From b578627f5101d57103a66ade89863821254af89e Mon Sep 17 00:00:00 2001 From: Dave Frodin Date: Tue, 6 Nov 2012 13:37:08 -0700 Subject: Fix whitespace issue with help message in Kconfig file Every line of text after a 'help' label in a Kconfig file must have the same whitespace preceding it, otherwise it's no longer considered help text. Change-Id: I97093bee72b295b315d78d4c26d7186bf1017fda Signed-off-by: Dave Frodin Reviewed-on: http://review.coreboot.org/1687 Reviewed-by: Stefan Reinauer Tested-by: build bot (Jenkins) --- src/southbridge/amd/agesa/hudson/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/src/southbridge/amd/agesa/hudson/Kconfig b/src/southbridge/amd/agesa/hudson/Kconfig index f58f920eb7..4afe377e75 100644 --- a/src/southbridge/amd/agesa/hudson/Kconfig +++ b/src/southbridge/amd/agesa/hudson/Kconfig @@ -95,17 +95,17 @@ config HUDSON_FWM_POSITION default 0xFF820000 if BOARD_ROMSIZE_KB_8192 default 0xFF020000 if BOARD_ROMSIZE_KB_16384 help - Hudson requires the firmware MUST to be located at + Hudson requires the firmware MUST be located at a specific address (ROM start address + 0x20000), otherwise xhci host Controller can not find or load the xhci firmware. The firmware start address is dependent on the ROM chip size. The default offset is 0x20000 from the ROM start address, namely - 0xFFF20000 if flash chip size is 1M - 0xFFE20000 if flash chip size is 2M - 0xFFC20000 if flash chip size is 4M - 0xFF820000 if flash chip size is 8M - 0xFF020000 if flash chip size is 16M + 0xFFF20000 if flash chip size is 1M + 0xFFE20000 if flash chip size is 2M + 0xFFC20000 if flash chip size is 4M + 0xFF820000 if flash chip size is 8M + 0xFF020000 if flash chip size is 16M endif choice -- cgit v1.2.3