From bb748c5f92325b3342aed0286c05a4f8e385fd29 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ky=C3=B6sti=20M=C3=A4lkki?= Date: Thu, 24 May 2018 09:56:06 +0300 Subject: AMD: Remove some leftover includes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Change-Id: I740d945693b4f16495488fb76ad6d1ee531185ac Signed-off-by: Kyösti Mälkki Reviewed-on: https://review.coreboot.org/26508 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth --- src/include/cpu/amd/gx2def.h | 536 ------------------------------------------- src/include/cpu/amd/sc520.h | 317 ------------------------- 2 files changed, 853 deletions(-) delete mode 100644 src/include/cpu/amd/gx2def.h delete mode 100644 src/include/cpu/amd/sc520.h diff --git a/src/include/cpu/amd/gx2def.h b/src/include/cpu/amd/gx2def.h deleted file mode 100644 index 195d584e05..0000000000 --- a/src/include/cpu/amd/gx2def.h +++ /dev/null @@ -1,536 +0,0 @@ -#ifndef CPU_AMD_GX2DEF_H -#define CPU_AMD_GX2DEF_H - -#define CPU_ID_1_X 0x540 /* Stepping ID 1.x*/ -#define CPU_ID_2_0 0x551 /* Stepping ID 2.0*/ -#define CPU_ID_2_1 0x552 /* Stepping ID 2.1*/ -#define CPU_ID_2_2 0x553 /* Stepping ID 2.2*/ - -#define CPU_REV_1_0 0x011 -#define CPU_REV_1_1 0x012 -#define CPU_REV_1_2 0x013 -#define CPU_REV_1_3 0x014 -#define CPU_REV_2_0 0x020 -#define CPU_REV_2_1 0x021 -#define CPU_REV_2_2 0x022 -#define CPU_REV_3_0 0x030 - -/* GeodeLink Control Processor Registers, GLIU1, Port 3 ; MSR_GLCP = 4c00xxxx */ -#define GLCP_CLK_DIS_DELAY (MSR_GLCP + 0x08) -#define GLCP_PMCLKDISABLE (MSR_GLCP + 0x09) -#define GLCP_DBGOUT (MSR_GLCP + 0x0C) -#define GLCP_PROCSTAT (MSR_GLCP + 0x0D) -#define GLCP_DBGCLKCTL (MSR_GLCP + 0x16) -#define GLCP_CHIP_REVID (MSR_GLCP + 0x17) -#define GLCP_TH_OD (MSR_GLCP + 0x1E) -#define GLCP_FIFOCTL (MSR_GLCP + 0x5E) - -/* GLCP_SYS_RSTPLL, Upper 32 bits */ -#define GLCP_SYS_RSTPLL_MDIV_SHIFT 9 -#define GLCP_SYS_RSTPLL_VDIV_SHIFT 6 -#define GLCP_SYS_RSTPLL_FBDIV_SHIFT 0 - -/* GLCP_SYS_RSTPLL, Lower 32 bits */ -#define GLCP_SYS_RSTPLL_SWFLAGS_SHIFT 26 -#define GLCP_SYS_RSTPLL_SWFLAGS_MASK (0x3f << 26) -#define GLCP_SYS_RSTPLL_LOCKWAIT 24 -#define GLCP_SYS_RSTPLL_HOLDCOUNT 16 -#define GLCP_SYS_RSTPLL_BYPASS 15 -#define GLCP_SYS_RSTPLL_PD 14 -#define GLCP_SYS_RSTPLL_RESETPLL 13 -#define GLCP_SYS_RSTPLL_DDRMODE 10 -#define GLCP_SYS_RSTPLL_VA_SEMI_SYNC_MODE 9 -#define GLCP_SYS_RSTPLL_PCI_SEMI_SYNC_MODE 8 -#define GLCP_SYS_RSTPLL_CHIP_RESET 0 - -/* MSR routing as follows */ -/* MSB = 1 means not for CPU */ -/* next 3 bits 1st port */ -/* next3 bits next port if through an GLIU */ -/* etc... */ - -/* Redcloud as follows. */ -/* GLIU0*/ -/* port0 - GLIU0 */ -/* port1 - MC */ -/* port2 - GLIU1 */ -/* port3 - CPU */ -/* port4 - VG */ -/* port5 - GP */ -/* port6 - DF */ - -/* GLIU1*/ -/* port1 - GLIU0 */ -/* port3 - GLCP */ -/* port4 - PCI */ -/* port5 - FG */ - -#define GL0_GLIU0 0 -#define GL0_MC 1 -#define GL0_GLIU1 2 -#define GL0_CPU 3 -#define GL0_VG 4 -#define GL0_GP 5 -#define GL0_DF 6 - -#define GL1_GLIU0 1 -#define GL1_GLCP 3 -#define GL1_PCI 4 -#define GL1_FG 5 - -/* 1000xxxx - To get on GeodeLink one bit has to be set */ -#define MSR_GLIU0 ((GL0_GLIU0 << 29) + (1 << 28)) -#define MSR_MC (GL0_MC << 29) /* 2000xxxx */ -#define MSR_GLIU1 (GL0_GLIU1 << 29) /* 4000xxxx */ -/* 6000xxxx - this is not used for BIOS since code executing on CPU doesn't - * need to be routed - */ -#define MSR_CPU (GL0_CPU << 29) -#define MSR_VG (GL0_VG << 29) /* 8000xxxx */ -#define MSR_GP (GL0_GP << 29) /* A000xxxx */ -#define MSR_DF (GL0_DF << 29) /* C000xxxx */ - -#define MSR_GLCP ((GL1_GLCP << 26) + MSR_GLIU1) /* 4C00xxxx */ -#define MSR_PCI ((GL1_PCI << 26) + MSR_GLIU1) /* 5000xxxx */ -#define MSR_FG ((GL1_FG << 26) + MSR_GLIU1) /* 5400xxxx */ - -/* GeodeLink Interface Unit 0 (GLIU0) port0 */ -#define GLIU0_GLD_MSR_CAP (MSR_GLIU0 + 0x2000) -#define GLIU0_GLD_MSR_PM (MSR_GLIU0 + 0x2004) - -#define GLIU0_DESC_BASE (MSR_GLIU0 + 0x20) -#define GLIU0_CAP (MSR_GLIU0 + 0x86) -#define GLIU0_GLD_MSR_COH (MSR_GLIU0 + 0x80) - -/* Memory Controller GLIU0 port 1 */ -#define MC_GLD_MSR_CAP (MSR_MC + 0x2000) -#define MC_GLD_MSR_PM (MSR_MC + 0x2004) - -#define MC_CF07_DATA (MSR_MC + 0x18) -#define CF07_UPPER_D1_SZ_SHIFT 28 -#define CF07_UPPER_D1_MB_SHIFT 24 -#define CF07_UPPER_D1_CB_SHIFT 20 -#define CF07_UPPER_D1_PSZ_SHIFT 16 -#define CF07_UPPER_D0_SZ_SHIFT 12 -#define CF07_UPPER_D0_MB_SHIFT 8 -#define CF07_UPPER_D0_CB_SHIFT 4 -#define CF07_UPPER_D0_PSZ_SHIFT 0 -#define CF07_LOWER_REF_INT_SHIFT 8 -#define CF07_LOWER_LOAD_MODE_DDR_SET (1 << 28) -#define CF07_LOWER_LOAD_MODE_DLL_RESET (1 << 27) -#define CF07_LOWER_EMR_QFC_SET (1 << 26) -#define CF07_LOWER_EMR_DRV_SET (1 << 25) -#define CF07_LOWER_REF_TEST_SET (1 << 3) -#define CF07_LOWER_PROG_DRAM_SET (1 << 0) - -#define MC_CF8F_DATA (MSR_MC + 0x19) -#define CF8F_UPPER_XOR_BS_SHIFT 19 -#define CF8F_UPPER_XOR_MB0_SHIFT 18 -#define CF8F_UPPER_XOR_BA1_SHIFT 17 -#define CF8F_UPPER_XOR_BA0_SHIFT 16 -#define CF8F_UPPER_REORDER_DIS_SET (1 << 8) -#define CF8F_UPPER_REG_DIMM_SHIFT 4 -#define CF8F_LOWER_CAS_LAT_SHIFT 28 -#define CF8F_LOWER_REF2ACT_SHIFT 24 -#define CF8F_LOWER_ACT2PRE_SHIFT 20 -#define CF8F_LOWER_PRE2ACT_SHIFT 16 -#define CF8F_LOWER_ACT2CMD_SHIFT 12 -#define CF8F_LOWER_ACT2ACT_SHIFT 8 -#define CF8F_UPPER_32BIT_SET (1 << 5) -#define CF8F_UPPER_HOI_LOI_SET (1 << 1) - -#define MC_CF1017_DATA (MSR_MC + 0x1A) -#define CF1017_LOWER_PM1_UP_DLY_SET (1 << 8) -#define CF1017_LOWER_WR2DAT_SHIFT 0 - -#define MC_CFCLK_DBUG (MSR_MC + 0x1D) -#define CFCLK_UPPER_MTST_B2B_DIS_SET (1 << 2) -#define CFCLK_UPPER_MTST_DQS_EN_SET (1 << 1) -#define CFCLK_UPPER_MTEST_EN_SET (1 << 0) -#define CFCLK_LOWER_MASK_CKE_SET1 (1 << 9) -#define CFCLK_LOWER_MASK_CKE_SET0 (1 << 8) -#define CFCLK_LOWER_SDCLK_SET (0x0F << 0) - -#define MC_CF_RDSYNC (MSR_MC + 0x1F) - -/* GLIU1 GLIU0 port2 */ -#define GLIU1_GLD_MSR_CAP (MSR_GLIU1 + 0x2000) -#define GLIU1_GLD_MSR_PM (MSR_GLIU1 + 0x2004) -#define GLIU1_GLD_MSR_COH (MSR_GLIU1 + 0x80) - -/* CPU ; does not need routing instructions since we are executing there. */ -#define CPU_GLD_MSR_CAP 0x2000 -#define CPU_GLD_MSR_CONFIG 0x2001 -#define CPU_GLD_MSR_PM 0x2004 -#define CPU_GLD_MSR_DIAG 0x2005 -#define DIAG_SEL1_MODE_SHIFT 16 -#define DIAG_SEL1_SET (1 << 31) -#define DIAG_SEL0__MODE_SHIFT 0 -#define DIAG_SET0_SET (1 << 15) -#define CPU_PF_BTB_CONF 0x1100 -#define BTB_ENABLE_SET (1 << 0) -#define RETURN_STACK_ENABLE_SET (1 << 4) -#define CPU_PF_BTBRMA_BIST 0x110C -#define CPU_XC_CONFIG 0x1210 -#define XC_CONFIG_SUSP_ON_HLT (1 << 0) -#define CPU_ID_CONFIG 0x1250 -#define ID_CONFIG_SERIAL_SET (1 << 0) -#define CPU_AC_MSR 0x1301 -#define CPU_EX_BIST 0x1428 - -/* IM */ -#define CPU_IM_CONFIG 0x1700 -#define IM_CONFIG_LOWER_ICD_SET (1 << 8) -#define IM_CONFIG_LOWER_QWT_SET (1 << 20) -#define CPU_IC_INDEX 0x1710 -#define CPU_IC_DATA 0x1711 -#define CPU_IC_TAG 0x1712 -#define CPU_IC_TAG_I 0x1713 -#define CPU_ITB_INDEX 0x1720 -#define CPU_ITB_LRU 0x1721 -#define CPU_ITB_ENTRY 0x1722 -#define CPU_ITB_ENTRY_I 0x1723 -#define CPU_IM_BIST_TAG 0x1730 -#define CPU_IM_BIST_DATA 0x1731 - -/* various CPU MSRs */ -#define CPU_DM_CONFIG0 0x1800 -#define DM_CONFIG0_UPPER_WSREQ_SHIFT 12 -#define DM_CONFIG0_LOWER_DCDIS_SET (1<<8) -#define DM_CONFIG0_LOWER_WBINVD_SET (1<<5) -#define DM_CONFIG0_LOWER_MISSER_SET (1<<1) - -/* configuration MSRs */ -#define CPU_RCONF_DEFAULT 0x1808 -#define RCONF_DEFAULT_UPPER_ROMRC_SHIFT 24 -#define RCONF_DEFAULT_UPPER_ROMBASE_SHIFT 4 -#define RCONF_DEFAULT_UPPER_DEVRC_HI_SHIFT 0 -#define RCONF_DEFAULT_LOWER_DEVRC_LOW_SHIFT 28 -#define RCONF_DEFAULT_LOWER_SYSTOP_SHIFT 8 -#define RCONF_DEFAULT_LOWER_SYSRC_SHIFT 0 -#define CPU_RCONF_BYPASS 0x180A -#define CPU_RCONF_A0_BF 0x180B -#define CPU_RCONF_C0_DF 0x180C -#define CPU_RCONF_E0_FF 0x180D -#define CPU_RCONF_SMM 0x180E -#define RCONF_SMM_UPPER_SMMTOP_SHIFT 12 -#define RCONF_SMM_UPPER_RCSMM_SHIFT 0 -#define RCONF_SMM_LOWER_SMMBASE_SHIFT 12 -#define RCONF_SMM_LOWER_RCNORM_SHIFT 0 -#define RCONF_SMM_LOWER_EN_SET (1<<8) -#define CPU_RCONF_DMM 0x180F -#define RCONF_DMM_UPPER_DMMTOP_SHIFT 12 -#define RCONF_DMM_UPPER_RCDMM_SHIFT 0 -#define RCONF_DMM_LOWER_DMMBASE_SHIFT 12 -#define RCONF_DMM_LOWER_RCNORM_SHIFT 0 -#define RCONF_DMM_LOWER_EN_SET (1<<8) - -#define CPU_RCONF0 0x1810 -#define CPU_RCONF1 0x1811 -#define CPU_RCONF2 0x1812 -#define CPU_RCONF3 0x1813 -#define CPU_RCONF4 0x1814 -#define CPU_RCONF5 0x1815 -#define CPU_RCONF6 0x1816 -#define CPU_RCONF7 0x1817 -#define CPU_CR1_MSR 0x1881 -#define CPU_CR2_MSR 0x1882 -#define CPU_CR3_MSR 0x1883 -#define CPU_CR4_MSR 0x1884 -#define CPU_DC_INDEX 0x1890 -#define CPU_DC_DATA 0x1891 -#define CPU_DC_TAG 0x1892 -#define CPU_DC_TAG_I 0x1893 -#define CPU_SNOOP 0x1894 -#define CPU_DTB_INDEX 0x1898 -#define CPU_DTB_LRU 0x1899 -#define CPU_DTB_ENTRY 0x189A -#define CPU_DTB_ENTRY_I 0x189B -#define CPU_L2TB_INDEX 0x189C -#define CPU_L2TB_LRU 0x189D -#define CPU_L2TB_ENTRY 0x189E -#define CPU_L2TB_ENTRY_I 0x189F -#define CPU_DM_BIST 0x18C0 - -/* SMM */ -#define CPU_AC_SMM_CTL 0x1301 -#define SMM_NMI_EN_SET (1<<0) -#define SMM_SUSP_EN_SET (1<<1) -#define NEST_SMI_EN_SET (1<<2) -#define SMM_INST_EN_SET (1<<3) -#define INTL_SMI_EN_SET (1<<4) -#define EXTL_SMI_EN_SET (1<<5) - -#define CPU_FPU_MSR_MODE 0x1A00 -#define FPU_IE_SET (1<<0) - -#define CPU_FP_UROM_BIST 0x1A03 - -#define CPU_BC_CONF_0 0x1900 -#define TSC_SUSP_SET (1<<5) -#define SUSP_EN_SET (1<<12) - -/* VG GLIU0 port4 */ -#define VG_GLD_MSR_CAP (MSR_VG + 0x2000) -#define VG_GLD_MSR_CONFIG (MSR_VG + 0x2001) -#define VG_GLD_MSR_PM (MSR_VG + 0x2004) - -#define GP_GLD_MSR_CAP (MSR_GP + 0x2000) -#define GP_GLD_MSR_CONFIG (MSR_GP + 0x2001) -#define GP_GLD_MSR_PM (MSR_GP + 0x2004) - -/* DF GLIU0 port6 */ -#define DF_GLD_MSR_CAP (MSR_DF + 0x2000) -#define DF_GLD_MSR_MASTER_CONF (MSR_DF + 0x2001) -#define DF_LOWER_LCD_SHIFT 6 -#define DF_GLD_MSR_PM (MSR_DF + 0x2004) - -/* GeodeLink Control Processor GLIU1 port3 */ -#define GLCP_GLD_MSR_CAP (MSR_GLCP + 0x2000) -#define GLCP_GLD_MSR_CONF (MSR_GLCP + 0x2001) -#define GLCP_GLD_MSR_PM (MSR_GLCP + 0x2004) - -#define GLCP_DELAY_CONTROLS (MSR_GLCP + 0x0F) - -#define GLCP_SYS_RSTPLL (MSR_GLCP + 0x14 /* R/W */) -#define RSTPLL_UPPER_MDIV_SHIFT 9 -#define RSTPLL_UPPER_VDIV_SHIFT 6 -#define RSTPLL_UPPER_FBDIV_SHIFT 0 -#define RSTPLL_LOWER_SWFLAGS_SHIFT 26 -#define RSTPLL_LOWER_SWFLAGS_MASK (0x3F<