From ac57311575e3ca08504d5640c437e96aa8c12333 Mon Sep 17 00:00:00 2001 From: Felix Held Date: Wed, 3 Mar 2021 02:02:42 +0100 Subject: vc/amd/fsp/cezanne: add platform_descriptors.h Signed-off-by: Felix Held Change-Id: Ib16f133b270c99c6e060e5bd0c156cbb03293474 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51197 Tested-by: build bot (Jenkins) Reviewed-by: Raul Rangel Reviewed-by: Marshall Dawson --- .../amd/fsp/cezanne/platform_descriptors.h | 218 +++++++++++++++++++++ 1 file changed, 218 insertions(+) create mode 100644 src/vendorcode/amd/fsp/cezanne/platform_descriptors.h diff --git a/src/vendorcode/amd/fsp/cezanne/platform_descriptors.h b/src/vendorcode/amd/fsp/cezanne/platform_descriptors.h new file mode 100644 index 0000000000..ada9bbd209 --- /dev/null +++ b/src/vendorcode/amd/fsp/cezanne/platform_descriptors.h @@ -0,0 +1,218 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * These definitions are used to describe PCIe bifurcation and display physical + * connector types connected to the SOC. + */ + +#ifndef PI_CEZANNE_PLATFORM_DESCRIPTORS_H +#define PI_CEZANNE_PLATFORM_DESCRIPTORS_H + +#define NUM_DXIO_PHY_PARAMS 6 +#define NUM_DXIO_PORT_PARAMS 6 + +/* Engine descriptor type */ +enum dxio_engine_type { + UNUSED_ENGINE = 0x00, // Unused descriptor + PCIE_ENGINE = 0x01, // PCIe port + USB_ENGINE = 0x02, // USB port + SATA_ENGINE = 0x03, // SATA + DP_ENGINE = 0x08, // Digital Display + ETHERNET_ENGINE = 0x10, // Ethernet (GBe, XGBe) + MAX_ENGINE // Max engine type for boundary check. +}; + +/* PCIe link capability/speed */ +enum dxio_link_speed_cap { + GEN_MAX = 0, // Maximum supported + GEN1, + GEN2, + GEN3, + GEN_INVALID // Max Gen for boundary check +}; + +/* Upstream Auto Speed Change Allowed */ +enum dxio_upstream_auto_speed_change { + SPDC_DEFAULT = 0, // Enabled for Gen2 and Gen3 + SPDC_DISABLED, + SPDC_ENABLED, + SPDC_INVALID +}; + +/* SATA ChannelType initialization */ +enum dxio_sata_channel_type { + SATA_CHANNEL_OTHER = 0, // Default Channel Type + SATA_CHANNEL_SHORT, // Short Trace Channel Type + SATA_CHANNEL_LONG // Long Trace Channel Type +}; + +/* CLKREQ for PCIe type descriptors */ +enum cpm_clk_req { + CLK_DISABLE = 0x00, + CLK_REQ0, + CLK_REQ1, + CLK_REQ2, + CLK_REQ3, + CLK_REQ4_GFX, + CLK_REQ5, + CLK_REQ6, + CLK_ENABLE = 0xff, +}; + +/* PCIe link ASPM initialization */ +enum dxio_aspm_type { + ASPM_DISABLED = 0, // Disabled + ASPM_L0s, // PCIe L0s link state + ASPM_L1, // PCIe L1 link state + ASPM_L0sL1, // PCIe L0s & L1 link state + ASPM_MAX // Not valid value, used to verify input +}; + +enum dxio_port_param_type { + PP_DEVICE = 1, + PP_FUNCTION, + PP_PORT_PRESENT, + PP_LINK_SPEED_CAP, + PP_LINK_ASPM, + PP_HOTPLUG_TYPE, + PP_CLKREQ, + PP_ASPM_L1_1, + PP_ASPM_L1_2, + PP_COMPLIANCE, + PP_SAFE_MODE, + PP_CHIPSET_LINK, + PP_CLOCK_PM, + PP_CHANNELTYPE, + PP_TURN_OFF_UNUSED_LANES, + PP_APIC_GROUPMAP, + PP_APIC_SWIZZLE, + PP_APIC_BRIDGEINT, + PP_MASTER_PLL, + PP_SLOT_NUM, + PP_PHY_PARAM, + PP_ESM, + PP_CCIX, + PP_GEN3_DS_TX_PRESET, + PP_GEN3_DS_RX_PRESET_HINT, + PP_GEN3_US_TX_PRESET, + PP_GEN3_US_RX_PRESET_HINT, + PP_GEN4_DS_TX_PRESET, + PP_GEN4_US_TX_PRESET, + PP_GEN3_FIXED_PRESET, + PP_GEN4_FIXED_PRESET, + PP_PSPP_DC, + PP_PSPP_AC, + PP_GEN2_DEEMPHASIS, + PP_INVERT_POLARITY, + PP_TARGET_LINK_SPEED, + PP_GEN4_DLF_CAP_DISABLE, + PP_GEN4_DLF_EXCHG_DISABLE +}; + +/* DDI Aux channel */ +enum ddi_aux_type { + DDI_AUX1 = 0, + DDI_AUX2, + DDI_AUX3, + DDI_AUX4, + DDI_AUX5, + DDI_AUX6, + DDI_AUX_MAX // Not valid value, used to verify input +}; + +/* DDI Hdp Index */ +enum ddi_hdp_type { + DDI_HDP1 = 0, + DDI_HDP2, + DDI_HDP3, + DDI_HDP4, + DDI_HDP5, + DDI_HDP6, + DDI_HDP_MAX // Not valid value, used to verify input +}; + +/* DDI display connector type */ +enum ddi_connector_type { + DDI_DP = 0, // DP + DDI_EDP, // eDP + DDI_SINGLE_LINK_DVI, // Single Link DVI-D + DDI_DUAL_LINK_DVI, // Dual Link DVI-D + DDI_HDMI, // HDMI + DDI_DP_TO_VGA, // DP-to-VGA + DDI_DP_TO_LVDS, // DP-to-LVDS + DDI_NUTMEG_DP_TO_VGA, // Hudson-2 NutMeg DP-to-VGA + DDI_SINGLE_LINK_DVI_I, // Single Link DVI-I + DDI_CRT, // CRT (VGA) + DDI_LVDS, // LVDS + DDI_EDP_TO_LVDS, // eDP-to-LVDS translator chip without AMD SW init + DDI_EDP_TO_LVDS_SW, // eDP-to-LVDS translator which requires AMD SW init + DDI_AUTO_DETECT, // VBIOS auto detect connector type + DDI_UNUSED_TYPE, // UnusedType + DDI_MAX_CONNECTOR_TYPE // Not valid value, used to verify input +}; + +/* Cezanne DDI Descriptor: used for configuring display outputs */ +typedef struct __packed { + uint8_t connector_type; // see ddi_connector_type + uint8_t aux_index; // see ddi_aux_type + uint8_t hdp_index; // see ddi_hdp_type + uint8_t reserved; +} fsp_ddi_descriptor; + +/* + * Cezanne DXIO Descriptor: Used for assigning lanes to PCIe/SATA/XGBE engines, + * configure bifurcation and other settings. Beware that the lane numbers in + * here are the logical and not the physical lane numbers! + * + * Cezanne DXIO logical lane to physical PCIe lane mapping: + * + * logical | FT6 | AM4 + * --------|------------|---------------------- + * [00:03] | GPP[00:03] | GPP[00:03] + * [04:07] | GPP[04:07] | GPP[04:07]/HUB[00:03] + * [08:11] | GPP[08:11] | GFX[15:12] + * [12:15] | n/a | GFX[11:08] + * [16:23] | GFX[00:07] | GFX[07:0] + * + * Different ports mustn't overlap or be assigned to the same lane(s). Within + * ports with the same width the one with a higher start logical lane number + * needs to be assigned to a higher PCIe root port number; ports of the same + * size don't have to be assigned to consecutive PCIe root ports though. + * + * Lanes 2 and 3 can be mapped to the SATA controller on all packages; the FT6 + * platform additionally supports mapping lanes 8 and 9 to a SATA controller. + * On embedded SKUs lanes 0 and 1 can be mapped to the Gigabit Ethernet + * controllers. + */ +typedef struct __packed { + uint8_t engine_type; // See dxio_engine_type + uint8_t start_logical_lane; // Start lane of the pci device + uint8_t end_logical_lane; // End lane of the pci device + uint8_t gpio_group_id; // GPIO number used as reset + uint32_t port_present :1; // Should be TRUE if train link + uint32_t reserved_3 :7; + uint32_t device_number :5; // Desired root port device number + uint32_t function_number :3; // Desired root port function number + uint32_t link_speed_capability :2; // See dxio_link_speed_cap + uint32_t auto_spd_change :2; // See dxio_upstream_auto_speed_change + uint32_t eq_preset :4; // Gen3 equalization preset + uint32_t link_aspm :2; // See dxio_aspm_type + uint32_t link_aspm_L1_1 :1; // En/Dis root port capabilities for L1.1 + uint32_t link_aspm_L1_2 :1; // En/Dis root port capabilities for L1.2 + uint32_t clk_req :4; // See cpm_clk_req + uint8_t link_hotplug; // Currently unused by FSP + uint8_t slot_power_limit; // Currently unused by FSP + uint32_t slot_power_limit_scale :2; // Currently unused by FSP + uint32_t reserved_4 :6; + uint32_t link_compliance_mode :1; // Currently unused by FSP + uint32_t link_safe_mode :1; // Currently unused by FSP + uint32_t sb_link :1; // Currently unused by FSP + uint32_t clk_pm_support :1; // Currently unused by FSP + uint32_t channel_type :3; // See dxio_sata_channel_type + uint32_t turn_off_unused_lanes :1; // Power down lanes if device not present + uint8_t reserved[4]; + uint8_t phy_params[NUM_DXIO_PHY_PARAMS*2]; + uint16_t port_params[NUM_DXIO_PORT_PARAMS*2]; // key-value parameters. see dxio_port_param_type +} fsp_dxio_descriptor; + +#endif /* PI_CEZANNE_PLATFORM_DESCRIPTORS_H */ -- cgit v1.2.3