From da4ce6b45157060447cb02fa15349f7de3f531ff Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Tue, 22 Apr 2008 22:11:31 +0000 Subject: Add early MSR and PCI register initialization. This fixes many default setting as well as erratas. Some CPU core functions were moved from the HT init and platform specific code to the generic Fam10 CPU code. Signed-off-by: Marc Jones Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3248 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/cpu/amd/model_10xxx/init_cpus.c | 438 ++++++++++++++++++++- .../serengeti_cheetah_fam10/cache_as_ram_auto.c | 58 +-- src/northbridge/amd/amdfam10/raminit_amdmct.c | 39 +- src/northbridge/amd/amdht/AsPsDefs.h | 10 +- src/northbridge/amd/amdht/ht_wrapper.c | 23 +- src/northbridge/amd/amdmct/amddefs.h | 84 +++- 6 files changed, 540 insertions(+), 112 deletions(-) diff --git a/src/cpu/amd/model_10xxx/init_cpus.c b/src/cpu/amd/model_10xxx/init_cpus.c index 819f9b1666..5c17a9a118 100644 --- a/src/cpu/amd/model_10xxx/init_cpus.c +++ b/src/cpu/amd/model_10xxx/init_cpus.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,6 +17,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include "defaults.h" //it takes the ENABLE_APIC_EXT_ID and APIC_ID_OFFSET and LIFT_BSP_APIC_ID #ifndef FAM10_SET_FIDVID @@ -29,7 +30,6 @@ #define FAM10_SET_FIDVID_CORE0_ONLY 0 #endif - static inline void print_initcpu8 (const char *strval, u8 val) { printk_debug("%s%02x\n", strval, val); @@ -55,6 +55,7 @@ static inline void print_initcpu(const char *strval, u32 val) static void prep_fid_change(void); static void init_fidvid_stage2(u32 apicid, u32 nodeid); +void cpuSetAMDMSR(void); #if PCI_IO_CFG_EXT == 1 static inline void set_EnableCf8ExtCfg(void) @@ -261,12 +262,6 @@ static void wait_ap_started(u32 ap_apicid, void *gp ) } -static void wait_all_aps_started(u32 bsp_apicid) -{ - for_each_ap(bsp_apicid, 0 , wait_ap_started, (void *)0); -} - - static void wait_all_other_cores_started(u32 bsp_apicid) { // all aps other than core0 @@ -287,6 +282,15 @@ static void allow_all_aps_stop(u32 bsp_apicid) lapic_write(LAPIC_MSG_REG, (bsp_apicid << 24) | 0x14); } +static void enable_apic_ext_id(u32 node) +{ + u32 val; + + val = pci_read_config32(NODE_HT(node), 0x68); + val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST); + pci_write_config32(NODE_HT(node), 0x68, val); +} + static void STOP_CAR_AND_CPU() { @@ -383,6 +387,13 @@ static u32 init_cpus(u32 cpu_init_detectedx) if(apicid != bsp_apicid) { + /* Setup each AP's cores MSRs. + * This happens after HTinit. + * The BSP runs this code in it's own path. + */ + cpuSetAMDMSR(); + + #if FAM10_SET_FIDVID == 1 #if (CONFIG_LOGICAL_CPUS == 1) && (FAM10_SET_FIDVID_CORE0_ONLY == 1) // Run on all AP for proper FID/VID setup. @@ -512,13 +523,415 @@ static void setup_remote_node(u8 node) } printk_debug(" done\n"); } -#endif +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */ + +void AMD_Errata281(u8 node, u32 revision, u32 platform) +{ + /* Workaround for Transaction Scheduling Conflict in + * Northbridge Cross Bar. Implement XCS Token adjustment + * for ganged links. Also, perform fix up for the mixed + * revision case. + */ + + u32 reg, val; + u8 i; + u8 mixed = 0; + u8 nodes = get_nodes(); + + if (platform & AMD_PTYPE_SVR) { + /* For each node we need to check for a "broken" node */ + if (!(revision & (AMD_DR_B0 | AMD_DR_B1))) { + for (i = 0; i < nodes; i++) { + if (mctGetLogicalCPUID(i) & (AMD_DR_B0 | AMD_DR_B1)) { + mixed = 1; + break; + } + } + } + + if ((revision & (AMD_DR_B0 | AMD_DR_B1)) || mixed) { + + /* F0X68[22:21] DsNpReqLmt0 = 01b */ + val = pci_read_config32(NODE_PCI(node, 0), 0x68); + val &= ~0x00600000; + val |= 0x00200000; + pci_write_config32(NODE_PCI(node, 0), 0x68, val); + + /* F3X6C */ + val = pci_read_config32(NODE_PCI(node, 3), 0x6C); + val &= ~0x700780F7; + val |= 0x00010094; + pci_write_config32(NODE_PCI(node, 3), 0x6C, val); + + /* F3X7C */ + val = pci_read_config32(NODE_PCI(node, 3), 0x7C); + val &= ~0x707FFF1F; + val |= 0x00144514; + pci_write_config32(NODE_PCI(node, 3), 0x7C, val); + + /* F3X144[3:0] RspTok = 0001b */ + val = pci_read_config32(NODE_PCI(node, 3), 0x144); + val &= ~0x0000000F; + val |= 0x00000001; + pci_write_config32(NODE_PCI(node, 3), 0x144, val); + + for (i = 0; i < 3; i++) { + reg = 0x148 + (i * 4); + val = pci_read_config32(NODE_PCI(node, 3), reg); + val &= ~0x000000FF; + val |= 0x000000DB; + pci_write_config32(NODE_PCI(node, 3), reg, val); + } + } + } +} + + +void AMD_Errata298(void) +{ + /* Workaround for L2 Eviction May Occur during operation to + * set Accessed or dirty bit. + */ + + msr_t msr; + u8 i; + u8 affectedRev = 0; + u8 nodes = get_nodes(); + + /* For each core we need to check for a "broken" node */ + for (i = 0; i < nodes; i++) { + if (mctGetLogicalCPUID(i) & (AMD_DR_B0 | AMD_DR_B1 | AMD_DR_B2)) { + affectedRev = 1; + break; + } + } + + if (affectedRev) { + msr = rdmsr(HWCR); + msr.lo |= 0x08; /* Set TlbCacheDis bit[3] */ + wrmsr(HWCR, msr); + + msr = rdmsr(BU_CFG); + msr.lo |= 0x02; /* Set TlbForceMemTypeUc bit[1] */ + wrmsr(BU_CFG, msr); + + msr = rdmsr(OSVW_ID_Length); + msr.lo |= 0x01; /* OS Visible Workaround - MSR */ + wrmsr(OSVW_ID_Length, msr); + + msr = rdmsr(OSVW_Status); + msr.lo |= 0x01; /* OS Visible Workaround - MSR */ + wrmsr(OSVW_Status, msr); + } + + if (!affectedRev && (mctGetLogicalCPUID(0xFF) & AMD_DR_B3)) { + msr = rdmsr(OSVW_ID_Length); + msr.lo |= 0x01; /* OS Visible Workaround - MSR */ + wrmsr(OSVW_ID_Length, msr); + + } +} + + +u32 get_platform_type(void) +{ + u32 ret = 0; + + switch(SYSTEM_TYPE) { + case 1: + ret |= AMD_PTYPE_DSK; + break; + case 2: + ret |= AMD_PTYPE_MOB; + break; + case 0: + ret |= AMD_PTYPE_SVR; + break; + default: + break; + } + + /* FIXME: add UMA support. */ + + /* All Fam10 are multi core */ + ret |= AMD_PTYPE_MC; + + return ret; +} + + +/** + * AMD_CpuFindCapability - Traverse PCI capability list to find host HT links. + * HT Phy operations are not valid on links that aren't present, so this + * prevents invalid accesses. + * + * Returns the offset of the link register. + */ +BOOL AMD_CpuFindCapability (u8 node, u8 cap_count, u8 *offset) +{ + u32 val; + + /* get start of CPU HT Host Capabilities */ + val = pci_read_config32(NODE_PCI(node, 0), 0x34); + val &= 0xFF; + + cap_count++; + + /* Traverse through the capabilities. */ + do { + val = pci_read_config32(NODE_PCI(node, 0), val); + /* Is the capability block a HyperTransport capability block? */ + if ((val & 0xFF) == 0x08) + /* Is the HT capability block an HT Host Capability? */ + if ((val & 0xE0000000) == (1 << 29)) + cap_count--; + val = (val >> 8) & 0xFF; + } while (cap_count && val); + + *offset = (u8) val; + + /* If requested capability found val != 0 */ + if (!cap_count) + return TRUE; + else + return FALSE; +} + + +/** + * AMD_checkLinkType - Compare desired link characteristics using a logical + * link type mask. + * + * Returns the link characteristic mask. + */ +u32 AMD_checkLinkType (u8 node, u8 link, u8 regoff) +{ + u32 val; + u32 linktype; + + /* Check coherency */ + val = pci_read_config32(NODE_PCI(node, 0), regoff + 0x18); + val &= 0x1F; + + if (val == 3) + linktype |= HTPHY_LINKTYPE_COHERENT; + + if (val == 7) + linktype |= HTPHY_LINKTYPE_NONCOHERENT; + + /* Check gen3 */ + val = pci_read_config32(NODE_PCI(node, 0), regoff + 0x08); + + if (((val >> 8) & 0x0F) > 6) + linktype |= HTPHY_LINKTYPE_HT3; + else + linktype |= HTPHY_LINKTYPE_HT1; + + + /* Check ganged */ + val = pci_read_config32(NODE_PCI(node, 0), (link << 2) + 0x170); + + if ( val & 1) + linktype |= HTPHY_LINKTYPE_GANGED; + else + linktype |= HTPHY_LINKTYPE_UNGANGED; + + return linktype; +} + + +/** + * AMD_SetHtPhyRegister - Use the HT link's HT Phy portal registers to update + * a phy setting for that link. + */ +void AMD_SetHtPhyRegister (u8 node, u8 link, u8 entry) +{ + u32 phyReg; + u32 phyBase; + u32 val; + + /* Determine this link's portal */ + if (link > 3) + link -= 4; + + phyBase = ((u32)link << 3) | 0x180; + + + /* Get the portal control register's initial value + * and update it to access the desired phy register + */ + phyReg = pci_read_config32(NODE_PCI(node, 4), phyBase); + + if (fam10_htphy_default[entry].htreg > 0x1FF) { + phyReg &= ~HTPHY_DIRECT_OFFSET_MASK; + phyReg |= HTPHY_DIRECT_MAP; + } else { + phyReg &= ~HTPHY_OFFSET_MASK; + } + + /* Now get the current phy register data + * LinkPhyDone = 0, LinkPhyWrite = 0 is a read + */ + phyReg |= fam10_htphy_default[entry].htreg; + pci_write_config32(NODE_PCI(node, 4), phyBase, phyReg); + + do { + val = pci_read_config32(NODE_PCI(node, 4), phyBase); + } while (!(val & HTPHY_IS_COMPLETE_MASK)); + + /* Now we have the phy register data, apply the change */ + val = pci_read_config32(NODE_PCI(node, 4), phyBase + 4); + val &= ~fam10_htphy_default[entry].mask; + val |= fam10_htphy_default[entry].data; + pci_write_config32(NODE_PCI(node, 4), phyBase + 4, val); + + /* write it through the portal to the phy + * LinkPhyDone = 0, LinkPhyWrite = 1 is a write + */ + phyReg |= HTPHY_WRITE_CMD; + pci_write_config32(NODE_PCI(node, 4), phyBase, phyReg); + + do { + val = pci_read_config32(NODE_PCI(node, 4), phyBase); + } while (!(val & HTPHY_IS_COMPLETE_MASK)); +} + + +void cpuSetAMDMSR(void) +{ + /* This routine loads the CPU with default settings in fam10_msr_default + * table . It must be run after Cache-As-RAM has been enabled, and + * Hypertransport initialization has taken place. Also note + * that it is run on the current processor only, and only for the current + * processor core. + */ + msr_t msr; + u8 i; + u32 revision, platform; + + printk_debug("cpuSetAMDMSR "); + + revision = mctGetLogicalCPUID(0xFF); + platform = get_platform_type(); + + for(i = 0; i < sizeof(fam10_msr_default)/sizeof(fam10_msr_default[0]); i++) { + if ((fam10_msr_default[i].revision & revision) && + (fam10_msr_default[i].platform & platform)) { + msr = rdmsr(fam10_msr_default[i].msr); + msr.hi &= ~fam10_msr_default[i].mask_hi; + msr.hi |= fam10_msr_default[i].data_hi; + msr.lo &= ~fam10_msr_default[i].mask_lo; + msr.lo |= fam10_msr_default[i].data_lo; + wrmsr(fam10_msr_default[i].msr, msr); + } + } + AMD_Errata298(); + + printk_debug(" done\n"); +} + + +void cpuSetAMDPCI(u8 node) +{ + /* This routine loads the CPU with default settings in fam10_pci_default + * table . It must be run after Cache-As-RAM has been enabled, and + * Hypertransport initialization has taken place. Also note + * that it is run for the first core on each node + */ + u8 i, j; + u32 revision, platform; + u32 val; + u8 offset; + + printk_debug("cpuSetAMDPCI %02d", node); + + revision = mctGetLogicalCPUID(node); + platform = get_platform_type(); + + for(i = 0; i < sizeof(fam10_pci_default)/sizeof(fam10_pci_default[0]); i++) { + if ((fam10_pci_default[i].revision & revision) && + (fam10_pci_default[i].platform & platform)) { + val = pci_read_config32(NODE_PCI(node, + fam10_pci_default[i].function), + fam10_pci_default[i].offset); + val &= ~fam10_pci_default[i].mask; + val |= fam10_pci_default[i].data; + pci_write_config32(NODE_PCI(node, + fam10_pci_default[i].function), + fam10_pci_default[i].offset, val); + } + } + + for(i = 0; i < sizeof(fam10_htphy_default)/sizeof(fam10_htphy_default[0]); i++) { + if ((fam10_htphy_default[i].revision & revision) && + (fam10_htphy_default[i].platform & platform)) { + /* HT Phy settings either apply to both sublinks or have + * separate registers for sublink zero and one, so there + * will be two table entries. So, here we only loop + cd t * through the sublink zeros in function zero. + */ + for (j = 0; j < 4; j++) { + if (AMD_CpuFindCapability(node, j, &offset)) { + if (AMD_checkLinkType(node, j, offset) + & fam10_htphy_default[i].linktype) { + AMD_SetHtPhyRegister(node, j, i); + } + } else { + /* No more capabilities, + * link not present + */ + break; + } + } + } + } + + /* FIXME: add UMA support and programXbarToSriReg(); */ + + AMD_Errata281(node, revision, platform); + + /* FIXME: if the dct phy doesn't init correct it needs to reset. + if (revision & (AMD_DR_B2 | AMD_DR_B3)) + dctPhyDiag(); */ + + printk_debug(" done\n"); +} + + +void cpuInitializeMCA(void) +{ + /* Clears Machine Check Architecture (MCA) registers, which power on + * containing unknown data, on currently running processor. + * This routine should only be executed on initial power on (cold boot), + * not across a warm reset because valid data is present at that time. + */ + + msr_t msr; + u32 reg; + u8 i; + + if (cpuid_edx(1) & 0x4080) { /* MCE and MCA (edx[7] and edx[14]) */ + msr = rdmsr(MCG_CAP); + if (msr.lo & MCG_CTL_P){ /* MCG_CTL_P bit is set? */ + msr.lo &= 0xFF; + msr.lo--; + msr.lo <<= 2; /* multiply the count by 4 */ + reg = MC0_STA + msr.lo; + msr.lo = msr.hi = 0; + for (i=0; i < 4; i++) { + wrmsr (reg, msr); + reg -=4; /* Touch status regs for each bank */ + } + } + } +} + + /** * finalize_node_setup() * * Do any additional post HT init * - * This could really be moved to cache_as_ram_auto.c since it really isn't HT init. */ void finalize_node_setup(struct sys_info *sysinfo) { @@ -535,7 +948,10 @@ void finalize_node_setup(struct sys_info *sysinfo) sysinfo->sbdn = get_sbdn(sysinfo->sbbusn); #endif - setup_link_trans_cntrl(); + + for (i = 0; i < nodes; i++) { + cpuSetAMDPCI(i); + } #if FAM10_SET_FIDVID == 1 // Prep each node for FID/VID setup. diff --git a/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c b/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c index cebdcb6836..5ee60cadcf 100644 --- a/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c +++ b/src/mainboard/amd/serengeti_cheetah_fam10/cache_as_ram_auto.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -255,60 +255,30 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) // Load MPB val = cpuid_eax(1); - printk_debug("Family_Model: %08x \n", val); - - /* FIXME: Need to make sure that APs are updated with the microcode and Errata */ - update_microcode(val); - post_code(0x33); - - /* FIXME: This errata code needs to move out of the mainboard but I am not sure where to yet.*/ - /* FIXME: Check CPU revision to apply correct erratas */ - /* Rev B errata */ - /* Errata #169 - supercedes errata #131 */ - msr = rdmsr(0xC001001F); - msr.hi |= 1 << (32 - 32); - wrmsr(0xC001101F, msr); - - /* Errata #202 [DIS_PIGGY_BACK_SCRUB]=1 */ - msr = rdmsr(0xC0011022); - msr.hi |= 1 << 24; - wrmsr(0xC0010022, msr); - - /* 298 : FIXME: Fixed in B3/C1 */ -/* msr = rdmsr(0xC0010015); - msr.lo |= 1 << 3; - wrmsr(0xC0010015, msr); - - msr = rdmsr(0xC0011023); - msr.lo |= 1 << 1; - wrmsr(0xC0010023, msr); -*/ - /* FIXME: Erratum #254 revB1 BU_CFG[21]=1 */ - - + printk_debug("BSP Family_Model: %08x \n", val); printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n"); - setup_mb_resource_map(); - post_code(0x34); - -// dump_pci_device(PCI_DEV(CBB, CDB, 0)); - printk_debug("bsp_apicid = %02x \n", bsp_apicid); printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx); /* Setup sysinfo defaults */ set_sysinfo_in_ram(0); - post_code(0x35); + update_microcode(val); + post_code(0x33); - // FIXME: Add needs_reset check to HT links. - amd_ht_init(sysinfo); -// print_pci_devices(); -// dump_pci_devices(); + cpuSetAMDMSR(); + post_code(0x34); - post_code(0x36); + amd_ht_init(sysinfo); + post_code(0x35); + /* Setup nodes PCI space and start core 0 AP init. */ finalize_node_setup(sysinfo); + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); + /* wait for all the APs core0 started by finalize_node_setup. */ /* FIXME: A bunch of cores are going to start output to serial at once. It would be nice to fixup prink spinlocks for ROM XIP mode. @@ -378,10 +348,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) memreset_setup(); + post_code(0x40); // die("Die Before MCT init."); - post_code(0x40); printk_debug("raminit_amdmct()\n"); raminit_amdmct(sysinfo); post_code(0x41); diff --git a/src/northbridge/amd/amdfam10/raminit_amdmct.c b/src/northbridge/amd/amdfam10/raminit_amdmct.c index 72d8469737..9696689281 100644 --- a/src/northbridge/amd/amdfam10/raminit_amdmct.c +++ b/src/northbridge/amd/amdfam10/raminit_amdmct.c @@ -106,23 +106,26 @@ void mctGet_DIMMAddr(struct DCTStatStruc *pDCTstat, u32 node) u32 mctGetLogicalCPUID(u32 Node) { + /* FIXME: Move this to a more generic place. Maybe to the CPU code */ + /* Converts the CPUID to a logical ID MASK that is used to check + CPU version support versions */ u32 dev; u32 val, valx; u32 family, model, stepping; u32 ret; - dev = PA_NBMISC(Node); - val = Get_NB32(dev, 0xfc); - print_debug("Family_Model:"); print_debug_hex32(val); print_debug("\n"); - family = ((val >> 8) & 0x0f) + ((val>>20) & 0xff); - model = ((val>>4) & 0x0f) | ((val>>(16-4)) & 0xf0); - stepping = val & 0xff; - print_debug("Family:"); print_debug_hex8(family); print_debug("\t"); - print_debug("Model:"); print_debug_hex8(model); print_debug("\t"); - print_debug("Stepping:"); print_debug_hex8(stepping); print_debug("\n"); + if (Node == 0xFF) { /* current node */ + val = cpuid_eax(0x80000001); + } else { + dev = PA_NBMISC(Node); + val = Get_NB32(dev, 0xfc); + } + + family = ((val >> 8) & 0x0f) + ((val >> 20) & 0xff); + model = ((val >> 4) & 0x0f) | ((val >> (16-4)) & 0xf0); + stepping = val & 0x0f; - valx = (family<<12) | (model<<4) | (stepping); - print_debug("converted:"); print_debug_hex32(valx); print_debug("\n"); + valx = (family << 12) | (model << 4) | (stepping); switch (valx) { case 0x10000: @@ -134,7 +137,21 @@ u32 mctGetLogicalCPUID(u32 Node) case 0x10002: ret = AMD_DR_A2; break; + case 0x10020: + ret = AMD_DR_B0; + break; + case 0x10021: + ret = AMD_DR_B1; + break; + case 0x10022: + ret = AMD_DR_B2; + break; + case 0x10023: + ret = AMD_DR_B3; + break; default: + /* FIXME: mabe we should die() here. */ + print_err("FIXME! CPU Version unknown or not supported! \n"); ret = 0; } diff --git a/src/northbridge/amd/amdht/AsPsDefs.h b/src/northbridge/amd/amdht/AsPsDefs.h index 86d3375f07..62b7edba6d 100644 --- a/src/northbridge/amd/amdht/AsPsDefs.h +++ b/src/northbridge/amd/amdht/AsPsDefs.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,14 +21,6 @@ #ifndef ASPSDEFS_H #define ASPSDEFS_H -/* AMD Platform Types */ -#define AMD_PTYPE_DSK 1 -#define AMD_PTYPE_MOB 2 -#define AMD_PTYPE_SVR 4 -#define AMD_PTYPE_DC 8 -#define AMD_PTYPE_MC 0x10 -#define AMD_PTYPE_UMA 0x20 - #define APIC_BAR 0x1b /* APIC_BAR register */ #define APIC_BAR_BP 0x100 /* APIC_BAR BSP bit */ diff --git a/src/northbridge/amd/amdht/ht_wrapper.c b/src/northbridge/amd/amdht/ht_wrapper.c index aaf67a47a7..ad276e42ef 100644 --- a/src/northbridge/amd/amdht/ht_wrapper.c +++ b/src/northbridge/amd/amdht/ht_wrapper.c @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -60,6 +60,7 @@ #define NODE_MP(x) NODE_PCI(x,1) #define NODE_MC(x) NODE_PCI(x,3) #define NODE_LC(x) NODE_PCI(x,4) + static u32 get_nodes(void) { device_t dev; @@ -75,26 +76,6 @@ static u32 get_nodes(void) return nodes; } -static void enable_apic_ext_id(u32 node) -{ - u32 val; - val = pci_read_config32(NODE_HT(node), 0x68); - val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST); - pci_write_config32(NODE_HT(node), 0x68, val); -} - - -static void setup_link_trans_cntrl() -{ - /* FIXME: Not sure that this belongs here but it is HT related */ - u32 val; - val = pci_read_config32(NODE_HT(0), 0x68); - val |= 0x00206800; // DSNpReqLimit, LimitCldtCfg, BufRefPri, RespPassPW per BKDG; - pci_write_config32(NODE_HT(0), 0x68, val); -} - - - /** * void AMD_CB_EventNotify (u8 evtClass, u16 event, const u8 *pEventData0) diff --git a/src/northbridge/amd/amdmct/amddefs.h b/src/northbridge/amd/amdmct/amddefs.h index d2ba49790f..127173827e 100644 --- a/src/northbridge/amd/amdmct/amddefs.h +++ b/src/northbridge/amd/amdmct/amddefs.h @@ -1,7 +1,7 @@ /* * This file is part of the coreboot project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007-2008 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,6 +17,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +/* FIXME: this file should be moved to include/cpu/amd/amddefs.h */ + /* Public Revisions - USE THESE VERSIONS TO MAKE COMPARE WITH CPULOGICALID RETURN VALUE*/ #define AMD_SAFEMODE 0x80000000 /* Unknown future revision - SAFE MODE */ #define AMD_NPT_F0 0x00000001 /* F0 stepping */ @@ -37,33 +39,83 @@ #define AMD_DR_B1 0x00100000 /* Barcelona B1 */ #define AMD_DR_B2 0x00200000 /* Barcelona B2 */ #define AMD_DR_BA 0x00400000 /* Barcelona BA */ +#define AMD_DR_B3 0x00800000 /* Barcelona B3 */ /* - Groups - Create as many as you wish, from the above public values -*/ -#define AMD_NPT_F2 (AMD_NPT_F2C + AMD_NPT_F2D + AMD_NPT_F2E + AMD_NPT_F2G + AMD_NPT_F2J + AMD_NPT_F2K) + * Groups - Create as many as you wish, from the above public values + */ +#define AMD_NPT_F2 (AMD_NPT_F2C | AMD_NPT_F2D | AMD_NPT_F2E | AMD_NPT_F2G | AMD_NPT_F2J | AMD_NPT_F2K) #define AMD_NPT_F3 (AMD_NPT_F3L) -#define AMD_NPT_Fx (AMD_NPT_F0 + AMD_NPT_F1 + AMD_NPT_F2 + AMD_NPT_F3) -#define AMD_NPT_Gx (AMD_NPT_G0A + AMD_NPT_G1B) -#define AMD_NPT_ALL (AMD_NPT_Fx + AMD_NPT_Gx) -#define AMD_DR_Ax (AMD_DR_A0A + AMD_DR_A1B + AMD_DR_A2) -#define AMD_FINEDELAY (AMD_NPT_F0 + AMD_NPT_F1 + AMD_NPT_F2) +#define AMD_NPT_Fx (AMD_NPT_F0 | AMD_NPT_F1 | AMD_NPT_F2 | AMD_NPT_F3) +#define AMD_NPT_Gx (AMD_NPT_G0A | AMD_NPT_G1B) +#define AMD_NPT_ALL (AMD_NPT_Fx | AMD_NPT_Gx) +#define AMD_FINEDELAY (AMD_NPT_F0 | AMD_NPT_F1 | AMD_NPT_F2) #define AMD_GT_F0 (AMD_NPT_ALL AND NOT AMD_NPT_F0) +#define AMD_DR_Ax (AMD_DR_A0A + AMD_DR_A1B + AMD_DR_A2) +#define AMD_DR_Bx (AMD_DR_B0 | AMD_DR_B1 | AMD_DR_B2 | AMD_DR_B3 | AMD_DR_BA) +#define AMD_DR_LT_B3 (AMD_DR_B0 | AMD_DR_B1 | AMD_DR_B2 | AMD_DR_BA) +#define AMD_DR_GT_B0 (AMD_DR_ALL & ~(AMD_DR_B0)) +#define AMD_DR_ALL (AMD_DR_Bx) +/* + * Public Platforms - USE THESE VERSIONS TO MAKE COMPARE WITH CPUPLATFORMTYPE RETURN VALUE + */ +#define AMD_PTYPE_DSK 0x001 /* Desktop/DTR/UP */ +#define AMD_PTYPE_MOB 0x002 /* Mobile/Cool-n-quiet */ +#define AMD_PTYPE_SVR 0x004 /* Workstation/Server/Multicore DT */ +#define AMD_PTYPE_UC 0x008 /* Single Core */ +#define AMD_PTYPE_DC 0x010 /* Dual Core */ +#define AMD_PTYPE_MC 0x020 /* Multi Core (>2) */ +#define AMD_PTYPE_UMA 0x040 /* UMA required */ -#define CPUID_EXT_PM 0x80000007 - -#define CPUID_MODEL 1 + /* + * Groups - Create as many as you wish, from the above public values + */ +#define AMD_PTYPE_ALL 0xFFFFFFFF /* A mask for all */ -#define HWCR 0xC0010015 +/* + * CPU PCI HT PHY REGISTER, LINK TYPES - PRIVATE + */ +#define HTPHY_LINKTYPE_HT3 0x00000001 +#define HTPHY_LINKTYPE_HT1 0x00000002 +#define HTPHY_LINKTYPE_COHERENT 0x00000004 +#define HTPHY_LINKTYPE_NONCOHERENT 0x00000008 +#define HTPHY_LINKTYPE_CONNECTED (HTPHY_LINKTYPE_COHERENT | HTPHY_LINKTYPE_NONCOHERENT) +#define HTPHY_LINKTYPE_GANGED 0x00000010 +#define HTPHY_LINKTYPE_UNGANGED 0x00000020 +#define HTPHY_LINKTYPE_ALL 0x7FFFFFFF -#define FidVidStatus 0xC0010042 +/* + * CPU HT PHY REGISTERS, FIELDS, AND MASKS + */ +#define HTPHY_OFFSET_MASK 0xE00001FF +#define HTPHY_WRITE_CMD 0x40000000 +#define HTPHY_IS_COMPLETE_MASK 0x80000000 +#define HTPHY_DIRECT_MAP 0x20000000 +#define HTPHY_DIRECT_OFFSET_MASK 0xE000FFFF +/* + * Various AMD MSRs + */ +#define CPUID_EXT_PM 0x80000007 +#define CPUID_MODEL 1 +#define MCG_CAP 0x00000179 + #define MCG_CTL_P 8 +#define MC0_CTL 0x00000400 +#define MC0_STA MC0_CTL + 1 #define FS_Base 0xC0000100 - - +#define SYSCFG 0xC0010010 +#define HWCR 0xC0010015 +#define NB_CFG 0xC001001F +#define FidVidStatus 0xC0010042 +#define MC4_CTL_MASK 0xC0010048 +#define OSVW_ID_Length 0xC0010140 +#define OSVW_Status 0xC0010141 +#define CPUIDFEATURES 0xC0011004 +#define LS_CFG 0xC0011020 +#define DC_CFG 0xC0011022 #define BU_CFG 0xC0011023 #define BU_CFG2 0xC001102A -- cgit v1.2.3