From d323d844f743e2876e404cf13ddd32a1bd050715 Mon Sep 17 00:00:00 2001 From: Patrick Rudolph Date: Sun, 29 Oct 2023 19:59:56 +0100 Subject: util/autoport: Improve USB code Currently autoport fills in USB current '0' if the detected setting isn't one of the known settings. This works as 0 is a valid setting from C point of view, but it's not supported on desktop PCs and on mobile platform results in the lowest possible USB PHY gain. Thus this might cause instabilities as the original firmware had stronger USB drive currents and gain settings. Add more known USB current fields to the map and generate a FIXME as comment when the detected current isn't one of the known entries instead of defaulting to 0. Change-Id: I48f4d636ce3401ba188f5519b5ff45fccf13f080 Signed-off-by: Patrick Rudolph Reviewed-on: https://review.coreboot.org/c/coreboot/+/78828 Reviewed-by: Lean Sheng Tan Tested-by: build bot (Jenkins) Reviewed-by: Arthur Heymans --- util/autoport/bd82x6x.go | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/util/autoport/bd82x6x.go b/util/autoport/bd82x6x.go index 6ce15a2ced..76411e72a1 100644 --- a/util/autoport/bd82x6x.go +++ b/util/autoport/bd82x6x.go @@ -309,6 +309,10 @@ func (b bd82x6x) Scan(ctx Context, addr PCIDevData) { 0x2000055b: 2, 0x20000f51: 3, 0x2000094a: 4, + 0x2000035f: 5, + 0x20000f53: 6, + 0x20000357: 7, + 0x20000353: 8, } for port := uint(0); port < 14; port++ { @@ -327,10 +331,16 @@ func (b bd82x6x) Scan(ctx Context, addr PCIDevData) { } } } - fmt.Fprintf(sb, "\t{ %d, %d, %d },\n", + current, ok := currentMap[inteltool.RCBA[uint16(0x3500+4*port)]] + comment := "" + if !ok { + comment = fmt.Sprintf("// FIXME: Unknown current: RCBA(0x%x)=0x%x", 0x3500+4*port, uint16(0x3500+4*port)) + } + fmt.Fprintf(sb, "\t{ %d, %d, %d }, %s\n", ((inteltool.RCBA[0x359c]>>port)&1)^1, - currentMap[inteltool.RCBA[uint16(0x3500+4*port)]], - OCPin) + current, + OCPin, + comment) } sb.WriteString("};\n") -- cgit v1.2.3