge/intel/fsp_bd82x6x/lpc.c b/src/southbridge/intel/fsp_bd82x6x/lpc.c deleted file mode 100644 index 3f4343d183..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/lpc.c +++ /dev/null @@ -1,784 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" -#include "nvs.h" - -#define NMI_OFF 0 - -#define ENABLE_ACPI_MODE_IN_COREBOOT 0 - -typedef struct southbridge_intel_fsp_bd82x6x_config config_t; - -static void pch_enable_apic(struct device *dev) -{ - int i; - u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); - - /* Enable ACPI I/O and power management. - * Set SCI IRQ to IRQ9 - */ - pci_write_config8(dev, ACPI_CNTL, 0x80); - - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - /* affirm full set of redirection table entries ("write once") */ - *ioapic_index = 1; - reg32 = *ioapic_data; - *ioapic_index = 1; - *ioapic_data = reg32; - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); - for (i=0; i<3; i++) { - *ioapic_index = i; - printk(BIOS_SPEW, " reg 0x%04x:", i); - reg32 = *ioapic_data; - printk(BIOS_SPEW, " 0x%08x\n", reg32); - } - - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ -} - -static void pch_enable_serial_irqs(struct device *dev) -{ - /* Set packet length and toggle silent mode bit for one frame. */ - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); -#if !CONFIG_SERIRQ_CONTINUOUS_MODE - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); -#endif -} - -/* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control - * 0x00 - 0000 = Reserved - * 0x01 - 0001 = Reserved - * 0x02 - 0010 = Reserved - * 0x03 - 0011 = IRQ3 - * 0x04 - 0100 = IRQ4 - * 0x05 - 0101 = IRQ5 - * 0x06 - 0110 = IRQ6 - * 0x07 - 0111 = IRQ7 - * 0x08 - 1000 = Reserved - * 0x09 - 1001 = IRQ9 - * 0x0A - 1010 = IRQ10 - * 0x0B - 1011 = IRQ11 - * 0x0C - 1100 = IRQ12 - * 0x0D - 1101 = Reserved - * 0x0E - 1110 = IRQ14 - * 0x0F - 1111 = IRQ15 - * PIRQ[n]_ROUT[7] - PIRQ Routing Control - * 0x80 - The PIRQ is not routed. - */ - -static void pch_pirq_init(device_t dev) -{ - device_t irq_dev; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); - - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); - - /* Eric Biederman once said we should let the OS do this. - * I am not so sure anymore he was right. - */ - - for(irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { - u8 int_pin=0, int_line=0; - - if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) - continue; - - int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); - - switch (int_pin) { - case 1: /* INTA# */ int_line = config->pirqa_routing; break; - case 2: /* INTB# */ int_line = config->pirqb_routing; break; - case 3: /* INTC# */ int_line = config->pirqc_routing; break; - case 4: /* INTD# */ int_line = config->pirqd_routing; break; - } - - if (!int_line) - continue; - - pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); - } -} - -static void pch_gpi_routing(device_t dev) -{ - /* Get the chip configuration */ - config_t *config = dev->chip_info; - u32 reg32 = 0; - - /* An array would be much nicer here, or some - * other method of doing this. - */ - reg32 |= (config->gpi0_routing & 0x03) << 0; - reg32 |= (config->gpi1_routing & 0x03) << 2; - reg32 |= (config->gpi2_routing & 0x03) << 4; - reg32 |= (config->gpi3_routing & 0x03) << 6; - reg32 |= (config->gpi4_routing & 0x03) << 8; - reg32 |= (config->gpi5_routing & 0x03) << 10; - reg32 |= (config->gpi6_routing & 0x03) << 12; - reg32 |= (config->gpi7_routing & 0x03) << 14; - reg32 |= (config->gpi8_routing & 0x03) << 16; - reg32 |= (config->gpi9_routing & 0x03) << 18; - reg32 |= (config->gpi10_routing & 0x03) << 20; - reg32 |= (config->gpi11_routing & 0x03) << 22; - reg32 |= (config->gpi12_routing & 0x03) << 24; - reg32 |= (config->gpi13_routing & 0x03) << 26; - reg32 |= (config->gpi14_routing & 0x03) << 28; - reg32 |= (config->gpi15_routing & 0x03) << 30; - - pci_write_config32(dev, GPIO_ROUT, reg32); -} - -static void pch_power_options(device_t dev) -{ - u8 reg8; - u16 reg16, pmbase; - u32 reg32; - const char *state; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - int nmi_option; - - /* Which state do we want to goto after g3 (power restored)? - * 0 == S0 Full On - * 1 == S5 Soft Off - * - * If the option is not existent (Laptops), use Kconfig setting. - */ - get_option(&pwr_on, "power_on_after_fail"); - - reg16 = pci_read_config16(dev, GEN_PMCON_3); - reg16 &= 0xfffe; - switch (pwr_on) { - case MAINBOARD_POWER_OFF: - reg16 |= 1; - state = "off"; - break; - case MAINBOARD_POWER_ON: - reg16 &= ~1; - state = "on"; - break; - case MAINBOARD_POWER_KEEP: - reg16 &= ~1; - state = "state keep"; - break; - default: - state = "undefined"; - } - - reg16 &= ~(3 << 4); /* SLP_S4# Assertion Stretch 4s */ - reg16 |= (1 << 3); /* SLP_S4# Assertion Stretch Enable */ - - reg16 &= ~(1 << 10); - reg16 |= (1 << 11); /* SLP_S3# Min Assertion Width 50ms */ - - reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ - - pci_write_config16(dev, GEN_PMCON_3, reg16); - printk(BIOS_INFO, "Set power %s after power failure.\n", state); - - /* Set up NMI on errors. */ - reg8 = inb(0x61); - reg8 &= 0x0f; /* Higher Nibble must be 0 */ - reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ - // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ - reg8 |= (1 << 2); /* PCI SERR# Disable for now */ - outb(reg8, 0x61); - - reg8 = inb(0x70); - nmi_option = NMI_OFF; - get_option(&nmi_option, "nmi"); - if (nmi_option) { - printk(BIOS_INFO, "NMI sources enabled.\n"); - reg8 &= ~(1 << 7); /* Set NMI. */ - } else { - printk(BIOS_INFO, "NMI sources disabled.\n"); - reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ - } - outb(reg8, 0x70); - - /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 &= ~(3 << 0); // SMI# rate 1 minute - reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME -#if DEBUG_PERIODIC_SMIS - /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using - * periodic SMIs. - */ - reg16 |= (3 << 0); // Periodic SMI every 8s -#endif - pci_write_config16(dev, GEN_PMCON_1, reg16); - - // Set the board's GPI routing. - pch_gpi_routing(dev); - - pmbase = pci_read_config16(dev, 0x40) & 0xfffe; - - outl(config->gpe0_en, pmbase + GPE0_EN); - outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN); - - /* Set up power management block and determine sleep mode */ - reg32 = inl(pmbase + 0x04); // PM1_CNT - reg32 &= ~(7 << 10); // SLP_TYP - reg32 |= (1 << 0); // SCI_EN - outl(reg32, pmbase + 0x04); - - /* Clear magic status bits to prevent unexpected wake */ - reg32 = RCBA32(0x3310); - reg32 |= (1 << 4)|(1 << 5)|(1 << 0); - RCBA32(0x3310) = reg32; -} - -static void pch_rtc_init(struct device *dev) -{ - u8 reg8; - int rtc_failed; - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - rtc_failed = reg8 & RTC_BATTERY_DEAD; - if (rtc_failed) { - reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(dev, GEN_PMCON_3, reg8); -#if CONFIG_ELOG - elog_add_event(ELOG_TYPE_RTC_RESET); -#endif - } - printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); - - cmos_init(rtc_failed); -} - -/* CougarPoint PCH Power Management init */ -static void cpt_pm_init(struct device *dev) -{ - printk(BIOS_DEBUG, "CougarPoint PM init\n"); - pci_write_config8(dev, 0xa9, 0x47); - RCBA32_AND_OR(0x2238, ~0UL, (1 << 6)|(1 << 0)); - RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); - RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); - RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); - RCBA32(0x2304) = 0xc0388400; - RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); - RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); - RCBA32_AND_OR(0x3314, ~0x1f, 0xf); - RCBA32(0x3318) = 0x050f0000; - RCBA32(0x3324) = 0x04000000; - RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); - RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)); - RCBA32(0x3360) = 0x0001c000; - RCBA32(0x3368) = 0x00061100; - RCBA32(0x3378) = 0x7f8fdfff; - RCBA32(0x337c) = 0x000003fc; - RCBA32(0x3388) = 0x00001000; - RCBA32(0x3390) = 0x0001c000; - RCBA32(0x33a0) = 0x00000800; - RCBA32(0x33b0) = 0x00001000; - RCBA32(0x33c0) = 0x00093900; - RCBA32(0x33cc) = 0x24653002; - RCBA32(0x33d0) = 0x062108fe; - RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); - RCBA32(0x3a28) = 0x01010000; - RCBA32(0x3a2c) = 0x01010404; - RCBA32(0x3a80) = 0x01041041; - RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); - RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ - RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ - RCBA32(0x3a6c) = 0x00000001; - RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); - RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); - RCBA32(0x33c8) = 0; - RCBA32_AND_OR(0x21b0, ~0UL, 0xf); -} - -/* PantherPoint PCH Power Management init */ -static void ppt_pm_init(struct device *dev) -{ - printk(BIOS_DEBUG, "PantherPoint PM init\n"); - pci_write_config8(dev, 0xa9, 0x47); - RCBA32_AND_OR(0x2238, ~0UL, (1 << 0)); - RCBA32_AND_OR(0x228c, ~0UL, (1 << 0)); - RCBA16_AND_OR(0x1100, ~0UL, (1 << 13)|(1 << 14)); - RCBA16_AND_OR(0x0900, ~0UL, (1 << 14)); - RCBA32(0x2304) = 0xc03b8400; - RCBA32_AND_OR(0x2314, ~0UL, (1 << 5)|(1 << 18)); - RCBA32_AND_OR(0x2320, ~0UL, (1 << 15)|(1 << 1)); - RCBA32_AND_OR(0x3314, ~0x1f, 0xf); - RCBA32(0x3318) = 0x054f0000; - RCBA32(0x3324) = 0x04000000; - RCBA32_AND_OR(0x3340, ~0UL, 0xfffff); - RCBA32_AND_OR(0x3344, ~0UL, (1 << 1)|(1 << 0)); - RCBA32(0x3360) = 0x0001c000; - RCBA32(0x3368) = 0x00061100; - RCBA32(0x3378) = 0x7f8fdfff; - RCBA32(0x337c) = 0x000003fd; - RCBA32(0x3388) = 0x00001000; - RCBA32(0x3390) = 0x0001c000; - RCBA32(0x33a0) = 0x00000800; - RCBA32(0x33b0) = 0x00001000; - RCBA32(0x33c0) = 0x00093900; - RCBA32(0x33cc) = 0x24653002; - RCBA32(0x33d0) = 0x067388fe; - RCBA32_AND_OR(0x33d4, 0xf000f000, 0x00670060); - RCBA32(0x3a28) = 0x01010000; - RCBA32(0x3a2c) = 0x01010404; - RCBA32(0x3a80) = 0x01040000; - RCBA32_AND_OR(0x3a84, ~0x0000ffff, 0x00001001); - RCBA32_AND_OR(0x3a84, ~0UL, (1 << 24)); /* SATA 2/3 disabled */ - RCBA32_AND_OR(0x3a88, ~0UL, (1 << 0)); /* SATA 4/5 disabled */ - RCBA32(0x3a6c) = 0x00000001; - RCBA32_AND_OR(0x2344, 0x00ffff00, 0xff00000c); - RCBA32_AND_OR(0x80c, ~(0xff << 20), 0x11 << 20); - RCBA32_AND_OR(0x33a4, ~0UL, (1 << 0)); - RCBA32(0x33c8) = 0; - RCBA32_AND_OR(0x21b0, ~0UL, 0xf); -} - -static void enable_hpet(void) -{ - u32 reg32; - - /* Move HPET to default address 0xfed00000 and enable it */ - reg32 = RCBA32(HPTC); - reg32 |= (1 << 7); // HPET Address Enable - reg32 &= ~(3 << 0); - RCBA32(HPTC) = reg32; -} - -static void pch_set_acpi_mode(void) -{ - if (!acpi_is_wakeup_s3() && CONFIG_HAVE_SMI_HANDLER) { -#if ENABLE_ACPI_MODE_IN_COREBOOT - printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); - outb(APM_CNT_ACPI_ENABLE, APM_CNT); // Enable ACPI mode - printk(BIOS_DEBUG, "done.\n"); -#else - printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); - outb(APM_CNT_ACPI_DISABLE, APM_CNT); // Disable ACPI mode - printk(BIOS_DEBUG, "done.\n"); -#endif - } -} - -static void pch_disable_smm_only_flashing(struct device *dev) -{ - u8 reg8; - - printk(BIOS_SPEW, "Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - reg8 &= ~(1 << 5); - pci_write_config8(dev, 0xdc, reg8); -} - -static void pch_fixups(struct device *dev) -{ - u8 gen_pmcon_2; - - /* Indicate DRAM init done for MRC S3 to know it can resume */ - gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); - gen_pmcon_2 |= (1 << 7); - pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); - -} - -static void pch_decode_init(struct device *dev) -{ - config_t *config = dev->chip_info; - - printk(BIOS_DEBUG, "pch_decode_init\n"); - - pci_write_config32(dev, LPC_GEN1_DEC, config->gen1_dec); - pci_write_config32(dev, LPC_GEN2_DEC, config->gen2_dec); - pci_write_config32(dev, LPC_GEN3_DEC, config->gen3_dec); - pci_write_config32(dev, LPC_GEN4_DEC, config->gen4_dec); -} - -static void lpc_init(struct device *dev) -{ - printk(BIOS_DEBUG, "pch: lpc_init\n"); - - /* Set the value for PCI command register. */ - pci_write_config16(dev, PCI_COMMAND, 0x000f); - - /* IO APIC initialization. */ - pch_enable_apic(dev); - - pch_enable_serial_irqs(dev); - - /* Setup the PIRQ. */ - pch_pirq_init(dev); - - /* Setup power options. */ - pch_power_options(dev); - - /* Initialize power management */ - switch (pch_silicon_type()) { - case PCH_TYPE_CPT: /* CougarPoint */ - cpt_pm_init(dev); - break; - case PCH_TYPE_PPT: /* PantherPoint */ - ppt_pm_init(dev); - break; - default: - printk(BIOS_ERR, "Unknown Chipset: 0x%04x\n", dev->device); - } - - /* Set the state of the GPIO lines. */ - //gpio_init(dev); - - /* Initialize the real time clock. */ - pch_rtc_init(dev); - - /* Initialize ISA DMA. */ - isa_dma_init(); - - /* Initialize the High Precision Event Timers, if present. */ - enable_hpet(); - - setup_i8259(); - - /* The OS should do this? */ - /* Interrupt 9 should be level triggered (SCI) */ - i8259_configure_irq_trigger(9, 1); - - pch_disable_smm_only_flashing(dev); - - pch_set_acpi_mode(); - - pch_fixups(dev); -} - -static void pch_lpc_read_resources(device_t dev) -{ - struct resource *res; - config_t *config = dev->chip_info; - u8 io_index = 0; - - /* Get the normal PCI resources of this device. */ - pci_dev_read_resources(dev); - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - /* Set PCH IO decode ranges if required.*/ - if ((config->gen1_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen1_dec & 0xFFFC; - res->size = (config->gen1_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen2_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen2_dec & 0xFFFC; - res->size = (config->gen2_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen3_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen3_dec & 0xFFFC; - res->size = (config->gen3_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } - - if ((config->gen4_dec & 0xFFFC) > 0x1000) { - res = new_resource(dev, IOINDEX_SUBTRACTIVE(io_index++, 0)); - res->base = config->gen4_dec & 0xFFFC; - res->size = (config->gen4_dec >> 16) & 0xFC; - res->flags = IORESOURCE_IO| IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - } -} - -static void pch_lpc_enable_resources(device_t dev) -{ - pch_decode_init(dev); - return pci_dev_enable_resources(dev); -} - -static void pch_lpc_enable(device_t dev) -{ - pch_enable(dev); -} - -static void set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static void southbridge_inject_dsdt(device_t dev) -{ - global_nvs_t *gnvs = cbmem_add (CBMEM_ID_ACPI_GNVS, sizeof (*gnvs)); - void *opregion; - - /* Calling northbridge code as gnvs contains opregion address. */ - opregion = igd_make_opregion(); - - if (gnvs) { - const struct i915_gpu_controller_info *gfx = intel_gma_get_controller_info(); - - memset(gnvs, 0, sizeof (*gnvs)); - - acpi_create_gnvs(gnvs); - /* IGD OpRegion Base Address */ - gnvs->aslb = (u32)opregion; - - gnvs->ndid = gfx->ndid; - memcpy(gnvs->did, gfx->did, sizeof(gnvs->did)); - - /* And tell SMI about it */ - smm_setup_structures(gnvs, NULL, NULL); - - /* Add it to DSDT. */ - acpigen_write_scope("\\"); - acpigen_write_name_dword("NVSA", (u32) gnvs); - acpigen_pop_len(); - } -} - -void acpi_fill_fadt(acpi_fadt_t *fadt) -{ - device_t dev = dev_find_slot(0, PCI_DEVFN(0x1f,0)); - config_t *chip = dev->chip_info; - u16 pmbase = pci_read_config16(dev, 0x40) & 0xfffe; - int c2_latency; - - fadt->model = 1; - - fadt->sci_int = 0x9; - fadt->smi_cmd = APM_CNT; - fadt->acpi_enable = APM_CNT_ACPI_ENABLE; - fadt->acpi_disable = APM_CNT_ACPI_DISABLE; - fadt->s4bios_req = 0x0; - fadt->pstate_cnt = 0; - - fadt->pm1a_evt_blk = pmbase; - fadt->pm1b_evt_blk = 0x0; - fadt->pm1a_cnt_blk = pmbase + 0x4; - fadt->pm1b_cnt_blk = 0x0; - fadt->pm2_cnt_blk = pmbase + 0x50; - fadt->pm_tmr_blk = pmbase + 0x8; - fadt->gpe0_blk = pmbase + 0x20; - fadt->gpe1_blk = 0; - - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm2_cnt_len = 1; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = 16; - fadt->gpe1_blk_len = 0; - fadt->gpe1_base = 0; - fadt->cst_cnt = 0; - c2_latency = chip->c2_latency; - if (!c2_latency) { - c2_latency = 101; /* c2 unsupported */ - } - fadt->p_lvl2_lat = c2_latency; - fadt->p_lvl3_lat = 87; - fadt->flush_size = 1024; - fadt->flush_stride = 16; - fadt->duty_offset = 1; - if (chip->p_cnt_throttling_supported) { - fadt->duty_width = 3; - } else { - fadt->duty_width = 0; - } - fadt->day_alrm = 0xd; - fadt->mon_alrm = 0x00; - fadt->century = 0x00; - fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; - - fadt->flags = ACPI_FADT_WBINVD | - ACPI_FADT_C1_SUPPORTED | - ACPI_FADT_SLEEP_BUTTON | - ACPI_FADT_RESET_REGISTER | - ACPI_FADT_SEALED_CASE | - ACPI_FADT_S4_RTC_WAKE | - ACPI_FADT_PLATFORM_CLOCK; - if (c2_latency < 100) { - fadt->flags |= ACPI_FADT_C2_MP_SUPPORTED; - } - - fadt->reset_reg.space_id = 1; - fadt->reset_reg.bit_width = 8; - fadt->reset_reg.bit_offset = 0; - fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->reset_reg.addrl = 0xcf9; - fadt->reset_reg.addrh = 0; - - fadt->reset_value = 6; - - fadt->x_pm1a_evt_blk.space_id = 1; - fadt->x_pm1a_evt_blk.bit_width = 32; - fadt->x_pm1a_evt_blk.bit_offset = 0; - fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm1a_evt_blk.addrl = pmbase; - fadt->x_pm1a_evt_blk.addrh = 0x0; - - fadt->x_pm1b_evt_blk.space_id = 1; - fadt->x_pm1b_evt_blk.bit_width = 0; - fadt->x_pm1b_evt_blk.bit_offset = 0; - fadt->x_pm1b_evt_blk.access_size = 0; - fadt->x_pm1b_evt_blk.addrl = 0x0; - fadt->x_pm1b_evt_blk.addrh = 0x0; - - fadt->x_pm1a_cnt_blk.space_id = 1; - fadt->x_pm1a_cnt_blk.bit_width = 16; - fadt->x_pm1a_cnt_blk.bit_offset = 0; - fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; - fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4; - fadt->x_pm1a_cnt_blk.addrh = 0x0; - - fadt->x_pm1b_cnt_blk.space_id = 1; - fadt->x_pm1b_cnt_blk.bit_width = 0; - fadt->x_pm1b_cnt_blk.bit_offset = 0; - fadt->x_pm1b_cnt_blk.access_size = 0; - fadt->x_pm1b_cnt_blk.addrl = 0x0; - fadt->x_pm1b_cnt_blk.addrh = 0x0; - - fadt->x_pm2_cnt_blk.space_id = 1; - fadt->x_pm2_cnt_blk.bit_width = 8; - fadt->x_pm2_cnt_blk.bit_offset = 0; - fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; - fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50; - fadt->x_pm2_cnt_blk.addrh = 0x0; - - fadt->x_pm_tmr_blk.space_id = 1; - fadt->x_pm_tmr_blk.bit_width = 32; - fadt->x_pm_tmr_blk.bit_offset = 0; - fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_pm_tmr_blk.addrl = pmbase + 0x8; - fadt->x_pm_tmr_blk.addrh = 0x0; - - fadt->x_gpe0_blk.space_id = 1; - fadt->x_gpe0_blk.bit_width = 128; - fadt->x_gpe0_blk.bit_offset = 0; - fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; - fadt->x_gpe0_blk.addrl = pmbase + 0x20; - fadt->x_gpe0_blk.addrh = 0x0; - - fadt->x_gpe1_blk.space_id = 1; - fadt->x_gpe1_blk.bit_width = 0; - fadt->x_gpe1_blk.bit_offset = 0; - fadt->x_gpe1_blk.access_size = 0; - fadt->x_gpe1_blk.addrl = 0x0; - fadt->x_gpe1_blk.addrh = 0x0; -} - -static struct pci_operations pci_ops = { - .set_subsystem = set_subsystem, -}; - -static struct device_operations device_ops = { - .read_resources = pch_lpc_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pch_lpc_enable_resources, - .write_acpi_tables = acpi_write_hpet, - .acpi_inject_dsdt_generator = southbridge_inject_dsdt, - .init = lpc_init, - .enable = pch_lpc_enable, - .scan_bus = scan_lpc_bus, - .ops_pci = &pci_ops, -}; - - -/* IDs for LPC device of Intel 6 Series Chipset, Intel 7 Series Chipset, and - * Intel C200 Series Chipset - */ - -static const unsigned short pci_device_ids[] = { 0x1c46, 0x1c47, 0x1c49, 0x1c4a, - 0x1c4b, 0x1c4c, 0x1c4d, 0x1c4e, - 0x1c4f, 0x1c50, 0x1c52, 0x1c54, - 0x1e55, 0x1c56, 0x1e57, 0x1c5c, - 0x1e5d, 0x1e5e, 0x1e5f, 0x2310, - 0 }; - -static const struct pci_driver pch_lpc __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/southbridge/intel/fsp_bd82x6x/me.c b/src/southbridge/intel/fsp_bd82x6x/me.c deleted file mode 100644 index 8f65da3abf..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/me.c +++ /dev/null @@ -1,773 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* - * This is a ramstage driver for the Intel Management Engine found in the - * 6-series chipset. It handles the required boot-time messages over the - * MMIO-based Management Engine Interface to tell the ME that the BIOS is - * finished with POST. Additional messages are defined for debug but are - * not used unless the console loglevel is high enough. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef __SMM__ -# include -# include -#endif - -#include "me.h" -#include "pch.h" - -#if CONFIG_CHROMEOS -#include -#endif - -#ifndef __SMM__ -/* Path that the BIOS should take based on ME state */ -static const char *me_bios_path_values[] = { - [ME_NORMAL_BIOS_PATH] = "Normal", - [ME_S3WAKE_BIOS_PATH] = "S3 Wake", - [ME_ERROR_BIOS_PATH] = "Error", - [ME_RECOVERY_BIOS_PATH] = "Recovery", - [ME_DISABLE_BIOS_PATH] = "Disable", - [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", -}; -#endif - -/* MMIO base address for MEI interface */ -static u32 *mei_base_address; - -#if CONFIG_DEBUG_INTEL_ME -static void mei_dump(void *ptr, int dword, int offset, const char *type) -{ - struct mei_csr *csr; - - printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); - - switch (offset) { - case MEI_H_CSR: - case MEI_ME_CSR_HA: - csr = ptr; - if (!csr) { - printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); - break; - } - printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " - "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, - csr->buffer_read_ptr, csr->buffer_write_ptr, - csr->ready, csr->reset, csr->interrupt_generate, - csr->interrupt_status, csr->interrupt_enable); - break; - case MEI_ME_CB_RW: - case MEI_H_CB_WW: - printk(BIOS_SPEW, "CB: 0x%08x\n", dword); - break; - default: - printk(BIOS_SPEW, "0x%08x\n", offset); - break; - } -} -#else -# define mei_dump(ptr,dword,offset,type) do {} while (0) -#endif - -/* - * ME/MEI access helpers using memcpy to avoid aliasing. - */ - -static inline void mei_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = read32(mei_base_address + (offset/sizeof(u32))); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "READ"); -} - -static inline void mei_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - write32(mei_base_address + (offset/sizeof(u32)), dword); - mei_dump(ptr, dword, offset, "WRITE"); -} - -#ifndef __SMM__ -static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) -{ - u32 dword = pci_read_config32(dev, offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "PCI READ"); -} -#endif - -static inline void read_host_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_H_CSR); -} - -static inline void write_host_csr(struct mei_csr *csr) -{ - mei_write_dword_ptr(csr, MEI_H_CSR); -} - -static inline void read_me_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_ME_CSR_HA); -} - -static inline void write_cb(u32 dword) -{ - write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword); - mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); -} - -static inline u32 read_cb(void) -{ - u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32))); - mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); - return dword; -} - -/* Wait for ME ready bit to be asserted */ -static int mei_wait_for_me_ready(void) -{ - struct mei_csr me; - unsigned try = ME_RETRY; - - while (try--) { - read_me_csr(&me); - if (me.ready) - return 0; - udelay(ME_DELAY); - } - - printk(BIOS_ERR, "ME: failed to become ready\n"); - return -1; -} - -static void mei_reset(void) -{ - struct mei_csr host; - - if (mei_wait_for_me_ready() < 0) - return; - - /* Reset host and ME circular buffers for next message */ - read_host_csr(&host); - host.reset = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - if (mei_wait_for_me_ready() < 0) - return; - - /* Re-init and indicate host is ready */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); -} - -static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data) -{ - struct mei_csr host; - unsigned ndata, n; - u32 *data; - - /* Number of dwords to write, ignoring MKHI */ - ndata = mei->length >> 2; - - /* Pad non-dword aligned request message length */ - if (mei->length & 3) - ndata++; - if (!ndata) { - printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); - return -1; - } - ndata++; /* Add MEI header */ - - /* - * Make sure there is still room left in the circular buffer. - * Reset the buffer pointers if the requested message will not fit. - */ - read_host_csr(&host); - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); - mei_reset(); - read_host_csr(&host); - } - - /* - * This implementation does not handle splitting large messages - * across multiple transactions. Ensure the requested length - * will fit in the available circular buffer depth. - */ - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", - ndata + 2, host.buffer_depth); - return -1; - } - - /* Write MEI header */ - mei_write_dword_ptr(mei, MEI_H_CB_WW); - ndata--; - - /* Write MKHI header */ - mei_write_dword_ptr(mkhi, MEI_H_CB_WW); - ndata--; - - /* Write message data */ - data = req_data; - for (n = 0; n < ndata; ++n) - write_cb(*data++); - - /* Generate interrupt to the ME */ - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - /* Make sure ME is ready after sending request data */ - return mei_wait_for_me_ready(); -} - -static int mei_recv_msg(struct mei_header *mei, struct mkhi_header *mkhi, - void *rsp_data, int rsp_bytes) -{ - struct mei_header mei_rsp; - struct mkhi_header mkhi_rsp; - struct mei_csr me, host; - unsigned ndata, n; - unsigned expected; - u32 *data; - - /* Total number of dwords to read from circular buffer */ - expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; - if (rsp_bytes & 3) - expected++; - - /* - * The interrupt status bit does not appear to indicate that the - * message has actually been received. Instead we wait until the - * expected number of dwords are present in the circular buffer. - */ - for (n = ME_RETRY; n; --n) { - read_me_csr(&me); - if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) - break; - udelay(ME_DELAY); - } - if (!n) { - printk(BIOS_ERR, "ME: timeout waiting for data: expected " - "%u, available %u\n", expected, - me.buffer_write_ptr - me.buffer_read_ptr); - return -1; - } - - /* Read and verify MEI response header from the ME */ - mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); - if (!mei_rsp.is_complete) { - printk(BIOS_ERR, "ME: response is not complete\n"); - return -1; - } - - /* Handle non-dword responses and expect at least MKHI header */ - ndata = mei_rsp.length >> 2; - if (mei_rsp.length & 3) - ndata++; - if (ndata != (expected - 1)) { - printk(BIOS_ERR, "ME: response is missing data\n"); - return -1; - } - - /* Read and verify MKHI response header from the ME */ - mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); - if (!mkhi_rsp.is_response || - mkhi->group_id != mkhi_rsp.group_id || - mkhi->command != mkhi_rsp.command) { - printk(BIOS_ERR, "ME: invalid response, group %u ?= %u, " - "command %u ?= %u, is_response %u\n", mkhi->group_id, - mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, - mkhi_rsp.is_response); - return -1; - } - ndata--; /* MKHI header has been read */ - - /* Make sure caller passed a buffer with enough space */ - if (ndata != (rsp_bytes >> 2)) { - printk(BIOS_ERR, "ME: not enough room in response buffer: " - "%u != %u\n", ndata, rsp_bytes >> 2); - return -1; - } - - /* Read response data from the circular buffer */ - data = rsp_data; - for (n = 0; n < ndata; ++n) - *data++ = read_cb(); - - /* Tell the ME that we have consumed the response */ - read_host_csr(&host); - host.interrupt_status = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - return mei_wait_for_me_ready(); -} - -static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data, void *rsp_data, int rsp_bytes) -{ - if (mei_send_msg(mei, mkhi, req_data) < 0) - return -1; - if (mei_recv_msg(mei, mkhi, rsp_data, rsp_bytes) < 0) - return -1; - return 0; -} - -#ifdef __SMM__ -/* Send END OF POST message to the ME */ -static int mkhi_end_of_post(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_END_OF_POST, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi), - }; - - /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, NULL, NULL, 0) < 0) { - printk(BIOS_ERR, "ME: END OF POST message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: END OF POST message successful\n"); - return 0; -} -#endif - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__) -/* Get ME firmware version */ -static int mkhi_get_fw_version(void) -{ - struct me_fw_version version; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_GET_FW_VERSION, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi), - }; - - /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, NULL, &version, sizeof(version)) < 0) { - printk(BIOS_ERR, "ME: GET FW VERSION message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: Firmware Version %u.%u.%u.%u (code) " - "%u.%u.%u.%u (recovery)\n", - version.code_major, version.code_minor, - version.code_build_number, version.code_hot_fix, - version.recovery_major, version.recovery_minor, - version.recovery_build_number, version.recovery_hot_fix); - - return 0; -} - -static inline void print_cap(const char *name, int state) -{ - printk(BIOS_DEBUG, "ME Capability: %-30s : %sabled\n", - name, state ? "en" : "dis"); -} - -/* Get ME Firmware Capabilities */ -static int mkhi_get_fwcaps(void) -{ - u32 rule_id = 0; - struct me_fwcaps cap; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_FWCAPS, - .command = MKHI_FWCAPS_GET_RULE, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi) + sizeof(rule_id), - }; - - /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap, sizeof(cap)) < 0) { - printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); - return -1; - } - - print_cap("Full Network manageability", cap.caps_sku.full_net); - print_cap("Regular Network manageability", cap.caps_sku.std_net); - print_cap("Manageability", cap.caps_sku.manageability); - print_cap("Small business technology", cap.caps_sku.small_business); - print_cap("Level III manageability", cap.caps_sku.l3manageability); - print_cap("IntelR Anti-Theft (AT)", cap.caps_sku.intel_at); - print_cap("IntelR Capability Licensing Service (CLS)", - cap.caps_sku.intel_cls); - print_cap("IntelR Power Sharing Technology (MPC)", - cap.caps_sku.intel_mpc); - print_cap("ICC Over Clocking", cap.caps_sku.icc_over_clocking); - print_cap("Protected Audio Video Path (PAVP)", cap.caps_sku.pavp); - print_cap("IPV6", cap.caps_sku.ipv6); - print_cap("KVM Remote Control (KVM)", cap.caps_sku.kvm); - print_cap("Outbreak Containment Heuristic (OCH)", cap.caps_sku.och); - print_cap("Virtual LAN (VLAN)", cap.caps_sku.vlan); - print_cap("TLS", cap.caps_sku.tls); - print_cap("Wireless LAN (WLAN)", cap.caps_sku.wlan); - - return 0; -} -#endif - -#if CONFIG_CHROMEOS && 0 /* DISABLED */ -/* Tell ME to issue a global reset */ -int mkhi_global_reset(void) -{ - struct me_global_reset reset = { - .request_origin = GLOBAL_RESET_BIOS_POST, - .reset_type = CBM_RR_GLOBAL_RESET, - }; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_CBM, - .command = MKHI_GLOBAL_RESET, - }; - struct mei_header mei = { - .is_complete = 1, - .length = sizeof(mkhi) + sizeof(reset), - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - }; - - printk(BIOS_NOTICE, "ME: Requesting global reset\n"); - - /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) { - /* No response means reset will happen shortly... */ - halt(); - } - - /* If the ME responded it rejected the reset request */ - printk(BIOS_ERR, "ME: Global Reset failed\n"); - return -1; -} -#endif - -#ifdef __SMM__ -static void intel_me7_finalize_smm(void) -{ - struct me_hfs hfs; - u32 reg32; - - mei_base_address = (u32 *) - (pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf); - - /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0) - return; - - /* Make sure ME is in a mode that expects EOP */ - reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS); - memcpy(&hfs, ®32, sizeof(u32)); - - /* Abort and leave device alone if not normal mode */ - if (hfs.fpt_bad || - hfs.working_state != ME_HFS_CWS_NORMAL || - hfs.operation_mode != ME_HFS_MODE_NORMAL) - return; - - /* Try to send EOP command so ME stops accepting other commands */ - mkhi_end_of_post(); - - /* Make sure IO is disabled */ - reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32); - - /* Hide the PCI device */ - RCBA32_OR(FD2, PCH_DISABLE_MEI1); -} - -void intel_me_finalize_smm(void) -{ - u32 did = pcie_read_config32(PCH_ME_DEV, PCI_VENDOR_ID); - switch (did) { - case 0x1c3a8086: - intel_me7_finalize_smm(); - break; - case 0x1e3a8086: - intel_me8_finalize_smm(); - break; - default: - printk(BIOS_ERR, "No finalize handler for ME %08x.\n", did); - } -} -#else /* !__SMM__ */ - -/* Determine the path that we should take based on ME status */ -static me_bios_path intel_me_path(device_t dev) -{ - me_bios_path path = ME_DISABLE_BIOS_PATH; - struct me_hfs hfs; - struct me_gmes gmes; - - /* S3 wake skips all MKHI messages */ - if (acpi_is_wakeup_s3()) - return ME_S3WAKE_BIOS_PATH; - - pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); - pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES); - - /* Check and dump status */ - intel_me_status(&hfs, &gmes); - - /* Check Current Working State */ - switch (hfs.working_state) { - case ME_HFS_CWS_NORMAL: - path = ME_NORMAL_BIOS_PATH; - break; - case ME_HFS_CWS_REC: - path = ME_RECOVERY_BIOS_PATH; - break; - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check Current Operation Mode */ - switch (hfs.operation_mode) { - case ME_HFS_MODE_NORMAL: - break; - case ME_HFS_MODE_DEBUG: - case ME_HFS_MODE_DIS: - case ME_HFS_MODE_OVER_JMPR: - case ME_HFS_MODE_OVER_MEI: - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check for any error code and valid firmware */ - if (hfs.error_code || hfs.fpt_bad) - path = ME_ERROR_BIOS_PATH; - -#if CONFIG_ELOG - if (path != ME_NORMAL_BIOS_PATH) { - struct elog_event_data_me_extended data = { - .current_working_state = hfs.working_state, - .operation_state = hfs.operation_state, - .operation_mode = hfs.operation_mode, - .error_code = hfs.error_code, - .progress_code = gmes.progress_code, - .current_pmevent = gmes.current_pmevent, - .current_state = gmes.current_state, - }; - elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); - elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, - &data, sizeof(data)); - } -#endif - - return path; -} - -/* Prepare ME for MEI messages */ -static int intel_mei_setup(device_t dev) -{ - struct resource *res; - struct mei_csr host; - u32 reg32; - - /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res || res->base == 0 || res->size == 0) { - printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); - return -1; - } - mei_base_address = res2mmio(res, 0, 0); - - /* Ensure Memory and Bus Master bits are set */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Clean up status for next message */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); - - return 0; -} - -/* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(device_t dev) -{ - struct me_heres status; - u32 extend[8] = {0}; - int i, count = 0; - - pci_read_dword_ptr(dev, &status, PCI_ME_HERES); - if (!status.extend_feature_present) { - printk(BIOS_ERR, "ME: Extend Feature not present\n"); - return -1; - } - - if (!status.extend_reg_valid) { - printk(BIOS_ERR, "ME: Extend Register not valid\n"); - return -1; - } - - switch (status.extend_reg_algorithm) { - case PCI_ME_EXT_SHA1: - count = 5; - printk(BIOS_DEBUG, "ME: Extend SHA-1: "); - break; - case PCI_ME_EXT_SHA256: - count = 8; - printk(BIOS_DEBUG, "ME: Extend SHA-256: "); - break; - default: - printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", - status.extend_reg_algorithm); - return -1; - } - - for (i = 0; i < count; ++i) { - extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); - printk(BIOS_DEBUG, "%08x", extend[i]); - } - printk(BIOS_DEBUG, "\n"); - -#if CONFIG_CHROMEOS - /* Save hash in NVS for the OS to verify */ - chromeos_set_me_hash(extend, count); -#endif - - return 0; -} - -/* Hide the ME virtual PCI devices */ -static void intel_me_hide(device_t dev) -{ - dev->enabled = 0; - pch_enable(dev); -} - -/* Check whether ME is present and do basic init */ -static void intel_me_init(device_t dev) -{ - me_bios_path path = intel_me_path(dev); - - /* Do initial setup and determine the BIOS path */ - printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); - - switch (path) { - case ME_S3WAKE_BIOS_PATH: - intel_me_hide(dev); - break; - - case ME_NORMAL_BIOS_PATH: - /* Validate the extend register */ - if (intel_me_extend_valid(dev) < 0) - break; /* TODO: force recovery mode */ - - /* Prepare MEI MMIO interface */ - if (intel_mei_setup(dev) < 0) - break; - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) - /* Print ME firmware version */ - mkhi_get_fw_version(); - /* Print ME firmware capabilities */ - mkhi_get_fwcaps(); -#endif - - /* - * Leave the ME unlocked in this path. - * It will be locked via SMI command later. - */ - break; - - case ME_ERROR_BIOS_PATH: - case ME_RECOVERY_BIOS_PATH: - case ME_DISABLE_BIOS_PATH: - case ME_FIRMWARE_UPDATE_BIOS_PATH: - break; - } -} - -static void set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations pci_ops = { - .set_subsystem = set_subsystem, -}; - -static struct device_operations device_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = intel_me_init, - .ops_pci = &pci_ops, -}; - -static const unsigned short pci_device_ids[] = { 0x1c3a, 0x2304, 0 }; - -static const struct pci_driver intel_me __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; - -#endif /* !__SMM__ */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me.h b/src/southbridge/intel/fsp_bd82x6x/me.h deleted file mode 100644 index 967d46bb67..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/me.h +++ /dev/null @@ -1,372 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _INTEL_ME_H -#define _INTEL_ME_H - -#define ME_RETRY 100000 /* 1 second */ -#define ME_DELAY 10 /* 10 us */ - -/* - * Management Engine PCI registers - */ - -#define PCI_CPU_DEVICE PCI_DEV(0,0,0) -#define PCI_CPU_MEBASE_L 0x70 /* Set by MRC */ -#define PCI_CPU_MEBASE_H 0x74 /* Set by MRC */ - -#define PCI_ME_HFS 0x40 -#define ME_HFS_CWS_RESET 0 -#define ME_HFS_CWS_INIT 1 -#define ME_HFS_CWS_REC 2 -#define ME_HFS_CWS_NORMAL 5 -#define ME_HFS_CWS_WAIT 6 -#define ME_HFS_CWS_TRANS 7 -#define ME_HFS_CWS_INVALID 8 -#define ME_HFS_STATE_PREBOOT 0 -#define ME_HFS_STATE_M0_UMA 1 -#define ME_HFS_STATE_M3 4 -#define ME_HFS_STATE_M0 5 -#define ME_HFS_STATE_BRINGUP 6 -#define ME_HFS_STATE_ERROR 7 -#define ME_HFS_ERROR_NONE 0 -#define ME_HFS_ERROR_UNCAT 1 -#define ME_HFS_ERROR_IMAGE 3 -#define ME_HFS_ERROR_DEBUG 4 -#define ME_HFS_MODE_NORMAL 0 -#define ME_HFS_MODE_DEBUG 2 -#define ME_HFS_MODE_DIS 3 -#define ME_HFS_MODE_OVER_JMPR 4 -#define ME_HFS_MODE_OVER_MEI 5 -#define ME_HFS_BIOS_DRAM_ACK 1 -#define ME_HFS_ACK_NO_DID 0 -#define ME_HFS_ACK_RESET 1 -#define ME_HFS_ACK_PWR_CYCLE 2 -#define ME_HFS_ACK_S3 3 -#define ME_HFS_ACK_S4 4 -#define ME_HFS_ACK_S5 5 -#define ME_HFS_ACK_GBL_RESET 6 -#define ME_HFS_ACK_CONTINUE 7 - -struct me_hfs { - u32 working_state: 4; - u32 mfg_mode: 1; - u32 fpt_bad: 1; - u32 operation_state: 3; - u32 fw_init_complete: 1; - u32 ft_bup_ld_flr: 1; - u32 update_in_progress: 1; - u32 error_code: 4; - u32 operation_mode: 4; - u32 reserved: 4; - u32 boot_options_present: 1; - u32 ack_data: 3; - u32 bios_msg_ack: 4; -} __attribute__ ((packed)); - -#define PCI_ME_UMA 0x44 - -struct me_uma { - u32 size: 6; - u32 reserved_1: 10; - u32 valid: 1; - u32 reserved_0: 14; - u32 set_to_one: 1; -} __attribute__ ((packed)); - -#define PCI_ME_H_GS 0x4c -#define ME_INIT_DONE 1 -#define ME_INIT_STATUS_SUCCESS 0 -#define ME_INIT_STATUS_NOMEM 1 -#define ME_INIT_STATUS_ERROR 2 - -struct me_did { - u32 uma_base: 16; - u32 reserved: 8; - u32 status: 4; - u32 init_done: 4; -} __attribute__ ((packed)); - -#define PCI_ME_GMES 0x48 -#define ME_GMES_PHASE_ROM 0 -#define ME_GMES_PHASE_BUP 1 -#define ME_GMES_PHASE_UKERNEL 2 -#define ME_GMES_PHASE_POLICY 3 -#define ME_GMES_PHASE_MODULE 4 -#define ME_GMES_PHASE_UNKNOWN 5 -#define ME_GMES_PHASE_HOST 6 - -struct me_gmes { - u32 bist_in_prog : 1; - u32 icc_prog_sts : 2; - u32 invoke_mebx : 1; - u32 cpu_replaced_sts : 1; - u32 mbp_rdy : 1; - u32 mfs_failure : 1; - u32 warm_rst_req_for_df : 1; - u32 cpu_replaced_valid : 1; - u32 reserved_1 : 2; - u32 fw_upd_ipu : 1; - u32 reserved_2 : 4; - u32 current_state: 8; - u32 current_pmevent: 4; - u32 progress_code: 4; -} __attribute__ ((packed)); - -#define PCI_ME_HERES 0xbc -#define PCI_ME_EXT_SHA1 0x00 -#define PCI_ME_EXT_SHA256 0x02 -#define PCI_ME_HER(x) (0xc0+(4*(x))) - -struct me_heres { - u32 extend_reg_algorithm: 4; - u32 reserved: 26; - u32 extend_feature_present: 1; - u32 extend_reg_valid: 1; -} __attribute__ ((packed)); - -/* - * Management Engine MEI registers - */ - -#define MEI_H_CB_WW 0x00 -#define MEI_H_CSR 0x04 -#define MEI_ME_CB_RW 0x08 -#define MEI_ME_CSR_HA 0x0c - -struct mei_csr { - u32 interrupt_enable: 1; - u32 interrupt_status: 1; - u32 interrupt_generate: 1; - u32 ready: 1; - u32 reset: 1; - u32 reserved: 3; - u32 buffer_read_ptr: 8; - u32 buffer_write_ptr: 8; - u32 buffer_depth: 8; -} __attribute__ ((packed)); - -#define MEI_ADDRESS_CORE 0x01 -#define MEI_ADDRESS_AMT 0x02 -#define MEI_ADDRESS_RESERVED 0x03 -#define MEI_ADDRESS_WDT 0x04 -#define MEI_ADDRESS_MKHI 0x07 -#define MEI_ADDRESS_ICC 0x08 -#define MEI_ADDRESS_THERMAL 0x09 - -#define MEI_HOST_ADDRESS 0 - -struct mei_header { - u32 client_address: 8; - u32 host_address: 8; - u32 length: 9; - u32 reserved: 6; - u32 is_complete: 1; -} __attribute__ ((packed)); - -#define MKHI_GROUP_ID_CBM 0x00 -#define MKHI_GROUP_ID_FWCAPS 0x03 -#define MKHI_GROUP_ID_MDES 0x08 -#define MKHI_GROUP_ID_GEN 0xff - -#define MKHI_GLOBAL_RESET 0x0b - -#define MKHI_FWCAPS_GET_RULE 0x02 - -#define MKHI_MDES_ENABLE 0x09 - -#define MKHI_GET_FW_VERSION 0x02 -#define MKHI_END_OF_POST 0x0c -#define MKHI_FEATURE_OVERRIDE 0x14 - -struct mkhi_header { - u32 group_id: 8; - u32 command: 7; - u32 is_response: 1; - u32 reserved: 8; - u32 result: 8; -} __attribute__ ((packed)); - -struct me_fw_version { - u16 code_minor; - u16 code_major; - u16 code_build_number; - u16 code_hot_fix; - u16 recovery_minor; - u16 recovery_major; - u16 recovery_build_number; - u16 recovery_hot_fix; -} __attribute__ ((packed)); - - -#define HECI_EOP_STATUS_SUCCESS 0x0 -#define HECI_EOP_PERFORM_GLOBAL_RESET 0x1 - -#define CBM_RR_GLOBAL_RESET 0x01 - -#define GLOBAL_RESET_BIOS_MRC 0x01 -#define GLOBAL_RESET_BIOS_POST 0x02 -#define GLOBAL_RESET_MEBX 0x03 - -struct me_global_reset { - u8 request_origin; - u8 reset_type; -} __attribute__ ((packed)); - -typedef enum { - ME_NORMAL_BIOS_PATH, - ME_S3WAKE_BIOS_PATH, - ME_ERROR_BIOS_PATH, - ME_RECOVERY_BIOS_PATH, - ME_DISABLE_BIOS_PATH, - ME_FIRMWARE_UPDATE_BIOS_PATH, -} me_bios_path; - -/* Defined in me_status.c for both romstage and ramstage */ -void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes); - -#ifdef __PRE_RAM__ -void intel_early_me_status(void); -int intel_early_me_init(void); -int intel_early_me_uma_size(void); -int intel_early_me_init_done(u8 status); -#endif - -#ifdef __SMM__ -void intel_me_finalize_smm(void); -void intel_me8_finalize_smm(void); -#endif -typedef struct { - u32 major_version : 16; - u32 minor_version : 16; - u32 hotfix_version : 16; - u32 build_version : 16; -} __attribute__ ((packed)) mbp_fw_version_name; - -typedef struct { - u8 num_icc_profiles; - u8 icc_profile_soft_strap; - u8 icc_profile_index; - u8 reserved; - u32 register_lock_mask[3]; -} __attribute__ ((packed)) mbp_icc_profile; - -typedef struct { - u32 full_net : 1; - u32 std_net : 1; - u32 manageability : 1; - u32 small_business : 1; - u32 l3manageability : 1; - u32 intel_at : 1; - u32 intel_cls : 1; - u32 reserved : 3; - u32 intel_mpc : 1; - u32 icc_over_clocking : 1; - u32 pavp : 1; - u32 reserved_1 : 4; - u32 ipv6 : 1; - u32 kvm : 1; - u32 och : 1; - u32 vlan : 1; - u32 tls : 1; - u32 reserved_4 : 1; - u32 wlan : 1; - u32 reserved_5 : 8; -} __attribute__ ((packed)) mefwcaps_sku; - -typedef struct { - u16 lock_state : 1; - u16 authenticate_module : 1; - u16 s3authentication : 1; - u16 flash_wear_out : 1; - u16 flash_variable_security : 1; - u16 wwan3gpresent : 1; - u16 wwan3goob : 1; - u16 reserved : 9; -} __attribute__ ((packed)) tdt_state_flag; - -typedef struct { - u8 state; - u8 last_theft_trigger; - tdt_state_flag flags; -} __attribute__ ((packed)) tdt_state_info; - -typedef struct { - u32 platform_target_usage_type : 4; - u32 platform_target_market_type : 2; - u32 super_sku : 1; - u32 reserved : 1; - u32 intel_me_fw_image_type : 4; - u32 platform_brand : 4; - u32 reserved_1 : 16; -} __attribute__ ((packed)) platform_type_rule_data; - -typedef struct { - mefwcaps_sku fw_capabilities; - u8 available; -} mbp_fw_caps; - -typedef struct { - u16 device_id; - u16 fuse_test_flags; - u32 umchid[4]; -} __attribute__ ((packed)) mbp_rom_bist_data; - -typedef struct { - u32 key[8]; -} mbp_platform_key; - -typedef struct { - platform_type_rule_data rule_data; - u8 available; -} mbp_plat_type; - -typedef struct { - mbp_fw_version_name fw_version_name; - mbp_fw_caps fw_caps_sku; - mbp_rom_bist_data rom_bist_data; - mbp_platform_key platform_key; - mbp_plat_type fw_plat_type; - mbp_icc_profile icc_profile; - tdt_state_info at_state; - u32 mfsintegrity; -} me_bios_payload; - -typedef struct { - u32 mbp_size : 8; - u32 num_entries : 8; - u32 rsvd : 16; -} __attribute__ ((packed)) mbp_header; - -typedef struct { - u32 app_id : 8; - u32 item_id : 8; - u32 length : 8; - u32 rsvd : 8; -} __attribute__ ((packed)) mbp_item_header; - -struct me_fwcaps { - u32 id; - u8 length; - mefwcaps_sku caps_sku; - u8 reserved[3]; -} __attribute__ ((packed)); - -#endif /* _INTEL_ME_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me_8.x.c b/src/southbridge/intel/fsp_bd82x6x/me_8.x.c deleted file mode 100644 index 292dbba96b..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/me_8.x.c +++ /dev/null @@ -1,928 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -/* - * This is a ramstage driver for the Intel Management Engine found in the - * 6-series chipset. It handles the required boot-time messages over the - * MMIO-based Management Engine Interface to tell the ME that the BIOS is - * finished with POST. Additional messages are defined for debug but are - * not used unless the console loglevel is high enough. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef __SMM__ -# include -# include -#endif - -#include "me.h" -#include "pch.h" - -#if CONFIG_CHROMEOS -#include -#include -#endif - -#ifndef __SMM__ -/* Path that the BIOS should take based on ME state */ -static const char *me_bios_path_values[] = { - [ME_NORMAL_BIOS_PATH] = "Normal", - [ME_S3WAKE_BIOS_PATH] = "S3 Wake", - [ME_ERROR_BIOS_PATH] = "Error", - [ME_RECOVERY_BIOS_PATH] = "Recovery", - [ME_DISABLE_BIOS_PATH] = "Disable", - [ME_FIRMWARE_UPDATE_BIOS_PATH] = "Firmware Update", -}; -static int intel_me_read_mbp(me_bios_payload *mbp_data); -#endif - -/* MMIO base address for MEI interface */ -static u32 *mei_base_address; - -#if CONFIG_DEBUG_INTEL_ME -static void mei_dump(void *ptr, int dword, int offset, const char *type) -{ - struct mei_csr *csr; - - printk(BIOS_SPEW, "%-9s[%02x] : ", type, offset); - - switch (offset) { - case MEI_H_CSR: - case MEI_ME_CSR_HA: - csr = ptr; - if (!csr) { - printk(BIOS_SPEW, "ERROR: 0x%08x\n", dword); - break; - } - printk(BIOS_SPEW, "cbd=%u cbrp=%02u cbwp=%02u ready=%u " - "reset=%u ig=%u is=%u ie=%u\n", csr->buffer_depth, - csr->buffer_read_ptr, csr->buffer_write_ptr, - csr->ready, csr->reset, csr->interrupt_generate, - csr->interrupt_status, csr->interrupt_enable); - break; - case MEI_ME_CB_RW: - case MEI_H_CB_WW: - printk(BIOS_SPEW, "CB: 0x%08x\n", dword); - break; - default: - printk(BIOS_SPEW, "0x%08x\n", offset); - break; - } -} -#else -# define mei_dump(ptr,dword,offset,type) do {} while (0) -#endif - -/* - * ME/MEI access helpers using memcpy to avoid aliasing. - */ - -static inline void mei_read_dword_ptr(void *ptr, int offset) -{ - u32 dword = read32(mei_base_address + (offset/sizeof(u32))); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "READ"); -} - -static inline void mei_write_dword_ptr(void *ptr, int offset) -{ - u32 dword = 0; - memcpy(&dword, ptr, sizeof(dword)); - write32(mei_base_address + (offset/sizeof(u32)), dword); - mei_dump(ptr, dword, offset, "WRITE"); -} - -#ifndef __SMM__ -static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset) -{ - u32 dword = pci_read_config32(dev, offset); - memcpy(ptr, &dword, sizeof(dword)); - mei_dump(ptr, dword, offset, "PCI READ"); -} -#endif - -static inline void read_host_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_H_CSR); -} - -static inline void write_host_csr(struct mei_csr *csr) -{ - mei_write_dword_ptr(csr, MEI_H_CSR); -} - -static inline void read_me_csr(struct mei_csr *csr) -{ - mei_read_dword_ptr(csr, MEI_ME_CSR_HA); -} - -static inline void write_cb(u32 dword) -{ - write32(mei_base_address + (MEI_H_CB_WW/sizeof(u32)), dword); - mei_dump(NULL, dword, MEI_H_CB_WW, "WRITE"); -} - -static inline u32 read_cb(void) -{ - u32 dword = read32(mei_base_address + (MEI_ME_CB_RW/sizeof(u32))); - mei_dump(NULL, dword, MEI_ME_CB_RW, "READ"); - return dword; -} - -/* Wait for ME ready bit to be asserted */ -static int mei_wait_for_me_ready(void) -{ - struct mei_csr me; - unsigned try = ME_RETRY; - - while (try--) { - read_me_csr(&me); - if (me.ready) - return 0; - udelay(ME_DELAY); - } - - printk(BIOS_ERR, "ME: failed to become ready\n"); - return -1; -} - -static void mei_reset(void) -{ - struct mei_csr host; - - if (mei_wait_for_me_ready() < 0) - return; - - /* Reset host and ME circular buffers for next message */ - read_host_csr(&host); - host.reset = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - if (mei_wait_for_me_ready() < 0) - return; - - /* Re-init and indicate host is ready */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); -} - -static int mei_send_msg(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data) -{ - struct mei_csr host; - unsigned ndata, n; - u32 *data; - - /* Number of dwords to write, ignoring MKHI */ - ndata = mei->length >> 2; - - /* Pad non-dword aligned request message length */ - if (mei->length & 3) - ndata++; - if (!ndata) { - printk(BIOS_DEBUG, "ME: request does not include MKHI\n"); - return -1; - } - ndata++; /* Add MEI header */ - - /* - * Make sure there is still room left in the circular buffer. - * Reset the buffer pointers if the requested message will not fit. - */ - read_host_csr(&host); - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: circular buffer full, resetting...\n"); - mei_reset(); - read_host_csr(&host); - } - - /* - * This implementation does not handle splitting large messages - * across multiple transactions. Ensure the requested length - * will fit in the available circular buffer depth. - */ - if ((host.buffer_depth - host.buffer_write_ptr) < ndata) { - printk(BIOS_ERR, "ME: message (%u) too large for buffer (%u)\n", - ndata + 2, host.buffer_depth); - return -1; - } - - /* Write MEI header */ - mei_write_dword_ptr(mei, MEI_H_CB_WW); - ndata--; - - /* Write MKHI header */ - mei_write_dword_ptr(mkhi, MEI_H_CB_WW); - ndata--; - - /* Write message data */ - data = req_data; - for (n = 0; n < ndata; ++n) - write_cb(*data++); - - /* Generate interrupt to the ME */ - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - /* Make sure ME is ready after sending request data */ - return mei_wait_for_me_ready(); -} - -static int mei_recv_msg(struct mkhi_header *mkhi, - void *rsp_data, int rsp_bytes) -{ - struct mei_header mei_rsp; - struct mkhi_header mkhi_rsp; - struct mei_csr me, host; - unsigned ndata, n/*, me_data_len*/; - unsigned expected; - u32 *data; - - /* Total number of dwords to read from circular buffer */ - expected = (rsp_bytes + sizeof(mei_rsp) + sizeof(mkhi_rsp)) >> 2; - if (rsp_bytes & 3) - expected++; - - /* - * The interrupt status bit does not appear to indicate that the - * message has actually been received. Instead we wait until the - * expected number of dwords are present in the circular buffer. - */ - for (n = ME_RETRY; n; --n) { - read_me_csr(&me); - if ((me.buffer_write_ptr - me.buffer_read_ptr) >= expected) - break; - udelay(ME_DELAY); - } - if (!n) { - printk(BIOS_ERR, "ME: timeout waiting for data: expected " - "%u, available %u\n", expected, - me.buffer_write_ptr - me.buffer_read_ptr); - return -1; - } - - /* Read and verify MEI response header from the ME */ - mei_read_dword_ptr(&mei_rsp, MEI_ME_CB_RW); - if (!mei_rsp.is_complete) { - printk(BIOS_ERR, "ME: response is not complete\n"); - return -1; - } - - /* Handle non-dword responses and expect at least MKHI header */ - ndata = mei_rsp.length >> 2; - if (mei_rsp.length & 3) - ndata++; - if (ndata != (expected - 1)) { - printk(BIOS_ERR, "ME: response is missing data %d != %d\n", - ndata, (expected - 1)); - return -1; - } - - /* Read and verify MKHI response header from the ME */ - mei_read_dword_ptr(&mkhi_rsp, MEI_ME_CB_RW); - if (!mkhi_rsp.is_response || - mkhi->group_id != mkhi_rsp.group_id || - mkhi->command != mkhi_rsp.command) { - printk(BIOS_ERR, "ME: invalid response, group %u ?= %u," - "command %u ?= %u, is_response %u\n", mkhi->group_id, - mkhi_rsp.group_id, mkhi->command, mkhi_rsp.command, - mkhi_rsp.is_response); - return -1; - } - ndata--; /* MKHI header has been read */ - - /* Make sure caller passed a buffer with enough space */ - if (ndata != (rsp_bytes >> 2)) { - printk(BIOS_ERR, "ME: not enough room in response buffer: " - "%u != %u\n", ndata, rsp_bytes >> 2); - return -1; - } - - /* Read response data from the circular buffer */ - data = rsp_data; - for (n = 0; n < ndata; ++n) - *data++ = read_cb(); - - /* Tell the ME that we have consumed the response */ - read_host_csr(&host); - host.interrupt_status = 1; - host.interrupt_generate = 1; - write_host_csr(&host); - - return mei_wait_for_me_ready(); -} - -static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi, - void *req_data, void *rsp_data, int rsp_bytes) -{ - if (mei_send_msg(mei, mkhi, req_data) < 0) - return -1; - if (mei_recv_msg(mkhi, rsp_data, rsp_bytes) < 0) - return -1; - return 0; -} - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__) -static inline void print_cap(const char *name, int state) -{ - printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n", - name, state ? " en" : "dis"); -} - -static void me_print_fw_version(mbp_fw_version_name *vers_name) -{ - if (!vers_name->major_version) { - printk(BIOS_ERR, "ME: mbp missing version report\n"); - return; - } - - printk(BIOS_DEBUG, "ME: found version %d.%d.%d.%d\n", - vers_name->major_version, vers_name->minor_version, - vers_name->hotfix_version, vers_name->build_version); -} - -/* Get ME Firmware Capabilities */ -static int mkhi_get_fwcaps(mefwcaps_sku *cap) -{ - u32 rule_id = 0; - struct me_fwcaps cap_msg; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_FWCAPS, - .command = MKHI_FWCAPS_GET_RULE, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi) + sizeof(rule_id), - }; - - /* Send request and wait for response */ - if (mei_sendrecv(&mei, &mkhi, &rule_id, &cap_msg, sizeof(cap_msg)) - < 0) { - printk(BIOS_ERR, "ME: GET FWCAPS message failed\n"); - return -1; - } - *cap = cap_msg.caps_sku; - return 0; -} - -/* Get ME Firmware Capabilities */ -static void me_print_fwcaps(mbp_fw_caps *caps_section) -{ - mefwcaps_sku *cap = &caps_section->fw_capabilities; - if (!caps_section->available) { - printk(BIOS_ERR, "ME: mbp missing fwcaps report\n"); - if (mkhi_get_fwcaps(cap)) - return; - } - - print_cap("Full Network manageability", cap->full_net); - print_cap("Regular Network manageability", cap->std_net); - print_cap("Manageability", cap->manageability); - print_cap("Small business technology", cap->small_business); - print_cap("Level III manageability", cap->l3manageability); - print_cap("IntelR Anti-Theft (AT)", cap->intel_at); - print_cap("IntelR Capability Licensing Service (CLS)", cap->intel_cls); - print_cap("IntelR Power Sharing Technology (MPC)", cap->intel_mpc); - print_cap("ICC Over Clocking", cap->icc_over_clocking); - print_cap("Protected Audio Video Path (PAVP)", cap->pavp); - print_cap("IPV6", cap->ipv6); - print_cap("KVM Remote Control (KVM)", cap->kvm); - print_cap("Outbreak Containment Heuristic (OCH)", cap->och); - print_cap("Virtual LAN (VLAN)", cap->vlan); - print_cap("TLS", cap->tls); - print_cap("Wireless LAN (WLAN)", cap->wlan); -} -#endif - -#if CONFIG_CHROMEOS && 0 /* DISABLED */ -/* Tell ME to issue a global reset */ -static int mkhi_global_reset(void) -{ - struct me_global_reset reset = { - .request_origin = GLOBAL_RESET_BIOS_POST, - .reset_type = CBM_RR_GLOBAL_RESET, - }; - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_CBM, - .command = MKHI_GLOBAL_RESET, - }; - struct mei_header mei = { - .is_complete = 1, - .length = sizeof(mkhi) + sizeof(reset), - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - }; - - /* Send request and wait for response */ - printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); - if (mei_sendrecv(&mei, &mkhi, &reset, NULL, 0) < 0) { - /* No response means reset will happen shortly... */ - halt(); - } - - /* If the ME responded it rejected the reset request */ - printk(BIOS_ERR, "ME: Global Reset failed\n"); - return -1; -} -#endif - -#ifdef __SMM__ - -/* Send END OF POST message to the ME */ -static int mkhi_end_of_post(void) -{ - struct mkhi_header mkhi = { - .group_id = MKHI_GROUP_ID_GEN, - .command = MKHI_END_OF_POST, - }; - struct mei_header mei = { - .is_complete = 1, - .host_address = MEI_HOST_ADDRESS, - .client_address = MEI_ADDRESS_MKHI, - .length = sizeof(mkhi), - }; - - u32 eop_ack; - - /* Send request and wait for response */ - printk(BIOS_NOTICE, "ME: %s\n", __FUNCTION__); - if (mei_sendrecv(&mei, &mkhi, NULL, &eop_ack, sizeof(eop_ack)) < 0) { - printk(BIOS_ERR, "ME: END OF POST message failed\n"); - return -1; - } - - printk(BIOS_INFO, "ME: END OF POST message successful (%d)\n", eop_ack); - return 0; -} - -void intel_me8_finalize_smm(void) -{ - struct me_hfs hfs; - u32 reg32; - - mei_base_address = (u32 *) - (pcie_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf); - - /* S3 path will have hidden this device already */ - if (!mei_base_address || mei_base_address == (u32 *)0xfffffff0) - return; - - /* Make sure ME is in a mode that expects EOP */ - reg32 = pcie_read_config32(PCH_ME_DEV, PCI_ME_HFS); - memcpy(&hfs, ®32, sizeof(u32)); - - /* Abort and leave device alone if not normal mode */ - if (hfs.fpt_bad || - hfs.working_state != ME_HFS_CWS_NORMAL || - hfs.operation_mode != ME_HFS_MODE_NORMAL) - return; - - /* Try to send EOP command so ME stops accepting other commands */ - mkhi_end_of_post(); - - /* Make sure IO is disabled */ - reg32 = pcie_read_config32(PCH_ME_DEV, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pcie_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32); - - /* Hide the PCI device */ - RCBA32_OR(FD2, PCH_DISABLE_MEI1); -} - -#else /* !__SMM__ */ - -/* Determine the path that we should take based on ME status */ -static me_bios_path intel_me_path(device_t dev) -{ - me_bios_path path = ME_DISABLE_BIOS_PATH; - struct me_hfs hfs; - struct me_gmes gmes; - - /* S3 wake skips all MKHI messages */ - if (acpi_is_wakeup_s3()) - return ME_S3WAKE_BIOS_PATH; - - pci_read_dword_ptr(dev, &hfs, PCI_ME_HFS); - pci_read_dword_ptr(dev, &gmes, PCI_ME_GMES); - - /* Check and dump status */ - intel_me_status(&hfs, &gmes); - - /* Check Current Working State */ - switch (hfs.working_state) { - case ME_HFS_CWS_NORMAL: - path = ME_NORMAL_BIOS_PATH; - break; - case ME_HFS_CWS_REC: - path = ME_RECOVERY_BIOS_PATH; - break; - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check Current Operation Mode */ - switch (hfs.operation_mode) { - case ME_HFS_MODE_NORMAL: - break; - case ME_HFS_MODE_DEBUG: - case ME_HFS_MODE_DIS: - case ME_HFS_MODE_OVER_JMPR: - case ME_HFS_MODE_OVER_MEI: - default: - path = ME_DISABLE_BIOS_PATH; - break; - } - - /* Check for any error code and valid firmware and MBP */ - if (hfs.error_code || hfs.fpt_bad) - path = ME_ERROR_BIOS_PATH; - - /* Check if the MBP is ready */ - if (!gmes.mbp_rdy) { - printk(BIOS_CRIT, "%s: mbp is not ready!\n", - __FUNCTION__); - path = ME_ERROR_BIOS_PATH; - } - -#if CONFIG_ELOG - if (path != ME_NORMAL_BIOS_PATH) { - struct elog_event_data_me_extended data = { - .current_working_state = hfs.working_state, - .operation_state = hfs.operation_state, - .operation_mode = hfs.operation_mode, - .error_code = hfs.error_code, - .progress_code = gmes.progress_code, - .current_pmevent = gmes.current_pmevent, - .current_state = gmes.current_state, - }; - elog_add_event_byte(ELOG_TYPE_MANAGEMENT_ENGINE, path); - elog_add_event_raw(ELOG_TYPE_MANAGEMENT_ENGINE_EXT, - &data, sizeof(data)); - } -#endif - - return path; -} - -/* Prepare ME for MEI messages */ -static int intel_mei_setup(device_t dev) -{ - struct resource *res; - struct mei_csr host; - u32 reg32; - - /* Find the MMIO base for the ME interface */ - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (!res || res->base == 0 || res->size == 0) { - printk(BIOS_DEBUG, "ME: MEI resource not present!\n"); - return -1; - } - mei_base_address = (u32 *)(uintptr_t)res->base; - - /* Ensure Memory and Bus Master bits are set */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Clean up status for next message */ - read_host_csr(&host); - host.interrupt_generate = 1; - host.ready = 1; - host.reset = 0; - write_host_csr(&host); - - return 0; -} - -/* Read the Extend register hash of ME firmware */ -static int intel_me_extend_valid(device_t dev) -{ - struct me_heres status; - u32 extend[8] = {0}; - int i, count = 0; - - pci_read_dword_ptr(dev, &status, PCI_ME_HERES); - if (!status.extend_feature_present) { - printk(BIOS_ERR, "ME: Extend Feature not present\n"); - return -1; - } - - if (!status.extend_reg_valid) { - printk(BIOS_ERR, "ME: Extend Register not valid\n"); - return -1; - } - - switch (status.extend_reg_algorithm) { - case PCI_ME_EXT_SHA1: - count = 5; - printk(BIOS_DEBUG, "ME: Extend SHA-1: "); - break; - case PCI_ME_EXT_SHA256: - count = 8; - printk(BIOS_DEBUG, "ME: Extend SHA-256: "); - break; - default: - printk(BIOS_ERR, "ME: Extend Algorithm %d unknown\n", - status.extend_reg_algorithm); - return -1; - } - - for (i = 0; i < count; ++i) { - extend[i] = pci_read_config32(dev, PCI_ME_HER(i)); - printk(BIOS_DEBUG, "%08x", extend[i]); - } - printk(BIOS_DEBUG, "\n"); - -#if CONFIG_CHROMEOS - /* Save hash in NVS for the OS to verify */ - chromeos_set_me_hash(extend, count); -#endif - - return 0; -} - -/* Hide the ME virtual PCI devices */ -static void intel_me_hide(device_t dev) -{ - dev->enabled = 0; - pch_enable(dev); -} - -/* Check whether ME is present and do basic init */ -static void intel_me_init(device_t dev) -{ - me_bios_path path = intel_me_path(dev); - me_bios_payload mbp_data; - - /* Do initial setup and determine the BIOS path */ - printk(BIOS_NOTICE, "ME: BIOS path: %s\n", me_bios_path_values[path]); - - switch (path) { - case ME_S3WAKE_BIOS_PATH: - intel_me_hide(dev); - break; - - case ME_NORMAL_BIOS_PATH: - /* Validate the extend register */ - if (intel_me_extend_valid(dev) < 0) - break; /* TODO: force recovery mode */ - - /* Prepare MEI MMIO interface */ - if (intel_mei_setup(dev) < 0) - break; - - if(intel_me_read_mbp(&mbp_data)) - break; - -#if CONFIG_CHROMEOS && 0 /* DISABLED */ - /* - * Unlock ME in recovery mode. - */ - if (recovery_mode_enabled()) { - /* Unlock ME flash region */ - mkhi_hmrfpo_enable(); - - /* Issue global reset */ - mkhi_global_reset(); - return; - } -#endif - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) - me_print_fw_version(&mbp_data.fw_version_name); - me_print_fwcaps(&mbp_data.fw_caps_sku); -#endif - - /* - * Leave the ME unlocked in this path. - * It will be locked via SMI command later. - */ - break; - - case ME_ERROR_BIOS_PATH: - case ME_RECOVERY_BIOS_PATH: - case ME_DISABLE_BIOS_PATH: - case ME_FIRMWARE_UPDATE_BIOS_PATH: - break; - } -} - -static void set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations pci_ops = { - .set_subsystem = set_subsystem, -}; - -static struct device_operations device_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = intel_me_init, - .ops_pci = &pci_ops, -}; - -static const struct pci_driver intel_me __pci_driver = { - .ops = &device_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = 0x1e3a, -}; - -/****************************************************************************** - * */ -static u32 me_to_host_words_pending(void) -{ - struct mei_csr me; - read_me_csr(&me); - if (!me.ready) - return 0; - return (me.buffer_write_ptr - me.buffer_read_ptr) & - (me.buffer_depth - 1); -} - -#if 0 -/* This function is not yet being used, keep it in for the future. */ -static u32 host_to_me_words_room(void) -{ - struct mei_csr csr; - - read_me_csr(&csr); - if (!csr.ready) - return 0; - - read_host_csr(&csr); - return (csr.buffer_read_ptr - csr.buffer_write_ptr - 1) & - (csr.buffer_depth - 1); -} -#endif -/* - * mbp seems to be following its own flow, let's retrieve it in a dedicated - * function. - */ -static int intel_me_read_mbp(me_bios_payload *mbp_data) -{ - mbp_header mbp_hdr; - mbp_item_header mbp_item_hdr; - u32 me2host_pending; - u32 mbp_item_id; - struct mei_csr host; - - me2host_pending = me_to_host_words_pending(); - if (!me2host_pending) { - printk(BIOS_ERR, "ME: no mbp data!\n"); - return -1; - } - - /* we know for sure that at least the header is there */ - mei_read_dword_ptr(&mbp_hdr, MEI_ME_CB_RW); - - if ((mbp_hdr.num_entries > (mbp_hdr.mbp_size / 2)) || - (me2host_pending < mbp_hdr.mbp_size)) { - printk(BIOS_ERR, "ME: mbp of %d entries, total size %d words" - " buffer contains %d words\n", - mbp_hdr.num_entries, mbp_hdr.mbp_size, - me2host_pending); - return -1; - } - - me2host_pending--; - memset(mbp_data, 0, sizeof(*mbp_data)); - - while (mbp_hdr.num_entries--) { - u32* copy_addr; - u32 copy_size, buffer_room; - void *p; - - if (!me2host_pending) { - printk(BIOS_ERR, "ME: no mbp data %d entries to go!\n", - mbp_hdr.num_entries + 1); - return -1; - } - - mei_read_dword_ptr(&mbp_item_hdr, MEI_ME_CB_RW); - - if (mbp_item_hdr.length > me2host_pending) { - printk(BIOS_ERR, "ME: insufficient mbp data %d " - "entries to go!\n", - mbp_hdr.num_entries + 1); - return -1; - } - - me2host_pending -= mbp_item_hdr.length; - - mbp_item_id = (((u32)mbp_item_hdr.item_id) << 8) + - mbp_item_hdr.app_id; - - copy_size = mbp_item_hdr.length - 1; - -#define SET_UP_COPY(field) { copy_addr = (u32 *)&mbp_data->field; \ - buffer_room = sizeof(mbp_data->field) / sizeof(u32); \ - break; \ - } - - p = &mbp_item_hdr; - printk(BIOS_INFO, "ME: MBP item header %8.8x\n", *((u32*)p)); - - switch(mbp_item_id) { - case 0x101: - SET_UP_COPY(fw_version_name); - - case 0x102: - SET_UP_COPY(icc_profile); - - case 0x103: - SET_UP_COPY(at_state); - - case 0x201: - mbp_data->fw_caps_sku.available = 1; - SET_UP_COPY(fw_caps_sku.fw_capabilities); - - case 0x301: - SET_UP_COPY(rom_bist_data); - - case 0x401: - SET_UP_COPY(platform_key); - - case 0x501: - mbp_data->fw_plat_type.available = 1; - SET_UP_COPY(fw_plat_type.rule_data); - - case 0x601: - SET_UP_COPY(mfsintegrity); - - default: - printk(BIOS_ERR, "ME: unknown mbp item id 0x%x!!!\n", - mbp_item_id); - return -1; - } - - if (buffer_room != copy_size) { - printk(BIOS_ERR, "ME: buffer room %d != %d copy size" - " for item 0x%x!!!\n", - buffer_room, copy_size, mbp_item_id); - return -1; - } - while(copy_size--) - *copy_addr++ = read_cb(); - } - - read_host_csr(&host); - host.interrupt_generate = 1; - write_host_csr(&host); - - { - int cntr = 0; - while(host.interrupt_generate) { - read_host_csr(&host); - cntr++; - } - printk(BIOS_SPEW, "ME: mbp read OK after %d cycles\n", cntr); - } - - return 0; -} - -#endif /* !__SMM__ */ diff --git a/src/southbridge/intel/fsp_bd82x6x/me_status.c b/src/southbridge/intel/fsp_bd82x6x/me_status.c deleted file mode 100644 index 37fcf57677..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/me_status.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2011 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include "me.h" - -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) -/* HFS1[3:0] Current Working State Values */ -static const char *me_cws_values[] = { - [ME_HFS_CWS_RESET] = "Reset", - [ME_HFS_CWS_INIT] = "Initializing", - [ME_HFS_CWS_REC] = "Recovery", - [ME_HFS_CWS_NORMAL] = "Normal", - [ME_HFS_CWS_WAIT] = "Platform Disable Wait", - [ME_HFS_CWS_TRANS] = "OP State Transition", - [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In" -}; - -/* HFS1[8:6] Current Operation State Values */ -static const char *me_opstate_values[] = { - [ME_HFS_STATE_PREBOOT] = "Preboot", - [ME_HFS_STATE_M0_UMA] = "M0 with UMA", - [ME_HFS_STATE_M3] = "M3 without UMA", - [ME_HFS_STATE_M0] = "M0 without UMA", - [ME_HFS_STATE_BRINGUP] = "Bring up", - [ME_HFS_STATE_ERROR] = "M0 without UMA but with error" -}; - -/* HFS[19:16] Current Operation Mode Values */ -static const char *me_opmode_values[] = { - [ME_HFS_MODE_NORMAL] = "Normal", - [ME_HFS_MODE_DEBUG] = "Debug", - [ME_HFS_MODE_DIS] = "Soft Temporary Disable", - [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper", - [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message" -}; - -/* HFS[15:12] Error Code Values */ -static const char *me_error_values[] = { - [ME_HFS_ERROR_NONE] = "No Error", - [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure", - [ME_HFS_ERROR_IMAGE] = "Image Failure", - [ME_HFS_ERROR_DEBUG] = "Debug Failure" -}; - -/* GMES[31:28] ME Progress Code */ -static const char *me_progress_values[] = { - [ME_GMES_PHASE_ROM] = "ROM Phase", - [ME_GMES_PHASE_BUP] = "BUP Phase", - [ME_GMES_PHASE_UKERNEL] = "uKernel Phase", - [ME_GMES_PHASE_POLICY] = "Policy Module", - [ME_GMES_PHASE_MODULE] = "Module Loading", - [ME_GMES_PHASE_UNKNOWN] = "Unknown", - [ME_GMES_PHASE_HOST] = "Host Communication" -}; - -/* GMES[27:24] Power Management Event */ -static const char *me_pmevent_values[] = { - [0x00] = "Clean Moff->Mx wake", - [0x01] = "Moff->Mx wake after an error", - [0x02] = "Clean global reset", - [0x03] = "Global reset after an error", - [0x04] = "Clean Intel ME reset", - [0x05] = "Intel ME reset due to exception", - [0x06] = "Pseudo-global reset", - [0x07] = "S0/M0->Sx/M3", - [0x08] = "Sx/M3->S0/M0", - [0x09] = "Non-power cycle reset", - [0x0a] = "Power cycle reset through M3", - [0x0b] = "Power cycle reset through Moff", - [0x0c] = "Sx/Mx->Sx/Moff" -}; - -/* Progress Code 0 states */ -static const char *me_progress_rom_values[] = { - [0x00] = "BEGIN", - [0x06] = "DISABLE" -}; - -/* Progress Code 1 states */ -static const char *me_progress_bup_values[] = { - [0x00] = "Initialization starts", - [0x01] = "Disable the host wake event", - [0x04] = "Flow determination start process", - [0x08] = "Error reading/matching the VSCC table in the descriptor", - [0x0a] = "Check to see if straps say ME DISABLED", - [0x0b] = "Timeout waiting for PWROK", - [0x0d] = "Possibly handle BUP manufacturing override strap", - [0x11] = "Bringup in M3", - [0x12] = "Bringup in M0", - [0x13] = "Flow detection error", - [0x15] = "M3 clock switching error", - [0x18] = "M3 kernel load", - [0x1c] = "T34 missing - cannot program ICC", - [0x1f] = "Waiting for DID BIOS message", - [0x20] = "Waiting for DID BIOS message failure", - [0x21] = "DID reported an error", - [0x22] = "Enabling UMA", - [0x23] = "Enabling UMA error", - [0x24] = "Sending DID Ack to BIOS", - [0x25] = "Sending DID Ack to BIOS error", - [0x26] = "Switching clocks in M0", - [0x27] = "Switching clocks in M0 error", - [0x28] = "ME in temp disable", - [0x32] = "M0 kernel load", -}; - -/* Progress Code 3 states */ -static const char *me_progress_policy_values[] = { - [0x00] = "Entery into Policy Module", - [0x03] = "Received S3 entry", - [0x04] = "Received S4 entry", - [0x05] = "Received S5 entry", - [0x06] = "Received UPD entry", - [0x07] = "Received PCR entry", - [0x08] = "Received NPCR entry", - [0x09] = "Received host wake", - [0x0a] = "Received AC<>DC switch", - [0x0b] = "Received DRAM Init Done", - [0x0c] = "VSCC Data not found for flash device", - [0x0d] = "VSCC Table is not valid", - [0x0e] = "Flash Partition Boundary is outside address space", - [0x0f] = "ME cannot access the chipset descriptor region", - [0x10] = "Required VSCC values for flash parts do not match", -}; -#endif - -void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes) -{ -#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) - /* Check Current States */ - printk(BIOS_DEBUG, "ME: FW Partition Table : %s\n", - hfs->fpt_bad ? "BAD" : "OK"); - printk(BIOS_DEBUG, "ME: Bringup Loader Failure : %s\n", - hfs->ft_bup_ld_flr ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Firmware Init Complete : %s\n", - hfs->fw_init_complete ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Manufacturing Mode : %s\n", - hfs->mfg_mode ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Boot Options Present : %s\n", - hfs->boot_options_present ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Update In Progress : %s\n", - hfs->update_in_progress ? "YES" : "NO"); - printk(BIOS_DEBUG, "ME: Current Working State : %s\n", - me_cws_values[hfs->working_state]); - printk(BIOS_DEBUG, "ME: Current Operation State : %s\n", - me_opstate_values[hfs->operation_state]); - printk(BIOS_DEBUG, "ME: Current Operation Mode : %s\n", - me_opmode_values[hfs->operation_mode]); - printk(BIOS_DEBUG, "ME: Error Code : %s\n", - me_error_values[hfs->error_code]); - printk(BIOS_DEBUG, "ME: Progress Phase : %s\n", - me_progress_values[gmes->progress_code]); - printk(BIOS_DEBUG, "ME: Power Management Event : %s\n", - me_pmevent_values[gmes->current_pmevent]); - - printk(BIOS_DEBUG, "ME: Progress Phase State : "); - switch (gmes->progress_code) { - case ME_GMES_PHASE_ROM: /* ROM Phase */ - printk(BIOS_DEBUG, "%s", - me_progress_rom_values[gmes->current_state]); - break; - - case ME_GMES_PHASE_BUP: /* Bringup Phase */ - if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) - && me_progress_bup_values[gmes->current_state]) - printk(BIOS_DEBUG, "%s", - me_progress_bup_values[gmes->current_state]); - else - printk(BIOS_DEBUG, "0x%02x", gmes->current_state); - break; - - case ME_GMES_PHASE_POLICY: /* Policy Module Phase */ - if (gmes->current_state < ARRAY_SIZE(me_progress_policy_values) - && me_progress_policy_values[gmes->current_state]) - printk(BIOS_DEBUG, "%s", - me_progress_policy_values[gmes->current_state]); - else - printk(BIOS_DEBUG, "0x%02x", gmes->current_state); - break; - - case ME_GMES_PHASE_HOST: /* Host Communication Phase */ - if (!gmes->current_state) - printk(BIOS_DEBUG, "Host communication established"); - else - printk(BIOS_DEBUG, "0x%02x", gmes->current_state); - break; - - default: - printk(BIOS_DEBUG, "Unknown 0x%02x", gmes->current_state); - } - printk(BIOS_DEBUG, "\n"); -#endif -} diff --git a/src/southbridge/intel/fsp_bd82x6x/nvs.h b/src/southbridge/intel/fsp_bd82x6x/nvs.h deleted file mode 100644 index 7eb487a0af..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/nvs.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include "vendorcode/google/chromeos/gnvs.h" -typedef struct { - /* Miscellaneous */ - u16 osys; /* 0x00 - Operating System */ - u8 smif; /* 0x02 - SMI function call ("TRAP") */ - u8 prm0; /* 0x03 - SMI function call parameter */ - u8 prm1; /* 0x04 - SMI function call parameter */ - u8 scif; /* 0x05 - SCI function call (via _L00) */ - u8 prm2; /* 0x06 - SCI function call parameter */ - u8 prm3; /* 0x07 - SCI function call parameter */ - u8 lckf; /* 0x08 - Global Lock function for EC */ - u8 prm4; /* 0x09 - Lock function parameter */ - u8 prm5; /* 0x0a - Lock function parameter */ - u32 p80d; /* 0x0b - Debug port (IO 0x80) value */ - u8 lids; /* 0x0f - LID state (open = 1) */ - u8 pwrs; /* 0x10 - Power state (AC = 1) */ - /* Thermal policy */ - u8 tlvl; /* 0x11 - Throttle Level Limit */ - u8 flvl; /* 0x12 - Current FAN Level */ - u8 tcrt; /* 0x13 - Critical Threshold */ - u8 tpsv; /* 0x14 - Passive Threshold */ - u8 tmax; /* 0x15 - CPU Tj_max */ - u8 f0of; /* 0x16 - FAN 0 OFF Threshold */ - u8 f0on; /* 0x17 - FAN 0 ON Threshold */ - u8 f0pw; /* 0x18 - FAN 0 PWM value */ - u8 f1of; /* 0x19 - FAN 1 OFF Threshold */ - u8 f1on; /* 0x1a - FAN 1 ON Threshold */ - u8 f1pw; /* 0x1b - FAN 1 PWM value */ - u8 f2of; /* 0x1c - FAN 2 OFF Threshold */ - u8 f2on; /* 0x1d - FAN 2 ON Threshold */ - u8 f2pw; /* 0x1e - FAN 2 PWM value */ - u8 f3of; /* 0x1f - FAN 3 OFF Threshold */ - u8 f3on; /* 0x20 - FAN 3 ON Threshold */ - u8 f3pw; /* 0x21 - FAN 3 PWM value */ - u8 f4of; /* 0x22 - FAN 4 OFF Threshold */ - u8 f4on; /* 0x23 - FAN 4 ON Threshold */ - u8 f4pw; /* 0x24 - FAN 4 PWM value */ - u8 tmps; /* 0x25 - Temperature Sensor ID */ - u8 rsvd3[2]; - /* Processor Identification */ - u8 apic; /* 0x28 - APIC enabled */ - u8 mpen; /* 0x29 - MP capable/enabled */ - u8 pcp0; /* 0x2a - PDC CPU/CORE 0 */ - u8 pcp1; /* 0x2b - PDC CPU/CORE 1 */ - u8 ppcm; /* 0x2c - Max. PPC state */ - u8 pcnt; /* 0x2d - Processor Count */ - u8 rsvd4[4]; - /* Super I/O & CMOS config */ - u8 natp; /* 0x32 - SIO type */ - u8 s5u0; /* 0x33 - Enable USB0 in S5 */ - u8 s5u1; /* 0x34 - Enable USB1 in S5 */ - u8 s3u0; /* 0x35 - Enable USB0 in S3 */ - u8 s3u1; /* 0x36 - Enable USB1 in S3 */ - u8 s33g; /* 0x37 - Enable S3 in 3G */ - u32 obsolete_cmem; /* 0x38 - CBMEM TOC */ - /* Integrated Graphics Device */ - u8 igds; /* 0x3c - IGD state */ - u8 tlst; /* 0x3d - Display Toggle List Pointer */ - u8 cadl; /* 0x3e - currently attached devices */ - u8 padl; /* 0x3f - previously attached devices */ - u16 cste; /* 0x40 - current display state */ - u16 nste; /* 0x42 - next display state */ - u16 sste; /* 0x44 - set display state */ - u8 ndid; /* 0x46 - number of device ids */ - u32 did[5]; /* 0x47 - 5b device id 1..5 */ - u8 rsvd5[0x9]; - /* Backlight Control */ - u8 blcs; /* 0x64 - Backlight Control possible */ - u8 brtl; - u8 odds; - u8 rsvd6[0x7]; - /* Ambient Light Sensors*/ - u8 alse; /* 0x6e - ALS enable */ - u8 alaf; - u8 llow; - u8 lhih; - u8 rsvd7[0x6]; - /* Extended Mobile Access */ - u8 emae; /* 0x78 - EMA enable */ - u16 emap; /* 0x79 - EMA pointer */ - u16 emal; /* 0x7a - EMA Length */ - u8 rsvd8[0x5]; - /* MEF */ - u8 mefe; /* 0x82 - MEF enable */ - u8 rsvd9[0x9]; - /* TPM support */ - u8 tpmp; /* 0x8c - TPM */ - u8 tpme; - u8 rsvd10[8]; - /* SATA */ - u8 gtf0[7]; /* 0x96 - GTF task file buffer for port 0 */ - u8 gtf1[7]; - u8 gtf2[7]; - u8 idem; - u8 idet; - u8 rsvd11[7]; - /* IGD OpRegion (not implemented yet) */ - u32 aslb; /* 0xb4 - IGD OpRegion Base Address */ - u8 ibtt; /* 0xb8 - IGD boot type */ - u8 ipat; /* 0xb9 - IGD panel type */ - u8 itvf; /* 0xba - IGD TV format */ - u8 itvm; /* 0xbb - IGD TV minor format */ - u8 ipsc; /* 0xbc - IGD Panel Scaling */ - u8 iblc; /* 0xbd - IGD BLC configuration */ - u8 ibia; /* 0xbe - IGD BIA configuration */ - u8 issc; /* 0xbf - IGD SSC configuration */ - u8 i409; /* 0xc0 - IGD 0409 modified settings */ - u8 i509; /* 0xc1 - IGD 0509 modified settings */ - u8 i609; /* 0xc2 - IGD 0609 modified settings */ - u8 i709; /* 0xc3 - IGD 0709 modified settings */ - u8 idmm; /* 0xc4 - IGD Power Conservation */ - u8 idms; /* 0xc5 - IGD DVMT memory size */ - u8 if1e; /* 0xc6 - IGD Function 1 Enable */ - u8 hvco; /* 0xc7 - IGD HPLL VCO */ - u32 nxd[8]; /* 0xc8 - IGD next state DIDx for _DGS */ - u8 isci; /* 0xe8 - IGD SMI/SCI mode (0: SCI) */ - u8 pavp; /* 0xe9 - IGD PAVP data */ - u8 rsvd12; /* 0xea - rsvd */ - u8 oscc; /* 0xeb - PCIe OSC control */ - u8 npce; /* 0xec - native pcie support */ - u8 plfl; /* 0xed - platform flavor */ - u8 brev; /* 0xee - board revision */ - u8 dpbm; /* 0xef - digital port b mode */ - u8 dpcm; /* 0xf0 - digital port c mode */ - u8 dpdm; /* 0xf1 - digital port c mode */ - u8 alfp; /* 0xf2 - active lfp */ - u8 imon; /* 0xf3 - current graphics turbo imon value */ - u8 mmio; /* 0xf4 - 64bit mmio support */ - u8 rsvd13[11]; /* 0xf5 - rsvd */ - - /* ChromeOS specific (starts at 0x100)*/ - chromeos_acpi_t chromeos; -} __attribute__((packed)) global_nvs_t; - -#ifdef __SMM__ -/* Used in SMM to find the ACPI GNVS address */ -global_nvs_t *smm_get_gnvs(void); -#endif -void acpi_create_gnvs(global_nvs_t *gnvs); diff --git a/src/southbridge/intel/fsp_bd82x6x/pch.c b/src/southbridge/intel/fsp_bd82x6x/pch.c deleted file mode 100644 index c14d12919c..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/pch.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include "pch.h" - -static int pch_revision_id = -1; -static int pch_type = -1; - -int pch_silicon_revision(void) -{ - if (pch_revision_id < 0) - pch_revision_id = pci_read_config8( - dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PCI_REVISION_ID); - return pch_revision_id; -} - -int pch_silicon_type(void) -{ - if (pch_type < 0) - pch_type = pci_read_config8( - dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PCI_DEVICE_ID + 1); - return pch_type; -} - -int pch_silicon_supported(int type, int rev) -{ - int cur_type = pch_silicon_type(); - int cur_rev = pch_silicon_revision(); - - switch (type) { - case PCH_TYPE_CPT: - /* CougarPoint minimum revision */ - if (cur_type == PCH_TYPE_CPT && cur_rev >= rev) - return 1; - /* PantherPoint any revision */ - if (cur_type == PCH_TYPE_PPT) - return 1; - break; - - case PCH_TYPE_PPT: - /* PantherPoint minimum revision */ - if (cur_type == PCH_TYPE_PPT && cur_rev >= rev) - return 1; - break; - } - - return 0; -} - -/* Set bit in Function Disble register to hide this device */ -static void pch_hide_devfn(unsigned devfn) -{ - switch (devfn) { - case PCI_DEVFN(22, 0): /* MEI #1 */ - RCBA32_OR(FD2, PCH_DISABLE_MEI1); - break; - case PCI_DEVFN(22, 1): /* MEI #2 */ - RCBA32_OR(FD2, PCH_DISABLE_MEI2); - break; - case PCI_DEVFN(22, 2): /* IDE-R */ - RCBA32_OR(FD2, PCH_DISABLE_IDER); - break; - case PCI_DEVFN(22, 3): /* KT */ - RCBA32_OR(FD2, PCH_DISABLE_KT); - break; - case PCI_DEVFN(25, 0): /* Gigabit Ethernet */ - RCBA32_OR(BUC, PCH_DISABLE_GBE); - break; - case PCI_DEVFN(26, 0): /* EHCI #2 */ - RCBA32_OR(FD, PCH_DISABLE_EHCI2); - break; - case PCI_DEVFN(27, 0): /* HD Audio Controller */ - RCBA32_OR(FD, PCH_DISABLE_HD_AUDIO); - break; - case PCI_DEVFN(28, 0): /* PCI Express Root Port 1 */ - case PCI_DEVFN(28, 1): /* PCI Express Root Port 2 */ - case PCI_DEVFN(28, 2): /* PCI Express Root Port 3 */ - case PCI_DEVFN(28, 3): /* PCI Express Root Port 4 */ - case PCI_DEVFN(28, 4): /* PCI Express Root Port 5 */ - case PCI_DEVFN(28, 5): /* PCI Express Root Port 6 */ - case PCI_DEVFN(28, 6): /* PCI Express Root Port 7 */ - case PCI_DEVFN(28, 7): /* PCI Express Root Port 8 */ - RCBA32_OR(FD, PCH_DISABLE_PCIE(PCI_FUNC(devfn))); - break; - case PCI_DEVFN(29, 0): /* EHCI #1 */ - RCBA32_OR(FD, PCH_DISABLE_EHCI1); - break; - case PCI_DEVFN(30, 0): /* PCI-to-PCI Bridge */ - RCBA32_OR(FD, PCH_DISABLE_P2P); - break; - case PCI_DEVFN(31, 0): /* LPC */ - RCBA32_OR(FD, PCH_DISABLE_LPC); - break; - case PCI_DEVFN(31, 2): /* SATA #1 */ - RCBA32_OR(FD, PCH_DISABLE_SATA1); - break; - case PCI_DEVFN(31, 3): /* SMBUS */ - RCBA32_OR(FD, PCH_DISABLE_SMBUS); - break; - case PCI_DEVFN(31, 5): /* SATA #22 */ - RCBA32_OR(FD, PCH_DISABLE_SATA2); - break; - case PCI_DEVFN(31, 6): /* Thermal Subsystem */ - RCBA32_OR(FD, PCH_DISABLE_THERMAL); - break; - } -} - -#define IOBP_RETRY 1000 -static inline int iobp_poll(void) -{ - unsigned try = IOBP_RETRY; - u32 data; - - while (try--) { - data = RCBA32(IOBPS); - if ((data & 1) == 0) - return 1; - udelay(10); - } - - printk(BIOS_ERR, "IOBP timeout\n"); - return 0; -} - -void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue) -{ - u32 data; - - /* Set the address */ - RCBA32(IOBPIRI) = address; - - /* READ OPCODE */ - if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) - RCBA32(IOBPS) = IOBPS_RW_BX; - else - RCBA32(IOBPS) = IOBPS_READ_AX; - if (!iobp_poll()) - return; - - /* Read IOBP data */ - data = RCBA32(IOBPD); - if (!iobp_poll()) - return; - - /* Check for successful transaction */ - if ((RCBA32(IOBPS) & 0x6) != 0) { - printk(BIOS_ERR, "IOBP read 0x%08x failed\n", address); - return; - } - - /* Update the data */ - data &= andvalue; - data |= orvalue; - - /* WRITE OPCODE */ - if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B0)) - RCBA32(IOBPS) = IOBPS_RW_BX; - else - RCBA32(IOBPS) = IOBPS_WRITE_AX; - if (!iobp_poll()) - return; - - /* Write IOBP data */ - RCBA32(IOBPD) = data; - if (!iobp_poll()) - return; -} - -/* Check if any port in set X to X+3 is enabled */ -static int pch_pcie_check_set_enabled(device_t dev) -{ - device_t port; - int port_func; - int dev_func = PCI_FUNC(dev->path.pci.devfn); - - printk(BIOS_DEBUG, "%s: check set enabled\n", dev_path(dev)); - - /* Go through static device tree list of devices - * because enumeration is still in progress */ - for (port = all_devices; port; port = port->next) { - /* Only care about PCIe root ports */ - if (PCI_SLOT(port->path.pci.devfn) != - PCI_SLOT(dev->path.pci.devfn)) - continue; - - /* Check if port is in range and enabled */ - port_func = PCI_FUNC(port->path.pci.devfn); - if (port_func >= dev_func && - port_func < (dev_func + 4) && - port->enabled) - return 1; - } - - /* None of the ports in this set are enabled */ - return 0; -} - -/* RPFN is a write-once register so keep a copy until it is written */ -static u32 new_rpfn; - -/* Swap function numbers assigned to two PCIe Root Ports */ -static void pch_pcie_function_swap(u8 old_fn, u8 new_fn) -{ - u32 old_rpfn = new_rpfn; - - printk(BIOS_DEBUG, "PCH: Remap PCIe function %d to %d\n", - old_fn, new_fn); - - new_rpfn &= ~(RPFN_FNMASK(old_fn) | RPFN_FNMASK(new_fn)); - - /* Old function set to new function and disabled */ - new_rpfn |= RPFN_FNSET(old_fn, RPFN_FNGET(old_rpfn, new_fn)); - new_rpfn |= RPFN_FNSET(new_fn, RPFN_FNGET(old_rpfn, old_fn)); -} - -/* Update devicetree with new Root Port function number assignment */ -static void pch_pcie_devicetree_update(void) -{ - device_t dev; - - /* Update the function numbers in the static devicetree */ - for (dev = all_devices; dev; dev = dev->next) { - u8 new_devfn; - - /* Only care about PCH PCIe root ports */ - if (PCI_SLOT(dev->path.pci.devfn) != - PCH_PCIE_DEV_SLOT) - continue; - - /* Determine the new devfn for this port */ - new_devfn = PCI_DEVFN(PCH_PCIE_DEV_SLOT, - RPFN_FNGET(new_rpfn, - PCI_FUNC(dev->path.pci.devfn))); - - if (dev->path.pci.devfn != new_devfn) { - printk(BIOS_DEBUG, - "PCH: PCIe map %02x.%1x -> %02x.%1x\n", - PCI_SLOT(dev->path.pci.devfn), - PCI_FUNC(dev->path.pci.devfn), - PCI_SLOT(new_devfn), PCI_FUNC(new_devfn)); - - dev->path.pci.devfn = new_devfn; - } - } -} - -/* Special handling for PCIe Root Port devices */ -static void pch_pcie_enable(device_t dev) -{ - struct southbridge_intel_fsp_bd82x6x_config *config = dev->chip_info; - u32 reg32; - - /* - * Save a copy of the Root Port Function Number map when - * starting to walk the list of PCIe Root Ports so it can - * be updated locally and written out when the last port - * has been processed. - */ - if (PCI_FUNC(dev->path.pci.devfn) == 0) { - new_rpfn = RCBA32(RPFN); - - /* - * Enable Root Port coalescing if the first port is disabled - * or the other devices will not be enumerated by the OS. - */ - if (!dev->enabled) - config->pcie_port_coalesce = 1; - - if (config->pcie_port_coalesce) - printk(BIOS_INFO, - "PCH: PCIe Root Port coalescing is enabled\n"); - } - - if (!dev->enabled) { - printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); - - /* - * PCIE Power Savings for PantherPoint and CougarPoint/B1+ - * - * If PCIe 0-3 disabled set Function 0 0xE2[0] = 1 - * If PCIe 4-7 disabled set Function 4 0xE2[0] = 1 - * - * This check is done here instead of pcie driver - * because the pcie driver enable() handler is not - * called unless the device is enabled. - */ - if ((PCI_FUNC(dev->path.pci.devfn) == 0 || - PCI_FUNC(dev->path.pci.devfn) == 4)) { - /* Handle workaround for PPT and CPT/B1+ */ - if (pch_silicon_supported(PCH_TYPE_CPT, PCH_STEP_B1) && - !pch_pcie_check_set_enabled(dev)) { - u8 reg8 = pci_read_config8(dev, 0xe2); - reg8 |= 1; - pci_write_config8(dev, 0xe2, reg8); - } - - /* - * Enable Clock Gating for shared PCIe resources - * before disabling this particular port. - */ - pci_write_config8(dev, 0xe1, 0x3c); - } - - /* Ensure memory, io, and bus master are all disabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Do not claim downstream transactions for PCIe ports */ - new_rpfn |= RPFN_HIDE(PCI_FUNC(dev->path.pci.devfn)); - - /* Hide this device if possible */ - pch_hide_devfn(dev->path.pci.devfn); - } else { - int fn; - - /* - * Check if there is a lower disabled port to swap with this - * port in order to maintain linear order starting at zero. - */ - if (config->pcie_port_coalesce) { - for (fn=0; fn < PCI_FUNC(dev->path.pci.devfn); fn++) { - if (!(new_rpfn & RPFN_HIDE(fn))) - continue; - - /* Swap places with this function */ - pch_pcie_function_swap( - PCI_FUNC(dev->path.pci.devfn), fn); - break; - } - } - - /* Enable SERR */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_SERR; - pci_write_config32(dev, PCI_COMMAND, reg32); - } - - /* - * When processing the last PCIe root port we can now - * update the Root Port Function Number and Hide register. - */ - if (PCI_FUNC(dev->path.pci.devfn) == 7) { - printk(BIOS_SPEW, "PCH: RPFN 0x%08x -> 0x%08x\n", - RCBA32(RPFN), new_rpfn); - RCBA32(RPFN) = new_rpfn; - - /* Update static devictree with new function numbers */ - if (config->pcie_port_coalesce) - pch_pcie_devicetree_update(); - } -} - -void pch_enable(device_t dev) -{ - u32 reg32; - - /* PCH PCIe Root Ports get special handling */ - if (PCI_SLOT(dev->path.pci.devfn) == PCH_PCIE_DEV_SLOT) - return pch_pcie_enable(dev); - - if (!dev->enabled) { - printk(BIOS_DEBUG, "%s: Disabling device\n", dev_path(dev)); - - /* Ensure memory, io, and bus master are all disabled */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~(PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | PCI_COMMAND_IO); - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* Hide this device if possible */ - pch_hide_devfn(dev->path.pci.devfn); - } else { - /* Enable SERR */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 |= PCI_COMMAND_SERR; - pci_write_config32(dev, PCI_COMMAND, reg32); - } -} - -struct chip_operations southbridge_intel_fsp_bd82x6x_ops = { - CHIP_NAME("Intel Series 6/7 (Cougar Point/Panther Point) Southbridge") - .enable_dev = pch_enable, -}; diff --git a/src/southbridge/intel/fsp_bd82x6x/pch.h b/src/southbridge/intel/fsp_bd82x6x/pch.h deleted file mode 100644 index 9e3b4da1e9..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/pch.h +++ /dev/null @@ -1,589 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef SOUTHBRIDGE_INTEL_FSP_BD82X6X_PCH_H -#define SOUTHBRIDGE_INTEL_FSP_BD82X6X_PCH_H - -/* PCH types */ -#define PCH_TYPE_CPT 0x1c /* CougarPoint */ -#define PCH_TYPE_PPT 0x1e /* IvyBridge */ - -/* PCH stepping values for LPC device */ -#define PCH_STEP_A0 0 -#define PCH_STEP_A1 1 -#define PCH_STEP_B0 2 -#define PCH_STEP_B1 3 -#define PCH_STEP_B2 4 -#define PCH_STEP_B3 5 - -/* - * It does not matter where we put the SMBus I/O base, as long as we - * keep it consistent and don't interfere with other devices. Stage2 - * will relocate this anyways. - * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE - * again. But handling static BARs is a generic problem that should be - * solved in the device allocator. - */ -#define SMBUS_IO_BASE 0x0500 -#define SMBUS_SLAVE_ADDR 0x24 -/* TODO Make sure these don't get changed by stage2 */ -#define DEFAULT_GPIOBASE 0x0480 -#define DEFAULT_PMBASE 0x0400 - -#ifndef __ACPI__ -#define DEFAULT_RCBA ((u8 *)0xfed1c000) -#else -#define DEFAULT_RCBA 0xfed1c000 -#endif - -#ifndef __ACPI__ -#define DEBUG_PERIODIC_SMIS 0 - -#if defined (__SMM__) && !defined(__ASSEMBLER__) -void intel_pch_finalize_smm(void); -#endif - -#if !defined(__ASSEMBLER__) && !defined(__ROMCC__) -#if !defined(__PRE_RAM__) && !defined(__SMM__) -#include "chip.h" -int pch_silicon_revision(void); -int pch_silicon_type(void); -int pch_silicon_supported(int type, int rev); -void pch_enable(device_t dev); -void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue); -#if CONFIG_ELOG -void pch_log_state(void); -#endif -#else -/* writes an address and one byte of data */ -s16 smbus_write_single_byte(u8 device, u8 address, u8 data); - -/* Sends an address and reads one byte of data */ -int smbus_read_byte(unsigned device, unsigned address); - -/* writes a single byte of data to smbus without an address byte */ -s16 smbus_quick_write(u8 device, u8 data); - -/* gets one byte of data from smbus without writing an address. */ -s16 smbus_quick_read(u8 device); - -void enable_smbus(void); -void enable_usb_bar(void); -int early_spi_read(u32 offset, u32 size, u8 *buffer); -void sandybridge_sb_early_initialization(void); -void early_pch_init(void); -void display_fd_settings(void); -#endif -#endif - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 -#define MAINBOARD_POWER_KEEP 2 - -#ifndef CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL -#define CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL MAINBOARD_POWER_ON -#endif - -/* PCI Configuration Space (D30:F0): PCI2PCI */ -#define PSTS 0x06 -#define SMLT 0x1b -#define SECSTS 0x1e -#define INTR 0x3c -#define BCTRL 0x3e -#define SBR (1 << 6) -#define SEE (1 << 1) -#define PERE (1 << 0) - -#define PCH_EHCI1_DEV PCI_DEV(0, 0x1d, 0) -#define PCH_EHCI2_DEV PCI_DEV(0, 0x1a, 0) -#define PCH_ME_DEV PCI_DEV(0, 0x16, 0) -#define PCH_PCIE_DEV_SLOT 28 - -/* PCI Configuration Space (D31:F0): LPC */ -#define PCH_LPC_DEV PCI_DEV(0, 0x1f, 0) -#define SERIRQ_CNTL 0x64 - -#define GEN_PMCON_1 0xa0 -#define GEN_PMCON_2 0xa2 -#define GEN_PMCON_3 0xa4 -#define ETR3 0xac -#define ETR3_CWORWRE (1 << 18) -#define ETR3_CF9GR (1 << 20) - -/* GEN_PMCON_3 bits */ -#define RTC_BATTERY_DEAD (1 << 2) -#define RTC_POWER_FAILED (1 << 1) -#define SLEEP_AFTER_POWER_FAIL (1 << 0) - -#define PMBASE 0x40 -#define ACPI_CNTL 0x44 -#define BIOS_CNTL 0xDC -#define GPIO_BASE 0x48 /* LPC GPIO Base Address Register */ -#define GPIO_CNTL 0x4C /* LPC GPIO Control Register */ -#define GPIO_ROUT 0xb8 - -#define PIRQA_ROUT 0x60 -#define PIRQB_ROUT 0x61 -#define PIRQC_ROUT 0x62 -#define PIRQD_ROUT 0x63 -#define PIRQE_ROUT 0x68 -#define PIRQF_ROUT 0x69 -#define PIRQG_ROUT 0x6A -#define PIRQH_ROUT 0x6B - -#define LPC_IO_DEC 0x80 /* IO Decode Ranges Register */ -#define LPC_EN 0x82 /* LPC IF Enables Register */ -#define CNF2_LPC_EN (1 << 13) /* 0x4e/0x4f */ -#define CNF1_LPC_EN (1 << 12) /* 0x2e/0x2f */ -#define MC_LPC_EN (1 << 11) /* 0x62/0x66 */ -#define KBC_LPC_EN (1 << 10) /* 0x60/0x64 */ -#define GAMEH_LPC_EN (1 << 9) /* 0x208/0x20f */ -#define GAMEL_LPC_EN (1 << 8) /* 0x200/0x207 */ -#define FDD_LPC_EN (1 << 3) /* LPC_IO_DEC[12] */ -#define LPT_LPC_EN (1 << 2) /* LPC_IO_DEC[9:8] */ -#define COMB_LPC_EN (1 << 1) /* LPC_IO_DEC[6:4] */ -#define COMA_LPC_EN (1 << 0) /* LPC_IO_DEC[3:2] */ -#define LPC_GEN1_DEC 0x84 /* LPC IF Generic Decode Range 1 */ -#define LPC_GEN2_DEC 0x88 /* LPC IF Generic Decode Range 2 */ -#define LPC_GEN3_DEC 0x8c /* LPC IF Generic Decode Range 3 */ -#define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ - -/* PCI Configuration Space (D31:F1): IDE */ -#define PCH_IDE_DEV PCI_DEV(0, 0x1f, 1) -#define PCH_SATA_DEV PCI_DEV(0, 0x1f, 2) -#define PCH_SATA2_DEV PCI_DEV(0, 0x1f, 5) -#define INTR_LN 0x3c -#define IDE_TIM_PRI 0x40 /* IDE timings, primary */ -#define IDE_DECODE_ENABLE (1 << 15) -#define IDE_SITRE (1 << 14) -#define IDE_ISP_5_CLOCKS (0 << 12) -#define IDE_ISP_4_CLOCKS (1 << 12) -#define IDE_ISP_3_CLOCKS (2 << 12) -#define IDE_RCT_4_CLOCKS (0 << 8) -#define IDE_RCT_3_CLOCKS (1 << 8) -#define IDE_RCT_2_CLOCKS (2 << 8) -#define IDE_RCT_1_CLOCKS (3 << 8) -#define IDE_DTE1 (1 << 7) -#define IDE_PPE1 (1 << 6) -#define IDE_IE1 (1 << 5) -#define IDE_TIME1 (1 << 4) -#define IDE_DTE0 (1 << 3) -#define IDE_PPE0 (1 << 2) -#define IDE_IE0 (1 << 1) -#define IDE_TIME0 (1 << 0) -#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */ - -#define IDE_SDMA_CNT 0x48 /* Synchronous DMA control */ -#define IDE_SSDE1 (1 << 3) -#define IDE_SSDE0 (1 << 2) -#define IDE_PSDE1 (1 << 1) -#define IDE_PSDE0 (1 << 0) - -#define IDE_SDMA_TIM 0x4a - -#define IDE_CONFIG 0x54 /* IDE I/O Configuration Register */ -#define SIG_MODE_SEC_NORMAL (0 << 18) -#define SIG_MODE_SEC_TRISTATE (1 << 18) -#define SIG_MODE_SEC_DRIVELOW (2 << 18) -#define SIG_MODE_PRI_NORMAL (0 << 16) -#define SIG_MODE_PRI_TRISTATE (1 << 16) -#define SIG_MODE_PRI_DRIVELOW (2 << 16) -#define FAST_SCB1 (1 << 15) -#define FAST_SCB0 (1 << 14) -#define FAST_PCB1 (1 << 13) -#define FAST_PCB0 (1 << 12) -#define SCB1 (1 << 3) -#define SCB0 (1 << 2) -#define PCB1 (1 << 1) -#define PCB0 (1 << 0) - -#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ -#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ -#define SATA_SP 0xd0 /* Scratchpad */ - -/* SATA IOBP Registers */ -#define SATA_IOBP_SP0G3IR 0xea000151 -#define SATA_IOBP_SP1G3IR 0xea000051 - -/* PCI Configuration Space (D31:F3): SMBus */ -#define PCH_SMBUS_DEV PCI_DEV(0, 0x1f, 3) -#define SMB_BASE 0x20 -#define HOSTC 0x40 -#define SMB_RCV_SLVA 0x09 - -/* HOSTC bits */ -#define I2C_EN (1 << 2) -#define SMB_SMI_EN (1 << 1) -#define HST_EN (1 << 0) - -/* SMBus I/O bits. */ -#define SMBHSTSTAT 0x0 -#define SMBHSTCTL 0x2 -#define SMBHSTCMD 0x3 -#define SMBXMITADD 0x4 -#define SMBHSTDAT0 0x5 -#define SMBHSTDAT1 0x6 -#define SMBBLKDAT 0x7 -#define SMBTRNSADD 0x9 -#define SMBSLVDATA 0xa -#define SMLINK_PIN_CTL 0xe -#define SMBUS_PIN_CTL 0xf - -#define HSTSTS_HOST_BUSY (1 << 0) -#define HSTSTS_INTR (1 << 1) -#define HSTSTS_DEV_ERR (1 << 2) -#define HSTSTS_BUS_ERR (1 << 3) -#define HSTSTS_FAILED (1 << 4) -#define HSTSTS_SMBALERT_STS (1 << 5) -#define HSTSTS_INUSE_STS (1 << 6) -#define HSTSTS_BYTE_DONE_STS (1 << 7) - -#define SMBUS_TIMEOUT (10 * 1000 * 100) - - -/* Southbridge IO BARs */ - -#define GPIOBASE 0x48 - -#define PMBASE 0x40 - -/* Root Complex Register Block */ -#define RCBA 0xf0 - -#define RCBA8(x) *((volatile u8 *)(DEFAULT_RCBA + x)) -#define RCBA16(x) *((volatile u16 *)(DEFAULT_RCBA + x)) -#define RCBA32(x) *((volatile u32 *)(DEFAULT_RCBA + x)) - -#define RCBA_AND_OR(bits, x, and, or) \ - RCBA##bits(x) = ((RCBA##bits(x) & (and)) | (or)) -#define RCBA8_AND_OR(x, and, or) RCBA_AND_OR(8, x, and, or) -#define RCBA16_AND_OR(x, and, or) RCBA_AND_OR(16, x, and, or) -#define RCBA32_AND_OR(x, and, or) RCBA_AND_OR(32, x, and, or) -#define RCBA32_OR(x, or) RCBA_AND_OR(32, x, ~0UL, or) - -#define VCH 0x0000 /* 32bit */ -#define VCAP1 0x0004 /* 32bit */ -#define VCAP2 0x0008 /* 32bit */ -#define PVC 0x000c /* 16bit */ -#define PVS 0x000e /* 16bit */ - -#define V0CAP 0x0010 /* 32bit */ -#define V0CTL 0x0014 /* 32bit */ -#define V0STS 0x001a /* 16bit */ - -#define V1CAP 0x001c /* 32bit */ -#define V1CTL 0x0020 /* 32bit */ -#define V1STS 0x0026 /* 16bit */ - -#define RCTCL 0x0100 /* 32bit */ -#define ESD 0x0104 /* 32bit */ -#define ULD 0x0110 /* 32bit */ -#define ULBA 0x0118 /* 64bit */ - -#define RP1D 0x0120 /* 32bit */ -#define RP1BA 0x0128 /* 64bit */ -#define RP2D 0x0130 /* 32bit */ -#define RP2BA 0x0138 /* 64bit */ -#define RP3D 0x0140 /* 32bit */ -#define RP3BA 0x0148 /* 64bit */ -#define RP4D 0x0150 /* 32bit */ -#define RP4BA 0x0158 /* 64bit */ -#define HDD 0x0160 /* 32bit */ -#define HDBA 0x0168 /* 64bit */ -#define RP5D 0x0170 /* 32bit */ -#define RP5BA 0x0178 /* 64bit */ -#define RP6D 0x0180 /* 32bit */ -#define RP6BA 0x0188 /* 64bit */ - -#define RPC 0x0400 /* 32bit */ -#define RPFN 0x0404 /* 32bit */ - -/* Root Port configuratinon space hide */ -#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) -/* Get the function number assigned to a Root Port */ -#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) -/* Set the function number for a Root Port */ -#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) -/* Root Port function number mask */ -#define RPFN_FNMASK(port) (7 << ((port) * 4)) - -#define TRSR 0x1e00 /* 8bit */ -#define TRCR 0x1e10 /* 64bit */ -#define TWDR 0x1e18 /* 64bit */ - -#define IOTR0 0x1e80 /* 64bit */ -#define IOTR1 0x1e88 /* 64bit */ -#define IOTR2 0x1e90 /* 64bit */ -#define IOTR3 0x1e98 /* 64bit */ - -#define TCTL 0x3000 /* 8bit */ - -#define NOINT 0 -#define INTA 1 -#define INTB 2 -#define INTC 3 -#define INTD 4 - -#define DIR_IDR 12 /* Interrupt D Pin Offset */ -#define DIR_ICR 8 /* Interrupt C Pin Offset */ -#define DIR_IBR 4 /* Interrupt B Pin Offset */ -#define DIR_IAR 0 /* Interrupt A Pin Offset */ - -#define PIRQA 0 -#define PIRQB 1 -#define PIRQC 2 -#define PIRQD 3 -#define PIRQE 4 -#define PIRQF 5 -#define PIRQG 6 -#define PIRQH 7 - -/* IO Buffer Programming */ -#define IOBPIRI 0x2330 -#define IOBPD 0x2334 -#define IOBPS 0x2338 -#define IOBPS_RW_BX ((1 << 9)|(1 << 10)) -#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10)) -#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10)) - -#define D31IP 0x3100 /* 32bit */ -#define D31IP_TTIP 24 /* Thermal Throttle Pin */ -#define D31IP_SIP2 20 /* SATA Pin 2 */ -#define D31IP_SMIP 12 /* SMBUS Pin */ -#define D31IP_SIP 8 /* SATA Pin */ -#define D30IP 0x3104 /* 32bit */ -#define D30IP_PIP 0 /* PCI Bridge Pin */ -#define D29IP 0x3108 /* 32bit */ -#define D29IP_E1P 0 /* EHCI #1 Pin */ -#define D28IP 0x310c /* 32bit */ -#define D28IP_P8IP 28 /* PCI Express Port 8 */ -#define D28IP_P7IP 24 /* PCI Express Port 7 */ -#define D28IP_P6IP 20 /* PCI Express Port 6 */ -#define D28IP_P5IP 16 /* PCI Express Port 5 */ -#define D28IP_P4IP 12 /* PCI Express Port 4 */ -#define D28IP_P3IP 8 /* PCI Express Port 3 */ -#define D28IP_P2IP 4 /* PCI Express Port 2 */ -#define D28IP_P1IP 0 /* PCI Express Port 1 */ -#define D27IP 0x3110 /* 32bit */ -#define D27IP_ZIP 0 /* HD Audio Pin */ -#define D26IP 0x3114 /* 32bit */ -#define D26IP_E2P 0 /* EHCI #2 Pin */ -#define D25IP 0x3118 /* 32bit */ -#define D25IP_LIP 0 /* GbE LAN Pin */ -#define D22IP 0x3124 /* 32bit */ -#define D22IP_KTIP 12 /* KT Pin */ -#define D22IP_IDERIP 8 /* IDE-R Pin */ -#define D22IP_MEI2IP 4 /* MEI #2 Pin */ -#define D22IP_MEI1IP 0 /* MEI #1 Pin */ -#define D20IP 0x3128 /* 32bit */ -#define D20IP_XHCIIP 0 -#define D31IR 0x3140 /* 16bit */ -#define D30IR 0x3142 /* 16bit */ -#define D29IR 0x3144 /* 16bit */ -#define D28IR 0x3146 /* 16bit */ -#define D27IR 0x3148 /* 16bit */ -#define D26IR 0x314c /* 16bit */ -#define D25IR 0x3150 /* 16bit */ -#define D22IR 0x315c /* 16bit */ -#define D20IR 0x3160 /* 16bit */ -#define OIC 0x31fe /* 16bit */ -#define SOFT_RESET_CTRL 0x38f4 -#define SOFT_RESET_DATA 0x38f8 - -#define DIR_ROUTE(x,a,b,c,d) \ - RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ - ((b) << DIR_IBR) | ((a) << DIR_IAR)) - -#define RC 0x3400 /* 32bit */ -#define HPTC 0x3404 /* 32bit */ -#define GCS 0x3410 /* 32bit */ -#define BUC 0x3414 /* 32bit */ -#define PCH_DISABLE_GBE (1 << 5) -#define FD 0x3418 /* 32bit */ -#define DISPBDF 0x3424 /* 16bit */ -#define FD2 0x3428 /* 32bit */ -#define CG 0x341c /* 32bit */ - -/* Function Disable 1 RCBA 0x3418 */ -#define PCH_DISABLE_ALWAYS (1 << 0) -#define PCH_DISABLE_P2P (1 << 1) -#define PCH_DISABLE_SATA1 (1 << 2) -#define PCH_DISABLE_SMBUS (1 << 3) -#define PCH_DISABLE_HD_AUDIO (1 << 4) -#define PCH_DISABLE_EHCI2 (1 << 13) -#define PCH_DISABLE_LPC (1 << 14) -#define PCH_DISABLE_EHCI1 (1 << 15) -#define PCH_DISABLE_PCIE(x) (1 << (16 + x)) -#define PCH_DISABLE_THERMAL (1 << 24) -#define PCH_DISABLE_SATA2 (1 << 25) - -/* Function Disable 2 RCBA 0x3428 */ -#define PCH_DISABLE_KT (1 << 4) -#define PCH_DISABLE_IDER (1 << 3) -#define PCH_DISABLE_MEI2 (1 << 2) -#define PCH_DISABLE_MEI1 (1 << 1) -#define PCH_ENABLE_DBDF (1 << 0) - -/* ICH7 GPIOBASE */ -#define GPIO_USE_SEL 0x00 -#define GP_IO_SEL 0x04 -#define GP_LVL 0x0c -#define GPO_BLINK 0x18 -#define GPI_INV 0x2c -#define GPIO_USE_SEL2 0x30 -#define GP_IO_SEL2 0x34 -#define GP_LVL2 0x38 -#define GPIO_USE_SEL3 0x40 -#define GP_IO_SEL3 0x44 -#define GP_LVL3 0x48 -#define GP_RST_SEL1 0x60 -#define GP_RST_SEL2 0x64 -#define GP_RST_SEL3 0x68 - -/* ICH7 PMBASE */ -#define PM1_STS 0x00 -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define PRBTNOR_STS (1 << 11) -#define RTC_STS (1 << 10) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMROF_STS (1 << 0) -#define PM1_EN 0x02 -#define PCIEXPWAK_DIS (1 << 14) -#define RTC_EN (1 << 10) -#define PWRBTN_EN (1 << 8) -#define GBL_EN (1 << 5) -#define TMROF_EN (1 << 0) -#define PM1_CNT 0x04 -#define SLP_EN (1 << 13) -#define SLP_TYP (7 << 10) -#define SLP_TYP_S0 0 -#define SLP_TYP_S1 1 -#define SLP_TYP_S3 5 -#define SLP_TYP_S4 6 -#define SLP_TYP_S5 7 -#define GBL_RLS (1 << 2) -#define BM_RLD (1 << 1) -#define SCI_EN (1 << 0) -#define PM1_TMR 0x08 -#define PROC_CNT 0x10 -#define LV2 0x14 -#define LV3 0x15 -#define LV4 0x16 -#define PM2_CNT 0x50 // mobile only -#define GPE0_STS 0x20 -#define PME_B0_STS (1 << 13) -#define PME_STS (1 << 11) -#define BATLOW_STS (1 << 10) -#define PCI_EXP_STS (1 << 9) -#define RI_STS (1 << 8) -#define SMB_WAK_STS (1 << 7) -#define TCOSCI_STS (1 << 6) -#define SWGPE_STS (1 << 2) -#define HOT_PLUG_STS (1 << 1) -#define GPE0_EN 0x28 -#define PME_B0_EN (1 << 13) -#define PME_EN (1 << 11) -#define TCOSCI_EN (1 << 6) -#define SMI_EN 0x30 -#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic -#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic -#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS -#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) -#define MCSMI_EN (1 << 11) // Trap microcontroller range access -#define BIOS_RLS (1 << 7) // asserts SCI on bit set -#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set -#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# -#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# -#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic -#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit -#define EOS (1 << 1) // End of SMI (deassert SMI#) -#define GBL_SMI_EN (1 << 0) // SMI# generation at all? -#define SMI_STS 0x34 -#define ALT_GP_SMI_EN 0x38 -#define ALT_GP_SMI_STS 0x3a -#define GPE_CNTL 0x42 -#define DEVACT_STS 0x44 -#define SS_CNT 0x50 -#define C3_RES 0x54 -#define TCO1_STS 0x64 -#define DMISCI_STS (1 << 9) -#define TCO2_STS 0x66 - -/* - * SPI Opcode Menu setup for SPIBAR lockdown - * should support most common flash chips. - */ - -#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ -#define SPI_OPTYPE_0 0x01 /* Write, no address */ - -#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ -#define SPI_OPTYPE_1 0x03 /* Write, address required */ - -#define SPI_OPMENU_2 0x03 /* READ: Read Data */ -#define SPI_OPTYPE_2 0x02 /* Read, address required */ - -#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ -#define SPI_OPTYPE_3 0x00 /* Read, no address */ - -#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ -#define SPI_OPTYPE_4 0x03 /* Write, address required */ - -#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ -#define SPI_OPTYPE_5 0x00 /* Read, no address */ - -#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ -#define SPI_OPTYPE_6 0x03 /* Write, address required */ - -#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ -#define SPI_OPTYPE_7 0x02 /* Read, address required */ - -#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ - (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) -#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ - (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) - -#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ - (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ - (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ - (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) - -#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ - -#define SPIBAR_HSFS 0x3804 /* SPI hardware sequence status */ -#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ -#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ -#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ -#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ -#define SPIBAR_HSFC 0x3806 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) -#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ -#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ -#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ -#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ -#define SPIBAR_FADDR 0x3808 /* SPI flash address */ -#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ - -#endif /* __ACPI__ */ -#endif /* SOUTHBRIDGE_INTEL_BD82X6X_PCH_H */ diff --git a/src/southbridge/intel/fsp_bd82x6x/reset.c b/src/southbridge/intel/fsp_bd82x6x/reset.c deleted file mode 100644 index 886c4a5b7e..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/reset.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include - -void soft_reset(void) -{ - outb(0x04, 0xcf9); -} - -void hard_reset(void) -{ - outb(0x06, 0xcf9); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/sata.c b/src/southbridge/intel/fsp_bd82x6x/sata.c deleted file mode 100644 index fba5953538..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/sata.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2013 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include "pch.h" - -typedef struct southbridge_intel_fsp_bd82x6x_config config_t; - -static void sata_init(struct device *dev) -{ - u32 reg32; - u16 reg16; - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - printk(BIOS_DEBUG, "SATA: Initializing...\n"); - - if (config == NULL) { - printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); - return; - } - - /* SATA configuration is handled by the FSP */ - - /* Enable BARs */ - pci_write_config16(dev, PCI_COMMAND, 0x0007); - - if (config->ide_legacy_combined) { - printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n"); - - /* No AHCI: clear AHCI base */ - pci_write_config32(dev, 0x24, 0x00000000); - /* And without AHCI BAR no memory decoding */ - reg16 = pci_read_config16(dev, PCI_COMMAND); - reg16 &= ~PCI_COMMAND_MEMORY; - pci_write_config16(dev, PCI_COMMAND, reg16); - } else if(config->sata_ahci) { - u32 *abar; - - printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); - - /* Set Interrupt Line */ - /* Interrupt Pin is set by D31IP.PIP */ - pci_write_config8(dev, INTR_LN, 0x0a); - - /* Initialize AHCI memory-mapped space */ - abar = (u32 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5); - printk(BIOS_DEBUG, "ABAR: %p\n", abar); - /* Enable AHCI Mode */ - reg32 = read32(abar + 0x01); - reg32 |= (1 << 31); - write32(abar + 0x01, reg32); - } else { - printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); - - /* Set Interrupt Line */ - /* Interrupt Pin is set by D31IP.PIP */ - pci_write_config8(dev, INTR_LN, 0xff); - } - -} - -static void sata_enable(device_t dev) -{ -} - -static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) -{ - if (!vendor || !device) { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - pci_read_config32(dev, PCI_VENDOR_ID)); - } else { - pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, - ((device & 0xffff) << 16) | (vendor & 0xffff)); - } -} - -static struct pci_operations sata_pci_ops = { - .set_subsystem = sata_set_subsystem, -}; - -static struct device_operations sata_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = sata_init, - .enable = sata_enable, - .scan_bus = 0, - .ops_pci = &sata_pci_ops, -}; - -static const unsigned short pci_device_ids[] = { 0x1c00, 0x1c01, 0x1c02, 0x1c03, - 0x1e00, 0x1e01, 0x1e02, 0x1e03, 0x2323, - 0 }; - -static const struct pci_driver pch_sata __pci_driver = { - .ops = &sata_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .devices = pci_device_ids, -}; diff --git a/src/southbridge/intel/fsp_bd82x6x/smi.c b/src/southbridge/intel/fsp_bd82x6x/smi.c deleted file mode 100644 index 2b4d4ec8fd..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/smi.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_DEBUG, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); - printk(BIOS_DEBUG, "\n"); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i>= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear ALT_GP_SMI_STS - * @return ALT_GP_SMI_STS register - */ -static u16 reset_alt_gp_smi_status(void) -{ - u16 reg16; - - reg16 = inl(pmbase + ALT_GP_SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg16, pmbase + ALT_GP_SMI_STS); - - return reg16; -} - -static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) -{ - int i; - printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); - for (i=15; i>= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i); - } - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - - - -/** - * @brief Set the EOS bit - */ -static void smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -void southbridge_smm_init(void) -{ - u32 smi_en; - u16 pm1_en; - u32 gpe0_en; - -#if CONFIG_ELOG - /* Log events from chipset before clearing */ - pch_log_state(); -#endif - - printk(BIOS_DEBUG, "Initializing southbridge SMI..."); - - pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), - PMBASE) & 0xff80; - - printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); - - smi_en = inl(pmbase + SMI_EN); - if (smi_en & APMC_EN) { - printk(BIOS_INFO, "SMI# handler already enabled?\n"); - return; - } - - printk(BIOS_DEBUG, "\n"); - dump_smi_status(reset_smi_status()); - dump_pm1_status(reset_pm1_status()); - dump_gpe0_status(reset_gpe0_status()); - dump_alt_gp_smi_status(reset_alt_gp_smi_status()); - dump_tco_status(reset_tco_status()); - - /* Disable GPE0 PME_B0 */ - gpe0_en = inl(pmbase + GPE0_EN); - gpe0_en &= ~PME_B0_EN; - outl(gpe0_en, pmbase + GPE0_EN); - - pm1_en = 0; - pm1_en |= PWRBTN_EN; - pm1_en |= GBL_EN; - outw(pm1_en, pmbase + PM1_EN); - - /* Enable SMI generation: - * - on TCO events - * - on APMC writes (io 0xb2) - * - on writes to SLP_EN (sleep states) - * - on writes to GBL_RLS (bios commands) - * No SMIs: - * - on microcontroller writes (io 0x62/0x66) - */ - - smi_en = 0; /* reset SMI enables */ - -#if 0 - smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN; -#endif - smi_en |= TCO_EN; - smi_en |= APMC_EN; -#if DEBUG_PERIODIC_SMIS - /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using - * periodic SMIs. - */ - smi_en |= PERIODIC_EN; -#endif - smi_en |= SLP_SMI_EN; -#if 0 - smi_en |= BIOS_EN; -#endif - - /* The following need to be on for SMIs to happen */ - smi_en |= EOS | GBL_SMI_EN; - - outl(smi_en, pmbase + SMI_EN); -} - -void southbridge_trigger_smi(void) -{ - /** - * There are several methods of raising a controlled SMI# via - * software, among them: - * - Writes to io 0xb2 (APMC) - * - Writes to the Local Apic ICR with Delivery mode SMI. - * - * Using the local apic is a bit more tricky. According to - * AMD Family 11 Processor BKDG no destination shorthand must be - * used. - * The whole SMM initialization is quite a bit hardware specific, so - * I'm not too worried about the better of the methods at the moment - */ - - /* raise an SMI interrupt */ - printk(BIOS_SPEW, " ... raise SMI#\n"); - outb(0x00, 0xb2); -} - -void southbridge_clear_smi_status(void) -{ - /* Clear SMI status */ - reset_smi_status(); - - /* Clear PM1 status */ - reset_pm1_status(); - - /* Set EOS bit so other SMIs can occur. */ - smi_set_eos(); -} - -void smm_setup_structures(void *gnvs, void *tcg, void *smi1) -{ - /* - * Issue SMI to set the gnvs pointer in SMM. - * tcg and smi1 are unused. - * - * EAX = APM_CNT_GNVS_UPDATE - * EBX = gnvs pointer - * EDX = APM_CNT - */ - asm volatile ( - "outb %%al, %%dx\n\t" - : /* ignore result */ - : "a" (APM_CNT_GNVS_UPDATE), - "b" ((u32)gnvs), - "d" (APM_CNT) - ); -} diff --git a/src/southbridge/intel/fsp_bd82x6x/smihandler.c b/src/southbridge/intel/fsp_bd82x6x/smihandler.c deleted file mode 100644 index 96de4570df..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/smihandler.c +++ /dev/null @@ -1,760 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pch.h" - -#include "nvs.h" - -/* We are using PCIe accesses for now - * 1. the chipset can do it - * 2. we don't need to worry about how we leave 0xcf8/0xcfc behind - */ -#include - -/* While we read PMBASE dynamically in case it changed, let's - * initialize it with a sane value - */ -static u16 pmbase = DEFAULT_PMBASE; -u16 smm_get_pmbase(void) -{ - return pmbase; -} - -static u8 smm_initialized = 0; - -/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located - * by coreboot. - */ -static global_nvs_t *gnvs; -global_nvs_t *smm_get_gnvs(void) -{ - return gnvs; -} - -/** - * @brief read and clear PM1_STS - * @return PM1_STS register - */ -static u16 reset_pm1_status(void) -{ - u16 reg16; - - reg16 = inw(pmbase + PM1_STS); - /* set status bits are cleared by writing 1 to them */ - outw(reg16, pmbase + PM1_STS); - - return reg16; -} - -static void dump_pm1_status(u16 pm1_sts) -{ - printk(BIOS_SPEW, "PM1_STS: "); - if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); - if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); - if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); - if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); - if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); - if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); - if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); - printk(BIOS_SPEW, "\n"); - int reg16 = inw(pmbase + PM1_EN); - printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); -} - -/** - * @brief read and clear SMI_STS - * @return SMI_STS register - */ -static u32 reset_smi_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + SMI_STS); - - return reg32; -} - -static void dump_smi_status(u32 smi_sts) -{ - printk(BIOS_DEBUG, "SMI_STS: "); - if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); - if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); - if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); - if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); - if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); - if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); - if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); - if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); - if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); - if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); - if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); - if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); - if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear GPE0_STS - * @return GPE0_STS register - */ -static u32 reset_gpe0_status(void) -{ - u32 reg32; - - reg32 = inl(pmbase + GPE0_STS); - /* set status bits are cleared by writing 1 to them */ - outl(reg32, pmbase + GPE0_STS); - - return reg32; -} - -static void dump_gpe0_status(u32 gpe0_sts) -{ - int i; - printk(BIOS_DEBUG, "GPE0_STS: "); - for (i=31; i >= 16; i--) { - if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); - } - if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); - if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); - if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); - if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); - if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW "); - if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); - if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); - if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); - if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); - if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE "); - if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG "); - if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); - printk(BIOS_DEBUG, "\n"); -} - - -/** - * @brief read and clear TCOx_STS - * @return TCOx_STS registers - */ -static u32 reset_tco_status(void) -{ - u32 tcobase = pmbase + 0x60; - u32 reg32; - - reg32 = inl(tcobase + 0x04); - /* set status bits are cleared by writing 1 to them */ - outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS - if (reg32 & (1 << 18)) - outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS - - return reg32; -} - - -static void dump_tco_status(u32 tco_sts) -{ - printk(BIOS_DEBUG, "TCO_STS: "); - if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); - if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); - if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); - if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); - if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); - if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); - if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); - if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); - if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); - if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); - if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); - if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); - printk(BIOS_DEBUG, "\n"); -} - -int southbridge_io_trap_handler(int smif) -{ - switch (smif) { - case 0x32: - printk(BIOS_DEBUG, "OS Init\n"); - /* gnvs->smif: - * On success, the IO Trap Handler returns 0 - * On failure, the IO Trap Handler returns a value != 0 - */ - gnvs->smif = 0; - return 1; /* IO trap handled */ - } - - /* Not handled */ - return 0; -} - -/** - * @brief Set the EOS bit - */ -void southbridge_smi_set_eos(void) -{ - u8 reg8; - - reg8 = inb(pmbase + SMI_EN); - reg8 |= EOS; - outb(reg8, pmbase + SMI_EN); -} - -static void busmaster_disable_on_bus(int bus) -{ - int slot, func; - unsigned int val; - unsigned char hdr; - - for (slot = 0; slot < 0x20; slot++) { - for (func = 0; func < 8; func++) { - u32 reg32; - device_t dev = PCI_DEV(bus, slot, func); - - val = pci_read_config32(dev, PCI_VENDOR_ID); - - if (val == 0xffffffff || val == 0x00000000 || - val == 0x0000ffff || val == 0xffff0000) - continue; - - /* Disable Bus Mastering for this one device */ - reg32 = pci_read_config32(dev, PCI_COMMAND); - reg32 &= ~PCI_COMMAND_MASTER; - pci_write_config32(dev, PCI_COMMAND, reg32); - - /* If this is a bridge, then follow it. */ - hdr = pci_read_config8(dev, PCI_HEADER_TYPE); - hdr &= 0x7f; - if (hdr == PCI_HEADER_TYPE_BRIDGE || - hdr == PCI_HEADER_TYPE_CARDBUS) { - unsigned int buses; - buses = pci_read_config32(dev, PCI_PRIMARY_BUS); - busmaster_disable_on_bus((buses >> 8) & 0xff); - } - } - } -} - -/* - * Drive GPIO 60 low to gate memory reset in S3. - * - * Intel reference designs all use GPIO 60 but it is - * not a requirement and boards could use a different pin. - */ -static void southbridge_gate_memory_reset(void) -{ - u32 reg32; - u16 gpiobase; - - gpiobase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), GPIOBASE) & 0xfffc; - if (!gpiobase) - return; - - /* Make sure it is set as GPIO */ - reg32 = inl(gpiobase + GPIO_USE_SEL2); - if (!(reg32 & (1 << 28))) { - reg32 |= (1 << 28); - outl(reg32, gpiobase + GPIO_USE_SEL2); - } - - /* Make sure it is set as output */ - reg32 = inl(gpiobase + GP_IO_SEL2); - if (reg32 & (1 << 28)) { - reg32 &= ~(1 << 28); - outl(reg32, gpiobase + GP_IO_SEL2); - } - - /* Drive the output low */ - reg32 = inl(gpiobase + GP_LVL2); - reg32 &= ~(1 << 28); - outl(reg32, gpiobase + GP_LVL2); -} - -static void southbridge_smi_sleep(void) -{ - u8 reg8; - u32 reg32; - u8 slp_typ; - u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - - // save and recover RTC port values - u8 tmp70, tmp72; - tmp70 = inb(0x70); - tmp72 = inb(0x72); - get_option(&s5pwr, "power_on_after_fail"); - outb(tmp70, 0x70); - outb(tmp72, 0x72); - - /* First, disable further SMIs */ - reg8 = inb(pmbase + SMI_EN); - reg8 &= ~SLP_SMI_EN; - outb(reg8, pmbase + SMI_EN); - - /* Figure out SLP_TYP */ - reg32 = inl(pmbase + PM1_CNT); - printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); - slp_typ = (reg32 >> 10) & 7; - - /* Do any mainboard sleep handling */ - mainboard_smi_sleep(slp_typ-2); - -#if CONFIG_ELOG_GSMI - /* Log S3, S4, and S5 entry */ - if (slp_typ >= 5) - elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ-2); -#endif - - /* Next, do the deed. - */ - - switch (slp_typ) { - case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; - case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; - case 5: - printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); - - /* Gate memory reset */ - southbridge_gate_memory_reset(); - - /* Invalidate the cache before going to S3 */ - wbinvd(); - break; - case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; - case 7: - printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); - - outl(0, pmbase + GPE0_EN); - - /* Always set the flag in case CMOS was changed on runtime. For - * "KEEP", switch to "OFF" - KEEP is software emulated - */ - reg8 = pcie_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); - if (s5pwr == MAINBOARD_POWER_ON) { - reg8 &= ~1; - } else { - reg8 |= 1; - } - pcie_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); - - /* also iterates over all bridges on bus 0 */ - busmaster_disable_on_bus(0); - break; - default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; - } - - /* Write back to the SLP register to cause the originally intended - * event again. We need to set BIT13 (SLP_EN) though to make the - * sleep happen. - */ - outl(reg32 | SLP_EN, pmbase + PM1_CNT); - - /* Make sure to stop executing code here for S3/S4/S5 */ - if (slp_typ > 1) - halt(); - - /* In most sleep states, the code flow of this function ends at - * the line above. However, if we entered sleep state S1 and wake - * up again, we will continue to execute code in this function. - */ - reg32 = inl(pmbase + PM1_CNT); - if (reg32 & SCI_EN) { - /* The OS is not an ACPI OS, so we set the state to S0 */ - reg32 &= ~(SLP_EN | SLP_TYP); - outl(reg32, pmbase + PM1_CNT); - } -} - -/* - * Look for Synchronous IO SMI and use save state from that - * core in case we are not running on the same core that - * initiated the IO transaction. - */ -static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd) -{ - em64t101_smm_state_save_area_t *state; - int node; - - /* Check all nodes looking for the one that issued the IO */ - for (node = 0; node < CONFIG_MAX_CPUS; node++) { - state = smm_get_save_state(node); - - /* Check for Synchronous IO (bit0==1) */ - if (!(state->io_misc_info & (1 << 0))) - continue; - - /* Make sure it was a write (bit4==0) */ - if (state->io_misc_info & (1 << 4)) - continue; - - /* Check for APMC IO port */ - if (((state->io_misc_info >> 16) & 0xff) != APM_CNT) - continue; - - /* Check AX against the requested command */ - if ((state->rax & 0xff) != cmd) - continue; - - return state; - } - - return NULL; -} - -#if CONFIG_ELOG_GSMI -static void southbridge_smi_gsmi(void) -{ - u32 *ret, *param; - u8 sub_command; - em64t101_smm_state_save_area_t *io_smi = - smi_apmc_find_state_save(ELOG_GSMI_APM_CNT); - - if (!io_smi) - return; - - /* Command and return value in EAX */ - ret = (u32*)&io_smi->rax; - sub_command = (u8)(*ret >> 8); - - /* Parameter buffer in EBX */ - param = (u32*)&io_smi->rbx; - - /* drivers/elog/gsmi.c */ - *ret = gsmi_exec(sub_command, param); -} -#endif - -static void southbridge_smi_apmc(void) -{ - u32 pmctrl; - u8 reg8; - em64t101_smm_state_save_area_t *state; - - /* Emulate B2 register as the FADT / Linux expects it */ - - reg8 = inb(APM_CNT); - switch (reg8) { - case APM_CNT_CST_CONTROL: - /* Calling this function seems to cause - * some kind of race condition in Linux - * and causes a kernel oops - */ - printk(BIOS_DEBUG, "C-state control\n"); - break; - case APM_CNT_PST_CONTROL: - /* Calling this function seems to cause - * some kind of race condition in Linux - * and causes a kernel oops - */ - printk(BIOS_DEBUG, "P-state control\n"); - break; - case APM_CNT_ACPI_DISABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl &= ~SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); - break; - case APM_CNT_ACPI_ENABLE: - pmctrl = inl(pmbase + PM1_CNT); - pmctrl |= SCI_EN; - outl(pmctrl, pmbase + PM1_CNT); - printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); - break; - case APM_CNT_GNVS_UPDATE: - if (smm_initialized) { - printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); - return; - } - state = smi_apmc_find_state_save(reg8); - if (state) { - /* EBX in the state save contains the GNVS pointer */ - gnvs = (global_nvs_t *)((u32)state->rbx); - smm_initialized = 1; - printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs); - } - break; -#if CONFIG_ELOG_GSMI - case ELOG_GSMI_APM_CNT: - southbridge_smi_gsmi(); - break; -#endif - } - - mainboard_smi_apmc(reg8); -} - -static void southbridge_smi_pm1(void) -{ - u16 pm1_sts; - - pm1_sts = reset_pm1_status(); - dump_pm1_status(pm1_sts); - - /* While OSPM is not active, poweroff immediately - * on a power button event. - */ - if (pm1_sts & PWRBTN_STS) { - // power button pressed - u32 reg32; - reg32 = (7 << 10) | (1 << 13); -#if CONFIG_ELOG_GSMI - elog_add_event(ELOG_TYPE_POWER_BUTTON); -#endif - outl(reg32, pmbase + PM1_CNT); - } -} - -static void southbridge_smi_gpe0(void) -{ - u32 gpe0_sts; - - gpe0_sts = reset_gpe0_status(); - dump_gpe0_status(gpe0_sts); -} - -static void southbridge_smi_gpi(void) -{ - u16 reg16; - reg16 = inw(pmbase + ALT_GP_SMI_STS); - outw(reg16, pmbase + ALT_GP_SMI_STS); - - reg16 &= inw(pmbase + ALT_GP_SMI_EN); - - mainboard_smi_gpi(reg16); - - if (reg16) - printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); - - outw(reg16, pmbase + ALT_GP_SMI_STS); -} - -static void southbridge_smi_mc(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & MCSMI_EN) == 0) - return; - - printk(BIOS_DEBUG, "Microcontroller SMI.\n"); -} - - - -static void southbridge_smi_tco(void) -{ - u32 tco_sts; - - tco_sts = reset_tco_status(); - - /* Any TCO event? */ - if (!tco_sts) - return; - - if (tco_sts & (1 << 8)) { // BIOSWR - u8 bios_cntl; - - bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc); - - if (bios_cntl & 1) { - /* BWE is RW, so the SMI was caused by a - * write to BWE, not by a write to the BIOS - */ - - /* This is the place where we notice someone - * is trying to tinker with the BIOS. We are - * trying to be nice and just ignore it. A more - * resolute answer would be to power down the - * box. - */ - printk(BIOS_DEBUG, "Switching back to RO\n"); - pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); - } /* No else for now? */ - } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ - /* Handle TCO timeout */ - printk(BIOS_DEBUG, "TCO Timeout.\n"); - } else if (!tco_sts) { - dump_tco_status(tco_sts); - } -} - -static void southbridge_smi_periodic(void) -{ - u32 reg32; - - reg32 = inl(pmbase + SMI_EN); - - /* Are periodic SMIs enabled? */ - if ((reg32 & PERIODIC_EN) == 0) - return; - - printk(BIOS_DEBUG, "Periodic SMI.\n"); -} - -static void southbridge_smi_monitor(void) -{ -#define IOTRAP(x) (trap_sts & (1 << x)) - u32 trap_sts, trap_cycle; - u32 data, mask = 0; - int i; - - trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register - RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR - - trap_cycle = RCBA32(0x1e10); - for (i=16; i<20; i++) { - if (trap_cycle & (1 << i)) - mask |= (0xff << ((i - 16) << 2)); - } - - - /* IOTRAP(3) SMI function call */ - if (IOTRAP(3)) { - if (gnvs && gnvs->smif) - io_trap_handler(gnvs->smif); // call function smif - return; - } - - /* IOTRAP(2) currently unused - * IOTRAP(1) currently unused */ - - /* IOTRAP(0) SMIC */ - if (IOTRAP(0)) { - if (!(trap_cycle & (1 << 24))) { // It's a write - printk(BIOS_DEBUG, "SMI1 command\n"); - data = RCBA32(0x1e18); - data &= mask; - // if (smi1) - // southbridge_smi_command(data); - // return; - } - // Fall through to debug - } - - printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); - printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); - printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); - printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); - - if (!(trap_cycle & (1 << 24))) { - /* Write Cycle */ - data = RCBA32(0x1e18); - printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); - } -#undef IOTRAP -} - -typedef void (*smi_handler_t)(void); - -static smi_handler_t southbridge_smi[32] = { - NULL, // [0] reserved - NULL, // [1] reserved - NULL, // [2] BIOS_STS - NULL, // [3] LEGACY_USB_STS - southbridge_smi_sleep, // [4] SLP_SMI_STS - southbridge_smi_apmc, // [5] APM_STS - NULL, // [6] SWSMI_TMR_STS - NULL, // [7] reserved - southbridge_smi_pm1, // [8] PM1_STS - southbridge_smi_gpe0, // [9] GPE0_STS - southbridge_smi_gpi, // [10] GPI_STS - southbridge_smi_mc, // [11] MCSMI_STS - NULL, // [12] DEVMON_STS - southbridge_smi_tco, // [13] TCO_STS - southbridge_smi_periodic, // [14] PERIODIC_STS - NULL, // [15] SERIRQ_SMI_STS - NULL, // [16] SMBUS_SMI_STS - NULL, // [17] LEGACY_USB2_STS - NULL, // [18] INTEL_USB2_STS - NULL, // [19] reserved - NULL, // [20] PCI_EXP_SMI_STS - southbridge_smi_monitor, // [21] MONITOR_STS - NULL, // [22] reserved - NULL, // [23] reserved - NULL, // [24] reserved - NULL, // [25] EL_SMI_STS - NULL, // [26] SPI_STS - NULL, // [27] reserved - NULL, // [28] reserved - NULL, // [29] reserved - NULL, // [30] reserved - NULL // [31] reserved -}; - -/** - * @brief Interrupt handler for SMI# - * - * @param node - * @param state_save - */ - -void southbridge_smi_handler(void) -{ - int i, dump = 0; - u32 smi_sts; - - /* Update global variable pmbase */ - pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc; - - /* We need to clear the SMI status registers, or we won't see what's - * happening in the following calls. - */ - smi_sts = reset_smi_status(); - - /* Call SMI sub handler for each of the status bits */ - for (i = 0; i < 31; i++) { - if (smi_sts & (1 << i)) { - if (southbridge_smi[i]) { - southbridge_smi[i](); - } else { - printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " - "handler available.\n", i); - dump = 1; - } - } - } - - if(dump) { - dump_smi_status(smi_sts); - } - -} diff --git a/src/southbridge/intel/fsp_bd82x6x/southbridge_pci_devs.h b/src/southbridge/intel/fsp_bd82x6x/southbridge_pci_devs.h deleted file mode 100644 index 7e52655866..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/southbridge_pci_devs.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2013 Google Inc. - * Copyright (C) 2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#ifndef _INTEL_FSP_BD82X6X_PCI_DEVS_H_ -#define _INTEL_FSP_BD82X6X_PCI_DEVS_H_ - -#include - -#define BUS0 0 - -/* XHCI */ -#define XHCI_DEV 0x14 -#define XHCI_FUNC 0 -# define XHCI_DEVFN PCI_DEVFN(XHCI_DEV, XHCI_FUNC) - -/* Management Engine Interface */ -#define MEI_DEV 0x16 -#define MEI1_FUNC 0x0 -# define MEI1_DEVFN PCI_DEVFN(MEI_DEV, MEI1_FUNC) - -#define MEI2_FUNC 0x1 -# define MEI2_DEVFN PCI_DEVFN(MEI_DEV, MEI2_FUNC) - -/* MEI - IDE Redirection */ -#define IDE_DEV 0x16 -#define IDE_FUNC 2 -# define IDE_DEVFN PCI_DEVFN(IDE_DEV, IDE_FUNC) - -/* MEI - Keyboard / Text Redirection */ -#define KT_DEV 0x16 -#define KT_FUNC 0x3 -#define KT_DEVFN PCI_DEVFN(KT_DEV, KT_FUNC) - -/* Gigabit Ethernet */ -#define GBE_DEV 0x19 -#define GBE_FUNC 0x0 -#define GBE_DEVFN PCI_DEVFN(GBE_DEV, GBE_FUNC) - -/* EHCI */ -#define EHCI1_DEV 0x1D -#define EHCI1_FUNC 0 -# define EHCI1_DEVFN PCI_DEVFN(EHCI1_DEV, EHCI1_FUNC) - -#define EHCI2_DEV 0x1A -#define EHCI2_FUNC 0 -# define EHCI2_DEVFN PCI_DEVFN(EHCI2_DEV, EHCI2_FUNC) - -/* HD Audio */ -#define HDA_DEV 0x1B -#define HDA_FUNC 0 -# define HDA_DEVFN PCI_DEVFN(HDA_DEV, HDA_FUNC) - -/* PCIe Ports */ -#define SB_PCIE_DEV 0x1C -#define SB_PCIE_PORT1_FUNC 0 -# define SB_PCIE_PORT1_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT1_FUNC) - -#define SB_PCIE_PORT2_FUNC 1 -# define SB_PCIE_PORT2_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT2_FUNC) - -#define SB_PCIE_PORT3_FUNC 2 -# define SB_PCIE_PORT3_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT3_FUNC) - -#define SB_PCIE_PORT4_FUNC 3 -# define SB_PCIE_PORT4_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT4_FUNC) - -#define SB_PCIE_PORT5_FUNC 4 -# define SB_PCIE_PORT5_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT5_FUNC) - -#define SB_PCIE_PORT6_FUNC 5 -# define SB_PCIE_PORT6_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT6_FUNC) - -#define SB_PCIE_PORT7_FUNC 6 -# define SB_PCIE_PORT7_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT7_FUNC) - -#define SB_PCIE_PORT8_FUNC 7 -# define SB_PCIE_PORT8_DEVFN PCI_DEVFN(SB_PCIE_DEV, SB_PCIE_PORT8_FUNC) - -/* PCI Bridge */ -#define SB_PCI_DEV 0x1E -#define SB_PCI_PORT_FUNC 0 -# define SB_PCI_PORT_DEVFN PCI_DEVFN(SB_PCI_PORT_DEV, SB_PCI_PORT_FUNC) - -/* Platform Controller Hub */ -#define PCH_DEV 0x1F - -/* LPC */ -#define LPC_DEV PCH_DEV -#define LPC_FUNC 0 -# define LPC_DEVFN PCI_DEVFN(LPC_DEV, LPC_FUNC) - -/* SMBUS */ -#define SMBUS_DEV PCH_DEV -#define SMBUS_FUNC 3 -# define SMBUS_DEVFN PCI_DEVFN(SMBUS_DEV, SMBUS_FUNC) - -/* SATA */ -#define SATA_DEV PCH_DEV -#define SATA1_FUNC 2 -# define SATA1_DEVFN PCI_DEVFN(SATA_DEV, SATA1_FUNC) - -#define SATA2_FUNC 5 -# define SATA2_DEVFN PCI_DEVFN(SATA_DEV, SATA2_FUNC) - -/* Thermal Sensor */ -#define TS_DEV PCH_DEV -#define TS_FUNC 6 -# define TS_DEVFN PCI_DEVFN(TS_DEV, TS_FUNC) - -#endif /* _INTEL_FSP_BD82X6X_PCI_DEVS_H_ */ diff --git a/src/southbridge/intel/fsp_bd82x6x/watchdog.c b/src/southbridge/intel/fsp_bd82x6x/watchdog.c deleted file mode 100644 index 91bc615003..0000000000 --- a/src/southbridge/intel/fsp_bd82x6x/watchdog.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2011 Google Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc. - */ - -#include -#include -#include -#include -#include - - // - // Disable PCH Watchdog timer at SB_RCBA+0x3410 - // - // Mmio32((MmPci32(0, 0, 0x1F, 0, 0xF0) & ~BIT0), 0x3410) |= 0x20; - // -void watchdog_off(void) -{ - device_t dev; - unsigned long value, base; - - /* Turn off the ICH7 watchdog. */ - dev = dev_find_slot(0, PCI_DEVFN(0x1f, 0)); - - /* Enable I/O space. */ - value = pci_read_config16(dev, 0x04); - value |= (1 << 10); - pci_write_config16(dev, 0x04, value); - - /* Get TCO base. */ - base = (pci_read_config32(dev, 0x40) & 0x0fffe) + 0x60; - - /* Disable the watchdog timer. */ - value = inw(base + 0x08); - value |= 1 << 11; - outw(value, base + 0x08); - - /* Clear TCO timeout status. */ - outw(0x0008, base + 0x04); - outw(0x0002, base + 0x06); - - printk(BIOS_DEBUG, "PCH watchdog disabled\n"); -} diff --git a/src/vendorcode/intel/Kconfig b/src/vendorcode/intel/Kconfig index 754c48716c..580089f397 100644 --- a/src/vendorcode/intel/Kconfig +++ b/src/vendorcode/intel/Kconfig @@ -19,7 +19,6 @@ config FSP_VENDORCODE_HEADER_PATH string - default "fsp1_0/ivybridge_bd82x6x" if CPU_INTEL_FSP_MODEL_306AX && SOUTHBRIDGE_INTEL_FSP_BD82X6X default "fsp1_0/baytrail" if SOC_INTEL_FSP_BAYTRAIL default "fsp1_0/rangeley" if CPU_INTEL_FSP_MODEL_406DX diff --git a/util/board_status/to-wiki/towiki.sh b/util/board_status/to-wiki/towiki.sh index c1d2394a63..6aea58aba3 100755 --- a/util/board_status/to-wiki/towiki.sh +++ b/util/board_status/to-wiki/towiki.sh @@ -326,7 +326,7 @@ EOF case $northbridge in INTEL_HASWELL) cpu_nice="Intel® 4th Gen (Haswell) Core i3/i5/i7";; - INTEL_IVYBRIDGE|INTEL_IVYBRIDGE_MRC|INTEL_FSP_IVYBRIDGE) + INTEL_IVYBRIDGE|INTEL_IVYBRIDGE_MRC) cpu_nice="Intel® 3rd Gen (Ivybridge) Core i3/i5/i7";; INTEL_SANDYBRIDGE|INTEL_SANDYBRIDGE_MRC) cpu_nice="Intel® 2nd Gen (Sandybridge) Core i3/i5/i7";; -- cgit v1.2.3