From e614353194c712a40aa8444a530b2062876eabe3 Mon Sep 17 00:00:00 2001 From: Kyösti Mälkki Date: Tue, 26 Feb 2013 17:24:41 +0200 Subject: Unify setting 82801a/b/c/d IOAPIC ID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove obscure local copy of writing the ioapic registers. Change-Id: I133e710639ff57c6a0ac925e30efce2ebc43b856 Signed-off-by: Kyösti Mälkki Reviewed-on: http://review.coreboot.org/2532 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer --- src/southbridge/intel/i82801ax/Kconfig | 1 + src/southbridge/intel/i82801ax/lpc.c | 39 ++++++++++++++------------ src/southbridge/intel/i82801bx/Kconfig | 1 + src/southbridge/intel/i82801bx/lpc.c | 39 ++++++++++++++------------ src/southbridge/intel/i82801cx/Kconfig | 2 +- src/southbridge/intel/i82801cx/lpc.c | 44 ++++++++++++----------------- src/southbridge/intel/i82801dx/i82801dx.h | 1 + src/southbridge/intel/i82801dx/lpc.c | 46 ++++++++++++++++--------------- 8 files changed, 87 insertions(+), 86 deletions(-) diff --git a/src/southbridge/intel/i82801ax/Kconfig b/src/southbridge/intel/i82801ax/Kconfig index 70734a7a15..71ae0163c2 100644 --- a/src/southbridge/intel/i82801ax/Kconfig +++ b/src/southbridge/intel/i82801ax/Kconfig @@ -19,6 +19,7 @@ config SOUTHBRIDGE_INTEL_I82801AX bool + select IOAPIC select HAVE_HARD_RESET select USE_WATCHDOG_ON_BOOT diff --git a/src/southbridge/intel/i82801ax/lpc.c b/src/southbridge/intel/i82801ax/lpc.c index c9404ed3c0..1d296f414d 100644 --- a/src/southbridge/intel/i82801ax/lpc.c +++ b/src/southbridge/intel/i82801ax/lpc.c @@ -70,17 +70,30 @@ typedef struct southbridge_intel_i82801ax_config config_t; * Use the defined IRQ values above or set mainboard * specific IRQ values in your devicetree.cb. */ -static void i82801ax_enable_apic(struct device *dev) -{ - u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)IO_APIC_ADDR; - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); + +/** + * Enable ACPI I/O range. + * + * @param dev PCI device with ACPI and PM BAR's + */ +static void i82801ax_enable_acpi(struct device *dev) +{ /* Set ACPI base address (I/O space). */ pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); /* Enable ACPI I/O range decode and ACPI power management. */ pci_write_config8(dev, ACPI_CNTL, ACPI_EN); +} + +/** + * Set miscellanous static southbridge features. + * + * @param dev PCI device with I/O APIC control registers + */ +static void i82801ax_enable_ioapic(struct device *dev) +{ + u32 reg32; reg32 = pci_read_config32(dev, GEN_CNTL); reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ @@ -90,18 +103,7 @@ static void i82801ax_enable_apic(struct device *dev) pci_write_config32(dev, GEN_CNTL, reg32); printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - /* TODO: From i82801ca, needed/useful on other ICH? */ - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ + set_ioapic_id(IO_APIC_ADDR, 0x02); } static void i82801ax_enable_serial_irqs(struct device *dev) @@ -219,8 +221,9 @@ static void lpc_init(struct device *dev) /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); + i82801ax_enable_acpi(dev); /* IO APIC initialization. */ - i82801ax_enable_apic(dev); + i82801ax_enable_ioapic(dev); i82801ax_enable_serial_irqs(dev); diff --git a/src/southbridge/intel/i82801bx/Kconfig b/src/southbridge/intel/i82801bx/Kconfig index 00cb5bfa90..3d725d473c 100644 --- a/src/southbridge/intel/i82801bx/Kconfig +++ b/src/southbridge/intel/i82801bx/Kconfig @@ -19,6 +19,7 @@ config SOUTHBRIDGE_INTEL_I82801BX bool + select IOAPIC select HAVE_HARD_RESET select USE_WATCHDOG_ON_BOOT diff --git a/src/southbridge/intel/i82801bx/lpc.c b/src/southbridge/intel/i82801bx/lpc.c index 0ff44e6054..0533afbdae 100644 --- a/src/southbridge/intel/i82801bx/lpc.c +++ b/src/southbridge/intel/i82801bx/lpc.c @@ -72,17 +72,29 @@ typedef struct southbridge_intel_i82801bx_config config_t; * Use the defined IRQ values above or set mainboard * specific IRQ values in your devicetree.cb. */ -static void i82801bx_enable_apic(struct device *dev) -{ - uint32_t reg32; - volatile uint32_t *ioapic_index = (volatile uint32_t *)IO_APIC_ADDR; - volatile uint32_t *ioapic_data = (volatile uint32_t *)(IO_APIC_ADDR + 0x10); +/** + * Enable ACPI I/O range. + * + * @param dev PCI device with ACPI and PM BAR's + */ +static void i82801bx_enable_acpi(struct device *dev) +{ /* Set ACPI base address (I/O space). */ pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); /* Enable ACPI I/O range decode and ACPI power management. */ pci_write_config8(dev, ACPI_CNTL, ACPI_EN); +} + +/** + * Set miscellanous static southbridge features. + * + * @param dev PCI device with I/O APIC control registers + */ +static void i82801bx_enable_ioapic(struct device *dev) +{ + u32 reg32; reg32 = pci_read_config32(dev, GEN_CNTL); reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ @@ -92,18 +104,7 @@ static void i82801bx_enable_apic(struct device *dev) pci_write_config32(dev, GEN_CNTL, reg32); printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - /* TODO: From i82801ca, needed/useful on other ICH? */ - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ + set_ioapic_id(IO_APIC_ADDR, 0x02); } static void i82801bx_enable_serial_irqs(struct device *dev) @@ -237,8 +238,10 @@ static void lpc_init(struct device *dev) /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); + i82801bx_enable_acpi(dev); + /* IO APIC initialization. */ - i82801bx_enable_apic(dev); + i82801bx_enable_ioapic(dev); i82801bx_enable_serial_irqs(dev); diff --git a/src/southbridge/intel/i82801cx/Kconfig b/src/southbridge/intel/i82801cx/Kconfig index 17e90e83a3..3e01cb81c7 100644 --- a/src/southbridge/intel/i82801cx/Kconfig +++ b/src/southbridge/intel/i82801cx/Kconfig @@ -1,4 +1,4 @@ config SOUTHBRIDGE_INTEL_I82801CX bool + select IOAPIC select HAVE_HARD_RESET - diff --git a/src/southbridge/intel/i82801cx/lpc.c b/src/southbridge/intel/i82801cx/lpc.c index a1ffb8f540..79998bc722 100644 --- a/src/southbridge/intel/i82801cx/lpc.c +++ b/src/southbridge/intel/i82801cx/lpc.c @@ -24,34 +24,24 @@ #define MAINBOARD_POWER_ON 1 -static void i82801cx_enable_ioapic( struct device *dev) +/** + * Set miscellanous static southbridge features. + * + * @param dev PCI device with I/O APIC control registers + */ +static void i82801cx_enable_ioapic(struct device *dev) { - uint32_t dword; - volatile uint32_t* ioapic_index = (volatile uint32_t*)IO_APIC_ADDR; - volatile uint32_t* ioapic_data = (volatile uint32_t*)(IO_APIC_ADDR + 0x10); - - dword = pci_read_config32(dev, GEN_CNTL); - dword |= (3 << 7); /* enable ioapic & disable SMBus interrupts */ - dword |= (1 <<13); /* coprocessor error enable */ - dword |= (1 << 1); /* delay transaction enable */ - dword |= (1 << 2); /* DMA collection buf enable */ - pci_write_config32(dev, GEN_CNTL, dword); - printk(BIOS_DEBUG, "ioapic southbridge enabled %x\n",dword); - - // Must program the APIC's ID before using it - - *ioapic_index = 0; // Select APIC ID register - *ioapic_data = (2<<24); - - // Hang if the ID didn't take (chip not present?) - *ioapic_index = 0; - dword = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge apic id = %x\n", (dword>>24) & 0xF); - if(dword != (2<<24)) - die(""); - - *ioapic_index = 3; // Select Boot Configuration register - *ioapic_data = 1; // Use Processor System Bus to deliver interrupts + u32 reg32; + + reg32 = pci_read_config32(dev, GEN_CNTL); + reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ + reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */ + reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */ + reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */ + pci_write_config32(dev, GEN_CNTL, reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); + + set_ioapic_id(IO_APIC_ADDR, 0x02); } // This is how interrupts are received from the Super I/O chip diff --git a/src/southbridge/intel/i82801dx/i82801dx.h b/src/southbridge/intel/i82801dx/i82801dx.h index d9e4d3809d..2da77591f5 100644 --- a/src/southbridge/intel/i82801dx/i82801dx.h +++ b/src/southbridge/intel/i82801dx/i82801dx.h @@ -82,6 +82,7 @@ int smbus_read_byte(unsigned device, unsigned address); #define PMBASE_ADDR 0x0400 #define DEFAULT_PMBASE PMBASE_ADDR #define ACPI_CNTL 0x44 +#define ACPI_EN (1 << 4) #define BIOS_CNTL 0x4E #define GPIO_BASE 0x58 #define GPIO_CNTL 0x5C diff --git a/src/southbridge/intel/i82801dx/lpc.c b/src/southbridge/intel/i82801dx/lpc.c index fbf8e12228..0644569c71 100644 --- a/src/southbridge/intel/i82801dx/lpc.c +++ b/src/southbridge/intel/i82801dx/lpc.c @@ -36,37 +36,38 @@ typedef struct southbridge_intel_i82801dx_config config_t; -static void i82801dx_enable_ioapic(struct device *dev) +/** + * Enable ACPI I/O range. + * + * @param dev PCI device with ACPI and PM BAR's + */ +static void i82801dx_enable_acpi(struct device *dev) { - u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); - /* Set ACPI base address (I/O space). */ pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); - /* Enable ACPI I/O and power management. */ - pci_write_config8(dev, ACPI_CNTL, 0x10); + /* Enable ACPI I/O range decode and ACPI power management. */ + pci_write_config8(dev, ACPI_CNTL, ACPI_EN); +} + +/** + * Set miscellanous static southbridge features. + * + * @param dev PCI device with I/O APIC control registers + */ +static void i82801dx_enable_ioapic(struct device *dev) +{ + u32 reg32; reg32 = pci_read_config32(dev, GEN_CNTL); - reg32 |= (3 << 7); /* Enable IOAPIC */ - reg32 |= (1 << 13); /* Coprocessor error enable */ - reg32 |= (1 << 1); /* Delayed transaction enable */ - reg32 |= (1 << 2); /* DMA collection buffer enable */ + reg32 |= (1 << 13); /* Coprocessor error enable (COPR_ERR_EN) */ + reg32 |= (3 << 7); /* IOAPIC enable (APIC_EN) */ + reg32 |= (1 << 2); /* DMA collection buffer enable (DCB_EN) */ + reg32 |= (1 << 1); /* Delayed transaction enable (DTE) */ pci_write_config32(dev, GEN_CNTL, reg32); printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ + set_ioapic_id(IO_APIC_ADDR, 0x02); } static void i82801dx_enable_serial_irqs(struct device *dev) @@ -267,6 +268,7 @@ static void lpc_init(struct device *dev) /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); + i82801dx_enable_acpi(dev); /* IO APIC initialization. */ i82801dx_enable_ioapic(dev); -- cgit v1.2.3