From bcb8c97af94c9fc814fdbdafe5361666bf81d442 Mon Sep 17 00:00:00 2001 From: Stefan Reinauer Date: Sun, 25 Apr 2010 18:06:32 +0000 Subject: try to unify timing initialization across those boards that need it... Signed-off-by: Stefan Reinauer Acked-by: Stefan Reinauer git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/asus/a8n_e/romstage.c | 6 - src/mainboard/gigabyte/m57sli/romstage.c | 4 +- src/mainboard/msi/ms7260/romstage.c | 4 +- src/mainboard/msi/ms9282/romstage.c | 17 +- src/mainboard/msi/ms9652_fam10/romstage.c | 3 + src/mainboard/nvidia/l1_2pvv/romstage.c | 3 +- src/mainboard/supermicro/h8dme/romstage.c | 13 +- src/mainboard/supermicro/h8dmr/romstage.c | 20 +- src/mainboard/supermicro/h8dmr_fam10/romstage.c | 216 +++++++++++---------- src/mainboard/supermicro/h8qme_fam10/romstage.c | 11 +- src/mainboard/supermicro/x6dai_g/romstage.c | 2 + src/mainboard/supermicro/x6dhe_g/romstage.c | 2 + src/mainboard/tyan/s2912/romstage.c | 4 +- src/mainboard/tyan/s2912_fam10/romstage.c | 4 + src/southbridge/intel/esb6300/esb6300_smbus.c | 11 +- src/southbridge/intel/esb6300/esb6300_smbus.h | 4 +- .../nvidia/mcp55/mcp55_early_setup_car.c | 3 - 17 files changed, 163 insertions(+), 164 deletions(-) diff --git a/src/mainboard/asus/a8n_e/romstage.c b/src/mainboard/asus/a8n_e/romstage.c index 8737152c81..247aa740a2 100644 --- a/src/mainboard/asus/a8n_e/romstage.c +++ b/src/mainboard/asus/a8n_e/romstage.c @@ -63,11 +63,6 @@ #include "northbridge/amd/amdk8/coherent_ht.c" #include "cpu/amd/dualcore/dualcore.c" -static void memreset_setup(void) -{ - /* Nothing to do. */ -} - static void memreset(int controllers, const struct mem_controller *ctrl) { /* Nothing to do. */ @@ -181,7 +176,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) dump_smbus_registers(); #endif - memreset_setup(); sdram_initialize(nodes, ctrl); #if 0 diff --git a/src/mainboard/gigabyte/m57sli/romstage.c b/src/mainboard/gigabyte/m57sli/romstage.c index f329c661e6..1e3bee8845 100644 --- a/src/mainboard/gigabyte/m57sli/romstage.c +++ b/src/mainboard/gigabyte/m57sli/romstage.c @@ -265,6 +265,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } #endif + init_timer(); // Need to use TMICT to synconize FID/VID + needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); @@ -281,9 +283,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c index 9f84911b36..3f7b69dc1b 100644 --- a/src/mainboard/msi/ms7260/romstage.c +++ b/src/mainboard/msi/ms7260/romstage.c @@ -237,6 +237,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } #endif + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); @@ -253,9 +255,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); - /* Do we need apci timer, tsc...., only debug need it for better output */ /* All AP stopped? */ - // init_timer(); /* Need to use TMICT to synconize FID/VID. */ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c index 87517f078c..ee44ea2ad3 100644 --- a/src/mainboard/msi/ms9282/romstage.c +++ b/src/mainboard/msi/ms9282/romstage.c @@ -199,16 +199,16 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) #endif ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - needs_reset = optimize_link_coherent_ht(); + init_timer(); /* Need to use TMICT to synconize FID/VID. */ - needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset = optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); - needs_reset |= mcp55_early_setup_x(); - - if (needs_reset) { - print_info("ht reset -\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\n"); + soft_reset(); + } //It's the time to set ctrl now; fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); @@ -226,6 +226,5 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); post_cache_as_ram(); - } diff --git a/src/mainboard/msi/ms9652_fam10/romstage.c b/src/mainboard/msi/ms9652_fam10/romstage.c index 0d2f80fcf8..c1cb92c8f6 100644 --- a/src/mainboard/msi/ms9652_fam10/romstage.c +++ b/src/mainboard/msi/ms9652_fam10/romstage.c @@ -58,6 +58,8 @@ #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "northbridge/amd/amdfam10/raminit.h" #include "northbridge/amd/amdfam10/amdfam10.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdfam10/reset_test.c" @@ -262,6 +264,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) msr=rdmsr(0xc0010071); printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif + init_timer(); /* Need to use TMICT to synconize FID/VID. */ wants_reset = mcp55_early_setup_x(); diff --git a/src/mainboard/nvidia/l1_2pvv/romstage.c b/src/mainboard/nvidia/l1_2pvv/romstage.c index 58bf5c2958..62be8c2fd5 100644 --- a/src/mainboard/nvidia/l1_2pvv/romstage.c +++ b/src/mainboard/nvidia/l1_2pvv/romstage.c @@ -250,6 +250,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } #endif + init_timer(); /* Need to use TMICT to synconize FID/VID. */ needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); @@ -267,9 +268,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/supermicro/h8dme/romstage.c b/src/mainboard/supermicro/h8dme/romstage.c index e2e297b9ce..4055e7065d 100644 --- a/src/mainboard/supermicro/h8dme/romstage.c +++ b/src/mainboard/supermicro/h8dme/romstage.c @@ -46,16 +46,14 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -// for enable the FAN -#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" - #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" #include -// #include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" @@ -313,7 +311,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } #endif -#if 1 + init_timer(); /* Need to use TMICT to synconize FID/VID. */ + needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); @@ -323,7 +322,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_info("ht reset -\n"); soft_reset(); } -#endif + allow_all_aps_stop(bsp_apicid); //It's the time to set ctrl in sysinfo now; @@ -331,9 +330,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); /* enable in sio_setup */ - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/supermicro/h8dmr/romstage.c b/src/mainboard/supermicro/h8dmr/romstage.c index 28332dca5d..fd0634ff62 100644 --- a/src/mainboard/supermicro/h8dmr/romstage.c +++ b/src/mainboard/supermicro/h8dmr/romstage.c @@ -49,16 +49,14 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -// for enable the FAN -#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" - #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" #include -//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" @@ -213,12 +211,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn #if SET_FIDVID == 1 - { msr_t msr; msr=rdmsr(0xc0010042); - print_debug("begin msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - + printk(BIOS_DEBUG, "begin msr fid, vid %08x, %08x\n", msr.hi, msr.lo); } enable_fid_change(); @@ -231,12 +227,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { msr_t msr; msr=rdmsr(0xc0010042); - print_debug("end msr fid, vid "); print_debug_hex32( msr.hi ); print_debug_hex32(msr.lo); print_debug("\n"); - + printk(BIOS_DEBUG, "end msr fid, vid %08x, %08x\n", msr.hi, msr.lo); } #endif -#if 1 + init_timer(); // Need to use TMICT to synconize FID/VID + needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); @@ -246,7 +242,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) print_info("ht reset -\n"); soft_reset(); } -#endif + allow_all_aps_stop(bsp_apicid); //It's the time to set ctrl in sysinfo now; @@ -254,9 +250,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) // enable_smbus(); /* enable in sio_setup */ - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/supermicro/h8dmr_fam10/romstage.c b/src/mainboard/supermicro/h8dmr_fam10/romstage.c index a763414a4e..3e68e86a74 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/romstage.c +++ b/src/mainboard/supermicro/h8dmr_fam10/romstage.c @@ -44,18 +44,18 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -// for enable the FAN -#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" #include -//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "northbridge/amd/amdfam10/raminit.h" #include "northbridge/amd/amdfam10/amdfam10.h" - +#include "cpu/amd/model_10xxx/apic_timer.c" +#include "lib/delay.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdfam10/reset_test.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" @@ -90,7 +90,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "northbridge/amd/amdfam10/raminit_amdmct.c" #include "northbridge/amd/amdfam10/amdfam10_pci.c" -#include "resourcemap.c" +#include "resourcemap.c" #include "cpu/amd/quadcore/quadcore.c" @@ -103,8 +103,6 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" #include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" - - #include "cpu/amd/car/post_cache_as_ram.c" #include "cpu/amd/microcode/microcode.c" @@ -118,23 +116,25 @@ static inline int spd_read_byte(unsigned device, unsigned address) static void sio_setup(void) { - uint32_t dword; - uint8_t byte; - enable_smbus(); -// smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ - smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1<<0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); - dword |= (1<<16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); + uint32_t dword; + uint8_t byte; + + enable_smbus(); + // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ + /* set FAN ctrl to DC mode */ + smbusx_write_byte(1, (0x58 >> 1), 0xb1, 0xff); + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); + dword |= (1 << 0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); + dword |= (1 << 16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); } @@ -142,14 +142,15 @@ static void sio_setup(void) void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { - struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); + struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); u32 bsp_apicid = 0; u32 val; u32 wants_reset; msr_t msr; - if (!cpu_init_detectedx && boot_cpu()) { + if (!cpu_init_detectedx && boot_cpu()) { /* Nothing special needs to be done to find bus 0 */ /* Allow the HT devices to be found */ @@ -160,126 +161,129 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Setup the mcp55 */ mcp55_enable_rom(); - } + } - post_code(0x30); - - if (bist == 0) { + post_code(0x30); + + if (bist == 0) { bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } + } - post_code(0x32); + post_code(0x32); pnp_enter_ext_func_mode(SERIAL_DEV); pnp_write_config(SERIAL_DEV, 0x24, 0x84 | (1 << 6)); - w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); + w83627hf_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE); pnp_exit_ext_func_mode(SERIAL_DEV); - uart_init(); - console_init(); - printk(BIOS_DEBUG, "\n"); + uart_init(); + console_init(); + printk(BIOS_DEBUG, "\n"); /* Halt if there was a built in self test failure */ report_bist_failure(bist); - val = cpuid_eax(1); - printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); - printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + val = cpuid_eax(1); + printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val); + printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n", sysinfo, sysinfo + 1); + printk(BIOS_DEBUG, "bsp_apicid = %02x \n", bsp_apicid); + printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx); + + /* Setup sysinfo defaults */ + set_sysinfo_in_ram(0); - /* Setup sysinfo defaults */ - set_sysinfo_in_ram(0); + update_microcode(val); + post_code(0x33); - update_microcode(val); - post_code(0x33); + cpuSetAMDMSR(); + post_code(0x34); - cpuSetAMDMSR(); - post_code(0x34); + amd_ht_init(sysinfo); + post_code(0x35); - amd_ht_init(sysinfo); - post_code(0x35); + /* Setup nodes PCI space and start core 0 AP init. */ + finalize_node_setup(sysinfo); - /* Setup nodes PCI space and start core 0 AP init. */ - finalize_node_setup(sysinfo); + /* Setup any mainboard PCI settings etc. */ + setup_mb_resource_map(); + post_code(0x36); - /* Setup any mainboard PCI settings etc. */ - setup_mb_resource_map(); - post_code(0x36); + /* wait for all the APs core0 started by finalize_node_setup. */ - /* wait for all the APs core0 started by finalize_node_setup. */ - /* FIXME: A bunch of cores are going to start output to serial at once. - * It would be nice to fixup prink spinlocks for ROM XIP mode. - * I think it could be done by putting the spinlock flag in the cache - * of the BSP located right after sysinfo. - */ + /* FIXME: A bunch of cores are going to start output to serial at once. + * It would be nice to fixup prink spinlocks for ROM XIP mode. + * I think it could be done by putting the spinlock flag in the cache + * of the BSP located right after sysinfo. + */ - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 - /* Core0 on each node is configured. Now setup any additional cores. */ - printk(BIOS_DEBUG, "start_other_cores()\n"); - start_other_cores(); - post_code(0x37); - wait_all_other_cores_started(bsp_apicid); + /* Core0 on each node is configured. Now setup any additional cores. */ + printk(BIOS_DEBUG, "start_other_cores()\n"); + start_other_cores(); + post_code(0x37); + wait_all_other_cores_started(bsp_apicid); #endif - post_code(0x38); + post_code(0x38); #if SET_FIDVID == 1 - msr = rdmsr(0xc0010071); - printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", + msr.hi, msr.lo); - /* FIXME: The sb fid change may survive the warm reset and only - * need to be done once.*/ + /* FIXME: The sb fid change may survive the warm reset and only + * need to be done once.*/ - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - post_code(0x39); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + post_code(0x39); - if (!warm_reset_detect(0)) { // BSP is node 0 - init_fidvid_bsp(bsp_apicid, sysinfo->nodes); - } else { - init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 - } + if (!warm_reset_detect(0)) { // BSP is node 0 + init_fidvid_bsp(bsp_apicid, sysinfo->nodes); + } else { + init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 + } - post_code(0x3A); + post_code(0x3A); - /* show final fid and vid */ - msr=rdmsr(0xc0010071); - printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); + /* show final fid and vid */ + msr = rdmsr(0xc0010071); + printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", + msr.hi, msr.lo); #endif - wants_reset = mcp55_early_setup_x(); + init_timer(); // Need to use TMICT to synconize FID/VID - /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ - if (!warm_reset_detect(0)) { - print_info("...WARM RESET...\n\n\n"); - soft_reset(); - die("After soft_reset_x - shouldn't see this message!!!\n"); - } + wants_reset = mcp55_early_setup_x(); - if (wants_reset) - printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); + /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ + if (!warm_reset_detect(0)) { + print_info("...WARM RESET...\n\n\n"); + soft_reset(); + die("After soft_reset_x - shouldn't see this message!!!\n"); + } - post_code(0x3B); + if (wants_reset) + printk(BIOS_DEBUG, "mcp55_early_setup_x wants additional reset!\n"); -/* It's the time to set ctrl in sysinfo now; */ -printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); -fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + post_code(0x3B); -post_code(0x3D); + /* It's the time to set ctrl in sysinfo now; */ + printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); -//printk(BIOS_DEBUG, "enable_smbus()\n"); -// enable_smbus(); /* enable in sio_setup */ + post_code(0x3D); -post_code(0x40); + // printk(BIOS_DEBUG, "enable_smbus()\n"); + // enable_smbus(); /* enable in sio_setup */ - printk(BIOS_DEBUG, "raminit_amdmct()\n"); - raminit_amdmct(sysinfo); - post_code(0x41); + post_code(0x40); -// printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); - post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB. - post_code(0x42); // Should never see this post code. + printk(BIOS_DEBUG, "raminit_amdmct()\n"); + raminit_amdmct(sysinfo); + post_code(0x41); + // printk(BIOS_DEBUG, "\n*** Yes, the copy/decompress is taking a while, FIXME!\n"); + post_cache_as_ram(); // BSP switch stack to ram, copy + execute stage 2 + post_code(0x42); // Should never see this post code. } - diff --git a/src/mainboard/supermicro/h8qme_fam10/romstage.c b/src/mainboard/supermicro/h8qme_fam10/romstage.c index 1b2686dbda..aa2081f7df 100644 --- a/src/mainboard/supermicro/h8qme_fam10/romstage.c +++ b/src/mainboard/supermicro/h8qme_fam10/romstage.c @@ -44,19 +44,18 @@ #include "option_table.h" #include "pc80/mc146818rtc_early.c" -// for enable the FAN -#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" - #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" #include -//#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +// for enable the FAN +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" #include "northbridge/amd/amdfam10/raminit.h" #include "northbridge/amd/amdfam10/amdfam10.h" - +#include "cpu/amd/model_10xxx/apic_timer.c" +#include "lib/delay.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdfam10/reset_test.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" @@ -293,6 +292,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo); #endif + init_timer(); // Need to use TMICT to synconize FID/VID + wants_reset = mcp55_early_setup_x(); /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ diff --git a/src/mainboard/supermicro/x6dai_g/romstage.c b/src/mainboard/supermicro/x6dai_g/romstage.c index 9fef5ccaa5..b718daf9ab 100644 --- a/src/mainboard/supermicro/x6dai_g/romstage.c +++ b/src/mainboard/supermicro/x6dai_g/romstage.c @@ -10,6 +10,8 @@ #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" +#include "pc80/udelay_io.c" +#include "lib/delay.c" #include "southbridge/intel/esb6300/esb6300_early_smbus.c" #include "northbridge/intel/e7525/raminit.h" #include "superio/winbond/w83627hf/w83627hf.h" diff --git a/src/mainboard/supermicro/x6dhe_g/romstage.c b/src/mainboard/supermicro/x6dhe_g/romstage.c index b17429aca9..67bd2cfb56 100644 --- a/src/mainboard/supermicro/x6dhe_g/romstage.c +++ b/src/mainboard/supermicro/x6dhe_g/romstage.c @@ -10,6 +10,8 @@ #include "pc80/serial.c" #include "console/console.c" #include "lib/ramtest.c" +#include "pc80/udelay_io.c" +#include "lib/delay.c" #include "southbridge/intel/esb6300/esb6300_early_smbus.c" #include "northbridge/intel/e7520/raminit.h" #include "superio/winbond/w83627hf/w83627hf.h" diff --git a/src/mainboard/tyan/s2912/romstage.c b/src/mainboard/tyan/s2912/romstage.c index 26ce672bf4..144c629e20 100644 --- a/src/mainboard/tyan/s2912/romstage.c +++ b/src/mainboard/tyan/s2912/romstage.c @@ -245,6 +245,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) } #endif + init_timer(); // Need to use TMICT to synconize FID/VID + needs_reset |= optimize_link_coherent_ht(); needs_reset |= optimize_link_incoherent_ht(sysinfo); needs_reset |= mcp55_early_setup_x(); @@ -262,9 +264,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) enable_smbus(); - //do we need apci timer, tsc...., only debug need it for better output /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synconize FID/VID sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); diff --git a/src/mainboard/tyan/s2912_fam10/romstage.c b/src/mainboard/tyan/s2912_fam10/romstage.c index 5f6d2a7691..6ca5eec3ce 100644 --- a/src/mainboard/tyan/s2912_fam10/romstage.c +++ b/src/mainboard/tyan/s2912_fam10/romstage.c @@ -59,6 +59,8 @@ #include "northbridge/amd/amdfam10/raminit.h" #include "northbridge/amd/amdfam10/amdfam10.h" +#include "cpu/amd/model_10xxx/apic_timer.c" +#include "lib/delay.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdfam10/reset_test.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" @@ -254,6 +256,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); #endif + init_timer(); // Need to use TMICT to synconize FID/VID + wants_reset = mcp55_early_setup_x(); /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ diff --git a/src/southbridge/intel/esb6300/esb6300_smbus.c b/src/southbridge/intel/esb6300/esb6300_smbus.c index 9be4a4a37e..5b1940f93e 100644 --- a/src/southbridge/intel/esb6300/esb6300_smbus.c +++ b/src/southbridge/intel/esb6300/esb6300_smbus.c @@ -8,11 +8,16 @@ #include "esb6300.h" #include "esb6300_smbus.h" -static int lsmbus_read_byte(device_t dev, uint8_t address) +static int lsmbus_read_byte(device_t dev, u8 address) { + u16 device; struct resource *res; - res = find_resource(dev, 0x20); - + struct bus *pbus; + + device = dev->path.i2c.device; + pbus = get_pbus_smbus(dev); + res = find_resource(pbus->dev, 0x20); + return do_smbus_read_byte(res->base, device, address); } diff --git a/src/southbridge/intel/esb6300/esb6300_smbus.h b/src/southbridge/intel/esb6300/esb6300_smbus.h index 439b8fc586..0b793c37f9 100644 --- a/src/southbridge/intel/esb6300/esb6300_smbus.h +++ b/src/southbridge/intel/esb6300/esb6300_smbus.h @@ -40,8 +40,7 @@ static int smbus_wait_until_done(unsigned smbus_io_base) return loops?0:-1; } -#ifdef UNUSED_CODE -static int smbus_wait_until_blk_done(unsigned smbus_io_base) +static inline int smbus_wait_until_blk_done(unsigned smbus_io_base) { unsigned loops = SMBUS_TIMEOUT; unsigned char byte; @@ -53,7 +52,6 @@ static int smbus_wait_until_blk_done(unsigned smbus_io_base) } while((byte&(1<<7)) == 0); return loops?0:-1; } -#endif static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address) { diff --git a/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c b/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c index 3a178b8e74..60337d1635 100644 --- a/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c +++ b/src/southbridge/nvidia/mcp55/mcp55_early_setup_car.c @@ -134,9 +134,6 @@ static void mcp55_early_clear_port(unsigned mcp55_num, unsigned *busn, unsigned } -#include "src/pc80/udelay_io.c" -#include "src/lib/delay.c" - static void mcp55_early_pcie_setup(unsigned busnx, unsigned devnx, unsigned anactrl_io_base, unsigned pci_e_x) { uint32_t tgio_ctrl; -- cgit v1.2.3