From d36905cdd586b782db6bf3d76e8622794b4a0bb9 Mon Sep 17 00:00:00 2001 From: Elyes HAOUAS Date: Wed, 23 Jul 2014 09:23:29 +0200 Subject: mainboard/msi/ms9282: Remove trailing whitespace Change-Id: I93808f7798a18ab0993401af556fbb65dbcee32a Signed-off-by: Elyes HAOUAS Reviewed-on: http://review.coreboot.org/6347 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi --- src/mainboard/msi/ms9282/devicetree.cb | 360 +++++++++++------------ src/mainboard/msi/ms9282/get_bus_conf.c | 14 +- src/mainboard/msi/ms9282/irq_tables.c | 122 ++++---- src/mainboard/msi/ms9282/mb_sysconf.h | 4 +- src/mainboard/msi/ms9282/mptable.c | 94 +++--- src/mainboard/msi/ms9282/resourcemap.c | 500 ++++++++++++++++---------------- src/mainboard/msi/ms9282/romstage.c | 72 ++--- 7 files changed, 583 insertions(+), 583 deletions(-) diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb index 82103229be..747347e504 100644 --- a/src/mainboard/msi/ms9282/devicetree.cb +++ b/src/mainboard/msi/ms9282/devicetree.cb @@ -1,182 +1,182 @@ chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9282 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off end # WDTO#, PLED - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux - device i2c 70 on # 0 pca9554 1 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - device i2c 70 on # 0 pca9554 2 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - end - end - device pci 1.1 on # SM 1 - chip drivers/i2c/i2cmux2 # pca9554 SMBus mux - device i2c 72 on # PCA9554 channel 1 - chip drivers/i2c/adm1027 # HWM ADT7476 1 - device i2c 2e on end - end - end - device i2c 72 on # PCA9545 channel 2 - chip drivers/i2c/adm1027 # HWM ADT7463 - device i2c 2e on end - end - end - device i2c 72 on end # PCA9545 channel 3 - device i2c 72 on # PCA9545 channel 4 - chip drivers/i2c/adm1027 # HWM ADT7476 2 - device i2c 2e on end - end - end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # P2P - device pci 4.0 on end - end - device pci 7.0 on end # reserve - device pci 8.0 on end # MAC0 - device pci 9.0 on end # MAC1 - device pci a.0 on - device pci 0.0 on - device pci 4.0 on end # PCI-E LAN1 - device pci 4.1 on end # PCI-E LAN2 - end - end # 0x376 - device pci b.0 on end # PCI E 0x374 - device pci c.0 on end - device pci d.0 on # SAS - device pci 0.0 on end - end # PCI E 1 0x378 - device pci e.0 on end # PCI E 0 0x375 - device pci f.0 on end # PCI E 0x377, PCI-E slot - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end + device cpu_cluster 0 on # (L)APIC cluster + chip cpu/amd/socket_F # CPU socket + device lapic 0 on end # Local APIC of the CPU + end + end + device domain 0 on # PCI domain + subsystemid 0x1462 0x9282 inherit + chip northbridge/amd/amdk8 # Northbridge / RAM controller + device pci 18.0 on # Link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 2e.0 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.3 off # Com2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.5 on # PS/2 keyboard & mouse + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 2e.106 off # Serial flash interface (SFI) + io 0x60 = 0x100 + end + device pnp 2e.007 off # GPIO 1 + end + device pnp 2e.107 off # Game port + io 0x60 = 0x220 + end + device pnp 2e.207 off # MIDI + io 0x62 = 0x300 + irq 0x70 = 9 + end + device pnp 2e.307 off # GPIO 6 + end + device pnp 2e.8 off end # WDTO#, PLED + device pnp 2e.009 off # GPIO 2 + end + device pnp 2e.109 off # GPIO 3 + end + device pnp 2e.209 off # GPIO 4 + end + device pnp 2e.309 off # GPIO 5 + end + device pnp 2e.a off end # ACPI + device pnp 2e.b on # Hardware monitor + io 0x60 = 0x290 + irq 0x70 = 5 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux + device i2c 70 on # 0 pca9554 1 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 57 on end + end + end + device i2c 70 on # 0 pca9554 2 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 54 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 55 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 56 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 57 on end + end + end + end + end + device pci 1.1 on # SM 1 + chip drivers/i2c/i2cmux2 # pca9554 SMBus mux + device i2c 72 on # PCA9554 channel 1 + chip drivers/i2c/adm1027 # HWM ADT7476 1 + device i2c 2e on end + end + end + device i2c 72 on # PCA9545 channel 2 + chip drivers/i2c/adm1027 # HWM ADT7463 + device i2c 2e on end + end + end + device i2c 72 on end # PCA9545 channel 3 + device i2c 72 on # PCA9545 channel 4 + chip drivers/i2c/adm1027 # HWM ADT7476 2 + device i2c 2e on end + end + end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 on end # SATA 2 + device pci 6.0 on # P2P + device pci 4.0 on end + end + device pci 7.0 on end # reserve + device pci 8.0 on end # MAC0 + device pci 9.0 on end # MAC1 + device pci a.0 on + device pci 0.0 on + device pci 4.0 on end # PCI-E LAN1 + device pci 4.1 on end # PCI-E LAN2 + end + end # 0x376 + device pci b.0 on end # PCI E 0x374 + device pci c.0 on end + device pci d.0 on # SAS + device pci 0.0 on end + end # PCI E 1 0x378 + device pci e.0 on end # PCI E 0 0x375 + device pci f.0 on end # PCI E 0x377, PCI-E slot + register "ide0_enable" = "1" + register "ide1_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end end diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c index 4ab124d5fc..195ddc4fce 100644 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ b/src/mainboard/msi/ms9282/get_bus_conf.c @@ -101,21 +101,21 @@ void get_bus_conf(void) m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); } else { printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sysconf.sbdn + 0x06); + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sysconf.sbdn + 0x06); } for (i = 2; i < 8; i++) { dev = - dev_find_slot(m->bus_mcp55[0], - PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); + dev_find_slot(m->bus_mcp55[0], + PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); if (dev) { m->bus_mcp55[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); + pci_read_config8(dev, PCI_SECONDARY_BUS); } else { printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); } } diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c index c02e92c19d..b41ca95938 100644 --- a/src/mainboard/msi/ms9282/irq_tables.c +++ b/src/mainboard/msi/ms9282/irq_tables.c @@ -38,21 +38,21 @@ #include "mb_sysconf.h" static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) + uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) { - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; } @@ -60,73 +60,73 @@ static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t dev unsigned long write_pirq_routing_table(unsigned long addr) { - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned slot_num; + uint8_t *v; + struct mb_sysconf_t *m; + unsigned sbdn; - uint8_t sum=0; - int i; + uint8_t sum=0; + int i; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; + m = sysconf.mb; - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); + /* This table must be between 0xf0000 & 0x100000 */ + printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - pirq = (void *)(addr); - v = (uint8_t *)(addr); + pirq = (void *)(addr); + v = (uint8_t *)(addr); - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn+6)<<3)|0; + pirq->rtr_bus = m->bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn+6)<<3)|0; - pirq->exclusive_irqs = 0; + pirq->exclusive_irqs = 0; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; - pirq->miniport_data = 0; + pirq->miniport_data = 0; - memset(pirq->rfu, 0, sizeof(pirq->rfu)); + memset(pirq->rfu, 0, sizeof(pirq->rfu)); - pirq_info = (void *) ( &pirq->checksum + 1); - slot_num = 0; + pirq_info = (void *) ( &pirq->checksum + 1); + slot_num = 0; //pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; + write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + for(i=1; i< sysconf.hc_possible_num; i++) { + if(!(sysconf.pci1234[i] & 0x1) ) continue; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } + write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } - pirq->size = 32 + 16 * slot_num; + pirq->size = 32 + 16 * slot_num; - for (i = 0; i < pirq->size; i++) - sum += v[i]; + for (i = 0; i < pirq->size; i++) + sum += v[i]; - sum = pirq->checksum - sum; + sum = pirq->checksum - sum; - if (sum != pirq->checksum) { - pirq->checksum = sum; - } + if (sum != pirq->checksum) { + pirq->checksum = sum; + } - printk(BIOS_INFO, "done.\n"); + printk(BIOS_INFO, "done.\n"); - return (unsigned long) pirq_info; + return (unsigned long) pirq_info; } diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h index a1ad772bb0..4b1516884b 100644 --- a/src/mainboard/msi/ms9282/mb_sysconf.h +++ b/src/mainboard/msi/ms9282/mb_sysconf.h @@ -26,8 +26,8 @@ #define MB_SYSCONF_H struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; + unsigned char bus_mcp55[8]; //1 + unsigned apicid_mcp55; }; #endif diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c index c22ec180de..1764cf358b 100644 --- a/src/mainboard/msi/ms9282/mptable.c +++ b/src/mainboard/msi/ms9282/mptable.c @@ -32,17 +32,17 @@ static void *smp_write_config_table(void *v) { - struct mp_config_table *mc; + struct mp_config_table *mc; struct mb_sysconf_t *m; unsigned sbdn; int i, j, bus_isa; - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); mptable_init(mc, LOCAL_APIC_ADDR); - smp_write_processors(mc); + smp_write_processors(mc); get_bus_conf(); sbdn = sysconf.sbdn; @@ -50,81 +50,81 @@ static void *smp_write_config_table(void *v) mptable_write_buses(mc, NULL, &bus_isa); -/*I/O APICs: APIC ID Version State Address*/ - { - device_t dev; - struct resource *res; - uint32_t dword; +/*I/O APICs: APIC ID Version State Address*/ + { + device_t dev; + struct resource *res; + uint32_t dword; - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); - } + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) { + smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base); + } - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); + dword = 0xd00002d2; + pci_write_config32(dev, 0x84, dword); - } + } - } + } mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); //SMBUS - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); //USB1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 //USB2.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 //SATA1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 //SATA2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 //SATA3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 //NIC1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 //NIC2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - for(j=7; j>=2; j--) { - if(!m->bus_mcp55[j]) continue; - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - } + for(j=7; j>=2; j--) { + if(!m->bus_mcp55[j]) continue; + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); + } + } - for(j=0; j<1; j++) - for(i=0;i<4;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - } + for(j=0; j<1; j++) + for(i=0;i<4;i++) { + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); + } /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ + mptable_lintsrc(mc, bus_isa); + /* There is no extension information... */ - /* Compute the checksums */ - return mptable_finalize(mc); + /* Compute the checksums */ + return mptable_finalize(mc); } unsigned long write_smp_table(unsigned long addr) { - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); + void *v; + v = smp_write_floating_table(addr, 0); + return (unsigned long)smp_write_config_table(v); } diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c index 7a6329c5af..76b7dc8734 100644 --- a/src/mainboard/msi/ms9282/resourcemap.c +++ b/src/mainboard/msi/ms9282/resourcemap.c @@ -31,268 +31,268 @@ static void setup_ms9282_resource_map(void) { - static const unsigned int register_values[] = { + static const unsigned int register_values[] = { #if 1 - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, #endif #if 1 - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, #endif #if 1 - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, #endif - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ #if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, #endif - }; + }; - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); + int max; + max = ARRAY_SIZE(register_values); + setup_resource_map(register_values, max); } diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c index 9e4a227de9..9a6e21fc3a 100644 --- a/src/mainboard/msi/ms9282/romstage.c +++ b/src/mainboard/msi/ms9282/romstage.c @@ -53,14 +53,14 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl) { #define SMBUS_SWITCH1 0x70 #define SMBUS_SWITCH2 0x72 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); + unsigned device=(ctrl->channel0[0])>>8; + smbus_send_byte(SMBUS_SWITCH1, device); + smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); } static inline int spd_read_byte(unsigned device, unsigned address) { - return smbus_read_byte(device, address); + return smbus_read_byte(device, address); } #include "northbridge/amd/amdk8/f.h" @@ -74,10 +74,10 @@ static inline int spd_read_byte(unsigned device, unsigned address) //set GPIO to input mode #define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ #include "southbridge/nvidia/mcp55/early_setup_car.c" #include "cpu/amd/model_fxx/init_cpus.c" @@ -87,16 +87,16 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - uint32_t dword; - uint8_t byte; + uint32_t dword; + uint8_t byte; - byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); + byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); + dword |= (1<<0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); } //CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. @@ -115,20 +115,20 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) }; unsigned bsp_apicid = 0; - int needs_reset; + int needs_reset; struct sys_info *sysinfo = &sysinfo_car; - if (!cpu_init_detectedx && boot_cpu()) { + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ enumerate_ht_chain(); sio_setup(); - } + } - if (bist == 0) { - //init_cpus(cpu_init_detectedx); - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } + if (bist == 0) { + //init_cpus(cpu_init_detectedx); + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + } winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); console_init(); @@ -143,28 +143,28 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS - // It is said that we should start core1 after all core0 launched - start_other_cores(); - //wait_all_other_cores_started(bsp_apicid); + // It is said that we should start core1 after all core0 launched + start_other_cores(); + //wait_all_other_cores_started(bsp_apicid); #endif - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn + ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn init_timer(); /* Need to use TMICT to synconize FID/VID. */ needs_reset = optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + //It's the time to set ctrl now; + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); + enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - post_cache_as_ram(); + post_cache_as_ram(); } -- cgit v1.2.3