From d4759d0f22892cc740d5aae559eaf5b9b5ab735a Mon Sep 17 00:00:00 2001 From: Bari Ari Date: Mon, 1 Sep 2008 01:48:07 +0000 Subject: This patch gets the Epia-CN working without ACPI or APIC. All devices work, no irq storms. Enjoy. Signed-off-by: Bari Ari Acked-by: Peter Stuge git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3556 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/via/epia-cn/Config.lb | 14 +++++----- src/mainboard/via/epia-cn/Options.lb | 2 +- src/mainboard/via/epia-cn/auto.c | 45 +++++++++++++------------------ src/northbridge/via/cn700/raminit.c | 2 +- src/northbridge/via/cn700/vga.c | 10 +++---- src/southbridge/via/vt8237r/vt8237r.c | 2 -- src/southbridge/via/vt8237r/vt8237r_lpc.c | 26 ++++++++++++++---- targets/via/epia-cn/Config.lb | 7 +++++ 8 files changed, 60 insertions(+), 48 deletions(-) diff --git a/src/mainboard/via/epia-cn/Config.lb b/src/mainboard/via/epia-cn/Config.lb index 52eb18492f..6e48b2b6de 100644 --- a/src/mainboard/via/epia-cn/Config.lb +++ b/src/mainboard/via/epia-cn/Config.lb @@ -98,12 +98,14 @@ chip northbridge/via/cn700 # Northbridge register "ide0_80pin_cable" = "0" register "ide1_80pin_cable" = "0" device pci f.0 on end # IDE - register "fn_ctrl_lo" = "0x8a" - register "fn_ctrl_hi" = "0x9d" - device pci 10.0 on end # USB 1.1 - device pci 10.1 on end # USB 1.1 - device pci 10.2 on end # USB 1.1 - device pci 10.3 on end # USB 1.1 + register "fn_ctrl_lo" = "0x80" + register "fn_ctrl_hi" = "0x1d" + device pci 10.0 on end # OHCI + device pci 10.1 on end # OHCI + device pci 10.2 on end # OHCI + device pci 10.3 on end # OHCI + device pci 10.4 on end # EHCI + device pci 10.5 on end # UDCI device pci 11.0 on # Southbridge LPC chip superio/via/vt1211 # Super I/O device pnp 2e.0 off # Floppy diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb index fee1920a6c..7d392c4b84 100644 --- a/src/mainboard/via/epia-cn/Options.lb +++ b/src/mainboard/via/epia-cn/Options.lb @@ -94,7 +94,7 @@ default USE_OPTION_TABLE = 0 default _RAMBASE = 0x00004000 default CONFIG_ROM_PAYLOAD = 1 default CROSS_COMPILE = "" -default CC = "$(CROSS_COMPILE)gcc -m32" +default CC = "$(CROSS_COMPILE)gcc -m32 -fno-stack-protector" default HOSTCC = "gcc" ## diff --git a/src/mainboard/via/epia-cn/auto.c b/src/mainboard/via/epia-cn/auto.c index 592547b18a..62a3b2646e 100644 --- a/src/mainboard/via/epia-cn/auto.c +++ b/src/mainboard/via/epia-cn/auto.c @@ -55,34 +55,27 @@ static void enable_mainboard_devices(void) { device_t dev; u8 reg; - - /* - * If I enable SATA, FILO will not find the IDE disk, so I'll disable - * SATA here. To not conflict with PCI spec, I'll move IDE device - * from 00:0f.1 to 00:0f.0. + + dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); + if (dev == PCI_DEV_INVALID) + die("Southbridge not found!!!\n"); + + /* bit=0 means enable function (per CX700 datasheet) + * 5 16.1 USB 2 + * 4 16.0 USB 1 + * 3 15.0 SATA and PATA + * 2 16.2 USB 3 + * 1 16.4 USB EHCI */ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT6420_SATA), 0); - if (dev != PCI_DEV_INVALID) { - /* Enable PATA. */ - reg = pci_read_config8(dev, 0xd1); - reg |= 0x08; - pci_write_config8(dev, 0xd1, reg); - reg = pci_read_config8(dev, 0x49); - reg |= 0x80; - pci_write_config8(dev, 0x49, reg); - } else { - print_debug("No SATA device\r\n"); - } + pci_write_config8(dev, 0x50, 0x80); - /* Disable SATA, and PATA device will be 00:0f.0. */ - dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), 0); - if (dev == PCI_DEV_INVALID) - die("Southbridge not found!!!\r\n"); - reg = pci_read_config8(dev, 0x50); - reg |= 0x08; - pci_write_config8(dev, 0x50, reg); + /* bit=1 means enable internal function (per CX700 datasheet) + * 3 Internal RTC + * 2 Internal PS2 Mouse + * 1 Internal KBC Configuration + * 0 Internal Keyboard Controller + */ + pci_write_config8(dev, 0x51, 0x1d); } static const struct mem_controller ctrl = { diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c index 3a70e37440..20efdea8cd 100644 --- a/src/northbridge/via/cn700/raminit.c +++ b/src/northbridge/via/cn700/raminit.c @@ -366,7 +366,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl) /* dram duty control */ pci_write_config8(ctrl->d0f3, 0xed, 0x10); - /* SMM and APIC deocoding, we donot use SMM */ + /* SMM and APIC decoding, we do not use SMM */ reg = 0x29; pci_write_config8(ctrl->d0f3, 0x86, reg); /* SMM and APIC decoding mirror */ diff --git a/src/northbridge/via/cn700/vga.c b/src/northbridge/via/cn700/vga.c index 15756841fd..f00f18dda0 100644 --- a/src/northbridge/via/cn700/vga.c +++ b/src/northbridge/via/cn700/vga.c @@ -45,14 +45,12 @@ static void vga_init(device_t dev) u8 reg8; print_debug("Copying BOCHS Bios to 0xf000\n"); -/* Copy the BOCHs BIOS from 0xFFFFFFFF - ROM_SIZE - BOCHs size (64k) to 0xf0000 - This is for compatibility with the VGA ROM's BIOS callbacks */ - memcpy(0xf0000, (0xFFFFFFFF - ROM_SIZE - 0x10000), 0x10000); + /* Copy BOCHS BIOS from 4G-ROM_SIZE-64k (in flash) to 0xf0000 (in RAM) + * This is for compatibility with the VGA ROM's BIOS callbacks */ + memcpy(0xf0000, (0xffffffff - ROM_SIZE - 0xffff), 0x10000); printk_debug("Initializing VGA\n"); - pci_write_config8(dev, 0x3c, 0xb); - /* Set memory rate to 200MHz */ outb(0x3d, CRTM_INDEX); reg8 = inb(CRTM_DATA); @@ -71,8 +69,6 @@ static void vga_init(device_t dev) pci_write_config8(dev, 0x0d, 0x20); pci_write_config32(dev,0x10, 0xf4000008); pci_write_config32(dev,0x14, 0xfb000000); - pci_write_config8(dev, 0x3e, 0x02); - pci_write_config8(dev, 0x3c, 0x0a); printk_debug("INSTALL REAL-MODE IDT\n"); diff --git a/src/southbridge/via/vt8237r/vt8237r.c b/src/southbridge/via/vt8237r/vt8237r.c index 9b85f2fc32..a72b9a1c06 100644 --- a/src/southbridge/via/vt8237r/vt8237r.c +++ b/src/southbridge/via/vt8237r/vt8237r.c @@ -79,8 +79,6 @@ static void vt8237r_enable(struct device *dev) pci_write_config8(dev, 0x51, sb->fn_ctrl_hi); /* TODO: If SATA is disabled, move IDE to fn0 to conform PCI specs. */ - /* Extend ROM decode to 1MB FFC00000 - FFFFFFFF */ - pci_write_config8(dev, 0x41, 0x7f); } struct chip_operations southbridge_via_vt8237r_ops = { diff --git a/src/southbridge/via/vt8237r/vt8237r_lpc.c b/src/southbridge/via/vt8237r/vt8237r_lpc.c index 7022fad770..d4721a23f3 100644 --- a/src/southbridge/via/vt8237r/vt8237r_lpc.c +++ b/src/southbridge/via/vt8237r/vt8237r_lpc.c @@ -244,10 +244,20 @@ static void vt8237r_init(struct device *dev) enables |= 0x80; pci_write_config8(dev, 0x6C, enables); - /* FIXME: Map 4MB of flash into the address space, - * this should be in CAR call. + /* + * ROM decode + * bit range + * 7 000E0000h-000EFFFFh + * 6 FFF00000h-FFF7FFFFh + * 5 FFE80000h-FFEFFFFFh + * 4 FFE00000h-FFE7FFFFh + * 3 FFD80000h-FFDFFFFFh + * 2 FFD00000h-FFD7FFFFh + * 1 FFC80000h-FFCFFFFFh + * 0 FFC00000h-FFC7FFFFh + * So 0x7f here sets ROM decode to FFC00000-FFFFFFFF or 4Mbyte. */ - /* pci_write_config8(dev, 0x41, 0x7f); */ + pci_write_config8(dev, 0x41, 0x7f); /* Set bit 6 of 0x40 (I/O recovery time). * IMPORTANT FIX - EISA = ECLR reg at 0x4d0! Decoding must be on so @@ -271,8 +281,14 @@ static void vt8237r_init(struct device *dev) /* ROM memory cycles go to LPC. */ pci_write_config8(dev, 0x59, 0x80); - /* Bypass APIC De-Assert Message, INTE#, INTF#, INTG#, INTH# as PCI. */ - pci_write_config8(dev, 0x5B, 0xb); + /* + * bit meaning + * 3 Bypass APIC De-Assert Message (1=Enable) + * 1 possibly "INTE#, INTF#, INTG#, INTH# as PCI" + * bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch + * 0 Dynamic Clock Gating Main Switch (1=Enable) + */ + pci_write_config8(dev, 0x5b, 0x9); /* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */ pci_write_config8(dev, 0x48, 0x8c); diff --git a/targets/via/epia-cn/Config.lb b/targets/via/epia-cn/Config.lb index 359659c12c..c6d82e5b5d 100644 --- a/targets/via/epia-cn/Config.lb +++ b/targets/via/epia-cn/Config.lb @@ -22,6 +22,13 @@ target via_epia_cn mainboard via/epia-cn +option MAXIMUM_CONSOLE_LOGLEVEL=8 +option DEFAULT_CONSOLE_LOGLEVEL=8 +option CONFIG_CONSOLE_SERIAL8250=1 + +# coreboot C code runs at this location in RAM +option _RAMBASE=0x00004000 + # # Generate the final ROM like this: # cat vgabios bochsbios coreboot.rom > coreboot.rom.final -- cgit v1.2.3