From a4da254a39cf8d2d98140c12b48b3163192594dd Mon Sep 17 00:00:00 2001 From: Zheng Bao Date: Thu, 20 Jan 2011 05:59:22 +0000 Subject: S3 feanture of SB800. Compiliant with SB700. Signed-off-by: Zheng Bao Acked-by: Zheng Bao git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6280 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/southbridge/amd/sb800/early_setup.c | 50 +++++++++++++++++++++++++++++++++ src/southbridge/amd/sb800/sb800.h | 8 +++++- 2 files changed, 57 insertions(+), 1 deletion(-) diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index e9325043b5..248b1f5082 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -646,4 +646,54 @@ static int smbus_read_byte(u32 device, u32 address) { return do_smbus_read_byte(SMBUS_IO_BASE, device, address); } + +int s3_save_nvram_early(u32 dword, int size, int nvram_pos) { + int i; + printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos); + + for (i = 0; i>(8 * i)) & 0xff , BIOSRAM_DATA); + nvram_pos++; + } + + return nvram_pos; +} + +int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) { + u32 data = *old_dword; + int i; + for (i = 0; i> 10) == 3); +} +#endif + +struct cbmem_entry *get_cbmem_toc(void) { + uint32_t xdata = 0; + int xnvram_pos = 0xfc, xi; + for (xi = 0; xi<4; xi++) { + outb(xnvram_pos, BIOSRAM_INDEX); + xdata &= ~(0xff << (xi * 8)); + xdata |= inb(BIOSRAM_DATA) << (xi *8); + xnvram_pos++; + } + return (struct cbmem_entry *) xdata; +} + #endif diff --git a/src/southbridge/amd/sb800/sb800.h b/src/southbridge/amd/sb800/sb800.h index 870e36ad97..cd9fb9ba9c 100644 --- a/src/southbridge/amd/sb800/sb800.h +++ b/src/southbridge/amd/sb800/sb800.h @@ -24,6 +24,8 @@ #include "chip.h" /* Power management index/data registers */ +#define BIOSRAM_INDEX 0xcd4 +#define BIOSRAM_DATA 0xcd5 #define PM_INDEX 0xcd6 #define PM_DATA 0xcd7 #define PM2_INDEX 0xcd0 @@ -47,6 +49,8 @@ extern void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val); #define REV_SB800_A11 0x11 #define REV_SB800_A12 0x12 +void sb800_enable(device_t dev); + #ifdef __PRE_RAM__ void sb800_lpc_port80(void); void sb800_pci_port80(void); @@ -55,7 +59,9 @@ void sb800_clk_output_48Mhz(void); /* void sb800_setup_sata_phys(struct device *dev); */ #endif -void sb800_enable(device_t dev); +int s3_save_nvram_early(u32 dword, int size, int nvram_pos); +int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos); + void sb800_enable_usbdebug(unsigned int port); #endif /* SB800_H */ -- cgit v1.2.3