From e94f86571c0d327b67ab290e9f01f59a5561c29a Mon Sep 17 00:00:00 2001 From: Jes Klinke Date: Fri, 30 Oct 2020 13:46:39 -0700 Subject: mb/google/volteer: Skip TPM detection except on SPI Production Volteer devices have Cr50 TPM connected via SPI, depending on Cr50 firmware version it may or may not support long enough interrupt pulses for the SoC to safely be able to enable lowest power mode. Some reworked Volteer devices have had the Cr50 (Haven) TPM replaced with Dauntless, communicating via I2C. The I2C drivers do not support being accessed early in ramstage, before chip init and memory mapping, (tlcl_lib_init() will halt with an error finding the I2C controller base address.) Since the Dauntless device under development can be made to support longer interrupts, or a completely new interrupt signalling mode, there is no need to try to go through the same discovery as is done via SPI. This CL will skip the discovery, enabling the S0i3.4 sleep mode in all cases, on the reworked test devices. BUG=b:169526865, b:172509545 TEST=abuild -t GOOGLE_VOLTEER2 -c max -x Change-Id: I08a533cede30a3c0ab943938961dc7e4b572d4ce Signed-off-by: Jes Bodi Klinke Reviewed-on: https://review.coreboot.org/c/coreboot/+/47049 Reviewed-by: Furquan Shaikh Reviewed-by: Angel Pons Tested-by: build bot (Jenkins) --- src/mainboard/google/volteer/mainboard.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/src/mainboard/google/volteer/mainboard.c b/src/mainboard/google/volteer/mainboard.c index acba9722dc..0850e745db 100644 --- a/src/mainboard/google/volteer/mainboard.c +++ b/src/mainboard/google/volteer/mainboard.c @@ -96,13 +96,23 @@ static void mainboard_enable(struct device *dev) void mainboard_update_soc_chip_config(struct soc_intel_tigerlake_config *cfg) { int ret; + if (!CONFIG(MAINBOARD_HAS_SPI_TPM_CR50)) { + /* + * Negotiation of long interrupt pulses is only supported via SPI. I2C is only + * used on reworked prototypes on which the TPM is replaced with Dauntless under + * development, it will use long pulses by default, or use the interrupt line in + * a different way altogether. + */ + return; + } + ret = tlcl_lib_init(); if (ret != VB2_SUCCESS) { printk(BIOS_ERR, "tlcl_lib_init() failed: 0x%x\n", ret); return; } - if (CONFIG(MAINBOARD_HAS_SPI_TPM_CR50) && cr50_is_long_interrupt_pulse_enabled()) { + if (cr50_is_long_interrupt_pulse_enabled()) { printk(BIOS_INFO, "Enabling S0i3.4\n"); } else { /* -- cgit v1.2.3