From c5acd90b53f90363ed691a6fd63675af78fea971 Mon Sep 17 00:00:00 2001 From: Greg Watson Date: Thu, 22 Jan 2004 00:45:13 +0000 Subject: try to get memory mapped i/o to work git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1349 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/embeddedplanet/ep405pc/Config.lb | 20 ++++++++++++++++---- src/mainboard/embeddedplanet/ep405pc/init.c | 12 ++++++------ targets/embeddedplanet/ep405pc/Config.lb | 4 +--- 3 files changed, 23 insertions(+), 13 deletions(-) diff --git a/src/mainboard/embeddedplanet/ep405pc/Config.lb b/src/mainboard/embeddedplanet/ep405pc/Config.lb index 5b9669b8fc..38708daac1 100644 --- a/src/mainboard/embeddedplanet/ep405pc/Config.lb +++ b/src/mainboard/embeddedplanet/ep405pc/Config.lb @@ -4,18 +4,30 @@ uses PCIC0_CFGADDR uses PCIC0_CFGDATA -uses UART0_IO_BASE +uses ISA_IO_BASE +uses ISA_MEM_BASE +uses TTYS0_BASE +uses _IO_BASE ## -## Set PCI registers +## Set PCI configuration register addresses ## default PCIC0_CFGADDR=0xeec00000 default PCIC0_CFGDATA=0xeec00004 ## -## Set UART base address +## Set PCI/ISA I/O and memory base address ## -default UART0_IO_BASE=0xef600300 +default ISA_IO_BASE=0xe8000000 +default ISA_MEM_BASE=0x80000000 +default _IO_BASE=ISA_IO_BASE + +## +## HACK ALERT: the UART0 registers are not in the PCI I/O address space +## but both IDE and UART use the same routines for I/O (inb/outb). To get +## around this we set TTYSO_BASE to the difference between the two. +## +default TTYS0_BASE=0xef600300-ISA_IO_BASE ## ## Early board initialization, called from ppc_main() diff --git a/src/mainboard/embeddedplanet/ep405pc/init.c b/src/mainboard/embeddedplanet/ep405pc/init.c index 240a392260..2ab248c5c2 100644 --- a/src/mainboard/embeddedplanet/ep405pc/init.c +++ b/src/mainboard/embeddedplanet/ep405pc/init.c @@ -54,21 +54,21 @@ board_init(void) /* * Enable FLASH, NVRAM, POR */ - outb(0x9C, 0xF4000002); + out_8(0x9C, 0xF4000002); /* * Enable UART0 */ - outb(0x20, 0xF4000003); + out_8(0x20, 0xF4000003); /* * Cycle LEDs to show something is happening... */ - outb(0x07, 0xF4000009); + out_8(0x07, 0xF4000009); udelay(100000); - outb(0x0B, 0xF4000009); + out_8(0x0B, 0xF4000009); udelay(100000); - outb(0x0D, 0xF4000009); + out_8(0x0D, 0xF4000009); udelay(100000); - outb(0x0E, 0xF4000009); + out_8(0x0E, 0xF4000009); } diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb index 7f996390a0..790fc9341a 100644 --- a/targets/embeddedplanet/ep405pc/Config.lb +++ b/targets/embeddedplanet/ep405pc/Config.lb @@ -13,8 +13,7 @@ uses CONFIG_CHIP_CONFIGURE uses DEFAULT_CONSOLE_LOGLEVEL uses CONFIG_USE_INIT uses CONFIG_CONSOLE_SERIAL8250 -uses TTYS0_BASE TTYS0_BAUD TTYS0_DIV -uses UART0_IO_BASE +uses TTYS0_BAUD TTYS0_DIV uses NO_POST uses CONFIG_IDE_STREAM uses CONFIG_SYS_CLK_FREQ @@ -51,7 +50,6 @@ option NO_POST=1 ## Enable serial console option DEFAULT_CONSOLE_LOGLEVEL=8 option CONFIG_CONSOLE_SERIAL8250=1 -option TTYS0_BASE={UART0_IO_BASE} # Divisor of 69 == 9600 baud due to weird clocking option TTYS0_DIV=69 option TTYS0_BAUD=9600 -- cgit v1.2.3