From c4986eb7f4eee0f305c6a6f05b45effae152062c Mon Sep 17 00:00:00 2001 From: Subrata Banik Date: Wed, 9 May 2018 14:55:09 +0530 Subject: soc/intel/common/block: Add common chip config block Adding common chip config structure which will be used to return data to common code. When common code requires soc data, code used to fetch entire soc config structure. With this change, common code will only get the data/structure which is required by common code and not entire config. For now, adding i2c, gspi and lockdown configuration which will be used by common code. BUG=none BRANCH=b:78109109 TEST=compile code for APL/SKL/CNL. Boot using SKL/APL/CNL and check values are returned properly using common structure. Change-Id: I7f1671e064782397d3ace066a08bf1333192b21a Signed-off-by: Subrata Banik Signed-off-by: Maulik V Vaghela Reviewed-on: https://review.coreboot.org/26189 Reviewed-by: Furquan Shaikh Reviewed-by: Hannah Williams Tested-by: build bot (Jenkins) --- src/mainboard/google/chell/devicetree.cb | 4 +- src/mainboard/google/eve/devicetree.cb | 75 +++++++----- src/mainboard/google/fizz/devicetree.cb | 40 ++++--- src/mainboard/google/glados/devicetree.cb | 4 +- src/mainboard/google/lars/devicetree.cb | 4 +- .../octopus/variants/baseboard/devicetree.cb | 73 ++++++------ .../google/octopus/variants/bip/devicetree.cb | 73 ++++++------ .../google/poppy/variants/atlas/devicetree.cb | 84 +++++++------ .../google/poppy/variants/baseboard/devicetree.cb | 111 +++++++++-------- .../google/poppy/variants/nami/devicetree.cb | 100 +++++++++------- .../google/poppy/variants/nautilus/devicetree.cb | 132 ++++++++++++--------- .../google/poppy/variants/nocturne/devicetree.cb | 95 ++++++++------- .../google/poppy/variants/soraka/devicetree.cb | 113 ++++++++++-------- .../google/reef/variants/baseboard/devicetree.cb | 73 ++++++------ .../google/reef/variants/coral/devicetree.cb | 73 ++++++------ .../google/reef/variants/pyro/devicetree.cb | 58 ++++----- .../google/reef/variants/sand/devicetree.cb | 71 +++++------ .../google/reef/variants/snappy/devicetree.cb | 71 +++++------ .../zoombini/variants/baseboard/devicetree.cb | 19 ++- .../google/zoombini/variants/meowth/devicetree.cb | 32 +++-- .../cannonlake_rvp/variants/cnl_u/devicetree.cb | 19 ++- .../intel/glkrvp/variants/baseboard/devicetree.cb | 17 ++- .../intel/kblrvp/variants/rvp3/devicetree.cb | 4 +- .../intel/kblrvp/variants/rvp7/devicetree.cb | 4 +- src/mainboard/intel/kunimitsu/devicetree.cb | 4 +- .../librem_skl/variants/librem13v2/devicetree.cb | 4 +- .../librem_skl/variants/librem15v3/devicetree.cb | 4 +- .../siemens/mc_apl1/variants/mc_apl1/devicetree.cb | 13 +- src/soc/intel/apollolake/Kconfig | 5 + src/soc/intel/apollolake/chip.h | 10 +- src/soc/intel/apollolake/gspi.c | 15 +-- src/soc/intel/apollolake/i2c.c | 15 +-- src/soc/intel/apollolake/include/soc/soc_chip.h | 21 ++++ src/soc/intel/cannonlake/Kconfig | 5 + src/soc/intel/cannonlake/Makefile.inc | 1 + src/soc/intel/cannonlake/chip.h | 16 +-- src/soc/intel/cannonlake/gspi.c | 16 +-- src/soc/intel/cannonlake/i2c.c | 15 +-- src/soc/intel/cannonlake/include/soc/soc_chip.h | 21 ++++ src/soc/intel/cannonlake/lockdown.c | 24 ++-- src/soc/intel/common/block/chip/Kconfig | 4 + src/soc/intel/common/block/chip/Makefile.inc | 10 ++ src/soc/intel/common/block/chip/chip.c | 34 ++++++ .../intel/common/block/include/intelblocks/chip.h | 41 +++++++ src/soc/intel/skylake/Kconfig | 5 + src/soc/intel/skylake/chip.c | 12 +- src/soc/intel/skylake/chip.h | 25 ++-- src/soc/intel/skylake/chip_fsp20.c | 12 +- src/soc/intel/skylake/gspi.c | 16 +-- src/soc/intel/skylake/i2c.c | 15 +-- src/soc/intel/skylake/include/soc/soc_chip.h | 21 ++++ src/soc/intel/skylake/lockdown.c | 21 ++-- 52 files changed, 1021 insertions(+), 733 deletions(-) create mode 100644 src/soc/intel/apollolake/include/soc/soc_chip.h create mode 100644 src/soc/intel/cannonlake/include/soc/soc_chip.h create mode 100644 src/soc/intel/common/block/chip/Kconfig create mode 100644 src/soc/intel/common/block/chip/Makefile.inc create mode 100644 src/soc/intel/common/block/chip/chip.c create mode 100644 src/soc/intel/common/block/include/intelblocks/chip.h create mode 100644 src/soc/intel/skylake/include/soc/soc_chip.h diff --git a/src/mainboard/google/chell/devicetree.cb b/src/mainboard/google/chell/devicetree.cb index fa1fde4d94..4ad8036cfa 100644 --- a/src/mainboard/google/chell/devicetree.cb +++ b/src/mainboard/google/chell/devicetree.cb @@ -189,7 +189,9 @@ chip soc/intel/skylake register "SendVrMbxCmd" = "1" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/google/eve/devicetree.cb b/src/mainboard/google/eve/devicetree.cb index fa12d8b06d..a812c0814f 100644 --- a/src/mainboard/google/eve/devicetree.cb +++ b/src/mainboard/google/eve/devicetree.cb @@ -169,46 +169,60 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | Early TPM access | + #| I2C2 | Touchpad | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST_PLUS, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 112, + .fall_time_ns = 34, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 186, + .scl_hcnt = 93, + .sda_hold = 36, + } + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 176, + .scl_hcnt = 95, + .sda_hold = 36, + } + }, + }" + # Touchscreen register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST_PLUS, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" # Enable I2C1 bus early for TPM access register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" - register "i2c[1]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 112, - .fall_time_ns = 34, - }" # Touchpad register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 186, - .scl_hcnt = 93, - .sda_hold = 36, - } - }" # Audio register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 176, - .scl_hcnt = 95, - .sda_hold = 36, - } - }" # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ @@ -230,9 +244,6 @@ chip soc/intel/skylake register "tdp_pl2_override" = "15" register "tcc_offset" = "10" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - device cpu_cluster 0 on device lapic 0 on end end diff --git a/src/mainboard/google/fizz/devicetree.cb b/src/mainboard/google/fizz/devicetree.cb index 6418c7ddc1..67828d1ffd 100644 --- a/src/mainboard/google/fizz/devicetree.cb +++ b/src/mainboard/google/fizz/devicetree.cb @@ -275,21 +275,32 @@ chip soc/intel/skylake register "i2c_voltage[2]" = "I2C_VOLTAGE_3V3" # Debug register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" # Audio - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, - }" + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C5 | Audio | + #+-------------------+---------------------------+ - # audio - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[5] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 194, - .scl_hcnt = 100, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 194, + .scl_hcnt = 100, + .sda_hold = 36, + }, }, }" @@ -316,9 +327,6 @@ chip soc/intel/skylake # Use default SD card detect GPIO configuration register "sdcard_cd_gpio_default" = "GPP_A7" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - device cpu_cluster 0 on device lapic 0 on end end diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb index 19c9beb7f4..386e3dbb6d 100644 --- a/src/mainboard/google/glados/devicetree.cb +++ b/src/mainboard/google/glados/devicetree.cb @@ -187,7 +187,9 @@ chip soc/intel/skylake register "SendVrMbxCmd" = "1" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/google/lars/devicetree.cb b/src/mainboard/google/lars/devicetree.cb index c860569c9b..6bb460ae3c 100644 --- a/src/mainboard/google/lars/devicetree.cb +++ b/src/mainboard/google/lars/devicetree.cb @@ -184,7 +184,9 @@ chip soc/intel/skylake register "SendVrMbxCmd" = "2" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb index 1411a7c13d..9bd51ca35c 100644 --- a/src/mainboard/google/octopus/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/octopus/variants/baseboard/devicetree.cb @@ -54,40 +54,45 @@ chip soc/intel/apollolake register "hdaudio_pwr_gate_enable" = "1" register "hdaudio_bios_config_lockdown" = "1" - # digitizer at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, - }" - - # Enable I2C5 for audio codec at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # trackpad at 400kHz - register "i2c[6]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 114, - .fall_time_ns = 164, - .data_hold_time_ns = 350, - }" - - # touchscreen at 400kHz - register "i2c[7]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Digitizer | + #| I2C5 | Audio | + #| I2C6 | Trackpad | + #| I2C7 | Touchscreen | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[6] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[7] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, }" register "pnp_settings" = "PNP_PERF_POWER" diff --git a/src/mainboard/google/octopus/variants/bip/devicetree.cb b/src/mainboard/google/octopus/variants/bip/devicetree.cb index 277cb764f0..339b5bfcb1 100644 --- a/src/mainboard/google/octopus/variants/bip/devicetree.cb +++ b/src/mainboard/google/octopus/variants/bip/devicetree.cb @@ -54,40 +54,45 @@ chip soc/intel/apollolake register "hdaudio_pwr_gate_enable" = "1" register "hdaudio_bios_config_lockdown" = "1" - # digitizer at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, - }" - - # Enable I2C5 for audio codec at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # trackpad at 400kHz - register "i2c[6]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 114, - .fall_time_ns = 164, - .data_hold_time_ns = 350, - }" - - # touchscreen at 400kHz - register "i2c[7]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Digitizer | + #| I2C5 | Audio | + #| I2C6 | Trackpad | + #| I2C7 | Touchscreen | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[6] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[7] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, }" register "pnp_settings" = "PNP_PERF_POWER" diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb index 64e7113adc..7742a83485 100644 --- a/src/mainboard/google/poppy/variants/atlas/devicetree.cb +++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb @@ -66,7 +66,6 @@ chip soc/intel/skylake register "psys_pmax" = "45" register "tcc_offset" = "10" register "pch_trip_temp" = "75" - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" register "pirqa_routing" = "PCH_IRQ11" register "pirqb_routing" = "PCH_IRQ10" @@ -175,51 +174,66 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Touchscreen | + #| I2C2 | Trackpad | + #| I2C3 | Camera | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 186, + .scl_hcnt = 93, + .sda_hold = 36, + }, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 176, + .scl_hcnt = 95, + .sda_hold = 36, + } + }, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" # Touchscreen register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" # Trackpad register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 186, - .scl_hcnt = 93, - .sda_hold = 36, - }, - }" # Camera register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" # Audio register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 176, - .scl_hcnt = 95, - .sda_hold = 36, - } - }" - - # GSPI0 for cr50 TPM - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, - }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb index 8ea5c2da2b..6fe949ffc2 100644 --- a/src/mainboard/google/poppy/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/poppy/variants/baseboard/devicetree.cb @@ -170,71 +170,85 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty - # Touchscreen - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | H1 | + #| I2C2 | Camera | + #| I2C3 | Pen | + #| I2C4 | Camera | + #| I2C5 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 90, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 90, + .sda_hold = 36, + }, }, - }" - - # H1 - register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" - register "i2c[1]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + .early_init = 1, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 97, + .sda_hold = 36, + }, + }, + .i2c[4] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 100, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 97, + .sda_hold = 36, + }, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 98, + .sda_hold = 36, + }, }, - .early_init = 1, }" + # Touchscreen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + + # H1 + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # Camera register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 97, - .sda_hold = 36, - }, - }" # Pen register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" # Camera register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 97, - .sda_hold = 36, - }, - }" # Audio register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 98, - .sda_hold = 36, - }, - }" - # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ @@ -260,9 +274,6 @@ chip soc/intel/skylake # Use default SD card detect GPIO configuration register "sdcard_cd_gpio_default" = "GPP_E15" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - # PCH Trip Temperature in degree C register "pch_trip_temp" = "75" diff --git a/src/mainboard/google/poppy/variants/nami/devicetree.cb b/src/mainboard/google/poppy/variants/nami/devicetree.cb index 0c4a8e8802..fdbe6ffc75 100644 --- a/src/mainboard/google/poppy/variants/nami/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nami/devicetree.cb @@ -196,58 +196,73 @@ chip soc/intel/skylake # Touchscreen register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Trackpad register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" - register "i2c[1]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Pen register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 100, - .sda_hold = 36, - }, - }" # Audio register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Touchscreen | + #| I2C1 | Trackpad | + #| I2C2 | Pen | + #| I2C3 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 195, - .scl_hcnt = 90, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 90, + .sda_hold = 36, + }, + .early_init = 1, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 195, + .scl_hcnt = 90, + .sda_hold = 36, + }, }, - }" - - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, }" # Must leave UART0 enabled or SD/eMMC will not work as PCI @@ -270,9 +285,6 @@ chip soc/intel/skylake register "tcc_offset" = "10" # TCC of 90C register "psys_pmax" = "101" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - # PCH Trip Temperature in degree C register "pch_trip_temp" = "75" diff --git a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb index 7cf764e755..39d7353f58 100644 --- a/src/mainboard/google/poppy/variants/nautilus/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nautilus/devicetree.cb @@ -179,80 +179,97 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty - # Touchscreen - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C2 | Trackpad | + #| I2C3 | Pen | + #| I2C4 | Camera | + #| I2C5 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 180, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + .i2c[3] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 180, - .scl_hcnt = 90, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 185, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 100, + .sda_hold = 36, + }, }, }" + # Touch Screen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + # H1 register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" - # Configure I2C1 for cr50 TPM. Early init is required to set up a BAR - # for TPM communication before memory is up. - register "i2c[1]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Trackpad register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 100, - .sda_hold = 36, - }, - }" # Pen register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 185, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Camera register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 100, - .sda_hold = 36, - }, - }" # Audio register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 100, - .sda_hold = 36, - }, - }" # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ @@ -278,9 +295,6 @@ chip soc/intel/skylake # Use default SD card detect GPIO configuration register "sdcard_cd_gpio_default" = "GPP_E15" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - # PCH Trip Temperature in degree C register "pch_trip_temp" = "75" diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb index 78edcc9faf..5b4c924296 100644 --- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb @@ -66,7 +66,6 @@ chip soc/intel/skylake register "psys_pmax" = "45" register "tcc_offset" = "10" register "pch_trip_temp" = "75" - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" register "pirqa_routing" = "PCH_IRQ11" register "pirqb_routing" = "PCH_IRQ10" @@ -176,59 +175,75 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Empty register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Touchscreen | + #| I2C1 | Trackpad | + #| I2C3 | Camera | + #| I2C4 | Audio | + #| I2C5 | Rear Camera & SAR | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 186, + .scl_hcnt = 93, + .sda_hold = 36, + }, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 176, + .scl_hcnt = 95, + .sda_hold = 36, + } + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" # Touchscreen register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" # Trackpad register "i2c_voltage[1]" = "I2C_VOLTAGE_1V8" - register "i2c[1]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 186, - .scl_hcnt = 93, - .sda_hold = 36, - }, - }" # Front Camera register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8" - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" # Audio register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 176, - .scl_hcnt = 95, - .sda_hold = 36, - } - }" # Rear Camera & SAR register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" - - # GSPI0 for cr50 TPM - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, - }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/poppy/variants/soraka/devicetree.cb b/src/mainboard/google/poppy/variants/soraka/devicetree.cb index af962881d8..762955df44 100644 --- a/src/mainboard/google/poppy/variants/soraka/devicetree.cb +++ b/src/mainboard/google/poppy/variants/soraka/devicetree.cb @@ -170,68 +170,86 @@ chip soc/intel/skylake register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty - # Touchscreen - register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C0 | Touchscreen | + #| I2C1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C2 | Camera | + #| I2C4 | Camera | + #| I2C5 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 180, + .scl_hcnt = 85, + .sda_hold = 36, + }, + }, + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 192, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 90, + .sda_hold = 36, + }, + }, + .i2c[5] = { .speed = I2C_SPEED_FAST, - .scl_lcnt = 180, - .scl_hcnt = 85, - .sda_hold = 36, + .speed_config[0] = { + .speed = I2C_SPEED_FAST, + .scl_lcnt = 190, + .scl_hcnt = 90, + .sda_hold = 36, + }, }, }" + # Touchscreen + register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3" + # H1 - register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # Configure I2C1 for cr50 TPM. Early init is required to set up a BAR # for TPM communication before memory is up. - register "i2c[1]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" + register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3" # Camera register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8" - register "i2c[2]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 192, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Camera register "i2c_voltage[4]" = "I2C_VOLTAGE_1V8" - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Audio register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8" - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .speed_config[0] = { - .speed = I2C_SPEED_FAST, - .scl_lcnt = 190, - .scl_hcnt = 90, - .sda_hold = 36, - }, - }" # Must leave UART0 enabled or SD/eMMC will not work as PCI register "SerialIoDevMode" = "{ @@ -257,9 +275,6 @@ chip soc/intel/skylake # Use default SD card detect GPIO configuration register "sdcard_cd_gpio_default" = "GPP_E15" - # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" - # PCH Trip Temperature in degree C register "pch_trip_temp" = "75" diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb index da47d42d32..da842ba6e6 100644 --- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb @@ -76,41 +76,44 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 57, - .fall_time_ns = 28, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 114, - .fall_time_ns = 164, - .data_hold_time_ns = 350, - }" - - # digitizer at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C2 | TPM | + #| I2C3 | Touchscreen | + #| I2C4 | Trackpad | + #| I2C5 | Digitizer | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 57, + .fall_time_ns = 28, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/google/reef/variants/coral/devicetree.cb b/src/mainboard/google/reef/variants/coral/devicetree.cb index c1b7067711..1608343d3c 100644 --- a/src/mainboard/google/reef/variants/coral/devicetree.cb +++ b/src/mainboard/google/reef/variants/coral/devicetree.cb @@ -76,41 +76,44 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 57, - .fall_time_ns = 28, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 114, - .fall_time_ns = 164, - .data_hold_time_ns = 350, - }" - - # digitizer at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C2 | TPM | + #| I2C3 | Touchscreen | + #| I2C4 | Trackpad | + #| I2C5 | Digitizer | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 57, + .fall_time_ns = 28, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + .data_hold_time_ns = 350, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb index cb297d9dce..c2d67aa17e 100644 --- a/src/mainboard/google/reef/variants/pyro/devicetree.cb +++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb @@ -76,33 +76,37 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 50, - .fall_time_ns = 23, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 90, - .fall_time_ns = 164, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C2 | TPM | + #| I2C3 | Touchscreen | + #| I2C4 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 50, + .fall_time_ns = 23, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 90, + .fall_time_ns = 164, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/google/reef/variants/sand/devicetree.cb b/src/mainboard/google/reef/variants/sand/devicetree.cb index 16889bb8c9..68f33ae074 100644 --- a/src/mainboard/google/reef/variants/sand/devicetree.cb +++ b/src/mainboard/google/reef/variants/sand/devicetree.cb @@ -73,40 +73,43 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 57, - .fall_time_ns = 28, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 76, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 114, - .fall_time_ns = 164, - }" - - # digitizer at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C2 | TPM | + #| I2C3 | Touchscreen | + #| I2C4 | Trackpad | + #| I2C5 | Digitizer | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 57, + .fall_time_ns = 28, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 76, + .fall_time_ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 114, + .fall_time_ns = 164, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/google/reef/variants/snappy/devicetree.cb b/src/mainboard/google/reef/variants/snappy/devicetree.cb index 9719368080..aaf61de6ae 100644 --- a/src/mainboard/google/reef/variants/snappy/devicetree.cb +++ b/src/mainboard/google/reef/variants/snappy/devicetree.cb @@ -76,40 +76,43 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_63_32" register "gpe0_dw3" = "PMC_GPE_SW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 44, - .fall_time_ns = 22, - }" - - # Enable I2C2 bus early for TPM at 400kHz - register "i2c[2]" = "{ - .early_init = 1, - .speed = I2C_SPEED_FAST, - .rise_time_ns = 40, - .fall_time_ns = 20, - }" - - # touchscreen at 400kHz - register "i2c[3]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 70, - .fall_time_ns = 164, - }" - - # trackpad at 400kHz - register "i2c[4]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 20, - .fall_time_ns = 164, - }" - - # digitizer at 400kHz - register "i2c[5]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 152, - .fall_time_ns = 30, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #| I2C2 | TPM | + #| I2C3 | Touchscreen | + #| I2C4 | Trackpad | + #| I2C5 | Digitizer | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 44, + .fall_time_ns = 22, + }, + .i2c[2] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 40, + .fall_time_ns = 20, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 70, + .fall_time_ns = 164, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 20, + .fall_time_ns = 164, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 152, + .fall_time_ns = 30, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb b/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb index 6f70dfba2a..479f28015a 100644 --- a/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/zoombini/variants/baseboard/devicetree.cb @@ -25,11 +25,20 @@ chip soc/intel/cannonlake register "ScsEmmcHs400Enabled" = "1" register "ScsSdCardEnabled" = "1" - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, }" register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC0)" diff --git a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb index 7d89b78e8b..adeedea701 100644 --- a/src/mainboard/google/zoombini/variants/meowth/devicetree.cb +++ b/src/mainboard/google/zoombini/variants/meowth/devicetree.cb @@ -34,11 +34,26 @@ chip soc/intel/cannonlake register "ScsEmmcHs400Enabled" = "1" register "ScsSdCardEnabled" = "1" - # Use GSPI0 for cr50 TPM. Early init is required to set up a BAR for TPM - # communication before memory is up. - register "gspi[0]" = "{ - .speed_mhz = 1, - .early_init = 1, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI0 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| | before memory is up | + #| I2C0 | Touchscreen Digitizer | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + .i2c[0] = { + .speed = I2C_SPEED_FAST_PLUS, + .rise_time_ns = 98, + .fall_time_ns = 38, + }, }" register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC2)" @@ -55,13 +70,6 @@ chip soc/intel/cannonlake register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" - # Touchscreen Digitizer - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST_PLUS, - .rise_time_ns = 98, - .fall_time_ns = 38, - }" - register "PchHdaDspEnable" = "1" register "PchHdaAudioLinkSsp0" = "1" register "PchHdaAudioLinkSsp1" = "1" diff --git a/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb b/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb index d5d806c91e..6bd90a55ac 100644 --- a/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb +++ b/src/mainboard/intel/cannonlake_rvp/variants/cnl_u/devicetree.cb @@ -72,11 +72,20 @@ chip soc/intel/cannonlake # Enable S0ix register "s0ix_enable" = "1" - # Audio - register "i2c[3]" = "{ - .speed = I2C_SPEED_STANDARD, - .rise_time_ns = 104, - .fall_time_ns = 52, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT | + #| I2C3 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[3] = { + .speed = I2C_SPEED_STANDARD, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, }" device domain 0 on diff --git a/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb b/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb index 70b28bb62c..d3d0b00c8e 100644 --- a/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb +++ b/src/mainboard/intel/glkrvp/variants/baseboard/devicetree.cb @@ -80,11 +80,18 @@ chip soc/intel/apollolake register "gpe0_dw2" = "PMC_GPE_N_95_64" register "gpe0_dw3" = "PMC_GPE_NW_31_0" - # Enable I2C0 for audio codec at 400kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_FAST, - .rise_time_ns = 104, - .fall_time_ns = 52, + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 104, + .fall_time_ns = 52, + }, }" # Minimum SLP S3 assertion width 28ms. diff --git a/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb index 8751255076..1f5d1a7124 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp3/devicetree.cb @@ -214,7 +214,9 @@ chip soc/intel/skylake register "VmxEnable" = "0" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb index f07d38199f..efcf9be3b8 100644 --- a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb +++ b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb @@ -209,7 +209,9 @@ chip soc/intel/skylake register "sdcard_cd_gpio_default" = "GPP_G5" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/intel/kunimitsu/devicetree.cb b/src/mainboard/intel/kunimitsu/devicetree.cb index 44aa325bff..ffa259b7f6 100644 --- a/src/mainboard/intel/kunimitsu/devicetree.cb +++ b/src/mainboard/intel/kunimitsu/devicetree.cb @@ -193,7 +193,9 @@ chip soc/intel/skylake register "sdcard_cd_gpio_default" = "GPP_A7" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb index 5f61d346a8..18dffcf2b5 100644 --- a/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb +++ b/src/mainboard/purism/librem_skl/variants/librem13v2/devicetree.cb @@ -179,7 +179,9 @@ chip soc/intel/skylake register "SendVrMbxCmd" = "2" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb b/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb index 520736ced1..01445dcb8f 100644 --- a/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb +++ b/src/mainboard/purism/librem_skl/variants/librem15v3/devicetree.cb @@ -186,7 +186,9 @@ chip soc/intel/skylake register "SendVrMbxCmd" = "2" # Lock Down - register "chipset_lockdown" = "CHIPSET_LOCKDOWN_COREBOOT" + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + }" device cpu_cluster 0 on device lapic 0 on end diff --git a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/devicetree.cb b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/devicetree.cb index c1ef76b649..4d9c655434 100644 --- a/src/mainboard/siemens/mc_apl1/variants/mc_apl1/devicetree.cb +++ b/src/mainboard/siemens/mc_apl1/variants/mc_apl1/devicetree.cb @@ -43,9 +43,16 @@ chip soc/intel/apollolake # [6:0] steps of delay for HS200, each 125ps. register "emmc_rx_cmd_data_cntl2" = "0x10008" - # Enable I2C0 for proximity sensor at 100kHz - register "i2c[0]" = "{ - .speed = I2C_SPEED_STANDARD + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Proximity Sensor | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_STANDARD + }, }" device domain 0 on diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index 371d0c4cb6..42ff3bdf39 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -70,6 +70,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK select SOC_INTEL_COMMON_BLOCK_ACPI + select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_DSP select SOC_INTEL_COMMON_BLOCK_FAST_SPI @@ -392,6 +393,10 @@ config SOC_INTEL_COMMON_BLOCK_GSPI_MAX int default 3 +config SOC_INTEL_I2C_DEV_MAX + int + default 8 + # Don't include the early page tables in RW_A or RW_B cbfs regions config RO_REGION_ONLY string diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h index af465df111..4f586acfd1 100644 --- a/src/soc/intel/apollolake/chip.h +++ b/src/soc/intel/apollolake/chip.h @@ -20,6 +20,7 @@ #define _SOC_APOLLOLAKE_CHIP_H_ #include +#include #include #include #include @@ -31,7 +32,6 @@ #define MAX_PCIE_PORTS 6 #define CLKREQ_DISABLED 0xf -#define APOLLOLAKE_I2C_DEV_MAX 8 enum pnp_settings { PNP_PERF, @@ -40,8 +40,9 @@ enum pnp_settings { }; struct soc_intel_apollolake_config { - /* GSPI */ - struct gspi_cfg gspi[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + + /* Common structure containing soc config data required by common code*/ + struct soc_intel_common_config common_soc_config; /* * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has @@ -98,9 +99,6 @@ struct soc_intel_apollolake_config { /* Configure serial IRQ (SERIRQ) line. */ enum serirq_mode serirq_mode; - /* I2C bus configuration */ - struct dw_i2c_bus_config i2c[APOLLOLAKE_I2C_DEV_MAX]; - uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */ uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */ uint8_t gpe0_dw3; /* GPE0_127_96 STS/EN */ diff --git a/src/soc/intel/apollolake/gspi.c b/src/soc/intel/apollolake/gspi.c index 6d5f8e59dc..af32ebd5a0 100644 --- a/src/soc/intel/apollolake/gspi.c +++ b/src/soc/intel/apollolake/gspi.c @@ -24,19 +24,10 @@ const struct gspi_cfg *gspi_get_soc_cfg(void) { - DEVTREE_CONST struct soc_intel_apollolake_config *config; - int devfn = SA_DEVFN_ROOT; - DEVTREE_CONST struct device *dev = dev_find_slot(0, devfn); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->gspi[0]; + return &common_config->gspi[0]; } uintptr_t gspi_get_soc_early_base(void) diff --git a/src/soc/intel/apollolake/i2c.c b/src/soc/intel/apollolake/i2c.c index 3df333c869..bb14df2a0e 100644 --- a/src/soc/intel/apollolake/i2c.c +++ b/src/soc/intel/apollolake/i2c.c @@ -17,24 +17,17 @@ #include #include #include +#include #include #include #include "chip.h" const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus) { - const struct soc_intel_apollolake_config *config; - const struct device *dev = dev_find_slot(0, SA_DEVFN_ROOT); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->i2c[bus]; + return &common_config->i2c[bus]; } uintptr_t dw_i2c_get_soc_early_base(unsigned int bus) diff --git a/src/soc/intel/apollolake/include/soc/soc_chip.h b/src/soc/intel/apollolake/include/soc/soc_chip.h new file mode 100644 index 0000000000..fa53a15906 --- /dev/null +++ b/src/soc/intel/apollolake/include/soc/soc_chip.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_APOLLOLAKE_SOC_CHIP_H_ +#define _SOC_APOLLOLAKE_SOC_CHIP_H_ + +#include "../../chip.h" + +#endif /* _SOC_APOLLOLAKE_SOC_CHIP_H_ */ diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index f50d9f2bd6..5d8883bc9c 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -46,6 +46,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK select SOC_INTEL_COMMON_BLOCK_ACPI + select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 @@ -188,6 +189,10 @@ config SOC_INTEL_COMMON_BLOCK_GSPI_MAX int default 3 +config SOC_INTEL_I2C_DEV_MAX + int + default 6 + # Clock divider parameters for 115200 baud rate config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL hex diff --git a/src/soc/intel/cannonlake/Makefile.inc b/src/soc/intel/cannonlake/Makefile.inc index 47f06aa47d..86f147d0c3 100644 --- a/src/soc/intel/cannonlake/Makefile.inc +++ b/src/soc/intel/cannonlake/Makefile.inc @@ -41,6 +41,7 @@ ramstage-y += graphics.c ramstage-y += gspi.c ramstage-y += gpio.c ramstage-y += i2c.c +ramstage-y += lockdown.c ramstage-y += lpc.c ramstage-y += memmap.c ramstage-y += nhlt.c diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h index d943f9c781..a269659f12 100644 --- a/src/soc/intel/cannonlake/chip.h +++ b/src/soc/intel/cannonlake/chip.h @@ -18,6 +18,7 @@ #ifndef _SOC_CHIP_H_ #define _SOC_CHIP_H_ +#include #include #include #include @@ -30,11 +31,10 @@ #include #include -#define CANNONLAKE_I2C_DEV_MAX 6 - struct soc_intel_cannonlake_config { - /* GSPI */ - struct gspi_cfg gspi[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + + /* Common struct containing soc config data required by common code */ + struct soc_intel_common_config common_soc_config; /* Interrupt Routing configuration. * If bit7 is 1, the interrupt is disabled. */ @@ -201,11 +201,6 @@ struct soc_intel_cannonlake_config { uint8_t TcoIrqSelect; uint8_t TcoIrqEnable; - enum { - CHIPSET_LOCKDOWN_FSP = 0, /* FSP handles locking per UPDs */ - CHIPSET_LOCKDOWN_COREBOOT, /* coreboot handles locking */ - } chipset_lockdown; - /* * Option for mainboard to skip coreboot MP initialization * 0 = Make use of coreboot MP Init @@ -281,9 +276,6 @@ struct soc_intel_cannonlake_config { /* GPIO SD card detect pin */ unsigned int sdcard_cd_gpio; - /* I2C bus configuration */ - struct dw_i2c_bus_config i2c[CANNONLAKE_I2C_DEV_MAX]; - /* Enable Pch iSCLK */ uint8_t pch_isclk; diff --git a/src/soc/intel/cannonlake/gspi.c b/src/soc/intel/cannonlake/gspi.c index e4f682db42..4b00f3a0f8 100644 --- a/src/soc/intel/cannonlake/gspi.c +++ b/src/soc/intel/cannonlake/gspi.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -24,19 +25,10 @@ const struct gspi_cfg *gspi_get_soc_cfg(void) { - DEVTREE_CONST struct soc_intel_cannonlake_config *config; - int devfn = SA_DEVFN_ROOT; - DEVTREE_CONST struct device *dev = dev_find_slot(0, devfn); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->gspi[0]; + return &common_config->gspi[0]; } uintptr_t gspi_get_soc_early_base(void) diff --git a/src/soc/intel/cannonlake/i2c.c b/src/soc/intel/cannonlake/i2c.c index ef3034537f..b53d5a0c1c 100644 --- a/src/soc/intel/cannonlake/i2c.c +++ b/src/soc/intel/cannonlake/i2c.c @@ -18,24 +18,17 @@ #include #include #include +#include #include #include #include "chip.h" const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus) { - const struct soc_intel_cannonlake_config *config; - const struct device *dev = dev_find_slot(0, SA_DEVFN_ROOT); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->i2c[bus]; + return &common_config->i2c[bus]; } uintptr_t dw_i2c_get_soc_early_base(unsigned int bus) diff --git a/src/soc/intel/cannonlake/include/soc/soc_chip.h b/src/soc/intel/cannonlake/include/soc/soc_chip.h new file mode 100644 index 0000000000..3d6f232530 --- /dev/null +++ b/src/soc/intel/cannonlake/include/soc/soc_chip.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_CANNONLAKE_SOC_CHIP_H_ +#define _SOC_CANNONLAKE_SOC_CHIP_H_ + +#include "../../chip.h" + +#endif /* _SOC_CANNONLAKE_SOC_CHIP_H_ */ diff --git a/src/soc/intel/cannonlake/lockdown.c b/src/soc/intel/cannonlake/lockdown.c index 7a3b0c0130..1f1e654636 100644 --- a/src/soc/intel/cannonlake/lockdown.c +++ b/src/soc/intel/cannonlake/lockdown.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -27,15 +28,15 @@ #define PCR_DMI_GCS 0x274C #define PCR_DMI_GCS_BILD (1 << 0) -static void pmc_lockdown_cfg(const struct soc_intel_cannonlake_config *config) +static void pmc_lockdown_cfg(const struct soc_intel_common_config *config) { - uint8_t *pmcbase; + uint8_t *pmcbase, reg8; uint32_t reg32, pmsyncreg; /* PMSYNC */ pmcbase = pmc_mmio_regs(); pmsyncreg = read32(pmcbase + PMSYNC_TPR_CFG); - pmsyncreg |= PMSYNC_LOCK; + pmsyncreg |= PCH2CPU_TPR_CFG_LOCK; write32(pmcbase + PMSYNC_TPR_CFG, pmsyncreg); /* Lock down ABASE and sleep stretching policy */ @@ -66,7 +67,7 @@ static void dmi_lockdown_cfg(void) pcr_or8(PID_DMI, PCR_DMI_GCS, PCR_DMI_GCS_BILD); } -static void spi_lockdown_cfg(const struct soc_intel_cannonlake_config *config) +static void fast_spi_lockdown_cfg(const struct soc_intel_common_config *config) { /* Set FAST_SPI opcode menu */ fast_spi_set_opcode_menu(); @@ -89,24 +90,17 @@ static void spi_lockdown_cfg(const struct soc_intel_cannonlake_config *config) static void platform_lockdown_config(void *unused) { - struct soc_intel_cannonlake_config *config; - struct device *dev; - - dev = PCH_DEV_SPI; - /* Check if device is valid, else return */ - if (dev == NULL || dev->chip_info == NULL) - return; - - config = dev->chip_info; + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); /* SPI lock down configuration */ - spi_lockdown_cfg(config); + fast_spi_lockdown_cfg(common_config); /* DMI lock down configuration */ dmi_lockdown_cfg(); /* PMC lock down configuration */ - pmc_lockdown_cfg(config); + pmc_lockdown_cfg(common_config); } BOOT_STATE_INIT_ENTRY(BS_DEV_RESOURCES, BS_ON_EXIT, platform_lockdown_config, diff --git a/src/soc/intel/common/block/chip/Kconfig b/src/soc/intel/common/block/chip/Kconfig new file mode 100644 index 0000000000..273d0885e8 --- /dev/null +++ b/src/soc/intel/common/block/chip/Kconfig @@ -0,0 +1,4 @@ +config SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG + bool + help + Intel Processor common soc/ chip configuration support diff --git a/src/soc/intel/common/block/chip/Makefile.inc b/src/soc/intel/common/block/chip/Makefile.inc new file mode 100644 index 0000000000..425d5a24c8 --- /dev/null +++ b/src/soc/intel/common/block/chip/Makefile.inc @@ -0,0 +1,10 @@ +ifeq ($(CONFIG_SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG),y) + +bootblock-y += chip.c +romstage-y += chip.c +verstage-y += chip.c +ramstage-y += chip.c +smm-y += chip.c +postcar-y += chip.c + +endif diff --git a/src/soc/intel/common/block/chip/chip.c b/src/soc/intel/common/block/chip/chip.c new file mode 100644 index 0000000000..cfec4eca39 --- /dev/null +++ b/src/soc/intel/common/block/chip/chip.c @@ -0,0 +1,34 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +const struct soc_intel_common_config *chip_get_common_soc_structure(void) +{ + const struct soc_intel_common_config *soc_config; + const config_t *config; + int devfn = SA_DEVFN_ROOT; + const struct device *dev = dev_find_slot(0, devfn); + + if (!dev || !dev->chip_info) + die("Could not find SA_DEV_ROOT devicetree config!\n"); + + config = dev->chip_info; + soc_config = &config->common_soc_config; + + return soc_config; +} diff --git a/src/soc/intel/common/block/include/intelblocks/chip.h b/src/soc/intel/common/block/include/intelblocks/chip.h new file mode 100644 index 0000000000..555bdaa893 --- /dev/null +++ b/src/soc/intel/common/block/include/intelblocks/chip.h @@ -0,0 +1,41 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef SOC_INTEL_COMMON_BLOCK_CHIP_H +#define SOC_INTEL_COMMON_BLOCK_CHIP_H + +#include +#include + +enum { + CHIPSET_LOCKDOWN_FSP = 0, /* FSP handles locking per UPDs */ + CHIPSET_LOCKDOWN_COREBOOT, /* coreboot handles locking */ +}; + +/* + * This structure will hold data required by common blocks. + * These are soc specific configurations which will be filled by soc. + * We'll fill this structure once during init and use the data in common block. + */ +struct soc_intel_common_config { + int chipset_lockdown; + struct gspi_cfg gspi[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + struct dw_i2c_bus_config i2c[CONFIG_SOC_INTEL_I2C_DEV_MAX]; +}; + +/* This function to retrieve soc config structure required by common code */ +const struct soc_intel_common_config *chip_get_common_soc_structure(void); + +#endif /* SOC_INTEL_COMMON_BLOCK_CHIP_H */ diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index bfaa19f5d6..13b18dc151 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -56,6 +56,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK + select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT select SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS @@ -329,6 +330,10 @@ config SOC_INTEL_COMMON_BLOCK_GSPI_MAX int default 2 +config SOC_INTEL_I2C_DEV_MAX + int + default 6 + config CPU_BCLK_MHZ int default 100 diff --git a/src/soc/intel/skylake/chip.c b/src/soc/intel/skylake/chip.c index 9fe19d8f9b..466db0950e 100644 --- a/src/soc/intel/skylake/chip.c +++ b/src/soc/intel/skylake/chip.c @@ -69,6 +69,14 @@ static void soc_enable(struct device *dev) dev->ops = &cpu_bus_ops; } +static int get_lockdown_config(void) +{ + const struct soc_intel_common_config *soc_config; + soc_config = chip_get_common_soc_structure(); + + return soc_config->chipset_lockdown; +} + struct chip_operations soc_intel_skylake_ops = { CHIP_NAME("Intel Skylake") .enable_dev = &soc_enable, @@ -145,7 +153,7 @@ void soc_silicon_init_params(SILICON_INIT_UPD *params) params->SataMode = config->SataMode; params->LockDownConfigGlobalSmi = config->LockDownConfigGlobalSmi; params->LockDownConfigRtcLock = config->LockDownConfigRtcLock; - if (config->chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT) { + if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) { params->LockDownConfigBiosInterface = 0; params->LockDownConfigBiosLock = 0; params->LockDownConfigSpiEiss = 0; @@ -173,7 +181,7 @@ void soc_silicon_init_params(SILICON_INIT_UPD *params) params->SkipMpInit = !config->use_fsp_mp_init; - for (i = 0; i < ARRAY_SIZE(config->i2c); i++) + for (i = 0; i < ARRAY_SIZE(config->i2c_voltage); i++) params->SerialIoI2cVoltage[i] = config->i2c_voltage[i]; /* diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h index 8b98662b1e..3c85ad5a3d 100644 --- a/src/soc/intel/skylake/chip.h +++ b/src/soc/intel/skylake/chip.h @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 coresystems GmbH * Copyright (C) 2014 Google Inc. - * Copyright (C) 2015 Intel Corporation. + * Copyright (C) 2015-2018 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -33,14 +34,16 @@ #include #include -#define SKYLAKE_I2C_DEV_MAX 6 - enum skylake_i2c_voltage { I2C_VOLTAGE_3V3, I2C_VOLTAGE_1V8 }; struct soc_intel_skylake_config { + + /* Common struct containing soc config data required by common code */ + struct soc_intel_common_config common_soc_config; + /* * Interrupt Routing configuration * If bit7 is 1, the interrupt is disabled. @@ -273,11 +276,7 @@ struct soc_intel_skylake_config { /* I2C */ /* Bus voltage level, default is 3.3V */ - enum skylake_i2c_voltage i2c_voltage[SKYLAKE_I2C_DEV_MAX]; - struct dw_i2c_bus_config i2c[SKYLAKE_I2C_DEV_MAX]; - - /* GSPI */ - struct gspi_cfg gspi[CONFIG_SOC_INTEL_COMMON_BLOCK_GSPI_MAX]; + enum skylake_i2c_voltage i2c_voltage[CONFIG_SOC_INTEL_I2C_DEV_MAX]; /* Camera */ u8 Cio2Enable; @@ -544,16 +543,6 @@ struct soc_intel_skylake_config { * 0b - Disabled */ u8 eist_enable; - /* Chipset (LPC and SPI) Lock Down - * 1b - coreboot to handle lockdown - * 0b - FSP to handle lockdown - */ - enum { - /* lock according to binary UPD settings */ - CHIPSET_LOCKDOWN_FSP, - /* coreboot handles locking */ - CHIPSET_LOCKDOWN_COREBOOT, - } chipset_lockdown; /* * Activates VR mailbox command for Intersil VR C-state issues. diff --git a/src/soc/intel/skylake/chip_fsp20.c b/src/soc/intel/skylake/chip_fsp20.c index 227e244224..ebfad667bb 100644 --- a/src/soc/intel/skylake/chip_fsp20.c +++ b/src/soc/intel/skylake/chip_fsp20.c @@ -211,6 +211,14 @@ static void soc_enable(struct device *dev) dev->ops = &cpu_bus_ops; } +static int get_lockdown_config(void) +{ + const struct soc_intel_common_config *soc_config; + soc_config = chip_get_common_soc_structure(); + + return soc_config->chipset_lockdown; +} + struct chip_operations soc_intel_skylake_ops = { CHIP_NAME("Intel 6th Gen") .enable_dev = &soc_enable, @@ -352,7 +360,7 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) * do the changes and then lock it back in coreboot during finalize. */ tconfig->PchSbAccessUnlock = (config->HeciEnabled == 0) ? 1 : 0; - if (config->chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT) { + if (get_lockdown_config() == CHIPSET_LOCKDOWN_COREBOOT) { tconfig->PchLockDownBiosInterface = 0; params->PchLockDownBiosLock = 0; params->PchLockDownSpiEiss = 0; @@ -389,7 +397,7 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) params->CpuConfig.Bits.SkipMpInit = !config->use_fsp_mp_init; - for (i = 0; i < ARRAY_SIZE(config->i2c); i++) + for (i = 0; i < ARRAY_SIZE(config->i2c_voltage); i++) params->SerialIoI2cVoltage[i] = config->i2c_voltage[i]; for (i = 0; i < ARRAY_SIZE(config->domain_vr_config); i++) diff --git a/src/soc/intel/skylake/gspi.c b/src/soc/intel/skylake/gspi.c index 252be7771c..ed36c7a15a 100644 --- a/src/soc/intel/skylake/gspi.c +++ b/src/soc/intel/skylake/gspi.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -23,19 +24,10 @@ const struct gspi_cfg *gspi_get_soc_cfg(void) { - DEVTREE_CONST struct soc_intel_skylake_config *config; - int devfn = SA_DEVFN_ROOT; - DEVTREE_CONST struct device *dev = dev_find_slot(0, devfn); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->gspi[0]; + return &common_config->gspi[0]; } uintptr_t gspi_get_soc_early_base(void) diff --git a/src/soc/intel/skylake/i2c.c b/src/soc/intel/skylake/i2c.c index baf6335ced..c9070fe5a0 100644 --- a/src/soc/intel/skylake/i2c.c +++ b/src/soc/intel/skylake/i2c.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include @@ -22,18 +23,10 @@ const struct dw_i2c_bus_config *dw_i2c_get_soc_cfg(unsigned int bus) { - const struct soc_intel_skylake_config *config; - const struct device *dev = dev_find_slot(0, SA_DEVFN_ROOT); + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); - if (!dev || !dev->chip_info) { - printk(BIOS_ERR, "%s: Could not find SoC devicetree config!\n", - __func__); - return NULL; - } - - config = dev->chip_info; - - return &config->i2c[bus]; + return &common_config->i2c[bus]; } uintptr_t dw_i2c_get_soc_early_base(unsigned int bus) diff --git a/src/soc/intel/skylake/include/soc/soc_chip.h b/src/soc/intel/skylake/include/soc/soc_chip.h new file mode 100644 index 0000000000..f9e7e4fc64 --- /dev/null +++ b/src/soc/intel/skylake/include/soc/soc_chip.h @@ -0,0 +1,21 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2018 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the + * GNU General Public License for more details. + */ + +#ifndef _SOC_SKYLAKE_SOC_CHIP_H_ +#define _SOC_SKYLAKE_SOC_CHIP_H_ + +#include "../../chip.h" + +#endif /* _SOC_SKYLAKE_SOC_CHIP_H_ */ diff --git a/src/soc/intel/skylake/lockdown.c b/src/soc/intel/skylake/lockdown.c index 600be27957..fd1f5b2206 100644 --- a/src/soc/intel/skylake/lockdown.c +++ b/src/soc/intel/skylake/lockdown.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -27,7 +28,7 @@ #define PCR_DMI_GCS 0x274C #define PCR_DMI_GCS_BILD (1 << 0) -static void lpc_lockdown_config(const struct soc_intel_skylake_config *config) +static void lpc_lockdown_config(const struct soc_intel_common_config *config) { /* Set Bios Interface Lock, Bios Lock */ if (config->chipset_lockdown == CHIPSET_LOCKDOWN_COREBOOT) { @@ -63,7 +64,8 @@ static void dmi_lockdown_config(void) pcr_or8(PID_DMI, PCR_DMI_GCS, PCR_DMI_GCS_BILD); } -static void spi_lockdown_config(const struct soc_intel_skylake_config *config) +static void fast_spi_lockdown_config(const + struct soc_intel_common_config *config) { /* Set FAST_SPI opcode menu */ fast_spi_set_opcode_menu(); @@ -86,21 +88,14 @@ static void spi_lockdown_config(const struct soc_intel_skylake_config *config) static void platform_lockdown_config(void *unused) { - struct soc_intel_skylake_config *config; - struct device *dev; - - dev = PCH_DEV_SPI; - /* Check if device is valid, else return */ - if (dev == NULL || dev->chip_info == NULL) - return; - - config = dev->chip_info; + const struct soc_intel_common_config *common_config; + common_config = chip_get_common_soc_structure(); /* LPC lock down configuration */ - lpc_lockdown_config(config); + lpc_lockdown_config(common_config); /* SPI lock down configuration */ - spi_lockdown_config(config); + fast_spi_lockdown_config(common_config); /* DMI lock down configuration */ dmi_lockdown_config(); -- cgit v1.2.3