From a4412d68d50f27fea65ef4c83e43ab89aa27bf95 Mon Sep 17 00:00:00 2001 From: Ronak Kanabar Date: Mon, 4 May 2020 17:08:03 +0530 Subject: soc/intel/jasperlake: Allow SD card power enable polarity configuration SdCardPowerEnableActiveHigh is a UPD which controls polarity of SD card power enable pin. Setting it 1 will set polarity of this pin as Active high. This patch will allow to control it from devicetree so that it can be set as per each board's requirement. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD value from FSP log Signed-off-by: Ronak Kanabar Change-Id: Id777a262651689952a217875e6606f67855fc2f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41027 Reviewed-by: Aamir Bohra Reviewed-by: Karthik Ramasubramanian Reviewed-by: V Sowmya Reviewed-by: Maulik V Vaghela Tested-by: build bot (Jenkins) --- src/soc/intel/jasperlake/fsp_params.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/src/soc/intel/jasperlake/fsp_params.c b/src/soc/intel/jasperlake/fsp_params.c index f525fd8af1..28dccabb10 100644 --- a/src/soc/intel/jasperlake/fsp_params.c +++ b/src/soc/intel/jasperlake/fsp_params.c @@ -136,10 +136,12 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) /* SDCard related configuration */ dev = pcidev_path_on_root(PCH_DEVFN_SDCARD); - if (!dev) + if (!dev) { params->ScsSdCardEnabled = 0; - else + } else { params->ScsSdCardEnabled = dev->enabled; + params->SdCardPowerEnableActiveHigh = config->SdCardPowerEnableActiveHigh; + } params->Device4Enable = config->Device4Enable; -- cgit v1.2.3