From b7eca6f123f8b04250b94380b5ac1c234a875728 Mon Sep 17 00:00:00 2001 From: Maxim Polyakov Date: Mon, 23 Nov 2020 15:47:51 +0300 Subject: drivers/i2c/nct7802y: Move the sensor initialization procedure The current location for the sensor initialization procedure was chosen by mistake. Move this into a separate function in nct7802y.c . Change-Id: I093ae75db5f0051bff65375b0720c86642b9148a Signed-off-by: Maxim Polyakov Reviewed-on: https://review.coreboot.org/c/coreboot/+/47861 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber --- src/drivers/i2c/nct7802y/nct7802y.c | 15 +++++++++++++++ src/drivers/i2c/nct7802y/nct7802y_fan.c | 7 ------- 2 files changed, 15 insertions(+), 7 deletions(-) diff --git a/src/drivers/i2c/nct7802y/nct7802y.c b/src/drivers/i2c/nct7802y/nct7802y.c index 5057890c6b..bb52a3fd0b 100644 --- a/src/drivers/i2c/nct7802y/nct7802y.c +++ b/src/drivers/i2c/nct7802y/nct7802y.c @@ -2,10 +2,24 @@ #include #include +#include #include "nct7802y.h" #include "chip.h" +static void nct7802y_init_sensors(struct device *const dev) +{ + const struct drivers_i2c_nct7802y_config *const config = dev->chip_info; + unsigned int i; + u8 value = 0; + + for (i = 0; i < NCT7802Y_RTD_CNT; ++i) + value |= MODE_SELECTION_RTDx(i, config->sensors.rtd[i]); + if (config->sensors.local_enable) + value |= MODE_SELECTION_LTD_EN; + nct7802y_write(dev, MODE_SELECTION, value); +} + static void nct7802y_init(struct device *const dev) { if (!dev->chip_info) { @@ -15,6 +29,7 @@ static void nct7802y_init(struct device *const dev) } nct7802y_init_peci(dev); + nct7802y_init_sensors(dev); nct7802y_init_fan(dev); } diff --git a/src/drivers/i2c/nct7802y/nct7802y_fan.c b/src/drivers/i2c/nct7802y/nct7802y_fan.c index a608802c7b..bfe3a91a30 100644 --- a/src/drivers/i2c/nct7802y/nct7802y_fan.c +++ b/src/drivers/i2c/nct7802y/nct7802y_fan.c @@ -78,13 +78,6 @@ void nct7802y_init_fan(struct device *const dev) init_fan(dev, &config->fan[i], i); } - value = 0; - for (i = 0; i < NCT7802Y_RTD_CNT; ++i) - value |= MODE_SELECTION_RTDx(i, config->sensors.rtd[i]); - if (config->sensors.local_enable) - value |= MODE_SELECTION_LTD_EN; - nct7802y_write(dev, MODE_SELECTION, value); - switch (config->on_pecierror) { case PECI_ERROR_KEEP: value = CLOSE_LOOP_FAN_PECI_ERR_CURR; -- cgit v1.2.3