From cdc9af9ebd5178287cfa9e828dd1c181c99aea4d Mon Sep 17 00:00:00 2001 From: Naresh G Solanki Date: Mon, 24 Jul 2017 15:38:47 +0530 Subject: mb/google/soraka: Camera PMIC run time power control Currently PMIC (tps68470) is in active state even when cameras are not in use. PMIC is put into SLEEP mode only when entering S3 via smihandler. With this change PMIC will be put into SLEEP mode as soon as sensors & VCM voltage outputs are turned off. This will allow run time power saving when camera is not in use. PMIC will be reset in first boot & across S3 & S0ix cycles. Also, remove the smi handler for PMIC power management & handle it as part of sensor and VCM ACPI PowerResource. BUG=b:63903239 TEST= Build for Soraka. Check Camera probe, Capture image across S3 & S0ix cycles. Also checked the following & found no regression: 1. Typical camera use cases 2. Stability tests related to camera 3. Reliability tests related to camera 4. PnP tests related to camera 5. Latency related tests with camera Change-Id: I23b0c0a887c9eb5d29b89f14aebba273b01228e0 Signed-off-by: Rizwan Qureshi Signed-off-by: Naresh G Solanki Reviewed-on: https://review.coreboot.org/20741 Tested-by: build bot (Jenkins) Reviewed-by: Rajmohan Mani Reviewed-by: Furquan Shaikh --- src/mainboard/google/poppy/acpi/mipi_camera.asl | 43 ++++++++++++++++++++++ src/mainboard/google/poppy/smihandler.c | 7 ---- .../google/poppy/variants/baseboard/gpio.c | 2 +- src/mainboard/google/poppy/variants/soraka/gpio.c | 2 +- 4 files changed, 45 insertions(+), 9 deletions(-) diff --git a/src/mainboard/google/poppy/acpi/mipi_camera.asl b/src/mainboard/google/poppy/acpi/mipi_camera.asl index 38cf060bdb..3cf4ec0196 100644 --- a/src/mainboard/google/poppy/acpi/mipi_camera.asl +++ b/src/mainboard/google/poppy/acpi/mipi_camera.asl @@ -27,6 +27,47 @@ Scope (\_SB.PCI0.I2C2) Return (0x0F) } + Method (PMON, 0, Serialized) { + /* + * Turn on 3V3_VDD. It takes around 1 ms for voltage to + * settle to 3.3 Volt. Provide additional 2 ms delay. + */ + STXS(EN_PP3300_DX_CAM) + Sleep (3) + } + + Method (PMOF, 0, Serialized) { + /* Make Sure all PMIC outputs are off. */ + If (LEqual (VSIC, Zero)) { + CTXS(EN_PP3300_DX_CAM) + } + } + + Name (_PR0, Package (0x01) { CPMC }) + Name (_PR3, Package (0x01) { CPMC }) + + /* Power resource methods for PMIC */ + PowerResource (CPMC, 0, 0) { + Name (RSTO, 1) + Method (_ON, 0, Serialized) { + PMON() + /* Do not reset PMIC across S3 and S0ix cycle */ + if (Lequal (RSTO, 1)) { + CTXS(EN_CAM_PMIC_RST_L) + Sleep(1) + STXS(EN_CAM_PMIC_RST_L) + Sleep (3) + RSTO = 0 + } + } + Method (_OFF, 0, Serialized) { + PMOF() + } + Method (_STA, 0, Serialized) { + Return (GTXS(EN_PP3300_DX_CAM)) + } + } + /* Marks the availability of all the operation regions */ Name (AVBL, Zero) Name (AVGP, Zero) @@ -290,6 +331,7 @@ Scope (\_SB.PCI0.I2C2) If (LEqual (VSIC, Zero)) { VSIO = 0 Sleep(1) + PMOF() } } } ElseIf (LEqual (Arg0, 1)) { @@ -297,6 +339,7 @@ Scope (\_SB.PCI0.I2C2) If (LLess (VSIC, 4)) { /* Turn on VSIO */ If (LEqual (VSIC, Zero)) { + PMON() VSIO = 3 if (LNotEqual (IOVA, 52)) { diff --git a/src/mainboard/google/poppy/smihandler.c b/src/mainboard/google/poppy/smihandler.c index 1a86d0f773..70d0ab4edf 100644 --- a/src/mainboard/google/poppy/smihandler.c +++ b/src/mainboard/google/poppy/smihandler.c @@ -27,17 +27,10 @@ void mainboard_smi_espi_handler(void) chromeec_smi_process_events(); } -static void mainboard_gpio_smi_sleep(void) -{ - /* Power down camera PMIC */ - gpio_set(EN_PP3300_DX_CAM, 0); -} - void mainboard_smi_sleep(u8 slp_typ) { chromeec_smi_sleep(slp_typ, MAINBOARD_EC_S3_WAKE_EVENTS, MAINBOARD_EC_S5_WAKE_EVENTS); - mainboard_gpio_smi_sleep(); } int mainboard_smi_apmc(u8 apmc) diff --git a/src/mainboard/google/poppy/variants/baseboard/gpio.c b/src/mainboard/google/poppy/variants/baseboard/gpio.c index 803a63100f..e74e4afcf6 100644 --- a/src/mainboard/google/poppy/variants/baseboard/gpio.c +++ b/src/mainboard/google/poppy/variants/baseboard/gpio.c @@ -145,7 +145,7 @@ static const struct pad_config gpio_table[] = { /* C10 : UART0_RTS# ==> EC_CAM_PMIC_RST_L */ PAD_CFG_GPO(GPP_C10, 1, DEEP), /* C11 : UART0_CTS# ==> EN_PP3300_DX_CAM */ - PAD_CFG_GPO(GPP_C11, 1, DEEP), + PAD_CFG_GPO(GPP_C11, 0, DEEP), /* C12 : UART1_RXD ==> PCH_MEM_CONFIG[0] */ PAD_CFG_GPI(GPP_C12, NONE, DEEP), /* C13 : UART1_TXD ==> PCH_MEM_CONFIG[1] */ diff --git a/src/mainboard/google/poppy/variants/soraka/gpio.c b/src/mainboard/google/poppy/variants/soraka/gpio.c index 6f7a3e70e4..cd1258db95 100644 --- a/src/mainboard/google/poppy/variants/soraka/gpio.c +++ b/src/mainboard/google/poppy/variants/soraka/gpio.c @@ -143,7 +143,7 @@ static const struct pad_config gpio_table[] = { /* C10 : UART0_RTS# ==> EC_CAM_PMIC_RST_L */ PAD_CFG_GPO(GPP_C10, 1, DEEP), /* C11 : UART0_CTS# ==> EN_PP3300_DX_CAM */ - PAD_CFG_GPO(GPP_C11, 1, DEEP), + PAD_CFG_GPO(GPP_C11, 0, DEEP), /* C12 : UART1_RXD ==> PCH_MEM_CONFIG[0] */ PAD_CFG_GPI(GPP_C12, NONE, DEEP), /* C13 : UART1_TXD ==> PCH_MEM_CONFIG[1] */ -- cgit v1.2.3